321 modeli
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
The 3mf file has the seams distributed a little bit to check their impact. My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok. Just print it and see if yours look nice. I added pauses to…
Remeixed the Fysetc Portable Input Shaper Mount from https://www.printables.com/de/@WhatAMess13_573337 so that they fit on a Neptune 4. The data should now be oriented correctly. I printed them with 0.2 mm layer height and support.…
Wydruk około 79,18 €–96,78 € nettoWstępna wycena jednego wariantu
The Fysetc usb c input shaper devices work amazingly and are super cheap; just plug and play with no fussy wiring. I wanted a way to mount these solidly to the SV06 for measurements without using too much plastic. Came up with these…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a simple Portable Input Shaper bracket for the Bear extruder. For the X axi, the bracket take place on top of the front fan. For the Y axi you can simply use paperclips.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
A lot of thought went into this redesign. Thank you akmiller01 for the original model. What's different? Out of the way: Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
This removes the trouble of having to swap the hubs to use either the standing alone spool or the ace pro. It is oriented for kobra 3 max. In order to use it with kobra 3 or S1 Combo, you need to mirror it before printing.
New junction box with 3 inputs. The first model has only two. This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features three inputs and can be securely attached to a surface using up to four screws. Seals…
Klipper Gold Standard Model for testing INPUT SHAPER, including resonance compensation, ringing, ghosting, printer quality and general calibration. ::::PRINT SETTINGS:::: Suggested layer height: 0.2 mm. Infill: 0%. Top layers: 0. Use 1-2…
FLSUN Super Racer FYSETC Portable Input Shaper Mount. Needed: 2x M3x10mm Screws to fix Portable Input Shaper to the mount 1x M3x10mm Screw to fix support on Super Racer 1x M3 Nut to fix support on Super Racer Configuration for Klipper:…
Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…
I just wanted a way to make the input wires area a little more clean looking so I whipped this cap together. The screw holes are a bit undersized so I could drill and tap to fasten directly into the material. Print Settings 0.2 layer…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
Caps to cover XLR inputs on various devices. I decided to create these after having to put gaf tape on the inputs to keep dust and snow out of the inputs on my Zoom H6 when being used in the field. These should fit any device with XLR…
This is a PSU cover for Prusa i3 MK3 (and MK3S) that has the power input on the back. I recommend that you completely remove the PSU from your printer (including all the wires!) before attempting to install this cover. I did it with all…
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…
I built this for for a 3D printed Stratocaster build by Toaster117. I bought a DIY Stratocaster kit from Bex Gears because I was going to use everything but the body, unfortunately, the input jack was too big to fit the build. Instead of…
A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…
You can get the FYSETC Portable Input Shaper here: Aliexpress:…
X- and Y-axis mount for the portable input shaper. Y-axis mount should fit on bed with thickness of 4 mm. X-axis: depending on your fan: 2x 24 mm M3 bolts. Y-axis: 3x 16 mm M3, 2x 10 mm M3, 3x hex nuts M3, 2x M3 square nuts Print in PETG…
a nearly universal mount for a KUSBA accelerometer some times mounting the board hanging off the end is necessary for the usb cable to clear the umbilical note: the hole pattern is different to the adxl345 uses a screw to clamp to the…
Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.
If you have Umbilical Mod, you probably saw you are not able to mount an input shaper where it's supposed to be attached. Worry not ! This mod will help you doing your input shaping on the Voron V0 ! There are 2 files here : a miniSB…
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
Fysetc Portable Input Shaper mounts for Elegoo Neptune 3 Pro/Plus/Max head and bed. Use M3 screws to secure the mount to the bed or the head.
Resonance probe for input shaper calibration for the Klipper firmware based on a RP2040 Zero and a generic ADXL 345 Sensor SPI breakout board.. Wiring: RP2040 ADXL 345 GPIO 0 SDO GPIO 1 CS GPIO 2 SCL GPIO 3 SDA GND GND 3.3V VCC…
Mount for the KUSBA Input Shaper working with all Ender S1 Models. There are two mounts: One which is mounted on the extruder. You'll need to temporarily remove the M3x6 screw and use a M3x10. (see pictures) One which is mounted on the…
v400 fan shroud with a mount for the fysetc portable input shaper built in using original mounting screw plus 2 m3 bolts to mount the fysetc One version has the main mounting whole covered to cause bridging so it can be printed without…
This is the gcode for a PETG temperature tower for the Prusa MK4 with Input Shaper firmware Profile: 0.2mm SPEED (no changes) Nozzle: 0.4mm Filament: Generic PETG (no changes) The temperatures goes from 215 to 250
This is a vertical DIN rail mount for MDT's amazing cookie-like KNX field devices. I'm using it with binary input modules but it is probably compatible with the rest. If not, I have uploaded the CAD file so you can alter the dimensions…
Pre-Sliced print Parts for MK3.9/MK4
I suggest this being used not only for bed slingers, but also for any printhead. Just glue it somewhere…
Hi, I made brackets to test my Sovol SV06 Plus with standard ADXL345 chip, altered from my other PIS ADXL345 input shaper, so photos are visible there for now. All holes are measured for self tapping, no need for heated thread inserts.…
instead of putting the input shaper in the front of the extruder, this one is attached to the supports legs that hold the magnet for the bed level sensor. makes it more esthetic. features: fit for - fysetc input shaper (support ears needs…
It's smaller version of original giants (look at photos). Print with PET-G.
As you know Prusa Mini finally got Input shaping (ALPHA). It works fine on some of the printers but others get an X Homing error. I Tried couple of things but adding C Clip to the x axis worked. Tightening the X axis belt also worked, but…
This is for the FYSETC Portable Input Sensor (PIS) with RP2040 Chip that allows you to use a USB cable to connect an ADXL345 to your clipper host. Klipper has built-in support for the ADXL345 accelerometer, which can be used to measure…
When testing printing with ACE Pro I found that the original extension from https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/8-input-and-1-output-module was not as stable as I was hoping for (without using e.g. metallic tube…
This model is a functional dual-input adapter that acts as a central hub between your Creality Space Pi Plus filament dry box and your 3D printer. It is designed to take two separate PTFE tubes from the dry box and merge them into a…
another mount for a ADXL345 accelerometer for input shaper. Mounts on the gantry bar using a screw to clamp down. Works with ender 3 and ender 3 pro please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
Show off the Speed of your Mini+ unleashed! In September 2023 the Alpha PRUSA Mini+ Firmware 5.1.0-alpha including Input Shaper and other revolutionary features was released. Go flex with your new reacehorse ;) As always with high speed…
After setting up the Umbilical mod on my V0.2 Voron, i realized i don't have place for the PIS. The mounts that i found were all either fixed with screws, too small for the newer MiniSB, had the USB port on the wrong side, or were just…
Other models used heat set inserts and I did not like operating the soldering iron over my bed for something that is one time use and trash.
Compatible with FYSETC Portable Input Shaper. Print with flat surface to facing build plate.
Attached are two different mounts for two different accelerometers. One from Adafruit: https://www.adafruit.com/product/1231#technical-details One from HiLetGo (Amazon):…
New small junction box (only 45 by 80 by 50 mm) with 2 inputs. This junction box (for antenna and speaker cables) features two inputs and can be securely attached to a surface using up to four screws. Seals for both cable entries can be…
Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…
This is a case I designed after watching Nero3DPs video on using a Pi Pico for input shaper. You will need 4x M2 self tapping screws to close up the case and then an acceptable wiring loom (an ethernet cable will work great).
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on your SV06/+ Use 2x M3 heat inserts & 2x M3 5mm bolts for the accelerometer & 8mm M3 bolts for attaching to…
Slight change to the layout of the fan mount, to allow the use of the LDO Input shaper board. There are 2 versions: Display Port This version has access to the display port and the camera port, whilst still allowing the use of the LDO…
Qidi Plus4 has a single spot for the External Spool Holder. When you add the hub for the QBox, you lose the external mount. Many people have made an external double hub which lets you do both. I made a strong one, and added an arm that…
Snapmaker J1s input shaping tune wizard have a bug - not saving picked values. (FW 2.7.1) https://www.facebook.com/groups/snapmakerj1/permalink/1112429939797317/ To tune input shaping this model created. Why? There is a standard Ringing…
I use a MPU6050 to calibrate the Input Shaper of my printers, so i've modeled this to make the process easir. Just print it in the middle of the bed, then screw the MPU.
Simple ADXL345 mount that I designed for an e3d Hemera, for the purpose of running input shaper to remove resonance (ghosting) artifacts. Open SCAD file is included if you need to make adjustments (please remix if you do). Materials…
Yet another lab power supply enclosure, made from a single print without need for supports. USB C power input is attached with a drop of hot glue to the printed podestal so that my laptop power supply can be used to power this lab voltage…
I don't have M3 Heated inserts so I modified the holes to be threaded M3 holes. Can secure the KUSBA in with M3x4 screws such as https://www.amazon.ca/gp/product/B0B3J35JSS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. The original…
Don't forget to like and comment. Material: 56mm disc out of a sheet of thin cardboard. Print the background of the indicator that you want on it. 1x potentiometer 1x Servomotor (SG90, I got it out of an Arduino starter kit) 2mm thick…
I liked the idea of a nozzle mount that didn't require removing the nozzle to fit the PIS, so I made a version that works for standard v6 nozzles with a 7mm hex profile. Print settings I recommend using a 0.4 mm nozzle, 0.2mm layer…
Description A dual Z-axis upgrade solution specifically designed for the Prusa MINI/MINI+, which accurately addresses the core pain points of the single Z-axis structure + remote extrusion design — "Z-axis unevenness" and "XY-axis…
Two versions to choose from, whether you want to have the hexagons or not. Don't forget to add a bit of support, as this model is a bit "deeper" than the original to accommodate the new location of the power input: This is especially…
1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs prints best with barbs facing toward the build plate (& can likely print without supports)
The mount is made for a FYSETC Protalble Input Shaper (https://www.fysetc.com/products/fysetc-portable-input-shaper-with-rp2040-upgraded-3d-printer-parts-support-klipper-for-voron-2-4-0-1-trident?variant=41865925001391) to fit on an Sovol…
This module is part of the SIMINPUT modular button box system. Check it out here if your new! All the CAD files and detailed info are available for free on the website: siminput.com A module for a guarded switch Components required Any…
Fysetc Portable Input Shaper has specific locations for mounting holes, this mod allows you to attach it to your Voron V0.2. It needs 2 M3x6 screws so it can be secured to your carriage.
Portable Input Shaper made with an ADXL345 and RP2040-Zero. The interface.stl is designed to guide the wiring and hold the Pi. The case.stl has multiple purpose : Secure the interface part Access to the buttons (front) Show the XYZ…
Only hardware needed is 4 1in long #10-32 bolts. For assembly, first put the bevel gears into their slots in the case. next, slide the hex shafts into the bore in the gears, and finally bolt the top plate onto the main casing). Ill post a…
Uses M3 screws, that will screw in plastic to secure the ADXL to the mount Side with the rectangular dip is where the ADXL will mount. This was a request by one of my patrons, haven't tested it myself. edit: needed a little wider recessed…
The knob on my receiver was found mysteriously broken. This is a replacement knob for it. It may work with other Pioneer receivers but I've only tested it on my own model.
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
This is a driver for proper installation of a new input shaft seal. The new seal must be seated flush with the surface of the transmission casing. It is a recreation of BMW special tool 233340 (83-30-0-491-582), based on the measurements…
Credit to WhatAMess13 for the original design. I found that the screw locations for the bed mount model in their design did not line up with mine. In the course of playing around with this, I also realized that I didn't like messing…
The model should be printed somewhere on the bed where it does not interfere with the homing sequence (for exmaple front-left corner), and oriented as needed. Do not remove from the build plate. Allow the bed to cool down and mount the…
Panel Designed to be fitted into speaker cabinet, Holes are made to fit Speakon Connectors, I have not yet tested a speakon connector so be aware, Photos show my Logo which is not in the Stl file, Printed in PETG with supports on the…
BOM x2 M3 heatsets x4 M2.5 screws x2 M3 screws cat6 ethernet cord
the screws are: 2 M2.2 or M2.5 x6 for plastic self tapping 4 M2.2 or M2.5 x8 for plastic self tapping nothing special to mount it, just put a dab of hot glue on the RP2040 as this part doesnt have hole to screw it for more info on wiring…
This is a FLSun SR anti vibration resonance sensor (klipper input shaper) holder. I use the sensor/holder from/with the Creality Sonic Pad and Klipper. My other FLSun SR upgrades for high printing speeds are bimetal hotend, original…
This is a remix of these two excellent designs: Original design: https://www.printables.com/model/161906-voron-18trident24-hepa-filter-ex Remixed design (the one I ended up using for my own setup to fit my HEPA filters):…
Smaller holes and narrowed the bolt pattern to fit the M2 Self tappers included with the IS Kit.
Protect the inputs shaft of a 4L80e transmission from damage during storage.
Simple mod to test your Y axis acceleration in the middle of the bed. After print, keep your bed heating on, add 2x M3 short heat inserts and 2x M3 4/6mm cap head bolts for mounting. This should make more precise acceleration test.
Input Shaping is a great way to reduce 3D printer artifacts while also increasing the possible speed of printing. To set up Input Shaping profiles it's necessary to determine the resonant frequencies of the printer. This can be done by…
The adapter was originally designed for the Voron V0.2 Mini Stealthburner toolhead, but the added kidney slots should allow you to mount it on other toolheads as well. There are two versions of the adapter: one utilizes 2x M3x5x4heatset…
This is a compact and mobile power supply that can be operated on any Powerdelivery / QC compatible USB-C power supply or power bank. BOM: Buck Boost Converter: https://amzn.eu/d/dlvy297 PD/QC Triggermodule: https://amzn.eu/d/7sku02Q…
Just follow the creators instructions.
Tipp: Nägel durch die zwei Löcher stecken, dann hält es von alleine.
Mountingbracket for Fysetc Portable Input Shaper module to be used with Chirpy's Dragonburner Toolhead. Needs no additional parts apart from a pair of 3mm hexnuts to space the PIS Module from the bracket. Scale by .5% in x/y for ABS.
I designed this PZB input panel to use in a railsim / driver's console environmant. Switches are based on readily available components and the appearance is pretty close to what you can find in many driver's cabs of locomotives / EMUs /…
A DIN Rail mount for a Shelly i4 Switch input module. It also works for all Shelly modules in the same packaging. You will need to print a tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or…
Edit: this is for the silver PSU only! The Original Design's supplied STL files for the socket had a wrongly placed top socket holes, as found by me and multiple other commenters. UPDATE 12/5/2021: Original design seems to have…
![Voron 1.8/Trident/2.4 HEPA Filter Exhaust [Remixed fitment with 3 filament input holes]](https://media.printables.com/media/prints/426876/images/3532794_4cd38264-6965-4d17-8da1-91bd6c75d816/pxl_20230316_173042702.jpg)
