778 modeli
As soon as my Core One arrived, it was clear that the easiest way to perform many maintenance tasks is to remove the top panel, but removing and replacing the plastic pop rivets is cumbersome. The solution used for this model is to create…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
Wydruk około 14,42 €–17,62 € nettoWstępna wycena jednego wariantu
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
Wydruk około 9,32 €–11,39 € nettoWstępna wycena jednego wariantu
A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…
Wydruk około 9,31 €–11,37 € nettoWstępna wycena jednego wariantu
// Here you can find my new project which also use parts from optical drive https://www.thingiverse.com/thing:5201443 This is upgrade of my previous version I posted here.I also added second actuator without external shaft.These models…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
This is a remix between three different styles of Spool Auto Rewinders. There are multiple options for the side brackets depending on your needs/preference. Changes: Updated Shana 's sidebracket.stl to support the slightly larger axle in…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
With the release of the PP powder print sheet the XL now has a repertoire of 5 different sheets. For comfort, it's very convenient to have a dedicated storage for each type, especially during calibrations. This remix of the ArISSH can…
Wydruk około 14,71 €–17,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This external housing (new version) has space for a small standard humity / thermometer modul. You can fix it with only one 3 mm screw on a existing hole in the i3mk3s metal frame without disturbing (I hope) other moving parts. The…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use OctoPrint with a Raspberry Pi4 I already had. I started with the pi4 case from this project https://www.printables.com/model/58012-raspberry-pi4-case-for-prusa-mk3s-with-dsi-opening. Soon, however, I added the MMU2S unit…
Wydruk około 3,54 €–4,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The goal of this upgarde is to get the full print bed available, completely prevent collision and improve the thermal performance in the most foot print efficient way, to compeat with the materials capability of the Core One. I get easily…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use OctoPrint with a Raspberry Pi4 I already had. I started with the pi4 case from this project https://www.printables.com/model/58012-raspberry-pi4-case-for-prusa-mk3s-with-dsi-opening. Soon, however, I added the MMU2S unit…
Wydruk około 2,91 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Using the same 5x5mm magnets as the original, but I wanted the magnets embedded into the print just to make sure they never accidentally fall out. The magnets have a slightly looser fit than the original so they should easily slip into…
Wydruk około 4,93 €–6,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Photo Measurement Stand – Sample Platform with Scale Frame Dieser Foto-Messständer dient zum Fotografieren und Dokumentieren Objekte und Proben. Er kombiniert eine Probenplattform mit einem L-förmigen Maßstabsrahmen. Die horizontale und…
Wydruk około 6,70 €–8,19 € nettoWstępna wycena jednego wariantu
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Custom Chessboard with Extra Features This chessboard is a bit special with its optional built-in defunct Prusa Steel Sheet (MK3.x/MK4.x), allowing you to use magnetic pieces that stay put and don’t slide around during the game. Plus, you…
Updates 2023/04: Improved tolerances on the housing and made the fit a little more forgiving, as some users reported difficulties getting the housing in place (v2.1). This version also includes improved cable clips. Drawer version v2 fits…
Here you got is the first Deltaprints desk organizer designed with an integrated smartphone holder, compatible with all common phone sizes. It features multiple compartments for pens, office supplies, keys, or any little clutter that…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
Added additional versions; now includes battery holders for AA, AAA, C and 18650 cells (all printed and tested but the 18650 up to now) There is a perfect design out there like this for 18650 - couldn't find this for AA batteries.…
RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…
Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the rack, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray opening, so…
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
This is a replacement for the air stripper and baffle assembly on the Umarex Gauntlet pellet rifle. Prints in one piece, muzzle-end-down with no supports needed. I saw a noticeable decrease in firing noise after replacing the factory…
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
Tunnel for wooden trains (BRIO, Ikea LILLABO, Eichhorn etc) with an overpass crossing the mountain. This is really just a merge of the 2 source STLs, so all creative credit goes to those creators: https://www.thingiverse.com/thing:4971864…
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
Pls leave a like for the model - its a simple contribution for the work - THX Print with durable material (PETG, ASA etc.) if you want to use the GoPro connector, consider using 20%-25% infill for printing. 2 Versions available one will…
This is my first model and it worked out quite nicely. The candle will have 76mm diameter. You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough. I printed it…
If you read this, please leave a ❤! Even if you don't have the enclosure, consider printing my other version instead :) It makes the plates much easier to access Slide your extra steel sheets into the rack. Sits nice and cozy under the…
Raspberry Pi 4 Model B case with fan integrated. Needed M2,5 screws etc.. see photo for sizes. A Noctua NF-A4x10 5V fan You can connect the fan to the 5Volt circuit on the Raspberry Pi or .. as I did to the 3.3V circuit on the Raspberry…
Bring light into your prints! ✨ The Elegoo Centauri Carbon is a fantastic machine – but let’s be honest, it’s pretty dark inside . Inspired by the amazing original design from JesusFreak (huge thanks for the great model! 🙌), I created…
There are three versions, 60mm, 75mm and 90mm widths. The struts came from the Integrated Auto-Rewinder Spool Holder for Repbox. I've removed the logo and added magnets to the feet to keep them stationary. A big thank you goes to…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
💧🍴 About ⚠ The cover photo features version 1. 📸 The rack's design is based on a contoured base tray with a sloped interior. A fixed drainage spout is mounted at the lowest point of the tray, extending beyond the base's edge. When placed…
Pocket Screwdriver is a compact, portable screwdriver with built-in storage for three bits. It uses a standard drill bit extender (required) and is designed for everyday carry. Two versions are included: a single-color solid model and a…
Combined the hook into one design to allow for less scaling, and more places to attach studs
update 2026/10/05: a version for the BTT HDMI5 can be found here update 2023/07/09: moved the mounting tabs a bit outwards to make the “sturdy handles” fit between them (surely not on the 250 xD) added versions for the 250/350 (not…
These boxes are a perfect complement to NTX9's Organic Chess 2021 chess pieces. The trays that he designed are changed into boxes with lids that can be assembled into a full 8x8 chess board, so you can have everything that you need to…
This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you…
My version of integrated circuit lcd cover for prusa mk3s+ Print instructions 0.2 - 20% infill prusament petg orange and galaxy black
Case with snap on lid for OpenDTU with 0.96 OLED Display. https://github.com/tbnobody/OpenDTU This case is based on Case for OpenDTU Breakout Board by bjoerns1983 Hardware i used for this: ESP32 NodeMCU with CP2102 NRF24L01+ with…
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
UPDATE 24.11.2023 Thanks to the feedback from “chochi3D” i was able to optimize the overall stability of this spoolholder. The following changes helped improving the stability: using 2 bearings for the one-sided mounting option (can also…
Printed with PETG 0.2mm layer height, 30% infill. In the folder knob by size : all knob from each size is on the plate and the print stop to insert the nut is preseted. In the folder Individual knob : Every file is sort by size for the…
3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…
This is a 3-piece cable reel that has a print-in-place handle. It was designed for some LED Christmas lights but will work with other cables as well. If you're cable doesn't fit the holes at the inner part of the reel to hold it in place,…
I wanted to have a more narrow version to install 5 spools beside each other in the available space. Since the printer had enough printing space to produce two stands at once I decided to handle pairs with a double stand, causing the…
This is a remix of the Original Bondtech BMG Upgrade extruder to integrate the new MK3S filament sensor. Work only for Bear X axis. I did also some modifications to be friendly printable with FDM printer. I added a version of the extruder…
This is my take on the idea of a bag clip with a screw lid. The main benefit is that you don't need to take it off to get something out of the bag. Why do you want my version? You don't need a third hand to put this on since the middle…
Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…
This is an insert designed to hold everything you need to play The White Castle with the Matcha Expansion . It supports premium sleeves (up to 46.2mm x 71.2mm), and has a few design elements intended to make setup slightly easier. It…
Square Pot with Integrated Tray - all you need to do is plant your flower inside. 8 different sizes. Smallest 40x40 to 180x180. Rectangular versions (80x100, 100x140, etc.. ) available here:…
I started with the double stand by Robert Schiele, and after cutting down and testing I decided to build a stronger stand. Not as elegant as the original as it requires supports and is a slicer special, but is entirely functional. I…
Print it exactly the same as you would the original. Crosshair flat on the bed and no supports. PLA is fine.
A quick remix of the stock MMU2 Selector Plate and the tapered thread PTFE coupler from https://www.thingiverse.com/thing:1993384 I mashed these parts together as I was getting a bit tired of the stock festo coupling cutting into my PTFE…
Strong mount system for a Shark Cordless Stick Vacuum (IZ202UK), although should fit other Shark cordless vacuums too with similar handles. There are 3 integrated cable clips to manage the charging cable and position it at the top where…
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
Don't want to print? Buy from me directly! >>> Craftedcarving.com Tune your snowboard/skis at home with these clamps! 2" or 3" Clearance for all tables/workbenches Mostly 3D printed: PETG/ABS, TPU Non-Printed Items: ¼-20 Threaded Rod…
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly Axle clip is…
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
This versatile 3D-printable wall vase is designed for both wall mounting and standalone use. Whether you choose to hang it on your wall or place it on a flat surface, this vase adds a touch of elegance to any room. Features:…
Corne Highpro Case With Integrated Plate Files included for both 5 and 6 column versions Required Hardware 18 x M2 heatset inserts (holes are 3.6mm diameter so most M2 inserts should work) I used…
Redesigned X-carriage for the Voron Legacy to use BLTouch probe instead of inductive probe. Also changed to use CW2 style extruder mounting. Both Stealthburner and Afterburner use the same mounting so either works. Adjusted cutouts in the…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
This a remix of VincentGroenhuis's Integrated Auto Rewinder, sized to fit jterranella's RepRewind stand so five of them can fit inside the RepBox 2. The scad is the work of VincentGroenhuis, I merely changed the dimensions to fit the…
I liked very much the model by @3Dservis for a pirate doll my wife is doing. The hinges did not convince me so that is why I modelled integrated ones.
OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…
This is a spin on Annex Engineering's Sherpa Mini extruder, just with integrated collet holder. Uses 4mm UM2 collet : UM2 Collet - Aliexpress **Note : The Step file if directly sliced may throw non-manifold edges warnings, just repair…
🆕 Update Available: A newer version of this Silica Gel Container with Integrated Hygrometer https://www.printables.com/model/1508555-silica-gel-spool-core-drying-container-4-lids-hygr Keep your materials perfectly dry and always informed.…
Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print This is a frame and stand for the wandering clock model:…
Wanted to design a fidget spinner that was low friction and completely print-in-place. The spinner is build around one of my 608 bearing designs (7 roller asymmetric cage), see https://www.thingiverse.com/thing:4876635 Clearance in the…
Hanger for dry suits with integrated boots. Hangs suit upside-down (by the boots). Useful for hosing down after a dive, or for those times when the “dry” suit didn't quite live up to its name. You can get similar ones for about a tenner…
I modified a Stealthburner toolhead board cover with fan to replace the fan with a place to mount the PCB for the 3DO Nozzle Camera. I didn't want to mount the PCB at the ADXL location and couldn't come up with a good mounting spot behind…
This is my first version of the Criss Victor (Kriss Vector). The main difference between this and the real one is: The placement of the mag, the placement of shooting mechanism and the stock Print Settings Printer Brand: Creality Printer:…
This is a drumstick. I have designed it for use with my Whamola design. All sides are rounded like a normal drumstick, nothing is flattened for 3D printing. This was achieved through the addition of included supports. Because the supports…
Stand for Oral-B electric toothbrush. Pegs for 3 toothbrushes and space for the charging dock with cutout for the wire. This is a quck and dirty remix of the original stand with 4 pegs. I only needed 3. I tried to do the changes in…
Replaces stock barrel coupler and muzzle. Install by simply dropping into the blaster once the stock muzzle and barrel coupler has been removed. Intended to work with stock barrel only. This modification removes all indexing issues…
I'm one of people who use phone case as phone protection, and when I saw CMF Phone 2 Pro, I search for information about using both case and universal cover, and found out that when using universal cover, it would be hard to use case, so…
This is a modified version of Jeoje's Voron V2.4 Z Chain Guide with Integrated Thermistor Mount . This Z chain mount allows you to install a standard 3mm thermistor to monitor chamber temperatures. Jeoje's original was designed for the…
The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks
This is an improved version of the original heliochronometer sundial base design. It allows one to level the base and make true north adjustments without any additional hardware. It is also compatible with the original heliochronometer…
I was looking for a simple yet functional business card case for... my business cards. Most of the existing ones unfortunately don't have any information about the size the cards may have. So I designed my own case and additionally gave…
Update 04.02.2020 Added split version of V5.6.1, splittet by nimaim https://www.thingiverse.com/nimaim/about Update 02.02.2020 added newer Version based on V5.6.1 of the integrated spool holder Not printed yet, but should work Please give…
Planter consists of 2 elements - main body and insertable drainage tray. I prepared 2 tray sizes. One for 100% scale and for 50% scale with fewer holes.
Why? I upgraded my VCore 3.0 to 3.1 parts, including the Oldham coupled bed arms, and I couldn't find a rear bed arm dragchain mount that fitted the new arms, combined with the “old” rear panel with the cable canal on the bottom so I…
Very sturdy computer mount on the headset of the bike. Uses existing insert or print the one I provided (wahoo or garmin). For garmin have the screws vertical, for wahoo horizontal. What makes it good for orbea integrated headset? I keeps…
I made this raised cat food dish for a friend. It has an integrated counterweight pocket. Counterweight: Slice the model. Move the layer slider to the first layer that covers the pocket. Insert a pause. When the printer pauses, insert…
Finally, keeping your batteries and volt meter in the same place cannot be any simpler. This unit employs a very simple, mini, digital, volt meter. Batteries are tested by squeezing the front 3 batteries against the internal contacts by…
The Airpods Max Waller Hanger with Integrated Oversized Magnet allows for storage of the Airpods Max headphones in a convenient location without using the cumbersome Airpods Max Case. The design of this wall hanger includes an oversized…
A simple replacement door sliding kit for IKEA intregrated fridge. The originals were badly designed. Those are probably sturdier than the one provided by IKEA you can find the door attachement bracket and the sliding rails Printed on a…
Always have two replacement golfballs and a spare golftee with you. Update 2026/07/03: Added version for bigger Tees (6 & 7 mm diameter)
10mm LED stripes mountable, cable clips for their wires and the top step is a little bit higher for sealing tape
This is a Presta valve cap with proper #10 24tpi threading to fit the valve better than other models out there. it included a filleted square hole for removing the valve core on Presta valves. I find Presta valve tools to be small, and…
