282 modeli
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Magnetic lid tailored specifically for KitchenAid mixers (4,3 l bowl). This unique accessory not only ensures a snug fit to prevent spills but also comes with a convenient filling slot, allowing you to add ingredients seamlessly while…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an easy to print storage stand for the KitchenAid Gourmet Pasta Press pasta discs and cleaning tool. (Model KSMPEXTA) I designed two versions, for 5 or 6 discs (if you decide to store one with the pasta press). Printing…
Wydruk około 8,10 €–9,90 € nettoWstępna wycena jednego wariantu
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Razor blades, and children are a bad... Now i am using this to prevent fingers in the baldes. Easy to remove when you need it..
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…
Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…
Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.
I designed this cord wrap to fit the curved back of my Kitchenaid stand mixer, but it should fit anything with a wide curve. Attach with double-sided tape or other adhesive. It should print on its side without supports, but minimal…
Happy Thanksgiving - Make those Holiday Recipes with ease with this Easy to add dry ingredient funnel to your mixing bowl while the mixer is running (or not). This offset funnel has a tool accessory post to mount onto the KitchenAid…
Although KitchenAid stand mixer is coming with an acrylic cover it does not protect you properly from nasty splashes when you mix on the highest speed (e.g. making whipped cream or butter). This is a dead simple splash guard for the 4.8 l…
Based on the original, but (1) enlarged a bit so the cord fits better and (2) used angles (no curves) so it prints w/o supports (printed on its side). I attached it with a medium size 3M Command Strip.
See my improved version 2 here ! ---------------------- Here is a clever, sleek storage solution for a stand mixer’s attachments—each piece is suspended like a kitchen gadget display! All mount neatly under a shelf and ready for action,…
A simple and easy to print stand to hold the 4 standard Kitchenaid bowl-lift or 3 head-tilt mixer attachments upright. Saves some space and keeps them organized. The head-tilt models come with a different dough hook that requires more…
KitchenAid Pasta Cutter / Roller Stand This is a simple holder for the KitchenAid pasta cutter and roller attachments that come in the 3-piece set with model number KSMPRA. The roller attachment by itself is model number KSMPSA. I am not…
Print solid using many perimeters for durability. I suggest a durable filament or resin.
It prints upright with minimal supports, just on the flat underside of the base of the funnel, with an 8mm brim to make sure everything stays in place. There are small detent beads on the funnel clip to make it removeable, but if you…
A simple method of storing the standard Kitchenaid mixer whisk, dough hook, and paddle when not in use. Ideal for renters, this is made to mount with removable 3M strips. Use PETG or ABS for best results. PLA might work, but I haven't…
Simple dual holder for kitchenaid attachments/tools with two 5mm holes for screws
A fairly simple Toolholder for the standart 3 Tools/Attachments for the KitchenAid stand mixers. even though i tried to design it to be as printable as possible, there are 3 little spots that need a bit of support. other than that it…
Replacement interlock button for KitchenAid button KCMC1575BSS1 with sturdier construction.
KitchenAid mixers have a tendency to bounce a bit while mixing. It happens when the screw in the tilt mechanism gets loose due to vibration. This screw controls the angle of the mixer head when tilted down and locked. When it loosens the…
Gedruckt mit Bambulab X1C mit AMS Beschriftung ist individuell und die STL ist Blanco Passt für den 4,8L Topf inkl. Schüsseleinsatz und schützt vor Verschmutzungen und Staub. PETG 0,2mm Layer 0,4mm Nozzle
My take on the popular KitchenAid mixer attachment holders. Can be attached under your cabinet using a 3M Command strip or a #8 flathead wood screw for a more secure installation. I've used PLA and PETG with no issues. Supports are…
I wanted an all-in-one version that was a little beefier and could be printed with increased strength by printing at a 45° angle. Printed with ASA, but other filaments should work fine. Infill: 20% gyroid Brim on; no additional supports
This is a remix of deslucht's KitchenAid Model, separated parts on Thingiverse: https://www.thingiverse.com/thing:4705694 . The print file is arranged to enable a filament color change. Unfortunately this orientation uses more supporting…
I whipped this up before even checking to see if some were already available. The others available are likely fine, but I figured I'd upload mine as well since I already made it. It's a tight, press on fit. I printed mine with PolyMaker…
This post will fit the mounting holes for Kitchenaid mixer attachments (e.g. whisk, beater, etc.). I attached it to the underside of a cabinet with Command strips, and used it to hold the attachments vertically. It may work to hold the…
This is a remix of DownRight's KitchenAid Stand Mixer attachment hanger. One of the models you can print as a single piece. The other models allow you to orient the pegs at 45 degrees and print the pegs in one piece. Also you can install…
Remix of the cord hook to fit the contour on the back of a KitchenAid Artisan stand mixer.
This printable cord wrap is designed specifically for the KitchenAid Professional 600 Series stand mixers, including the KP26M9XCOB and other 6‑quart bowl‑lift models with the same rear housing shape. The mount attaches to the back of the…
Replacement wheels for KitchenAid lower dish rack. Recommend PETG or ABS Model number: KDTE204ESS2
I have printed a bunch of different Kitchenaid stand mixer accessory hangers before, and most of the break because of the orientation of the layer lines and the twisting force you usually need to apply to get the things to hang properly.…
Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer. Single piece print. The two countersunk holes are sized for #8 wood screw but a #6 will also work. I've found adhesives tend to come unstuck in…
I had to repair our Kitchenaid mixer during lockdown with no access to a parts supplier. This little gear did the trick. The OEM part is nylon and designed to fail if overstressed, thereby saving the rest of the gear train. It's an easy…
The part often fails because it is designed to break if the shredder is overloaded to prevent damage to the drive. Printed in PETG with supports.
KitchenAid Professional 600 Cord Holder. Place to coil up the cord instead of wrapping it around the neck of the mixer. Prints as 3 pieces, no supports required. Any filament can be used. Uses 2 M3 20 Hex heads to assemble. Base piece can…
If you find this useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Retaining ring / nut for KitchenAid stand mixer attachment, Food Grinder (FGA-2). Depending on the tolerances of your printer, it may be…
Water Dispenser lever for KitchenAid and other fridges This lever allows for dispensing of crisp cold water using one hand. Tested on KitchenAid model KBFS22EWMS but the same model is branded under Whirlpool and Frigidaire. Bracket part…
This is a replacement cover for a Kitchenaid mixer's attachment port. A friend of mine lost his and I offered to model and print a replacement. This fits my new "Classic Plus" as well as a ~15 year old "Artisan" I tried at my parents…
The motor fan on my KitchenAid stand mixer broke and it's not available as a replacement part, so I designed one in Fusion. My mixer is a 6qt Professional model # KP26M1XLC. The design is fully parametric, so it should be adaptable to…
Der KitchenAid Zubehör Halter ist so designt, dass man es auf dem Prusa Mini drucken kann. Den Halter kann man z.b unter einen Küchenschrank oder einem Gewürzregal hängen. Die zwei Platten werden mit Holzschrauben z.b. 3,5x10 fest…
This is a replacement foot for a Kitchenaid stand mixer. I lost one during a move and my mixer almost threw itself off the counter while kneading some bread dough, so I designed this to print in TPU as a replacement. I printed mine with a…
This is a very simple replacement knob for the KitchenAid stand mixer. I expect this to fit multiple mixers, however, it is designed to resemble the OEM part from my bowl lift stand mixer. If you use this part for a different stand mixer…
I wanted a fairly accurate replacement knob for the tilt lock on our Kitchenaid stand mixer. Mostly just an excuse to practice with Fusion 360. Printed in black Sunlu PLA with a 0.1 mm layer height, stem down, with snug supports.
Print in PETG for strength. I use thick double-sided tape to adhere it to the countertop. You might need to orient it diagonally in your slicer so that it fits on your printer bed.
An STL of the KitchenAid mixer gasket on models like the KSM-90. CHECK THE MEASUREMENTS BEFORE PRINTING! It worked as-is on my KSM-90 from 1992, but some folks have reported needing to scale it to 106-107% in the slicer to get a proper…
I really liked the pasta roller stand by afazzari, but I wanted something to cover it, so I whipped up a quick model. In order to completely cover the base, you need a printer that can print at least 258mm tall. Alternatively, you can…
KitchenAid Mixer Attachment Holder. I needed a way to store attachments other than jumbling them up in the cabinet. I had space above the KitchenAid so let's put them up there! Printed well in PLA without supports. Plenty sturdy at 20%…
Replacement Stove knobs for my KitchenAid Oven after my dog chewed up the originals. If you need a knob you can check the attached photos of the original and this replacement to see if yours matches. Print instructions Category:…
Print in High Temperature filament like PETG or ABS or better ------------------------------------------------------------------------------------- Bought a broken mixer of Marketplace for dirt cheap, hoping I could fix it. Found that the…
Hanger for Kitchenaid tools that clamps and slides on a wire shelf. Used the hanger design from iplop: https://www.printables.com/model/137344-kitchenaid-attachment-hanger The shelf I own is pretty common in the USA. It has 3mm wire every…
Made this for a colleague and it might be useful for someone else.
I dropped the food Pusher one time on a tile floor and it cracked. I couldn't find a design so I made this in Fusion 360. I printed mine with 5 walls with a 0.6mm nozzle which was almost 100% solid. Printed without supports.
Its a hanger organiser for the older Shredder/grater attachments from kitchenaid. its made for 6 of them. i have not included screw holes couse i had planed to use it with command strips but in the end screwing it to the bord was the…
Printed with P1S at 100% infill, 0.4mm nozzle, and 0.2 mm layer height.
Have you ever wanted to hang your KitchenAid Stand Mixer attachments from this specific wine glass rack? Yeah, me too. The adapters won't rotate or lift out of place. Includes a mount for all mixer hooks and another for the ice cream…
After building a very crude version of this tumbler to polish up some bronzefill dice I made I revisited the idea to make this more clean looking version. This requires a very small amount of materials to make and there will be a version…
KitchenAid Pasta press tagliatelle form Print instructions Category: Kitchen & Dining
Cover for the accesory hub on KitchenAid mixer. Has alignment markers, useful if you wish to add your own logo to the front and maintain orientation. Should be good for any model of KitchenAid mixer, but I modeled the alignment markers…
I often make muffin mix and would pour it into the forms. Unfortunately none of the metal bowls come with a spout, and I didn't want glass or ceramic. I put a shrink cable sleeve on the two pieces that grab onto the bowl. Printed it PetG…
Included is a 2, 4, and 8 paddle option. The primary purpose for this beater is to beat heavy cream for making whipped cream or butter out of. Suggested print settings: Infill: 20%+ supports: yes bed adhesion: at least 10mm brim with…
This is a remix of fns720's KitchenAid splash guards for the artisan series mixers. I have resized the model to fit the larger 5QT pro series mixers as well as included the original size for artisan mixers. I would recommend printing in…
Replacement tine pivot clip used for some Jenn-Air, Kenmore, KitchenAid, LG, Maytag, and Whirlpool dishwasher models. Directly Replaces: WPW10082853, W10082853, WPW10082853VP, SAPW10082853, 1446946, AP6014920, AP4262208, AH1734891,…
A simple holder for your KitchenAid hand blender. I designe´d it for someone else. So I have no picture of the blender inside the holder. But it supposedly fits very well. Hole spacing is 50 mm. (I used 2 4,5 mm wood screws) -> Just screw…
Compact caddy for the Kitchenaid extruder set. Includes storage for: 6 dies Extruder Dough pusher Cleaning tool
The Kitchenaid Artisan is a very nice and durable kitchen machine. But the thumb screw, which is used to secure attachment parts, is unfortunately not that durable. A replacement part for this very simple 8mm steel bolt with an inch…
Uses the screw in the back that holds the metal rim in place. May fit on other bowl lift stand mixers but not tested. No supports needed print with .4 nozzle can be printed in pla, petg or tpu(when using tpu do not wrap cord as tightly or…
Poussoir de remplacement pour robot KitchenAid.
This is a remix of most popular KitchenAid Artisan splash guard. I wanted to add a slot which will snap to the bowl edge
This is a mount for holding KitchenAid mixer attachments that snaps onto the front bars of standard pantry shelves. I made them out of clear PETG. I printed it with the knob facing up, I had supports for the rod that the attachments mate…
I modified the original model to have a stronger fillet at the base of the pole to improve solidity
If you have lost your front cover, this is now the opportunity to simply print a new one. Wenn sie ihren Frontdeckel verloren haben, ist das jetzt die Möglichkeit sich einfach einen neuen zu drucken. Printed in PLA - 100% Infill
updated description 12/15/2025 - This is a 3D-printable splash guard designed to fit KitchenAid 6-quart bowl-lift mixers . It helps prevent ingredients like flour, sugar, and liquids from splashing out of the bowl during mixing, keeping…
I made different Models for differnt attachments. I used the one for Two-sided tape. In my case the strongest from Tesa.
This is a replacement for the Pusher for a 5KSM2FPA Food processor which broke. It's not a copy but an in my view improved design. => it's much more robust than the original which just broke as accidentally was dropped => it's closed on…
I printed this on its side, scaled up from the orginal 15% in the X and Y axes. It fits my cable fine, but if you move your mixer around a lot, you may want to scale it down 1-2% for a tighter fit.
I wanted to design a small kitchenAid as a birthday gift for my girlfriend :-) Here it is, print it with standard support and it should come out nicely! I printed mine with 15% infill, but its up to you I guess ;-) Category: 3D Printing
I had a bunch of these whisk attachments left over from past hand mixers. This print turns them into normal hand whisks. Print them in PETG if you plan to put them into the dishwasher or use them to mix hot liquids. They have internal…
Recommended to use PETG/ABS, something more thermally resistant than PLA 3+ perimeters for a stronger print Use of a little CA glue to keep them attached works like a charm!
Simple stand with 3 slots that perfectly fits your kitchenaid dough hook, whisk and paddle attachments. Optional but I suggest adding some self-adhesive rubber feet at the bottom to stop it from sliding. Thank you! If you wish to show…
I got a report that the toaster knob in the kitchen broke this morning. It's broken all right. I took a couple of measurements and spun up 3d builder and I think it's pretty close. Fits perfect the first time, even has the taper and the…
Kitchenaid Pasta roller attachement storage helper. I created this to be able to store the pasta roller efficiently near my kitchenaid. v1 is the one on the pictures. v2 ATTENTION! This is not tested! I improved v1 to make it a bit…
My wife recently got into watching a LOT of Masterchef, and she decided that she wanted to start making homemade pasta. Never one to interfere with my wife's culinary ambitions, I bought her the Kitchenaid Pasta Deluxe 5-piece set, and…
A simple shelf that fits on the inside of (most) cabinet doors and which can hang two kitchenaid attachments. Originally it was designed to be secured to the wall or cabinet with several countersunk screws but it also works well using…
This is a replacement foot for the KitchenAid K45SS Stand Mixer. It was printed using Ninja Flex using the Generic Flex profile with a .60 nozzle. I added a 4x18mm flange to the base to allow more of the mixers frame to contact the foot.
Churro Disk for Kitchenaid Cookie Press. 57mm disk, Churro opening is 30mm wide at the widest and 10mm in the center, 2mm thick. Made with PETG so hand wash. I have had PETG warp in the Dishwasher. The Disk with the hole it in will give…
This model enables you to drive a cheap pasta machine from amazon like this one…
Use any material to print. Orient with the closed inner part down
Das original Modell vom Deckel kippte immer nach oben oder fiel ganz ab. Habe den Deckel jetzt so geändert das er plan aufliegt und nicht mehr runterfällt…
I have been working on building a candy panning machine for coating gummies, nuts, etc. While searching, I came across a youtube video that referenced the below reference models to build a cheap candy panning machine build from items…
Simple mount designed for KitchenAid attachments. It only requires 1 screw. The screw hole diameter is 4mm and countersunk.
This is a replacement knob for the KitchenAid stand mixer. It was designed with tight tolerances to eliminate the need for glue, I used a hammer to get the screw part inside. supports are needed around the edge. Don't forget to like and…
Replacement Retaining Ring for the kitchen aid FGA-2 food grinder… The model is heavily influenced by cdmakerstuff's model but with a larger tread pitch. I don't know why i needed a larger thread pitch (4mm) but suspects that Kitchen aid…
The replacement nut for KitchenAid Pasta Press 5KSMPEXTA. Release 04/05/2024 Adding KitchenaidNut.step file. 07/03/2025 Adding KitchenaidTemplateScrew.step and KitchenaidTemplateScrew.stl files. Print Settings Printer Brand: Prusa…
Mount for Kitchenaid stand mixer beater & accessories. Attach with adhesive or mount with a wood screw. Made with PLA. Lasted a year so far!
KitchenAid Bowl organizer. Has multiple attachment options. Attaching arms bolt with M3 screws. Able to adjust location of accessory mounts depending on size of attachment.
I made this replacement part for the KitchenAid glass bowl. Share your prints! :-) Category: 3D Printing
Kitchen Aid attachment under cabinet mount, printed using Polymaker Polyterra PLA+ at .16 layer height and 25% infill.
This model is a remix of https://www.thingiverse.com/thing:4340836 which itself is a remix of https://www.thingiverse.com/thing:3252061 . This is a mount for KitchenAid stand mixer accessories which is intended to have an embedded magnet,…
