Wyniki wyszukiwania: labs

Sortowanie

819 modeli

P
PrintablesKlaus

Formlabs Form1 and Form1+ 3D printed resin tray

I got tired of both the quality and the price of Formlabs Form1+ resin trays, and figured I'd try out if a 3d printed tray was plausible. Turns out it works great! I made it so it utilizes a 4mm glass sheet on the bottom. This solves the…

Wydruk około 9,38 €–11,47 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
4
Ocena
0
P
PrintablesPrints&Kinks

@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.

Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…

Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
64
Polubienia
6
Ocena
0
P
PrintablesLaceSpades

A Sturdy Nozzle Holder From A Free Nylon Formlabs Sample Case

While checking out the Fuse 1 from Formlabs, I spotted that they offered a variety of sample prints done on the machine to check out the quality for no cost and no shipping. After evaluating the nylon 12 case linked below, you can make…

Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu

Pobrania
64
Polubienia
12
Ocena
0
P
PrintablesScott Gibb

Form Labs Form 2 Foot Adjuster

I recently got gifted a Form Labs Form 2 Resin SLA Printer. It was great however, there was a resin spill and some of the parts were missing. One of these parts was the feet adjusters. So i decided to CAD one up and 3d print it using my…

Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
56
Polubienia
5
Ocena
0
P
PrintablesDylan C

Shellington Labs Kirin Plungerhead

This is a replacment plungerhead for the Shellington Labs Kirin Type A. A friend has the blaster and their plungerhead cracked. This model was quickly thrown together and printed with PETG as a replacement part. The printed part has been…

Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
36
Polubienia
0
Ocena
0
P
PrintablesDad2Earthlings

Crunch Labs month 7 display

I'm building simple display units for every month of the crunch lab engineering box, I only started with this one because this one was on the floor in my way No supports needed, I did 10% infill

Wydruk około 4,42 €–5,41 € nettoWstępna wycena jednego wariantu

Pobrania
29
Polubienia
7
Ocena
0
P
PrintablesFlashL

Thorlabs Cage system 6 mm rod organizer

Organizer for your 6mm rods from Thorlabs.

Wydruk około 20,94 €–25,60 € nettoWstępna wycena jednego wariantu

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesCody Jarvis

"PrintBed" BambuLabs Spool Adapter

"PrintBed" Brand Adapter for Bambu Labs Spools: Seamless filament feeding for smooth 3D printing.

Wydruk około 5,37 €–6,56 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesCoffey72

Bambu labs Tool Box X1C P1P (the original)

I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…

Pobrania
12 595
Polubienia
2444
Ocena
4,89
P
PrintablesEdwin Eefting

Customizable Honeycomb Storage Wall (OpenSCAD) v2.1 Bambulabs

update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…

Pobrania
8024
Polubienia
580
Ocena
4,88
P
PrintablesJandrop

Bambu labs Tool Box X1C P1P with Bambu Logo

Descripción I just added the Bambu logo and created the m3f project ready to go. The project uses the cool plate to print the hinge and snap latch and the PEI texturized plate to create a nice texture at the top and the bottom of the box.…

Pobrania
7317
Polubienia
2220
Ocena
4,89
P
PrintablesAnonymousgoat

Dummy 13 Angle wings by Neoteclabs and Jeffrey Yang

I DID NOT MAKE THIS. I did not make this design NeoTecLabs “made” this they stole the design from Flexi Alicorn by Jeffrey Yang. but a lot of people liked what they made including me and have been asking around for the files so I am…

Pobrania
5947
Polubienia
774
Ocena
4,46
P
PrintablesSaganaki

Bambu labs Tool Box AMS & Embossed versions

Bambu Labs logo added to the lid with an AMS and an Embossed version. You also need 8 M3x20 bolts for the hinge and latches. Orginal design by Coffey72 which itself is a remix of a design by zx82net…

Pobrania
4343
Polubienia
1132
Ocena
4,89
P
PrintablesDaniel

Bambu Labs Carbon X1 Top Glass Riser for LED's

Minimalist top glass riser. PETG. (Overture PETG Black). Nothing special. Just basically used stock settings on Bambu to print this!! :D No supports necessary. Supports 8 or 10mm LED strips that stick to the inner sides. Has a 4.25mm hole…

Pobrania
3686
Polubienia
590
Ocena
4,84
P
Printableschuyskywalker

Bambu Labs Spool Desiccant Carrier

Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…

Pobrania
3004
Polubienia
329
Ocena
4,95
P
PrintablesNomad

Bambu Labs AMS Cardboard Spool Adaptor

I wasn't liking any of the spool adaptors I was finding for the AMS so I designed my own. This one snaps securely to the edge of the spool. It can easily be taken on and off the spool. I have tested it with Polymaker and Overture spools.

Pobrania
2925
Polubienia
346
Ocena
4,83
P
PrintablesPJC 3D Printing

Bambu Labs X1-C eSUN PETG Profile

01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PETG with first layer height and temperatures to suit Wham Bam PEX. Also works just as well with textured plate. After loading the .3mf there is setting changes in all 3…

Pobrania
2770
Polubienia
185
Ocena
5
P
PrintablesPILED

Bambu Labs AMS PTFE tube and cable release tool

This model combines the functionality of both an AMS PTFE tube and cable release tool into one simple small part. Can be stored hanging behind the end of the cable (see photo) ≤0.2mm layer height. 6m45s print time Also available on…

Pobrania
2535
Polubienia
145
Ocena
5
P
PrintablesTwotone74

Bambulabs X1C PTFE-Bracket - Extended Version

I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…

Pobrania
2492
Polubienia
295
Ocena
4,34
P
PrintablesLloyd Keays

Slica dry box for Bambulab AMS fitting the roller repairs suggested by bambulabs

My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…

Pobrania
2375
Polubienia
216
Ocena
4,97
P
Printablespwmodder1027

Bambu Labs Tool Box : Alt Brands

New Designs will be added as I make them. Keep an eye out for more. Wanted to include some options for branding on this box. I'll continue to add more. If there's something you'd like, leave me a comment or send a message. I will continue…

Pobrania
2251
Polubienia
795
Ocena
4,96
P
PrintablesKSB

Bambu Labs AMS lid spacer

Thank you misterpeppery. Their summery from thingivers. This spacer is designed to allow the Bambu Lab AMS to accept slightly larger diameter spools of filament with the lid closed. There are several brands of filament whose spools are…

Pobrania
2047
Polubienia
286
Ocena
4,87
P
PrintablesPaddes

AmeraLabs Town | Calibration for SLA 3D printers

Calibration test for SLA printers, may also be used for DLP or other resin 3D printers. Differing from most other calibration models, this one is also a nice display prop so it hopfully won't go straight to the bin after you printed it.…

Pobrania
1960
Polubienia
52
Ocena
5
P
PrintablesEd

Bambu Labs AMS desiccant box

This is a remix of Eldon's box, I wanted it printable flat with no supports. I also don't mind not using the default screen door so I can see if the desiccant has changed colours (I used a colour changing desiccant).

Pobrania
1657
Polubienia
229
Ocena
4,56
P
PrintablesLee David

Bambu Labs P1P POOPY SHOE

The frame and panels are different for the P1P vs X1. Remixed to fit a square corner. Sorry, I smoothed the original the best I could to reduce file size.

Pobrania
1578
Polubienia
193
Ocena
4,78
P
PrintablesDavid W

Bambu Labs MMS (Manual Material System)

This solved my biggest beef with day to day management of manual filament changes. Yes I have AMS units on numerous machines. but for some I stick with manual. I periodically make updates to this file. I mostly use Makerwold and the only…

Pobrania
1271
Polubienia
1222
Ocena
4,75
P
PrintablesMaster Gadget

Bambu Labs A1 MINI

PRINT OFF A A1 PRINT A BAMBU LABS P1P https://www.printables.com/model/552429-the-original-bambu-lab-p1p FIND MORE OF MY MODELS https://www.printables.com/@MasterGadget_1143263/models Printing instructions: SUPPORTS YES INFILL 25% Support…

Pobrania
1243
Polubienia
57
Ocena
5
P
Printablesbkilian

Small spool adapter ring for Bambu Labs AMS

I tried a number of other spool adapters but my old spools are weird sizes, and I didn't want to have to fiddle with clips and try to adapt existing designs to my spools. I designed this adapter to clip right on to a spool and just work.…

Pobrania
1238
Polubienia
172
Ocena
4,88
P
PrintablesRoger Reid

Bambu Labs AMS 2-tier stand

The AMS unit seems to have 4 different version (though not documented by Bambu) V1 - #1 Kickstarter version V2 - Comes with the Combo unit (X1CC) V3 - if ordered as an additional AMS V4 - #2 Kickstarter version Like I say, this is not…

Pobrania
1234
Polubienia
273
Ocena
5
P
Printablesmrfixit

Hotend plug removal tool for Bambu Labs X1 printer.

This simple tool makes it a bit easier to remove the plugs from the hotend without damaging any wiring, or putting undue strain on the printhead. The tool is used as follows. :- Heater: slide it over the plug and pull. Fan: push it over…

Pobrania
1127
Polubienia
225
Ocena
4,81
P
PrintablesPJC 3D Printing

Bambu Labs X1-C eSUN TPU95A Profile

Bambu Studio settings tuned for eSUN TPU 95A. After loading the .3mf there is setting changes in all 3 sections which interact to produce the end result. If you just use the comparison charts to make your own adjustments please still…

Pobrania
1116
Polubienia
86
Ocena
4
P
PrintablesStellar5

BambuLabs Logo Poop Bin - 6mm magnets

Catch that filament poop! This is a small, minimal poop basket remix in which I made only two simple changes: Magnet holes have been adapted for 6mm x 3mm magnets The BambuLabs logo has been embedded on the outside of the bin 3 versions…

Pobrania
1109
Polubienia
124
Ocena
4,83
P
PrintablesWolfie3D

Bambu Labs X1C Exhuast Adapter

Bambu Lab X1C Exhuast Adapter for 75.5mm rubber cuff. Pictures show orange PLA at 0.28mm layerheigt (adaptive). Use a standard m3 thread tap to thread the three unoccupied holes with minimal damage (no drilling required). There is space…

Pobrania
1077
Polubienia
293
Ocena
4,75
P
PrintablesBanditFPVprints

Bambu labs 3D Printed RC plane configs

Configs with recommended PrusaSlicer configs into Bambu Studio specifically for 3D Lab Print models - does not work for Cura Surface mode models, not available in Bambu Studio. Internal structure correctly prints :)! See json files in…

Pobrania
1035
Polubienia
41
Ocena
5
P
PrintablesPC-Tech

Sunlu Spool Adapter for Bambu Labs AMS

Sunlu Spool Adapter for the Bambu Labs AMS. I had a 5 pack of the small Sunlu PETG and wanted to use them in the AMS. The Adapter keys onto the Sunlu Spool. Added a V2 version: Thicken the rails for better stability Thicken the threads to…

Pobrania
970
Polubienia
107
Ocena
4,64
P
Printablesqwertypo

Build Plate Guide Extensions for Bambu Labs X1 and P1 printers

I installed my plate so it was slighty resting on the lip of the guide… So I wanted something to make it unlikely to repeat in the future. These clips snap on and bring the height of table plate guides up just enough to make it easy to…

Pobrania
918
Polubienia
140
Ocena
4,45
P
Printables75echo

Bambu labs refillable carbon filter cartridge

Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…

Pobrania
897
Polubienia
185
Ocena
4,88
P
PrintablesShahbaz Fazal

Bambu Labs Splined Spool (and ReSpooling spool)

Wanted to reduce the amount of filament used compared to the hex version. wanted to be able to see the amount of filament remaining, a space for the filament sticker, and an “attractive“ design, something a little different. managed to…

Pobrania
891
Polubienia
115
Ocena
4,62
P
Printablesaonomus

Bambu Labs X1 Carbon - Gridfinity Base Plate

This model has a few design features and is somewhat WIP. Suggestions welcome, but there are only so many hours in the day to work on this. Features: Deep-pockets a bottom layer - this helps prevent any kind of dropped components from…

Pobrania
878
Polubienia
290
Ocena
4,8
P
PrintablesThomas Lord

Bambu Labs P1P\P1S\X1C Magnetic Hydrometer Mount

This is a magnetic hydrometer mount for enclosed Bambu Lab printers. It was designed for a 40mm hydrometer and uses 2 6x3 magnets. The magnets should press fit in (with some elbow grease) and it mounts to the rails on the sides of the…

Pobrania
828
Polubienia
180
Ocena
5

Bambu Labs P1S / P1P / X1C Lid Prop / Riser

UPDATE 2023-12-23 - Thanks to everybody for the makes and ratings! I've added a “Tighter” version which makes the slot a touch shorter for a tighter fit. Try this if you feel the standard one is too loose. ---- A small prop that attaches…

Pobrania
823
Polubienia
79
Ocena
4,94
P
PrintablesWagZ

Bambu Labs P1P Modified LED light bar mount

so yah, as title says, this is basically a remix I designed. I took the light bar dimensions and whatnot and then made this model based on my likings. The one that BL suggests printing points the LED's at a strait across angle. basically…

Pobrania
806
Polubienia
79
Ocena
5
P
PrintablesAero3D

Bambu Labs x5 Plate Holder

This is a simple remix of the 3-plate holder adapted to hold 5 (five) Bambu build plates. I have also added 10mm diameter recesses in the base to allow the fitting of self-adhesive rubber bumper stops, if desired. I have also included a…

Pobrania
761
Polubienia
79
Ocena
4,8
P
PrintablesPrinter J

BambuLabs X1/X1C Improved Rear Spool Holder

With the stock metal rear spool holder I would sometimes get a squealing noise as my plastic spool would turn on it. I decided to design an improved holder so that I could avoid those noises. This improved spool holder reduces friction as…

Pobrania
741
Polubienia
119
Ocena
4,33

Remix of Bambu Labs Carbon POOPY SHOE Remixed to make it deeper

Remixed @ RAMServices1959 from Thingiverse to make it slightly deeper to allow for purge waste to fit in for longer prints. Doesn't need supports to print. if having trouble fitting on the print bed in Bambu slicer right click on the…

Pobrania
727
Polubienia
55
Ocena
4,8
P
PrintablesTony,H

Bambu Labs X1/P1P Larger Toolbox

I made 2 versions V1: Will fit 8 accessory boxes and a few bigger compartments but not adapted for gluestick V2 : Will fit 8 accessory boxes and many small compartments and one adapted for gluesticks I used 6 x M3 25mm screws

Pobrania
717
Polubienia
179
Ocena
5
P
PrintablesAngelRa

Bambu Labs filament spool reduced to print in an A1 Mini

Spool for Bambu Labs filament refills with external diameter reduced to be printable on an A1 MINI. The internal diameter is unchanged. This spool may not work on Bambu Labs large AMS and other rim roller type filament holders. The photo…

Pobrania
714
Polubienia
141
Ocena
4,67

Bambu Labs extended Poop Chute magnetic with 45° extension.

I have my X1 Carbon on a IKEA KALLAX Shelving unit that is 5 cm from the wall. When the printer poops it drops it in between the wall and the KALLAX. The poop then bounces into a large container Underneath the printer. The Bambu Long Drop…

Pobrania
693
Polubienia
132
Ocena
5
P
Printablesrsdesign

Airtag Bike Saddle Mount with M3 Heatinsert for Ergon and SQLabs saddles

Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.

Pobrania
689
Polubienia
78
Ocena
5
P
PrintablesPhil Hsu

Desiccant box for Bambu Labs AMS

For Bambu Labs AMS. Can place flat on print bad. Enhanced structure.

Pobrania
685
Polubienia
47
Ocena
5
P
PrintablesTony,H

Bambu labs Tool Box

Added a few variations of the of storage compartments

Pobrania
678
Polubienia
144
Ocena
5
P
PrintablesKSB

JAYO AMS cardboard_spool_ring for Bambu Labs AMS P1P X1C

JAYO cardboard spool ring for Bambu Labs AMS P1P X1C. Had to extend the outer ring diameter giving the spool a 5mm lip. Moves smoothly in AMS. Added a TPU version for when the roll is light and PLA slips. All version will make the rolls…

Pobrania
672
Polubienia
119
Ocena
4,4
P
PrintablesBraheem24

Bambu Labs Front loading desiccant boxes for AMS with Hygrometer fits without removing filament.

Front loading desiccant boxes for AMS. These slide in and out without having to remove the filament to change out the desiccant and I also added a hole for an hygrometer. Hygrometer I used is 44mm in diameter…

Pobrania
622
Polubienia
71
Ocena
4,33
P
PrintablesJohn A. Tamplin

Small spool adapter for Bambu Labs AMS

I wanted to use some 250g spools in the AMS but none of the adapters I tried were quite right. So, I took the idea of the closest one and created a new parameterized model in Fusion 360. You should be able to generate adapters for any…

Pobrania
608
Polubienia
98
Ocena
5
P
PrintablesMyRCode

Polyterra Spool Adapter for Bambu Labs Spools

The only adjustment needed to make it fit Polyterra spools was to change the “horizontal outer diameter” to 87.

Pobrania
587
Polubienia
77
Ocena
5
P
PrintablesIronAegis

Chaotic Labs CNC Tap v2 X Endstop Trigger

Printed with standard Voron settings: Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic Wall count: 4 Solid top/bottom layers: 5 Supports: NONE

Pobrania
586
Polubienia
43
Ocena
4,89
P
PrintablesTony

Gridfinity Bambu Labs Filament Swatch Holder

I did not see a holder for the official Bambu filament swatches that I liked, so I made this one. Included is 3u and 4u height configurations. There are 2 ROW and 3 ROW configuration's. I prefer the 2 ROW because its easier to remove the…

Pobrania
566
Polubienia
44
Ocena
5
P
PrintablesDor_debi

Bambu labs poop shoot

the model by Enrico Pulvirenti but without the Bambo logo

Pobrania
558
Polubienia
30
Ocena
5
P
Printablesramservices

POOPY SHOE\Bucket The original for Bambu Labs X1C

Simple collection bin for the Bambu Labs ejection material chute. Printed on the Bambu Labs X1 Carbon PLA settings No support. also found on https://www.thingiverse.com/thing:5745129 Have Fun

Pobrania
552
Polubienia
17
Ocena
0
P
PrintablesJeff Brown

Bambu Labs P1P X1 X1C Toilet

Here are three sizes of Toilet for the Bambu Labs printers "poop chute." The small one is really too small to be effective, but is kind of cool on the fridge, where mine is now. The medium is what I use on my P1P that only does single…

Pobrania
550
Polubienia
123
Ocena
5
P
Printablesmobiobi

Bambu Labs Hotend LED Coloured Insert

Fortunately there is just over 10mm of space in front of the LEDs on the hotend, more than enough space to slide in something to add a bit of colour. Printed with settings leaning towards this , though not as critical to get it all the…

Pobrania
543
Polubienia
238
Ocena
4,89
P
PrintablesMushbrandon

Bambu Labs X1 Magnetically Detachable 4 inch Ventilation Ducting Adapter

This adapter features an exhaust interface part that is secured by VHB tape around the exhaust vent on the back of the X1. Fastened on top of it is a TPU gasket part containing magnets. The magnets allow this part to connect with a part…

Pobrania
542
Polubienia
163
Ocena
5
P
PrintablesTreesmacker

Bambu Labs AMS 4 color test chip

This is a 1mm thick model with four separate objects that can easily be colored in slicer software. It is suggested to be printed at .2mm layers resulting in 16 color filament changes which should be enough to test basic operation of the…

Pobrania
539
Polubienia
14
Ocena
5
P
Printablesaddohm

Bambu Labs X1 Carbon Poop Chute REMIX Magnetic

These modifications were done inside of Prusaslicer.

Pobrania
500
Polubienia
19
Ocena
5
P
PrintablesFatlab

Magnetic Hygrometer Mount for Bambu Labs X1/P1s/P1P printer (10mm magnets)

Remixed version of a magnetic hygrometer mount for Bambu Labs X1/P1s/P1P printer with push-fit holes for 10mm magnets

Pobrania
500
Polubienia
104
Ocena
4,86
P
Printablesrsilvers

Wednesday Thing with color information for BambuLabs printer

I painted this model so you can print it in color on a BambuLabs printer.

Pobrania
493
Polubienia
65
Ocena
5
P
PrintablesDan Landrum

Bambu Labs X1C/P1P Anti-Vibration Feet Stabilizers

This works with the official Anti-Vibration Feet to help stabilize the printer. I found with just the official feet the printer was really wobbly. Sometimes the feet would fold over. I printed my set with tpu with 1 layer outside and 10%…

Pobrania
487
Polubienia
71
Ocena
5
P
PrintablesAndy Collins

Triangle Labs CHC Pro Hotend

Triangle Labs CHC Pro Hotend step file model. Made as I could not find one and needed it to modify mounting parts

Pobrania
476
Polubienia
28
Ocena
5
P
PrintablesThomas

GST3D / IIID Max Spool Ring for Bambu Labs AMS (+ Hydra Mod)

While the filament form GST3D is super cheap and works pretty well I had a lot of trouble together with the Bambu Lab AMS. I have the Hydra Mod, But I assume the same problems are true for the vanilla version. There is a ring adapter, but…

Pobrania
472
Polubienia
48
Ocena
5

Rugged Bambu Labs Box (Fixed to work better and has an actual embossed top)

I had to print this a few times but it works perfectly now. The other latches don't pivot so you can't open them very easily. The one listed on the main files is not embossed they are protruding. Mine is truly embossed and printed so well…

Pobrania
469
Polubienia
98
Ocena
4,67
P
PrintablesStealinglight

Bambu Labs Compact Accessories Box

A smaller sized accessory box aimed to fit most of the accessories that the bambu printers are shipped with. The lid is a slide on design because i wanted something that can stand open without taking up too much space but still be able to…

Pobrania
469
Polubienia
51
Ocena
5
P
PrintablesTakarii

Printable Hex Filament Spool (Fits On Bambu Labs A1 MINI)

Fits in 180x180x180 bed size. Looks nice too. Perfect size for printing on A1 mini. Fits on Bambu Labs A1 MINI

Pobrania
464
Polubienia
59
Ocena
5
P
Printablesflackenstein

Yet another Bambu Labs X1 Filament Splitter

This is yet another Bambu Labs X1 filament splitter supporting external filament source and AMS without requiring the ptfe tube to be removed from the back of the X1. Had issues with other splitters so I designed this one to allow for…

Pobrania
437
Polubienia
79
Ocena
0
P
PrintablesLorenzoDL

IN-12 Nixie Clock by DelucaLabs

Nixie_ldl_clock IN-12 description GitHub project repository: https://github.com/lorenzo-dl/NIXIE_LDL_CLOCK Nixie tubes are a vintage type of display that uses a glass tube filled with a low-pressure mixture of Neon and other gasses like…

Pobrania
426
Polubienia
97
Ocena
5
P
Printablesrc2k7

Bambu Labs A1 Mini 60% Purge Profile

!! USE AT YOUR OWN RISK !! This is a modified profile implementing 60% purge changes into the original A1 Mini gcode.

Pobrania
421
Polubienia
70
Ocena
5
P
PrintablesCHAOSDRUCKER

AMS Wall Mount - Wandhalterung BambuLabs

ENG: This is a wall mount for an AMS from BambuLabs. This is used to mount one or more AMS on top of each other or side by side on the wall. This can be useful if you have very little space and still want to use the work surface under the…

Pobrania
409
Polubienia
126
Ocena
5
P
PrintablesRavenwreck

Bambu labs X1C build plate holder with sideloading

Needed a build plate holder that can be loaded from the side so I can put it on a shelf that has another shelf above it. Holds 5 regular thickness Bambu labs X1/X1C/P1P plates. STEP file included.

Pobrania
393
Polubienia
24
Ocena
5
P
Printablesnathanmfast

Bambu Labs Reusable Spool (Splined)

WARNING After using these for some time it has become clear that the sides are too flimsy - as the spool turns you can get filament stuck down the sides. I've had several prints that were very painful to finish because they repeatedly…

Pobrania
381
Polubienia
48
Ocena
5
P
PrintablesSkyGuy

Bambu Labs P1P iPhone Holder

The P1P is an awesome printer, but the screen sucks! Particularly the numerous menu items you need to jump thru to do anything, not to mention the annoying inability to have a pre-set temperature button(s). The Bambu Handy app solves…

Pobrania
374
Polubienia
94
Ocena
5
P
PrintablesAly

Bambu Labs smooth PEI GR

I remixed the hard work of https://www.printables.com/model/330476-bambu-lab-bed-sheet-qr-codes-xile6 and made a easy printable version Added a second file with teh text and QR code not so raised up

Pobrania
373
Polubienia
35
Ocena
0
P
PrintablesBrent

Bambu Labs P1P Screen Trim

I liked the look of a lot of the other face plates but found them all to balky.

Pobrania
370
Polubienia
86
Ocena
4,85
P
PrintablesRoyal T

Cable Channel Covers for Bambu Labs P1S 2023

Panels to cover the cable channels running along the top left and right edges of the Bambu Labs P1S 2023 models. The other cable covers I found seem to be made for an older version of the P1S or P1P as they did not fit my machine…

Pobrania
368
Polubienia
93
Ocena
4,67
P
PrintablesWagZ

Bambu Labs P1P/X1 Side Mount spool holder

SO this model of mine came from the linked original. I decided remove the ridges along the bottom so it would sit flat and be easier for everyone to print. I then also cut the model apart and made it turn 90 degrees so a 1kg spool can…

Pobrania
367
Polubienia
60
Ocena
5
P
PrintablesCarpeYeti42

Bambu Labs P1P P1S phone mount

I wanted a simple phone mount to use my old Nexus 5 as a display on my P1P. It's a quick print with no supports needed, and it snaps in the oval hole on top of the printer's faceplate. You can either use M3x4.0x5.0 brass inserts in the…

Pobrania
366
Polubienia
85
Ocena
5
P
PrintablesNate F

Bambu Labs X1 / X1C exhaust fan duct

Bambu X1 / X1C chamber/exhaust duct to use with 100mm ducting. I mounted this with 3M double-sided tape and ran the ducting out the window - no smells when printing with ASB etc. and the chamber fan on.

Pobrania
363
Polubienia
64
Ocena
5
P
PrintablesCraigIn3D

Bambu Labs AMS 2-tier stand V3, V5, V6, Vx

TLDR - This is a universal version of upper and lower brackets which work with all recent AMS 1 / 2 Pro. For 3 or 4 AMS units, see this model . My AMS which was received in an X1 combo did not match any of the versions from…

Pobrania
363
Polubienia
46
Ocena
5
P
PrintablesMaryo Tech

Bambu Labs Spool Insert (Designed for Inland Spooless Filament)

This was created to fit on the Bambu Labs spools that came with my P1P and AMS. I normally by Inland filament from Microcenter. I wanted to try and use their spooless filament as it is $2 cheaper per roll of PLA+. The fit of these rolls…

Pobrania
356
Polubienia
32
Ocena
5
P
PrintablesCarat72

Bambu Labs Silicon Nozzle Scrubber holder for Voron Trident Fixed Nozzle Scrubber

Heatset 2 Voron heatset inserts after printing and attach the same as the original brush attachment. The silicon scrubbers come with adhesive backing, so that is used to adhere the scrubber to the holder. Printed in ABS with standard…

Pobrania
354
Polubienia
51
Ocena
5
P
PrintablesKagman

Bambu Labs QR Code Plate Attachment

IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/17829 Thanks for your…

Pobrania
348
Polubienia
48
Ocena
5
P
PrintablesButcher9_9

Bambu Labs P1S / P1P iPhone Holder

A Remix of SkyGuys great iPhone stand for the P1P. This version has a few differences: Easier to print. Internal cable management. Does not block the top from having a panel installed. Supports P1S. Supports the same phones. Support is…

Pobrania
344
Polubienia
76
Ocena
5
P
PrintablesTestoMane

Escape From Tarkov - LABS LED Wall Sign

I created a LABS Sign because I was not able to find one, which fits my wishes. During my tarkov hype phase I wanted to have something, what decorates my gaming setup. (do not keep an eye on the line which the A throws → A was not clipped…

Pobrania
343
Polubienia
77
Ocena
5
P
PrintablesStebe

Bambu Labs P1P - PTFE Passthrough Larger Hole Remix

This piece reroutes your bowden tube so that you can use a top panel/enclosure. By default the bowden tube runs over top of the frame of the printer. This piece will allow it to run inside without the risk of damaging the bowden tube.…

Pobrania
342
Polubienia
25
Ocena
5
P
PrintablesVACInc

Small spool adapter ring for Bambu Labs AMS

Convert any small spool to 200mm diameter. This goes from 154mm to 200mm. Great for AMOLEN 250g clear spools. Thanks bkilian for your original creation! Original creation with additional size adaptors can be found here:…

Pobrania
340
Polubienia
31
Ocena
5
P
PrintablesJacob_Turetsky

Sorbothane Mounting Foot - Bambu Labs X1C

The sound damping feet can be found here on the US Amazon: 1.25" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive (4, 50 Duro) https://a.co/d/fzzKBZe Make sure to read the weight class suggestions from the manufacturer,…

Pobrania
336
Polubienia
101
Ocena
4,67
P
Printablesrobertgriffiths

Bambulabs AMS attached lightbar

Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…

Pobrania
330
Polubienia
108
Ocena
4,5
P
Printablesio1

IR Turret Crunchlabs, io1 ver. V2.0

DIY IR Turret V2.0 - Inspired by CrunchLabs' HackPack This is the SECOND version of my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits…

Pobrania
322
Polubienia
24
Ocena
5
P
PrintablesGertsen

Remix of Bambu Labs X1 POOPY SHOE - added magnets (10*5 mm)

Added holes for magnets, so it's easier to snap it in place in the blind, if the printer is placed up against a wall. Also, I cut of a tiny bit of the curved edge where the heel meets the slope, to make it print nicer without supports…

Pobrania
322
Polubienia
31
Ocena
5
P
Printables1CM69

Bambulabs A1 & A1 mini hotend holder

A very basic model that I designed in Inventor (.ipt included), to store the hotends for the A1 & A1 mini printers. The holder makes use of the magnets on the back of the hotends (be aware though my 0.6 & 0.8 hotends had the magnets…

Pobrania
320
Polubienia
69
Ocena
5
P
Printables1994df

labs red key card

red key card from tarkov reccommend a 0.2 nozzle but will work with a 0.4.

Pobrania
319
Polubienia
24
Ocena
5
P
PrintablesMallocArray

CrunchLabs Disc Launcher Alternative Discs

CrunchLabs is a subscription box engineering kit designed by Mark Rober. CrunchLabs Box 1 is a disc launcher using a flywheel to throw small plastic discs. This project has variations on designs to get different results. Try them out and…

Pobrania
311
Polubienia
16
Ocena
5