Wyniki wyszukiwania: leads

Sortowanie

164 modeli

P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Pobrania
73 229
Polubienia
11 286
Ocena
4,85
P
Printablesrinkel

Core One front leadscrew alignment helper

I designed a little leadscrew alignement tool, since I found it difficult to align these with the top when the bed is in lowest position. This one is for the 2 front leadscrews. Move the bed to lowest position , unscrew the trapezoidal…

Pobrania
2484
Polubienia
625
Ocena
4,94
P
PrintablesNicholas Kenyon

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…

Pobrania
1753
Polubienia
222
Ocena
5
P
PrintablesTiffi226

Core One back leadscrew alignment tool / helper

I created an easy alignement tool for the back leadscrew of the Prusa Core One. After I finished my build of the Core One I tweaked the front leadscrews using the little helper from user @rinkel.…

Pobrania
1730
Polubienia
360
Ocena
4,97
P
PrintablesSpamBouncer

3018 DIY CNC: T8 Leadscrew / Anti Backlash / Spring-loaded nut Bearing Block for Y Axis

In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…

Pobrania
1043
Polubienia
87
Ocena
4,67
P
PrintablesJevermeister

Voron V0.2 Z endstop combined with a lower guard to protect the area around the leadscrew

This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…

Pobrania
691
Polubienia
125
Ocena
4,89
P
PrintablesInfillTech

Ender 3/Ender 3 Pro Filament guide & Z-Axis Leadscrew guard.

For Ender 3/Ender 3 Pro: Leadscrew guard with integrated filament guide. No need to screw it down, simply slide it over the Z-Axis leadscrew and let it rest there. Note: you may need to deburr the border of the base plate to properly fit…

Pobrania
599
Polubienia
79
Ocena
5
P
Printableslanggore

pastamatic leadscrew with added bearing

had issues with the leadscrew binding so i added a place to add an extra bearing

Pobrania
577
Polubienia
41
Ocena
4,43
P
PrintablesPlatzhalter

Flexible Pen with a simple design - works with 2,8mm Pica leads

This pen uses its own stiffness to grab on a 2,8mm lead (also used by Pica pencils see here: https://www.pica-marker.com/en/pen/pica-dry ) The lead is simply inserted from the tip wile pressing on the walls adjacent to the cutout on the…

Pobrania
564
Polubienia
246
Ocena
4,2
P
PrintablesFredslund

Thread Leads - Learning Toy

The models can be printed in any material you wish! I printed them in 60% scale as i didnt need them to be that big, but feel free to print any size you wish! The premade G-Code is at 60% scale. The model is a tool to learn the difference…

Pobrania
525
Polubienia
71
Ocena
4,86
P
PrintablesBrauer

Ender 3 Z-axis Leadscrew Support Guide

I printed this lead screw stabilizer but it did not work correctly for me. The guide pushed the lead screw out a bit too far and the inner race had no clearance for the bearing to spin. I have also raised up the back face to prevent the…

Pobrania
487
Polubienia
52
Ocena
4,6
P
Printablesetotheipi

Printable Anti-Backlash fixture for dual TR8 leadscrew nuts

EDIT: Added a hexagonal version which should be easier to grip to tighten. I was using a standard TR8 nut and leadscrew in my CNC machine and found it to have tremendous backlash. The typical solution is to use an anti-backlash nut which…

Pobrania
451
Polubienia
44
Ocena
0
P
Printablesvikingbrent

Leadscrew pin retainer for Pastamatic

I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…

Pobrania
430
Polubienia
36
Ocena
5
P
Printablessixfiveohtwo

Rod Loris - Tr8x4 (2 start) leadscrew cleaner

The Rod Sloth by NeedItMakeIt is very cool, but my printer, the Anycubic Kobra, has a Tr8x4 leadscrew (i.e., 8mm diam, 2mm pitch, 2-start, 4mm lead.) This is a completely remodeled version of the Rod Sloth that fits this type of screw.…

Pobrania
418
Polubienia
51
Ocena
5
P
Printablespingu

Pastamatic Leadscrews for 60mm and 80 mm Spools (e.g. Filament PM, Prusament, Prusa, Redline Filament)

60 mm (tested): Prusament spools (perfect winding) e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section) 80mm Spools…

Pobrania
381
Polubienia
35
Ocena
5
P
PrintablesMaxstupo

TR8 Leadscrew Decoupler

This is a Z-axis leadscrew decoupler designed for a TR8 leadscrew. It decouples the XY plane from the leadscrew. The design is similar to an Oldham decoupler, but uses a dovetail to keep the parts together. It's compatible with the Rat…

Pobrania
354
Polubienia
43
Ocena
5
P
PrintablesSpamBouncer

3018 DIY CNC: T8 Leadscrew / Anti Backlash / Spring-loaded nut Spindle Head

In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…

Pobrania
305
Polubienia
18
Ocena
0
P
PrintablesJan B

Pastamatic Leadscrew and winder spindle for 50mm wide Sunlu spools

This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.

Pobrania
297
Polubienia
31
Ocena
4,25
P
PrintablesBugo

Voron Trident Inverted Electronics Z Motor Mounts (motors w/ couplers and leadscrews)

I've remixed the Inverted Electronics & Voron Trident Lowered Z motor mounts so I can install Nema17 motor with coupler and 350 mm leadscrew as I didn't found any with an integrated leadscrew at this length for my self-sourced 300 cube…

Pobrania
287
Polubienia
54
Ocena
5
P
PrintablesTurtleCreations

Leadscrew 45 mm for Pastamatic

Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.

Pobrania
284
Polubienia
34
Ocena
5
P
PrintablesAndrea F.

Mechanical Pencil (Leads 2 mm)

This mechanical pencil is made up of two parts, both must be printed vertically and the use of brim is recommended. There are 2 files to print: "internal.stl" which contains the lead and one of the 7 external parts available (in the…

Pobrania
206
Polubienia
33
Ocena
0
P
Printablesbriguy

Ender 5 Upper Leadscrew Bracket for 608 (Skateboard) Bearing

Updated design to fit a standard skateboard bearing (608). I figure this size of bearing is common enough that most people might have one setting around. Print Settings Supports: Yes Resolution: 0.24 Infill: 20% Category: 3D Printer Parts

Pobrania
188
Polubienia
20
Ocena
5
P

TWO TREES BLUER - LEADSCREW STABILIZER AXIS Z BEARING 608

stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA

Pobrania
178
Polubienia
17
Ocena
5
P
PrintablesVince_Prints

Telebox--Heart Telemetry Simulation Tool [with Clipping Leads]

This is a decoy heart telemetry tool for nursing and pre-med students. The parts are broken into different pieces so that different colors can be used to make the decoy more realistic. Lightly sand any area that will be glued together…

Pobrania
172
Polubienia
15
Ocena
0
P
PrintablesRav Meimad

Fluke 101 holder with place for leads

The model by @nicklargent was good. but i wanted a place for the leads. So I added them.

Pobrania
166
Polubienia
16
Ocena
5
P
Printablesb3n3d1k7

Prusa MK3 Leadscrew Nut Adapter

This is an adapter to be able to use a standard leadscrew nut with the Prusa MK3 stock or bear X axis. You will need 2 ~15mm long M3 screws (or the original screws) to attach the adapter to the x-axis parts. Additionally, 2 8mm long M3…

Pobrania
160
Polubienia
22
Ocena
4,67
P
PrintablesMazaaFIN

Smooth X-axis for Prusa i3 with Leadscrews

NOTE: X-MOTOR.STL and X-IDLER.STL are made for 22mm spacing UPDATE 15.5.2016 moved X-stepper mount point 5mm to left for 21mm version (X-MOTOR_21mm_WIDER.STL) UPDATE 14.2.2016 made parts with 21mm spacing for Geeetech i3 pro c UPDATE…

Pobrania
156
Polubienia
6
Ocena
0
P
Printablesbuck2825

Multi-Meter Tweezers For Fluke TP175 test leads

Created to fit Fluke TP175 test leads, 11mm diameter

Pobrania
154
Polubienia
12
Ocena
0
P
PrintablesPavlo Kotula

48mm Pastamatic Leadscrew

This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…

Pobrania
153
Polubienia
16
Ocena
5
P
PrintablesHarris

Core One sloped leadscrew covers / debris shield

Glaxy Black PETG used with 0.1mm layers - the parts are so small the print takes no time and they are very visible so good to have a nice finish. They are a nice press-fit.

Pobrania
143
Polubienia
25
Ocena
5
P
PrintablesBasementLAB

Fairleads Rope Glide Collection - Passafune vari

Fairleads Rope Glide Collection - Passafune vari Compact Lightweight and low friction Simple and reliable design easy to print Low maintenance Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks

Pobrania
142
Polubienia
23
Ocena
5
P
PrintablesRon McDavid

Pastamatic adjustable leadscrew pin

I was not happy with the amount of backlash in the leadscrew block on my respooler. So I modified the stock block by adding a threaded hole. You will need a M6 setscrew around 10 - 20mm long. You will also need to drill a hole in the…

Pobrania
132
Polubienia
9
Ocena
5
P
Printablesdjos_1475

Anycubic Mega Zero 2nd Z Leadscrew Mount

This is a Remix - the various versions are: v8 = 2 Point Mount (The simple option) v14 = 3 Point Mount (now with a bigger cut-out for the 3rd wheel bolt) v18 = 3 Point Mount with extra Z height clearance for Z-Screw Anti-backlash nuts &…

Pobrania
130
Polubienia
37
Ocena
5
P
PrintablesClough42

Lathe Electronic Leadscrew

I am developing an electronic leadscrew for my lathe, which is a device that replaces the change gears with an electronic controller and a motor. This project is a repository of the brackets, pulleys, control panel parts and reference…

Pobrania
129
Polubienia
24
Ocena
0
P
Printablesxorvious

Creality K1 Leadscrew Z Adjuster

First model! I noticed that my K1 had vertical play in the rear Z leadscrew, appx 1 mm. It didn't seem to effect my prints much, but there is for sure the possibility of movement during a print. I had no luck adjusting it via the grub…

Pobrania
127
Polubienia
39
Ocena
0
P
PrintablesVanessaE

X/Y/Z upgrade kit for acrylic Prusa i3 clones (based on TR8 leadscrews) - No more zip ties!

This is a remix of Whitehawk2000's X/Z ends for leadscrews on the Prusa i3, plus a new X carriage made from scratch, and a new Y carriage remixed from molak34's well-tested design, all designed to mount their bearings with proper clamps…

Pobrania
124
Polubienia
8
Ocena
0
P
PrintablesMadestCat

Test Leads Wall Mount / Messspitzen Wandhalterung

This is just a simple wall mount for test leads. Mounted with three screws or double sided tape. As usual, this was printed in PETG.

Pobrania
115
Polubienia
14
Ocena
5
P

Universal Multimeter Tweezers for Test Leads

These "tweezers" hold multimeter test leads to make one-handed measurements easier. One-handed measurements are more convenient (so you can hold the meter with your other hand) and generally safer because there's no current path through…

Pobrania
109
Polubienia
11
Ocena
5
P
PrintablesTakuya

Voron V2 Leadscrew Z Conversion

WIP: It works, but try at your own risk This is a Voron V2.4 Leadscrew conversion. it uses well leadscrews on Z instead of belts. Includes all files needed. Includes Y endstop mount in A Drive for Umbilical conversion Requires cutting of…

Pobrania
107
Polubienia
27
Ocena
5
P
PrintablesVedarinis

WobbleX for TR8 leadscrew anti Z wobble whole assembly unit with additional magnets

It's a compilation someone's else designs, modified to be used instead of TR8 leadscrew nut (utilizing the same nut as well). I have added additional 6x3mm magnets (I strongly suggest using the best possible grade neodymium magnets,…

Pobrania
106
Polubienia
16
Ocena
0
P
Printablesthr333ddd

Anycubic i3 mega - Yet another Z axis anti wobble stablizer bearing leadscrew

12.4.21 I've added a test print showing the layer surface, so it doesn't look like any Z banding is occurring. I also look at the factory endstop switch and there's no clearance for the bottom mount for it. The Z endstop switch will have…

Pobrania
106
Polubienia
7
Ocena
0
P
Printablespaw3D

Core One Dust Proof Leadscrew Covers (Remix)

The cover press-fits firmly into place and slopes away from the leadscrew guiding any debris away from it. To form a dust-proof seal against the leadscrew some foam is glued to the cylindrical surface of the cover's center hole. CA glue…

Pobrania
105
Polubienia
36
Ocena
5
P
PrintablesAlan Canfield

Anycubic Vyper Leadscrew Stabilizer

Bought a used Vyper with a broken leadscrew support so i decided to replace it using the intact one as a reference. Its pretty minimalist so it does have the snap on cover like the original but little collar that goes around the top of…

Pobrania
102
Polubienia
20
Ocena
5
P
PrintablesRESTLESS DESIGN

Leadscrew Protector

This quick and easy to print part can be mounted on the right side z-axis stepper motor to protect the leadscrew. The fan that cools the filament once is its layed down, can blow small pieces of filament to the right side leadscrew and…

Pobrania
97
Polubienia
10
Ocena
4
P
PrintablesKeno0355

LeadScrew Brace Retrofit-Remix

There are several versions of the rewinder. Where the original bracket does not fit, the corresponding support is missing. I adjusted the thickness so that the holder now also fits this rewinder with the support (above the "m" from…

Pobrania
94
Polubienia
8
Ocena
0
P
PrintablesPlayer Xy

mechanical pen leads box/container/storage/case│Back to school│0.5 0.7 and custom│name tag in Prusa slicer

🖊 Sleek and Functional Lead Container Tube This 3D printable model is perfect for organizing your 0.5mm and 0.7mm mechanical pencil leads. Designed with students and professionals in mind, it offers: 🔹 Dual Compartments: Keep your…

Pobrania
92
Polubienia
7
Ocena
0
P
PrintablesRafa

Ender 3 Dual leadscrew Mechanical Gantry Alignment Endstop

Just print 2 of those and snap on the top of the printer. Now you can bump the gantry on them to mechanically align your gantry. You will also need 1 T-Nut and equivalent screw. Ideal for Enders with 2 leadscrew but just 1 stepper driver…

Pobrania
90
Polubienia
12
Ocena
5
P
PrintablesLaurWatt

Electronic test leads rack

This is a support for test leads used in electronic; Multimeter leads, oscilloscope probes etc. It is intended to be screwed on a shelf plate. Just hanged the leads, I hope they will straighten if given some time to rest... Print Settings…

Pobrania
87
Polubienia
16
Ocena
5
P
Printableswitem

2040 T8 Leadscrew / Anti Backlash nut holder

Holder for T8 anti-backlash leadscrew nut with holes for 2040 profile

Pobrania
83
Polubienia
9
Ocena
0
P
PrintablesCryolupus

Tr8x2 Leadscrew Cleaner; 8mm OD 2mm Pitch 1 start

A cleaning tool for Tr8x2, 8mm diameter 2mm pitch 1 start leadscrews. Note that these are not the same as the ones usually on 3D Printers, which are 2mm pitch 4 start. Printed mine out of PLA, 2walls, 15% gyroid infill, 0.2mm layer…

Pobrania
82
Polubienia
25
Ocena
5
P
PrintablesFuganater

Voron Legacy Leadscrew block for POM nut

Made so you can use a POM leadscrew nut on the VORON Legacy Z leadscrews.

Pobrania
82
Polubienia
18
Ocena
0
P
PrintablesClockworkIdiot

E3NG 1.2 - Flexi Inserts for Stock Leadscrew Nuts

Reuse your stock two-screw leadscrew nuts with the Ender NG. Features an additional bump to stop the nut flange binding on the spring part of the flexi

Pobrania
78
Polubienia
23
Ocena
5
P
PrintablesYell

Trident R1 motor spacer / standoffs for leadscrew coupler V2

This one here is or Trident R1 only R2 is here This is a V2 of my first version which still runs fine in my trident but adds a couple of QoL improvements smaller Z height so there is room to route cables below, also fits nicer with the…

Pobrania
77
Polubienia
19
Ocena
5
P
PrintablesRabid Badger

Leadscrew Vise

A useful project vise, capable of holding work securely with minimal flex. The jaws are 75mm wide, 30mm tall, and max opening is 100mm. Requires the following hardware: 1x 8mm, 2 start, 4mm pitch lead screw & matching brass nut 12x…

Pobrania
76
Polubienia
15
Ocena
0
P
PrintablesRobert Graf

Pastamatic Leadscrew for 70mm, 100mm & 115mm Spools

My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of…

Pobrania
69
Polubienia
7
Ocena
5
P
PrintablesMijoni

Ender 3 Z-Stepper motor bracket. Works with dual leadscrew

A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 50-100 Filament:…

Pobrania
69
Polubienia
12
Ocena
0
P
Printableschriswal

ANet A8 Printed Leadscrew

This is a Test for a 3D Printed Leadscrew This is a square thread. It is a flat screw you have to print it flat and diagonal on the surface you need http://dkprojects.net/openscad-threads/ to compile the scad files i used candle wax for…

Pobrania
69
Polubienia
5
Ocena
0
P
Printablesmat_neu27

Testing leads holder

I made these little spools to get rid of the measurement leads where are always hanging over the bench when not in use. The design was inspired by the garden hose holders. Mounting: You can fix them directly on a surface or with the…

Pobrania
68
Polubienia
16
Ocena
0
P
PrintablesRoostaff

pencil for graphite leads 2mm

a simple pencil to hold 2mm graphite leads with holder for snug fit!

Pobrania
67
Polubienia
11
Ocena
5
P

Leadscrew Nut Support Block

Pillow Block for a 8mm leadscrew nut with two variations Category: 3D Printer Parts

Pobrania
67
Polubienia
7
Ocena
0
P
PrintablesNahuel

Hot Shoe Cover (shorter leads)

Some cameras have stops on the side which don't allow the cover to slide all the way.

Pobrania
65
Polubienia
5
Ocena
4
P
PrintablesMFBS Design

Gold Series Leadscrew guides for use with VenterMechs on Rat Rig V-Core 3

Please note my newer style ones for mounting in V-Core 3.1 stylised holders can be found here: https://www.printables.com/model/1552963-wiggle-woggles-for-lead-screw-guides-for-all-rat-r Leadscrew guides compliment VenterMechs, Wobb e…

Pobrania
58
Polubienia
12
Ocena
0
P
PrintablesTritschi

Update of LeadScrewBlock of Pastamatic - Filament Spool Winder for Bambu Lab and Others

As add-on of my earlier posted a motorized winder which was a remake / remodel of @GekoPrime's spooler I now add a revised LeadScrewBlock. All of these files are also in my original post:…

Pobrania
56
Polubienia
12
Ocena
0
P
PrintablesCaretaker

Tracer Deep Hole Pencil, Pen and Leads Wall Mount

Small print for holding the deep hole pencil by Tracer. Prints in PLA or resin. Orientate upsidedown for PLA with no supports. Update 06/05/25 - 3x Holder Added Update 14/05/25 - Marker Pen holder added and Leads Case holder added.

Pobrania
55
Polubienia
4
Ocena
0
P
PrintablesIgnacio Gabriel

Powder Detergent Dispenser with TR48x12 Leadscrew and Dual 6000 Bearings

Imagine never spilling powdered detergent again or guessing how much you're using. This compact and durable 3D-printed dispenser gives you full control and consistency with every load of laundry. This system is built around a TR48x12 ISO…

Pobrania
55
Polubienia
19
Ocena
0
P
Printableseried

Prusa i3 Leadscrew Z axis upgrade

Upgrade for the Hictop clone of the Prusa i3 Print instructions I am building a HICTOP prusa i3 printer but the z axis wobble a lot, so I decided to get the threaded screws straight https://www.youtube.com/watch?v=dy64oB7fG-k but this was…

Pobrania
55
Polubienia
2
Ocena
0
P
Printablesross549

Fluke 101 Multimeter and test leads holder for Pegboard

Many thanks to Thingiverse user woodwerk for the original design. I needed an easy way to hang up my Fluke 101 multimeter on my pegboard. I didnt need the holder for the Klein tester, so off to TinkerCAD we go! Here is a link to the model…

Pobrania
55
Polubienia
7
Ocena
0
P
PrintablesJesco

HyperCube Evolution Leadscrew Guide

Leadscrew Guide for the HyperCube Evolution. It fixes the TR8 leadscrew in place with a 608 bearing at the top to improve z layer consistency. This version has a screw-on plate to really fix the bearing in place. I run a non-enclosed…

Pobrania
53
Polubienia
5
Ocena
0
P
PrintablesMacNite

Redesigned parts for Vulcanus V1 - Leadscrew and Belt Tensioner

I wasn't quiet satisfied with using M8 screws for the z-axis, so I altered the mount to accept an TR8 leadscrew. I also changed the design of the belt tensioner mounted to the x carriage. Print instructions Category: 3D Printer Extruders…

Pobrania
51
Polubienia
4
Ocena
0
P
PrintablesClaasWorks

Test Leads Hook Holder

Test Leads Hook holder / 4 slot wall bracket

Pobrania
51
Polubienia
19
Ocena
0
P
PrintablesClaasWorks

Test Leads Hook Holder - cable organizer - new version twin

Link youtube https://youtube.com/shorts/JC1TbkeIB4g?feature=share

Pobrania
51
Polubienia
5
Ocena
5
P
PrintablesSomePrints

Ender 7 Triple Leadscrew Mod

This is my attempt at a z-axis triple screw mod for the ender 7, when used with my other mod (will be uploaded soon) to convert the rear mount to linear rails it should lose little to no height in the z-axis. You will have to rotate some…

Pobrania
49
Polubienia
15
Ocena
0
P
PrintablesClaasWorks

4 Test Leads Hook Holder - cable organizer - new version

Link youtube https://youtube.com/shorts/JC1TbkeIB4g?feature=share

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesLMaker

Leadscrew support

Material´s list 1 unit -- Bearing 688 2RS 2 units -- T-Nuts 20-M3 2 units -- Screw DIN912 M3x20 2 units -- Screw DIN 7991 M3x10

Pobrania
45
Polubienia
16
Ocena
0
P
PrintablesJimjo

Mini Lathe LeadScrew Hand Wheel

WARNING! In order to use this modification the gear guard must be removed! in addition your hand will be close to the gears and spindle! Use at your own risk This handwheel replaces the last gear in the change gear set to enable manual…

Pobrania
44
Polubienia
9
Ocena
0
P
PrintablesDuane

Leadscrew Greaser - No Mess

Print with supports and clean up the hinge pin faces, Use a piece of filament for the pin heat and mushroom the end over over with something. There are versions for pipe sizes 2.2 - 3.0mm but you w8ll need to clean up the hole with a dril…

Pobrania
42
Polubienia
13
Ocena
0
P
PrintablesNickolas

5mm axis to M8 leadscrew coupler

This is custom coupler for M8 threaded rod, the rod should be screwed into the coupler so it shall have a perfect fit.

Pobrania
41
Polubienia
7
Ocena
0
P
PrintablesBinary

Leadscrew Guard STL format

Design is still fully @DustinFickert_397996 but creator has gone completely awol and only has a buggy 3MF file uploaded.

Pobrania
40
Polubienia
7
Ocena
0
P
PrintablesK2_Kevin

Z-axis LeadScrew Cleaning Tool

Using the Easy Lead Screw Cleaner Stuff/lay small amount (two layers) paper towel or sponge in the cavity. Add IPA and clip it to the lead screw. Move the z-axis up and down. NOTE : I would suggest printing two or three and doing all rods…

Pobrania
40
Polubienia
6
Ocena
5
P
PrintablesYuri

Multimeter leads wall mount

Wall mount for multi meter probes

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesDmytro Sichkar

Pastamatic Leadscrews for 120 mm Spools

This is a remixed model designed for 3kg spools with a width of 120mm. Useful for Creality Space Pi Dryer Plus.

Pobrania
38
Polubienia
0
Ocena
5
P
PrintablesAdam L

Klicky/unklicky dock for VCORE-3 integrated into MFBS's Gold Series Leadscrew guides

This is a mixup of 3DP and Me's upcoming Klicky dock for EVA3/VCORE-3 with MFBS's Gold Series Leadscrew guides. Remix of https://www.thingiverse.com/thing:5063532 and an unreleased dock for the VCORE3 (will update this when released). I…

Pobrania
38
Polubienia
8
Ocena
0
P
PrintablesChip

Prusa 22mm to 25mm Leadscrew nut drill template

The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead. This template is use to drill 2 extra holes on standard 22mm nut so you can mount it on the stock(or bear) X axis. Use 3.2mm drill bit is…

Pobrania
37
Polubienia
5
Ocena
0
P
Printablesbbandi

Prusa i3 mk2 x-ends for 22mm leadscrew nut

I've modified the prusa i3 mk2 x-end parts to fit the 22mm brass leadscrew nut, easily available from aliexpress, even integrated to steppers. These are similar designs: https://www.thingiverse.com/thing:1920972…

Pobrania
37
Polubienia
1
Ocena
0
P
PrintablesJustin B

Z Axis Leadscrew Knob

This is a completely redesigned z-axis leadscrew knob for the discontinued Type A Machines Series 1 3D Printer. It has the Type A Machines logo on the top, solid hub to hug the lead screw, and a more aggressive design for grip as well as…

Pobrania
37
Polubienia
3
Ocena
5
P
PrintablesCargy

Multimeter Storage Case with Storage For Two Test Leads

This is pretty straightforward, and more or less speaks for itself. A few days back, I saw a multimeter case by swhitl13 (thing 3209712), and I liked the idea very much, as my trusty meter had rattled around "temporarily" in an old ice…

Pobrania
37
Polubienia
6
Ocena
0
P
Printablesthomasmitschke

Leadscrew Adapter for Prusa i3 Mk2 X-Ends

This is a adapter for x-end-idler.stl and x-end-motor.stl from Prusa's Github page to fit a normal leadscrew into the holes. I've also included the Fusion360 file for modding it by yourself. Category: 3D Printers

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesGongdihakseng

MZ3D's Bottle cutter (leadscrew version)

Original model by and many thanks to @MZ3D. Bottle cutter with scalpel knife blade, remixed to fit common leadscrews. I also added KRW for my friends out there, along with some other coin varieties.

Pobrania
34
Polubienia
6
Ocena
0
P
PrintablesYoshi2oo8

Rook [Legacy] MK1 Clamped Bed with Leadscrew

Remix of Kanrogs Clamped MK1 Bedframe to Upgrade a Legacy frame with a single Leadscrew on either side

Pobrania
34
Polubienia
2
Ocena
0
P
Printablessaketh Grandhi

flexible pen for 2mm leads

works with 2mm leads

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesPsych0h3ad
Pobrania
33
Polubienia
14
Ocena
0
P
PrintablesCatGunStudio

Ender 3 v2 leadscrew guard PTFE

Remix Source Files search is currently broken. Mixed from: https://www.thingiverse.com/thing:4318767 https://www.thingiverse.com/thing:3303562 I liked elements of both of these. I did not like not screwing down the guide as done in…

Pobrania
33
Polubienia
8
Ocena
0
P
Printables1CM69

Anycubic Mega Zero 2nd Z Leadscrew Mount

This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to a dual Z axis configuration. I have also included the stepper bracket as mine was modelled using a thinner than the…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesDuckferd

Creality T8 Leadscrew Nut Adapter

If you have a mix of Creality and other printers, you might end up needing different type of T8 leadscrew nuts to cover them all. This is a very simple adapter that adapts a Creality style 2-screw trapezoidal nut into the commonly found…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesDanAndersen

Sunlu S8 Shims to use Ender 3/CR10 Z-Axis Leadscrew Top Mounts

To make a nice top mount for the Sunlu S8 Z-Axis Leadscrews, you can use the typical Creality Ender3/CR10 Solid mounts, when you add a little spacer. Print this one twice and you are good to go. Mine are:…

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesChip

22mm to 25mm Leadscrew nut adapter

This version is outdated, use this drill template : https://www.prusaprinters.org/prints/115469-prusa-22mm-to-25mm-leadscrew-nut-drill-template The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead.…

Pobrania
28
Polubienia
7
Ocena
5
P
PrintablesScott Gibb

Cable Leads Hanger

3D Printed Cable Leads Holder Panel with small hooks, ideal for hanging up different apparatus such as Oscilloscope probes, Power Supply cables and USB cables. Perfect hanger for your electronic needs! Print Settings Printer Brand: Prusa…

Pobrania
28
Polubienia
7
Ocena
0
P

Ender 3 Part/piece/leadscrew

remade from original part. not fitted yet but looks like it will fit

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesSplashdown

Ikea Desk Insert to hold power leads

I created an insert for an Ikea desk. I is designed to hold power leads of various thicknesses so you dont have to go digging under the table each time you want to use one. The idea is that the cables are fed through the table and then…

Pobrania
28
Polubienia
4
Ocena
0
P
PrintablesMFBS Design

Sturdy leadscrew alignment tools for V-Core 3

These are sturdy leadscrew alignment tools for the Rat Rig V-Core 3 printers. The rear guide is only for use with the earlier V-Core 3 printer with the offset lead screw. These are not required for lining up the leadscrews on V-Core 3 or…

Pobrania
27
Polubienia
4
Ocena
0