Wyniki wyszukiwania: lenses

Sortowanie

194 modeli

P
PrintablesNominal Brand

Rear lens cap for Canon EOS EF and EF-S lenses

Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…

Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu

Pobrania
2466
Polubienia
495
Ocena
5
P
Printablessh

🕶 Party fun glasses "smart-ass" with interchangable lenses (choose your own pattern)

Info: another model of glasses with interchangeable lens with different patterns the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
621
Polubienia
72
Ocena
4,5
P
Printablessh

👓 Glasses - customizable texts - interchangeable see-through lenses - with your infill patterns

Info: glasses with customizable texts & customizable see-through lens patterns lenses are: interchangable you can print your own pattern using different infill pattern and percentage (see 3mf samples) customizable texts: i prepared 3mf…

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
232
Polubienia
47
Ocena
5
P
PrintablesCypherA7

Spider-Man PS4 Faceshell + Interchangeable Lenses by HappyMoon on Thingiverse

I've seen this Spiderman PS4 faceshell on thingiverse and I wasn't sure if HappyMoon had uploaded it to Printables yet or not so I figured I would share it with this community in case anyone hadn't seen it. It looks like an awesome…

Pobrania
2332
Polubienia
294
Ocena
5
P
Printablesdoroteo

MEDIUM FORMAT CAMERA for MAMIYA PRESS LENSES

Hi! This project is a medium format to be used with Mamiya Press lenses. I uploaded a photo taken with this camera. A Fusion 360 file is attached for you to be able to modify it. The information related to this camera can be found in…

Pobrania
2184
Polubienia
777
Ocena
4
P
Printablessh

😎 Party fun "nerd" glasses with interchangable lenses (choose your own pattern)

Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

Pobrania
884
Polubienia
124
Ocena
5
P
Printablesjay16799

Bahtinov Mask for 18-55mm Lenses

Summary of Concept This is a 3D printable Bahtinov Mask to assist with manually focusing on the night sky. Bahtinov masks work by creating diffraction spikes from a point light source (like a star) spread out across different sections of…

Pobrania
756
Polubienia
54
Ocena
5
P
Printablesnilsstreedain

Spider-Man Homemade Goggle Lenses

This file is the white lens/mesh for the Spider-Man homecoming homemade goggles. This file is fit for these goggles ( https://www.thingiverse.com/thing:2401612 ) but should be easily scalable for any size. If you have any…

Pobrania
625
Polubienia
113
Ocena
5
P
Printableskora

Contact lenses case

Remixed original for easier and faster printing with no supports. If you plan to store these in PLA, in my experience, the best is to wash and keep some saline solution for a day before you put the contacts. Print Settings Printer Brand:…

Pobrania
615
Polubienia
48
Ocena
5
P
Printablestwothingies

Long lens hood for CANON EF/EFS - 58 mm ø lenses

A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. The stepped inner surface improves light-blocking performance. Compatibility This…

Pobrania
566
Polubienia
60
Ocena
5
P
PrintablesKagarov

3D printing lenticular lenses

After some experiments, I reached the opportunity to make lenticular lenses on the printer. My experiments have shown the possibility of stereoscopic and variable images. There are many programs for preparing stereo-vario pictures.…

Pobrania
552
Polubienia
86
Ocena
5
P
PrintablesWhitey4405

Glasses Frames For Prescription Lenses

It's just a bit of fun. I have designed and printed a pair of glasses frames to suit my glass's lens shape in clear PETG Prusament. I have attached the part models of the frames and arms in a STEP format if anyone would like to customise…

Pobrania
461
Polubienia
37
Ocena
4,6
P
Printablestwothingies

Short lens hood for CANON EF/EFS - 58 mm ø lenses

A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. Check out our growing collection of 3D printable designs for Photography ! Follow us…

Pobrania
456
Polubienia
36
Ocena
5
P
PrintablesBruno

Oculus Meta Quest 3 prescription lenses magnetic adapter

video link: I wanted to have custom made prescription lenses the same size as quest3 lenses instead of using the typical Zenni ones. Also, having a non round shape guarantees that the angle will be perfectly aligned for astigmatism. The…

Pobrania
406
Polubienia
74
Ocena
5
P
Printablesacornelissen

MRF: a LiDAR-powered, lens-coupled medium format film rangefiner for Mamiya Press Lenses

The (M)edium format (R)ange(F)inder is a 3D-printable camera that uses relatively easy to source, off-the-shelf components. See the Github repo for the most up to date files, including firmware and KiCAD / Gerber files for the custom PCB.…

Pobrania
363
Polubienia
64
Ocena
5
P
PrintablesAksium

M42 to Fujifilm X mount Thin Adapter for Projector Lenses

Mounts m42 lenses or helicoids to Fujifilm mirrorless cameras. Note that this is primarily for adapting projector lenses with a focusing helicoid. So, the flange distance is a lot thinner than normal. A conventional m42 lens will not have…

Pobrania
361
Polubienia
27
Ocena
0
P
PrintablesJacco

Remix: GoBo projector for Bowens mount and m42 lenses. Uses Godox GoBo's.

All credits go to original creator! I used alu tape to get a little bit more light out of the device as advised by original creator. Printed in PETG (gray) except the GoBo holder (PLA, black). Supports only used where the nuts go to…

Pobrania
354
Polubienia
46
Ocena
5

Contact lenses dispenser

Dispenser box for total dailies contact lenses can hold approximately 15 sets of lenses. After printing the parts, add a long elastic band to create tension on the elevator plate.

Pobrania
345
Polubienia
69
Ocena
5
P
Printablesk.makesstuff

Sunglasses for Oakley Jawbone lenses

I made these glasses since I couldn't work up the nerve to buy real Oakley sunglasses so I figured the next best thing was to buy a pair of replacement lenses and then make a 3D printed frame. They work well and they are a great…

Pobrania
329
Polubienia
36
Ocena
0
P
PrintablesUko

Daily Lenses Small Box

I made this small box that fits two pairs of daily contact lenses. I keep it all the time at my daily backpack, so if I forget to put on my contacts (when I rush out of the house in a hurry) I always have a backup. This design may not fit…

Pobrania
294
Polubienia
41
Ocena
5
P
PrintablesSaniainen

Smallrig Grip for Sony a6400 for larger lenses.

[EDIT 13.5.2024] added new model for even larger lenses and fingers. 3d printed Handgrip for Smallrig CCS2310 2310 cage. Tested with Sony a6400, may work with 6100 and 6300, but I haven't tested. Won't fit a6500. This is V2 version of…

Pobrania
279
Polubienia
50
Ocena
5
P
PrintablesTT

Customizable Contact Lenses Dispenser

I designed this contact lens dispenser to fit neatly into my mirrored cabinet. With Fusion 360 you can adjust the following parameters: Total height/depth, dimensions of the blisters of the daily lenses, wall thickness, height of the rear…

Pobrania
263
Polubienia
32
Ocena
5
P
Printableseponra

Transport cases for Micro Four Third Lenses

So, my gf needed a case for her lenses, but we found none (or no cool one), which she could just drop into her backpack when not in use. And so i went and took the lenscap from babr, and the threaded container from Engineering_Aesthetics,…

Pobrania
248
Polubienia
40
Ocena
0
P
Printablesmaxelman

FUJIFILM Lens Hood for XF23mmF2 and XF35mmF2 R WR Lenses

You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…

Pobrania
220
Polubienia
19
Ocena
5
P
PrintablesCodeCowboy

Plague Doctor Mask Elongated + Spiderweb Lenses

This is a simple modification to make the most out of a Creality CR-10 bed. When the model is positioned from corner to corner there is a ~10mm margin to the edge of the build area. Dimensions are 327.7mm Long, 155.48mm Wide, and 240.51mm…

Pobrania
217
Polubienia
36
Ocena
0
P
PrintablesEmpiricus

Tilt-Shift Adapter for Canon EF and FD lenses to EOS-M and Micro Four Third Systems

Here is a Tilt-Shift Adapter that can be configured to attach Canon EF or FD lenses to an EOS-M camera. Old FD lenses will allow to select the f-stop. EF lenses will have wide open aperture and the adapter allows for detailed control of…

Pobrania
210
Polubienia
76
Ocena
0

Lens cap for Canon 50mm f1.8 LTM lenses

Should work for lenses with the same filter size

Pobrania
206
Polubienia
10
Ocena
5
P

Gridfinity for Canon Lenses

Designed to hold the lens with both lens caps and one UV filter. EF 24-70mm 1:2.8 L EF 200mm 1:2.8 L II EF 85mm 1:1.8 USM EF 50mm 1:1.8 STM EF 80-200 1:4.5-5.6 II EF 28-90 1:4-5.6 50mm bin will probably hold other similar lenses too.

Pobrania
195
Polubienia
28
Ocena
0
P
PrintablesJan

Contact lenses travel case

The internal dimensions are 160x36x36mm

Pobrania
180
Polubienia
56
Ocena
5
P
PrintablesBopkes

Sunglasses, Sonnenbrille, DIY (Oakley Holbrook lenses)

Description I designed these sunglasses a few years ago after my sunglasses (Okley Holbrook) broke while mountain biking. The goal was to reuse the lenses and have an affordable frame that could be easily and cheaply replaced if damaged.…

Pobrania
173
Polubienia
14
Ocena
0
P
Printablesmorozgrafix

Mamiya Sekor Rear Lens Cover for 80mm f/2.8, 105mm f/3.5, 135mm f/4.5, 65mm f/3.5 TLR lenses

Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…

Pobrania
167
Polubienia
16
Ocena
5
P
Printablesyukosteel

Voigtlander 35mm F1.4 / 40mm F1.4 / 50mm F1.5II / 28mm F1.5 Nokton Leica M lenses - hood mount protector ring 43mm

Hood mount protector ring for Voigtlander 35mm F1.4 Nokton Leica M mount lens. It should be also compatible with few lenses that also have 43mm filter thread: Voigtlander 28mm F1.5 Nokton Leica M mount (untested) Voigtlander 40mm F1.4…

Pobrania
164
Polubienia
10
Ocena
0
P
Printablesbillyd

HDZero Goggle faceplates with mounting for custom prescription lenses

Update 01-18-23 Wide faceplate added! Update 01-17-23 I rebuilt the model from the ground up and improved it further. Added the step file for those who wish to make changes. Coming soon: Wide Faceplate version! Update 01-16-23 I replaced…

Pobrania
161
Polubienia
14
Ocena
0
P
PrintablesBELzEBUB

Quest 3 Lens Frames for Pico 4 Lenses (VR Optician)

This is an adapter to use existing Pico 4 lenses from VR Optician on a Quest 3 VR headset. After printing I had to carefully cut away some blobs on the outer side part that clicks inside the lens frame of the headset to make it fit. Be…

Pobrania
157
Polubienia
9
Ocena
0
P
Printablesbmsleight

BetaFPV VR03 FPV Goggles Lenses Holder

Plate to hold lenses inside the BetaFPV VR03 FPV goggles as the goggles are smaller than all tested glasses frames. (Needed size is ~110mm) Print two plates - with the bed side of the pieces facing inwards. Needed as the is a chamber on…

Pobrania
152
Polubienia
9
Ocena
5
P
Printablesaplayz

Skadis Tray Holder for Camera Lenses (optimized for Canon RF)

Skadis Tray Holder for Canon RF & EF Lenses A secure Skadis-compatible tray holder designed for Canon RF and EF lenses. (And Others, but not testet) The lens sits snugly in its designated tray, preventing accidental falls. Features: ✅…

Pobrania
135
Polubienia
9
Ocena
5
P
Printablesbunnyology

Half-frame sunglasses for Oakley Garage Rock Lenses

This sunglasses frame is a fast and easy print. It is compatible with Oakley Garage Rock lenses. The lenses are simply clicked into the frame- no glue required. Printing Instructions Print upside down without any supports. I printed with…

Pobrania
124
Polubienia
4
Ocena
0
P
Printableszzzy

Frames for sunglasses using reclaimed lenses from cheap fit-overs

(This is the same as original thing 4965384 but reuploaded because it won't get listed on my designs page.) Print flat as shown in the last image. Original source for temples, hinge, and nosepad design is below, included temples here just…

Pobrania
123
Polubienia
8
Ocena
0
P
Printablessbuerger

M42 and T2 screw caps for cameras/lenses/extension tubes

M42 and T2 extension tubes and adapters usually are sold without protective caps (same for bayonet/thread adapters and the like). This may be ok for initial transportation, but if you have configured a setup to use those items that you…

Pobrania
120
Polubienia
12
Ocena
5
P
PrintablesRice_Bowl

DJI O4 Lite Lens Mod for M8 and M12 Lenses

I wanted to make my own lens mod adaptor print for my Hachidorii XL O4 build and I came up with these. I have options for M8 and M12 lenses - based on my own testing, I like the M12 lens more such as the runcam thumb pro lens (which I use…

Pobrania
114
Polubienia
12
Ocena
0
P
PrintablesRasmussen
Pobrania
109
Polubienia
18
Ocena
5
P
Printablesmherfurt

Easy-On Lens Cap for Sony E-Mount lenses (no need to align the dot)

If you are looking for a lens cap that fits your E-Mount lens without the hassle of aligning the dot when screwing it on, you might want to check out this model. It is a universal lens cap that screws on and off easily, and protects your…

Pobrania
107
Polubienia
6
Ocena
5
P
Printablesi3D Makers

Spider-Man Textured Face Shell & Magnetic Lenses (REMIX)

Create the ultimate Spidey mask with this textured 3D-printed face shell. Features magnetic lenses for easy swapping.

Pobrania
103
Polubienia
17
Ocena
0
P
PrintablesSE

Daily Lenses Small Box in PLA

All in one box is a great idea but the original model required PETG due to flexibility of the hinge. This remix allows printing with arbitrary material because the flexibility is done by a pair of springs. You can adjust sizes and…

Pobrania
103
Polubienia
7
Ocena
5
P
PrintablesRoss

Flash Diffuser for Meike MK320 with small lenses

This diffuser was designed specifically for use with the Meike MK320 flash and very short macro lenses. It snaps in place without any additional shenanigans to keep it in place - remove by pinching the top & bottom where this diffuser…

Pobrania
102
Polubienia
13
Ocena
5
P
Printableswaintdeir

Logitech C270 - Cover for Smartphone Lenses (Wide Angle - Link in Desc.)

When using the C270 in my Kingroon KLP1, I wasn't able to see very much of the build plate because of the C270's small FOV. I grabbed the cheapest “Smartphone Wide Angle Lens”-Kit on Amazon and made it fit onto my C270 using the Remixed…

Pobrania
100
Polubienia
12
Ocena
5
P
PrintablesLucMeister

Grabhole 80mm OD lever QR clamp for anamorphic projection lenses

This clamp is an improved development of my original Grabhole QR adapter . what. With the rise of cheap 80mm OD rings that many people use on their sphericals anyway, I figured it would be smart to design a scope-to-lens connection based…

Pobrania
93
Polubienia
7
Ocena
0
P
Printablestto

Twist Stopper for Sigma 150-600 C (and other lenses)

The problem: Attaching the lens to an Arca Swiss Quick Release Plate with a single screw causes the connection to come loose again when carried or used. I chose a 140mm long Arca Swiss Plate for good balancing on a gimbal. This plate has…

Pobrania
88
Polubienia
9
Ocena
4,67
P
PrintablesMarcus_3D

Contact lenses dispenser

I created this dispenser for my TOPVUE AIR contact lenses Dimensions of each one are 55x30mm I mounted the dispenser with double-sided sticky tape on the side to bathroom tile Download -> Share -> Print -> Rate -> Donate -> Enjoy -> Thank…

Pobrania
85
Polubienia
10
Ocena
0
P
PrintablesXimple Printing

Small tweezers for contact lenses

I was looking for a small contact lens tweezers and I really like the design of the magnet tweezers by Matt Boyer . I prefer a small and long tip so did my own model. Since the idea is not original, I still count this as a remix. Thank…

Pobrania
85
Polubienia
14
Ocena
0
P
PrintablesWeaponsmith

Sony lens holder for e-mount lenses

Plate to store 4 sony e-mount lenses. They're spaced wide enough apart that you can easily fit most lenses. Pictured here is a Tamron 70-300 that is 92 mm wide. You could place 4 of them on this mount without clearance issues. If your…

Pobrania
81
Polubienia
18
Ocena
5
P
PrintablesNofkon

Glasses lenses

3D model of men's stylish men's eyeglass frames.

Pobrania
73
Polubienia
16
Ocena
0
P
PrintablesPeter

RPi Camera V2 with Articulating Arm and exchangeable lenses.

Newly designed articulating arm for Raspberry Pi camera V2 module, inspired on existing designs but fully remixed for the purpose. Fits the original MK2 and MK3S Prusa printers. Arm with 4 degrees of freedom, for perfect positioning and 4…

Pobrania
73
Polubienia
9
Ocena
5
P
PrintablesBliry

Quest 3 adapter for Reloptix Quest 2 lenses

Printed with PLA Magnets can be found here https://a.co/d/0eV5mfH6 The magnets can be pressure fitted or stuck with a drop of super glue Printed with the magnet holes facing down I mirrored the model in the slicer along the x-axis to get…

Pobrania
72
Polubienia
10
Ocena
5
P
PrintablesFabio Zonno

Redmi Note 11 Pro+ 5G Lenses Protector

This is a remix of https://www.thingiverse.com/thing:5360350

Pobrania
70
Polubienia
7
Ocena
5
P

Lenses holder for BetaFPV VR03 FPV Goggles

Use this plate to hold lenses inside the BetaFPV VR03 FPV goggles. Print two plates, screw together with lens inside and place in goggles. Compatible with lenses you can buy on Amazon using following link: KoKoBin 2 pacco Occhiali da…

Pobrania
69
Polubienia
4
Ocena
0
P
Printablesdrhollen

Vixen Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses

Vixen Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses This is a standard Vixen-compatible dovetail bar that attaches to Canon RF 600mm or 800mm F11 IS STM lenses. These lenses don't have a rotatable foot, just a mount built-in…

Pobrania
69
Polubienia
5
Ocena
0
P
PrintablesBuild-0-Matic

Leica M39 LTM focusing adapter for broken Point & Shoot camera lenses.

This is an adapter designed to mount lenses from cheap broken Point & Shoot cameras on rangefinder cameras that use the M39/LTM mount like old Leicas. The design is printed in multiple parts which are correctly oriented for ease of use.…

Pobrania
66
Polubienia
11
Ocena
0
P
PrintablesJohnA

Storage box for microscope lenses

Easy to fit together. Probably best to print in PETg as some flex is needed but not too much. This is a remix of The Same Name Twice's "Rugged Parametric Box" that has seen so many other remixes. This should be able to hold most common…

Pobrania
65
Polubienia
14
Ocena
0

Baby Neopixel Nanoleaf Lenses!!

I use white filament for the bottom, then do a filament change to black at layer 6 or 12 (2mm layer height) depending on how you want it to look. Then just insert them into some Baby Nanoleaf Hexagons.…

Pobrania
62
Polubienia
21
Ocena
0
P
Printablesdrhollen

Solar filter for binoculars (with 42mm objective lenses)

Solar filter for binoculars with 42mm objective lenses. These work both on my Nikon Monarch HG 10x42 and Nikon Monarch 7 10x42 binoculars and will probably fit other similar sized binoculars. This solar filter fits nicely on the end of…

Pobrania
61
Polubienia
6
Ocena
0
P
PrintablesKalleKnall

HP Reverb G2 Face Cover with/without Spectacle lenses Inserts - better FOV / SweetSpot / wider Version - supportless - even easier to print

THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY ! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 of my supportless - easy to print - HP Reverb G2 Face Cover. It's optimized for even easier printing and other improvements. Version 1:…

Pobrania
60
Polubienia
12
Ocena
0
P
PrintablesLian Aarts

Contact lenses case (parametric)

Inner dimensions 90x46x10mm. Eight 5x2mm magnets are used, two in each corner. https://www.aliexpress.com/item/1005002226582762.html?spm=a2g0o.9042311.0.0.27424c4dTBpG0z

Pobrania
59
Polubienia
17
Ocena
5
P
Printableseisie

Contact Lenses Travel Case

Remix of the hinged box to fit 2 contact lenses, separated to the right and left. Printed with multicolor printer and PETG, 0.2mm layer height. Prints in place and no supports are needed.

Pobrania
59
Polubienia
8
Ocena
5
P

Valve INDEX VROptician Compatible Lense Mounts (UPDATED FOR OLDER LENSES)

Best Printed from Nylon or something flexible. Don't try ABS it's not worth it. ATTENTION: There was a Lense Design change somewhere between 2019 and 2021 thus this mount won't fit the old lenses I made a Edit of the Model for the old…

Pobrania
58
Polubienia
7
Ocena
0

Soft tweezers/forceps for contact lenses

This tweezers for contact lenses should be printed using TPU or other flex filament. I printed it using TPU 95A and it works fine. It provides sufficient and soft grip for contact lenses and will not damage lenses.

Pobrania
57
Polubienia
6
Ocena
5
P
PrintablesTimmy Turner

Oculus Rift CV1 Prescription Lens Adapter with Removable Lenses

I wanted to make it easier for me to show someone who doesn't have the same vision as me items on the Rift. This also allows me to switch from my prescription to my wife's prescription easily. I took jegstad 's design and thickened the…

Pobrania
57
Polubienia
2
Ocena
0

Eye Products Organizer Gridfinity Set (glasses, glasses fabric, lenses, eyedrops)

With the total of 6 individual gridfinity bin models, they combine into a 1 full set of eye related products organizer. The model in the first image is an organizer for glasses. The semi-circle dents around the bridge of the glasses…

Pobrania
55
Polubienia
8
Ocena
0
P
Printablesmobiobi

Grill Lenses for Cosplay (50mm)

Had an in depth look at Cisco's Apex 2022 Bad Boys , and used what I learned to make these 50mm lenses. Should print easily, and scale well.

Pobrania
52
Polubienia
45
Ocena
0
P
PrintablesMarkus Skjot

Dispenser for contact lenses NEEDS SCALING

Dispenser for contacts, with left and right marking. Per 26/07 I don’t have my printer available, so plz upload a make.

Pobrania
52
Polubienia
4
Ocena
0
P
Printablesdrhollen

Vixen Right Angle Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses

Vixen Right Angle Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses. This is a standard Vixen-compatible dovetail bar that attaches to the Canon RF 600mm or 600mm F11 IS STM lenses and holds them at a right angle. These lenses…

Pobrania
52
Polubienia
4
Ocena
0
P
Printablesgrafmar

Comfortable Glasses Frame for Magnifying Lenses

A very comfortable glasses frame designed to hold magnifying lenses from inexpensive magnifying glasses. The original Parkside magnifying glasses are quite heavy because they include a built-in LED light and batteries. As a result, they…

Pobrania
48
Polubienia
9
Ocena
4
P
Printablesivosak

Lenses box

My father-in-law is fond of photography and hiking. As he prefers carrying just a backpack and doesn't wants his lenses getting damaged, so I created the lens holder for him. Two models were designed - both for Canon EOS-M / EF-M photo…

Pobrania
48
Polubienia
14
Ocena
0
P
PrintablesTarz

Trial Lens Adapter Reducer to Mount 32mm Trial Lenses in 38mm American Optical Trial Frame

Trial Lens Adapter to Mount early 32mm Trial Lenses in 38mm early model American Optical Trial Frames and similar models that have a pin-style lens holder opposite the spring holders. Will hold two 32mm trial lenses. This adapter works in…

Pobrania
48
Polubienia
6
Ocena
0
P
PrintablesAcroanesthesia

Graflex "B" lens board for 2.5in Buhl projector lenses

This lens board is for Graflex SLR cameras that use “B” size lens boards. Uses an m3 nut and screw to clamp the lens to the board.

Pobrania
47
Polubienia
6
Ocena
0
P
PrintablesPhu Mipat

lens hood for Pentax 6x7 90mm or 105mm lenses

Bayonet style lens hood for Pentax 6x7 90mm or 105mm lenses. Should work with longer Pentax lenses with 67mm diameter filter size. With 100% scale it may be a bit too tight. I printed it 99.77% scaling and it worked out great.

Pobrania
45
Polubienia
3
Ocena
0
P
Printableselectroremy

Lens cap holder for 62mm and 72mm lenses for DSLR camera

This helps you to handle 62mm and 72mm lenses cap for DSLR camera Best print in ABS You have to remove the included brim with a knife pen after printing

Pobrania
44
Polubienia
2
Ocena
0
P
PrintablesMichele Ottone

Iris Lens Cap For Olympus OM-D (and Compatible Lenses)

Overview Tired of misplacing, dropping, or fumbling with traditional lens caps? Meet the Iris Lens Cap —a fresh take on lens protection, designed for the Olympus OM-D series (and compatible lenses). This cap uses a mechanical iris…

Pobrania
42
Polubienia
12
Ocena
0
P
Printablesmast3rsensei

Contact Lenses Holder

An holder for liquids and tools generically used by owners of rigid contact lenses

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesParagon

LED Lamp DIY 350W - Lamp Cover Without Lenses

Dodaję Nową osłonę do zastosowania bez soczewek bezpośrednio na diody led do Lampy Led 350W V2, osłona ma dodatkowy uchwyt na szybę o grubości 5mm... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX I am adding a new cover for use without…

Pobrania
41
Polubienia
4
Ocena
0
P
Printableskc2zgu

Storage box for M12 lenses

This is a box to store M12/S mount lenses. Also known as micro video lenses, these are often used for CCTV cameras, webcams, FPV drones, and other miniature video cameras. Although not always advertised as interchangeable, these lenses…

Pobrania
41
Polubienia
2
Ocena
0
P
Printablesazilliax

Lens cap holder for Nikon Z Lenses (46 & 62mm)

This is a lens cap holder for the lenses that come with a Nikon Z50 II kit, the first is to fit a 46mm lens cap, the second is for a 62mm lens cap. There's a number of other designs out there that do the same thing and look similar but…

Pobrania
40
Polubienia
5
Ocena
0
P
PrintablesCitruspers

(Halo) helmet flashlight lenses (Mjolnir mk VI)

Flashlight lenses for Halo Mjolnir helmets. Use your slicer to scale them to fit. I designed these for Rainyfire's helmet (scaled up to 107% in my case): https://www.thingiverse.com/thing:2739764 You'll probably want to use a resin…

Pobrania
40
Polubienia
11
Ocena
0
P
PrintablesBenjamin Wand

lampshade 'lenses'

Just another lampshade :-) The ring to fix it to the lamp is 45mm wide, drop me a line if you need a different diameter. Category: Decor

Pobrania
39
Polubienia
9
Ocena
0
P
Printablesnic_3005

Smartphone Lens Mount for DJI Action 4 Lenses

Ever wanted to use your DJI Osmo Action 4 lenses (e.g. ND or Poly Filter) on your smartphone ? Now you can! This clip-on mount makes it super easy – no screws, no tools , just pure flexibility! 🚀 ✅ Secure grip with elastic band – Stays…

Pobrania
38
Polubienia
4
Ocena
4
P
PrintablesLeftcetio

Hard Case for Camera Lenses

I have several Konica Hexanon prime lenses from the 1960's and 1970's that I like to use on my Sony mirror-less camera because they are much more affordable than modern lenses for the camera with the same aperture. But I worry about…

Pobrania
38
Polubienia
10
Ocena
0
P
PrintablesProfHankD

Focusing E-Mount For Ultrafast Lenses

There are a variety of old ultrafast lenses cheaply available. These lenses, usually marked between f/0.75 and f/1.6, typically have no aperture iris, no focus mechanism, and a giant external screw thread intended for mounting. They…

Pobrania
38
Polubienia
3
Ocena
0

Glass and lenses travel case

A model for storing lenses cases and a pair of glasses. You will also need a rode with a diameter of about 2 mm

Pobrania
37
Polubienia
14
Ocena
0
P
Printablesnerologic

Customizable Waterhouse Stops for Lenses (old brass lenses, DIY lenses, etc)

I've been sitting on this design for a few months and finally feel happy enough to release it. Please give feedback if you make custom stops for your old lenses. The design files are parametric in FreeCAD, use the Params spreadsheet to…

Pobrania
36
Polubienia
2
Ocena
0
P
PrintablesCarson Miller

Vega 4x5 Camera - Modified for medium-to-wide lenses (and other things)

See below for the changes I made, but here are a couple other things to note: I made my own ground glass out of a piece of acrylic that I sand blasted. The finish isn't terribly consistent, but I think it works just fine. Find the print…

Pobrania
36
Polubienia
3
Ocena
0
P
Printablesandrepadua

Rugged box for Panasonic Lumix Lenses

Update 2024-07-11: New lid and fill for the 25mm 1.7 lens. Protect your camera lenses! As a travelling photographer i needed a way to protect my lenses so that if htey get thrown around a bit the lenses are still safe. I am slowly adding…

Pobrania
36
Polubienia
14
Ocena
0
P
PrintablesEmpiricus

Locking double cap for carrying Leica M lenses

Locking double cap for carrying Leica M lenses. Printed in CF-PETG. 2x 12mm M2.5 and 4 x 8mm M3 screws. 1 ballpoint spring cut in half.

Pobrania
35
Polubienia
7
Ocena
0
P
Printablesregulad

B4TF - Attach B4 Lenses on F Mount Cameras

The B4 Lens Mount is a historic videography lens mount format known for its weird characteristics, like its built-in chromatic aberration correction. Conveniently for 3D printer owners, the B4's flange depth is slightly longer than that…

Pobrania
34
Polubienia
0
Ocena
0
P
PrintablesKebin W

Focus Tab Zeiss ZM Lenses

Hate the Zeiss nub? Put this over it. Printed in PETG with supports. Use 3M VHB (very high bond) double sided tape. Has stuck on through multiple international trips. Redesigned it further to this version and had to really pry it off, so…

Pobrania
33
Polubienia
1
Ocena
0
P
Printablesthefitthings

Glasses for narrow lenses. Including sample lens.

Printed with PLA 0,1mm It is best to print the frame at an angle.It is best to print the frame at an angle. For a perfect fit, warm the braces and press them into the desired position.For a perfect fit, warm the braces and press them into…

Pobrania
33
Polubienia
2
Ocena
0
P
Printablesjk_printer

Rear lens cap for Minolta MC & MD manual focus lenses

Updates 09/2026: Added two more alignment markers due to symmetry and adjusted the logo angle (v1.4). Description A rear lens cap for Minolta MC & MD manual focus lenses, optimized to print without supports on FFF/FDM machines. The design…

Pobrania
33
Polubienia
2
Ocena
5
P
PrintablesRatisse

Uni-T UTi260 Dock,Macro Lenses Storage, Wall Mount

ENGLISH ---------------- Vertical support for Uni-T UTi260B UTi690B UNi690B thermal imager. Optional: 8 magnets 5x1.8mm to improve the closing pressure of the lens storage compartment Print without supports, print the rods flat on the bed…

Pobrania
32
Polubienia
3
Ocena
5
P
PrintablesHel

Solar Filter Holder for Telescopes and Camera Lenses

This solar filter holder allows you create your on solar filters for you telescopes or camera lenses. You will still need to purchase a solar filter sheet. You can then cut it to the correct size and glue it to the solar filter holder.…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesRCWeinstadt

Lenstube screwdriver for 20mm Co2 lenses

This is a "screwdriver" for the lenstubes of lasercutter /-engraver with a 20mm lens. Print Settings Printer: My own designed Printer Rafts: No Supports: No Resolution: 0,15 Infill: 15% Category: DIY

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesAlgol

Universal 3D Printable Solar Filter Holder for Camera Lenses - 79mm lens (for Eclipse or observation)

Description: This is the 79mm filter; for 105 go here: This is a modular 3D printable solar filter holder designed for DSLR and mirrorless camera lenses. The design consists of two main parts: Base Top retaining ring Together they…

Pobrania
29
Polubienia
3
Ocena
0