783 modeli
I had to buy different power button for the case. Drilled a hole and glued it in place. This button is the adapter to make it work. On/off switches: https://www.amazon.se/dp/B0CB8D2HW3 Original model:…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
I purchased a Meshtastic starter kit for a RAK19007 WisBlock (and RAK4631) with a 12x40x65mm battery, only to not be able to find a case that fit that battery. This is my solution. This case features thin spots over the LEDs so you can…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…
No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective
This design is now open for remixes, please give attribution and link your remixes to this page! I'm happy to link back to remixes or add them on this page to keep everything in one place. Update 31 December 2024: Added a shell option for…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
muzi.works' [H1 - Case for Heltec V3 running Meshtastic] is a great design, but my battery couldn't fit in it, so I remixed its case. If you are like me and have trouble with the battery being too big, you can consider it. This case is…
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is an enclosure to keep a RAK Wireless RAK19003 base and its RAK4630 LoRa module on the back of a Magsafe compatible phone for use with Meshtastic. It adds about 16mm to the total thickness of the phone. It can also be stuck to flat…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
Case with battery
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381 This is a custom…
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Please respect the Creative Commons license restrictions I have chosen…
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
- NO SUPPORTS NEEDED. Print as is (Thank you Alley Cat)!! - (2) M3 x 6mm Socket Head Cap Screws (BATTERY I USED) 504050 - 1500mah https://www.ebay.com/itm/387026120507 (GPS I USED) https://www.amazon.com/gp/product/B09LQDG1HY/ (ANTENNA I…
This is a rugged case for your Meshtastic TTGO T-Beam device with SMA antenna plug. I printed this using Overture PETG with 4 outer walls and 25% infil with the Prusament PETG settings. Use a dab of silicon grease on the switch cover for…
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Introduction Meshtastic is an up-and-coming inexpensive off-grid communications platform using LoRa, long-range radio protocol. You can think of it as text messaging through Walkie Talkies but with more capabilities such as encryption and…
Simple case for a Vision Master E290 that fits a 3000mAh and the new variation of the buttons which are now on the back, folding antenna that allows all possible positions. There's space to add a gps and buzzer but I'm still working on…
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
This is a water resistant outdoor enclosure designed around a 3 watt solar panel. It was designed with Meshtastic in mind but it can be used for any solar project. --- Buy it fully assembled and ready to extend your mesh network :…
I wanted a case for my Heltec V3 that would be suited to carrying in a pocket or sitting on a desk while having a good battery life. This case is designed to be long in order to have the Heltec and 18650 end to end instead of stacked. I…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
I added a V4 that has small mounting pads to stick the GPS and Bluetooth antennae in case there are no enclosure walls within reach, or if you just wanted to keep it self contained and compact. meshtastic.org Case and setup inspired by:…
18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case. 18650 Li-Ion battery holder included (for longer protected 18650 battery). I recomend connect some high-gain antenna (some better and bigger than stock one…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
Let me introduce you to my custom-designed enclosure for the Heltec Wireless Paper. This enclosure is versatile, accommodating larger batteries, and features a simple button design on its side for easy operation. Hardware: - Heltec…
Modified Lilygo TTGO Lora case to include 1000mAh or 2000mAh batteries. In the future I'll include a place for a switch, as currently is always on, and the Meshtastic version for Lilygo TTGO Lora is not going to sleep when disconnecting…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.
Overview: This enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or…
This case was designed to hold a Heltec V3 lora board and a MakerFocus 3000 mAh 1S lipo to be used with the Meshtastic node network. It is slim and easy to carry in your pocket and with a large battery should last a long time between…
Printing/printed this? I'd like to hear from you! Seriously! Message me on my discord / telegram /printables! 20240611: New V3 version! Many great changes: Better button protection, no more accidental presses Better back design, locks-in…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
UPDATE: I created a new Meshtastic solar repeater node. There's nothing wrong or bad about this 6W version, it works great. However, I consider the new version to be the ideal Meshtastic solar base station when balancing uptime with size,…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
A heltec case designed to be small but have a bit more of a useable battery tray. Visit us: Gendemik.co.uk Newer stl files can be obtained at the link above. Tried and tested as a daily driver and used by a few of the UK NW meshtastic…
Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
The enclosure is designed for the Heltec V3 or Heltec Tracker. The bottom part of the enclosure is common to both variants. The enclosure is sufficiently dimensioned for a 26650 battery. Both parts hold together by self-clamping.…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Lilygo TDeck case for Meshtastic with a Battery, GPS Radio, LoRa Antenna. Full tutorial on how to build out the T-Deck can be found on YouTube here: https://www.youtube.com/watch?v=2PB-nGgZSpQ Parts Needed: 955565 5000 mAh Battery:…
I remixed the excellent Rugged Box to hold my mobile, temporary installation Meshtastic box. It currently holds 2x 18650 batteries in parallel and has space for 4 magnets so you can stick it to a steel surface. The plate is modeled for a…
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
The H3 case features the following modifications over the H1, based on my own experience printing and using the H1 case, and user feedback accumulated from the original model's makes, remixes, and comments. Multiple sizes to accommodate…
Simple mobile/pocket enclosure for a Heltec T114 board with an 18650 battery. Most models place the battery behind the board, resulting in a bulky enclosure. This is about as compact as possible. Assembles with eight M3 heatset inserts…
Remix of the excellent case by @AlleyCat for the faketec. Designed for v4 board, but it might work for others as well. The nRF module must be soldered directly to the board without headers. 2000 mAh 103450 LiPo battery.
Parametric Heltec V3/V4 Case (Meshtastic) This is a fully parametric remix designed to house Heltec V3 and V4 boards for Meshtastic nodes. It features a customizable enclosure that has been tested to scale from 60x40x30 mm all the way up…
Printed on a Bambu P1S with Standard or Optimal print profile. I have only tried PLA for this build so far. Please note that the tolerances are pretty tight to ensure a good fitment. Flash the Meshtastic Firmware to your board, install…
Description Compact printed case for Heltec V4 Meshtastic client with GPS. External dimensions are 74x44x21.7mm. This case meant to be used with this default Heltec V4 GPS set: Required BOM 803048 Li-Po battery (consider buying with…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Switch and charger board from amazon - see photo… The tabs for the screws must be removed from the switch. Simply bend them…
Uses the 60LM Harbor Breeze solar light as a base. and passes the antenna pigtail through the existing holes in the panel case. Make sure to waterproof the cable hole after passing through the antenna wire.…
I wanted a compact case to house a Heltec V3 and an 18650 battery. I was unable to find one I liked, so I designed one. This was designed in OnShape if you would like to make some alterations. Features Changeable faceplate Battery Kill…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
(Files are updated on 8 April 2024) These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family members, friends and make the…
This is a remix of another case that has better clearance for a 1100 mah makerfocus battery and cleared up some space so that the antenna connector nut could actually be tightened! I uploaded the solidworks files as well but they are…
W9ETC Meshtastic Node This is a very versatile "universal" enclosure. The PCB Cage in the enclosure accommodates the RAK 19007 Starter Kit, Heltec WiFi LoRa32(V3), Heltec T114, or any other similar board sizes less than 60mm x 35mm x 11mm…
How to and schematics in progress! WARNING! This is a pretty advanced build! You have to know your way around with soldering lots of tiny and fragile wires, electronics etc. There is no programming involved but you need a steady hand and…
Released on 16 Feb 2024 by Blueskies . Improved version on 22 June 2024 These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family…
This case is designed to elevate your low power radio device 30~40 in the air on top of a standard telescoping ‘painter’s pole' available at many hardware stores and keep it protected from the elements. An upgrade from the case I designed…
Update 11/10/2024: I will be uploading an updated version of this model this weekend (After I fully test everything), I have a new rear battery cover with a built in power switch, as the soft off for the V3 still chews power, and I have…
UPDATE: Pole mount added. PE5I Meshtastic Yagi! Ideal for direction finding or long distance links. Features: Compact Yagi for 869.525 MHz. 10 dB gain 38.69 dB front/back ratio Only 60 cm long Portable Extremely easy to (dis)assemble…
What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…
*This is a work in progress. Context: I was looking for a case for the Heltec V3 LoRa board to use with meshtastic, and I had pretty much determined the cases by @tonyg were the best option, but I wanted one that could be more weather…
If you like this model, and you're feeling generous, please check out my Ko-Fi page here ! Updated 07/02/2025 - I have added a new version that includes a space for a small switch. This case is designed to clip onto the back of the…
A remix for the great H1 case that supports the new, longer, 1100mAh battries that are now being sold by MakerFocus:…
This is still a work in progress **If you have the buttons that look like this, this case will not work for you. Heltec changed the way the buttons work and this case is made for the old buttons on the side. ** Simple case for a Vision…
I wanted a Heltec T114 V2 meshtastic radio case that would fit with the GPS module. I didn't see any. I also wanted one that would hold two of the larger 3000mAh Lipo batteries. I made it to snap together so no hardware would be required.…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
![Meshtastic Standalone Device (Heltec V3 and Cardkb) [Meshdeck]](https://media.printables.com/media/prints/803986/images/6459706_a756ded2-7dd3-4856-8af2-bbd2ee8fef3c_9954f23c-ca71-4b85-b556-1f18f027c796/meshtastic-standalone-2.png)
