415 modeli
Intro Hi! Thanks for viewing my design! I am a high school student passionate about giving back to the community, if you like what I am doing, feel free to drop a like or a comment! Vedansh Sled I built my MPCNC Lowrider with the intent…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
I needed to support my speedbooster Viltrox EF-M2 working together with BMPCC4k (Black Magic Pocket Cinema Camera 4k) in Tilta cage and Sigma 18-35 lens. Unfortunately Smallrig Lens Adapter Support for BMPCC 4K Cage 2769 is not available…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mostly Printed CNC Primo Version MPCNC "F" 25mm Version Released on 7/23/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
Mostly Printed CNC Primo Version MPCNC "J" 25.4mm Version Released on 6/22/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
Mostly Printed CNC Primo Version MPCNC "C" 23.5mm Version Released on 8/29/20 Questions are best asked here, https://forum.v1e.com/ Print instructions https://docs.v1e.com/mpcnc/PParts/
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
Compliant mount for 11-12mm Drag Knives, and/or 11mm-50mm Pens and markers.
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…
This drag chain support for the MPCNC Primo replaces the regular Truck Clamp. It is for the 25mm version (F) and is suitable for a 30 x 15 mm aluminium strip which can be found at your local hardware store in 1m lengths. (at least here in…
Like me, if you dont have time, or just not enough filament, just use the smaller Temptowers. Based on the "All in One Temperature & Bridging Tower - PLA & PETG GCode included" from Tronnic, and the remix “Prusa Mini Temptower for PLA,…
Updated to the last revision. I included STEP files as well as STL files. This should allow for those with alternate dust collection hoses, mounts, routers, etc to modify to fit their individual needs. ________ The dust collection/holder…
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
Info added here if needed.
Mostly Printed CNC / Multi-Tool These parts are for 25mm OD conduit. 23.5mm OD here 25.4mm OD here License clearly defined Please have a look a the relaxed "NC" stipulations here, https://www.v1engineering.com/license/ Changelog 10/15/18…
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
End caps for the MPCNC. To make the closed end caps for the frame aligned with the corners, the X and Y sliede-rails must be 4mm (2mm per cap) shorter each. Fits for 25x2mm tubes. Print instructions Print in PETG or ASA
A nice looking controller box for the RAMBo 1.4 and the RepRapDiscount Full Graphics Smart Controller. This setup is for an MPCNC but can easily be used for other machines as well. I recommend that you set the fan to blow from inside out…
This is an AKAI MPC ONE+ non-destructive mobility mod. To attach the stand to the drum machine I used the same screw holes that were used to attach the factory rubber feet. I didn't want to glue the factory feet to the printed stand, so I…
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
Mostly Printed CNC / Multi-Tool These parts are for 23.5mm OD conduit. 25mm OD here 25.4mm OD here License clearly defined Please have a look a the relaxed "NC" stipulations here, https://www.v1engineering.com/license/ Changelog 10/15/18…
A pen holder for my MPCNC Primo build. It fits a 65 mm tool mount like Makita RT0700C. I have printed this solid bat i think you can do it a little infill... The basic idea was to quickly swap pen and spindle without having to remove the…
NOTE: For Primo “C” only (23.5mm OD conduit) . Would probably be easy to adapt to the other variants, but I haven't tried. As part of an overhaul of my MPCNC, I was able to get super cheap HGR15 linear rails from Vevor, and designed…
Mostly Printed CNC / Multi-Tool These parts are for 25.4mm OD conduit. 25mm OD here 23.5mm OD here License clearly defined Please have a look a the relaxed "NC" stipulations here, https://www.v1engineering.com/license/ Changelog 10/15/18…
You will need two M2x10 self-tapping screws to mount the endstop (for sourcing you can take a look at the Voron 0.1 BOM https://vorondesign.com/sourcing_guide?model=V0.1 ), the existing M3 screws of the lead screw nut can be reused.…
Router mount for the Kobalt Corded router to mount to the MPCNC Primo Version. Item #5207238 Kobalt Lowe's https://www.lowes.com/pd/Kobalt/5014100299 Model #K7TR-03
I got frustrated with my Akai MPC Live II sitting flat on my desk. It did not seem very ergonomic to me. As a result I design a stand to sit it up at a 15 degree angle. There are two versions of this stand included here: The one piece…
An AKAI MPC Live II model that has been printed in 3D at a scaled size is a unique and eye-catching decoration for any music enthusiast or professional studio. The 3D printing process allows for a highly detailed and accurate replica of…
Pokud se vám model líbí dejte lajk - pokud budete potřebovat něco upravit neváhejte mne kontaktovat. Kompletní kabelový management pro MPCNC, po menších úpravách půjde určitě použít i pro 3D tiskárnu. Vše je navržené pro uložení na…
With this tool mount a spindle with 80 mm outer diameter (min. 165 mm high) can be installed on the MPCNC. I use this mount with a 2.2 kW chinese spindle. The mount is designed for the new "Primo" version (F 25.0 mm) and is screwed…
for 20x10mm Drag Chain
I modified the this model to make it printable: https://3d.si.edu/object/3d/fossil-whale-excavation-site-mpc-677:a4068a00-9712-4c8e-8948-a9e2ea27fe0a From the Smithsonian 3D-Model archive. I find archaology really interesting and amazing…
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Update 2016-12-03: increased space for universam mount. I've remixed the original drag knife from onasiis, adapting for the universal mount of the MPCNC. You will need: 2x 608Z bearings 2x M3 scews for the blade holder 4x M4 screws and…
I've building a Lowrider2 MPCNC on my YouTube channel Teaching Tech. I attempted create dual endstop auto squaring with the sensorless homing of the TMC5160 with SKR V1.3 but it wasn't quite suited to the application. I found a simple…
I use a Makita RT0700x on my MPCNC. I wanted a dust shoe that would: Maintain the full machine volume Allow independent movement of the Z-Axis Easily dismount if I changed tool to a drag-knife or pen The closest thing available on the…
Made some modifications to fit on the standard tool plate of the MPCNC. also changed the clamps as the hinge didn't print properly for me Category: Machine Tools
This is a Dremel mount I designed for the MPCNC lowrider 2. Can be adapted for other uses Source files included. This was made with the Dremel 4300 in mind so I am not sure if it will work with other Dremel tools. I have spent countless…
MPCNC Primo F 25mm Holder for dragchain / Halter für Schleppkette M3 threadinserts and screws are required. M3Gewindeeinsätze sowie Schrauben werden benötigt.
So this is my "accessory pack" of parts I designed specifically for use on my MPCNC (25 mm version). But perhaps someone might get some good use of some of it so here it is. Note that all parts are designed for metric screws and nuts.…
For the MPCNC project: https://docs.v1e.com/mpcnc/intro/ When I built my MPCNC, I customized my foldable electronics-box design for the Jackpot CNC controller board. It has mounting PCB holes for M3 heatset inserts, and cutouts on one…
Sun Hood and Viewfinder for Blackmagic Design Pocket Cinema Camera 4K & 6K I've made two versions of the Sun Hood. Both designs use a hinge to tilt up the Sun Hood and easily access the touch screen of the camera. -80mm mini Sun Hood…
Sun hood designed for the Blackmagic Pocket Cinema 4K with the Smallrig 2343 Universal SSD Holder mounted on top, using one of the side ¼" threads on the Smallrig holder as the mounting point. I designed this using a 3D Scan of the back…
This tool helps you squaring your MPCNC. I designed it to fit the Burly version. Honestly I don´t know, if it will also fit on the primo. But the step-file is in the attachment, so you can change the height or the diameter of the pipes.…
So I wanted to have a good case for my Jackpot Controller, but was not in love with the options. This is my first time designing something and utilizing it. It was designed to use a 3mm acrylic sheet (~75mm x ~136mm) depending on your…
Einige Spannvorrichtungen für die MPCNC. Mit entsprechendem Fill kann man die Spanner sehr gut für alles möglichen Materialien nutzen. Ich habe diese Spanner genutzt, um mir mit der MPCNC Spanner aus Aluminium zu fräsen.
MPCNC Bracket for Long Conduit : It is really advisable to install bracket when your conduits are longuer than 80cm to avoid chattering. Compatible with 5/16 US or M8 ISO EU Threaded shaft and nuts Conduit Diameter adapter for 23.5mm,…
Tool holder, for standard spindle with 65mm diameter. Warning : it was designed so that the tool is closer to the Z axis, may not be suitable for all tools. A dxf plot of the profile of the MPCNC tool mount is provided and will help you…
mpcnc-primo-f-tubing-plug.stl - plugs into the ends of side rails (needs 8) mpcnc-primo-f-tubing-plug-hole.stl - allows to lay cables through if you put your cable through gantry rails (needs 4) Keep your fingers safe (or do not buy the…
Wasn't a fan of what I was finding online for a cable chain on the Z-axis of the MPCNC Primo. Decided to design my own and it works great. This is for the J-25.4MM Version. Hardware needed for this: 8 x M3x5x4 Voron spec heatset inserts…
MPCNC Primo 25mm (Type F) squaring helper This helps you on getting your MPCNC Primo squared. You will need a folding rule, I used a Wiha Longlife 37067 made out of composite plastic. You have to adjust the .step that your folding rule…
This group of parts implements Cable Management Drag Chains on V1 Engineering MPCNC Primo model. Drag Chains for all three axises are supported. The following hardware is used: 5ea M3x12 Counter Sunk Flat Head machine screws and lock nuts…
Remix/Mod of standard MPCNC feet for aluminium profile 4040 (Item, Bosch, ...) Mount with two M8 screws. .stp for remixes is also available - feel free to modify :) Screws, Nuts etc. are also included - take dimensions from there. The…
Super small dust shoe for the MPCNC 525 (might fit other models too) Needs a 25mm tube to connect the pieces and 4 5mm cube magnets Bristles should be printed from TPU/Flex material
This is a remix of some thing created by other and some parts I created to adapt to the drag chain I downloaded. To the pieces of the drag chain I have rounded some edges. Starting from a piece of drag chain I made the initial piece to be…
You'll notice that the original tool mounting plates are no longer necessary as they are already integrated into the holder. You can utilize the original screws to attach the holder, although you may need a ratchet for the job. One thing…
Ich wollte an beiden Enden der Verfahrweges einen Endstop haben. Nachdem ich nichts passendes für meine Endschalter gefunden habe, habe ich die Original-Endstop-Schelle modifiziert. Der Endschalter wird auf dem Rohr befestigt und direkt…
Simple adapter for mounting a drag knife to the Maktia mount. No need to swap the mount anymore. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.6mm Nozzle 0.3mm Layer height Filament: Prusament PLA…
I have created a lamp for the new CoD part Black Ops 6. The lamp fits perfectly with the other CoD lamps that I have created. As a USB-C port I use: LINK Then about 2m LED strip is needed. You can support me more on: Makerworld
Drag chain side mount. Suitable for 30 x 15 mm aluminium strip. I use M4x20 Screws.
I recently picked up an Akai MPC One and I get it now. I adore this thing! But one feature it doesn't have out of the box is a way to angle it forward a bit. This is my take on a simple stand for it which lifts it up by 15 degrees. It…
If your Cables run to the right side, mirror the “Kabel Seite” Part.
Fits really well, includes an access hole to adjust laser unit position. Use the screw holes in the back to secure the sprung aluminium mount they give you and mount onto the rear portion of the MPCNC Primo 57mm spindle holder The reason…
As a part of MPCNC Z-Axis assembly, you have to drill in holes for nut traps and ultimately tool holder assembly. I did not have a reliable way of holding the tube still while drilling, so I came up with this - you can screw it somewhere…
This is a remix of these endstops for 25mm OD conduit. Requires 2 x M4 20mm bolt + (lock)nut. I used ABS dark blue for the print, 0.2 mm layer height with 50% infill.
A 15mm rod mount to attach neatly and compactly to a Tilta BMPCC OG camera cage. Requires two m3 heatset inserts as well as two m3 10mm countersunk screws. I would recommend printing this out of a very stiff filament like CF-PLA or PCCF.
Simple and strong adjustable M6 tool clamp for the MPCNC or else. 80% infill recommended for stability.
MPCNC Belt Tensioner These are my belt tensioner for my MPCNC based on DodgeDerek's version but with a few modifications. The belt self locks inside the clip. Flipped the side of the tension screw for better/easier access. Clip movement…
Als ich die Mpcnc in Betrieb genommen habe , war klar das ich dringend eine Absaugung brauch. Ich begab mich online auf der Suche und habe mir dieses Modell ausgesucht: https://www.thingiverse.com/thing:5239310 doch als ich die ersten…
I am currently building a MPCNC Primo using 3/4in EMT conduit which is the C-23.5mm version on the @ V1 Engineering site. You can find more info about the MPCNC at https://docs.v1engineering.com/mpcnc/intro/, and the files are available…
Remixed gamble604's case for the skr pro on my MPCNC. added a couple of fans and made a logo lid for it using the V1 Engineering logo. I printed the case in PETG and the lid in PLA since I was out of red PETG. Print Settings Printer…
The knob that comes with the MPC One+ is not well suited for scrolling through long lists. This replacement knob features a depression that will let you scroll continuously with one finger. The design is inspired by the original MPC One+…
This is a dustshoe for the MPCNC Makita/Katsu. Just screw it to the Makita... There are two main ideas behind my design: to stop the cooling air coming down though the Makita Motor and spilling around all the milling dust. So this shoe…
Since the table I built my MPCNC Primo on was a very tight fit I needed a different place to mount the cable chain on. I took the existing feet and designed a snap fit holder around it which is enough to support an aluminum angle…
I designed this thing to add a z-max switch to my MPCNC Primo. It is designed to work with the same size limit switches that are standard on MPCNC. It works with Burly style mounts, but may also work with others (the lever has to hit the…
Ein Gehäuse für die Steuerung einer CNC Maschine mit den Komponenten eines Arduino Uno R3, einem CNC Shield und GX12 Stecker. Ich nutze diese Steuerung in Verbindung mit Estlcam an meiner MPCNC. Zusätzlich werden 4 Schrauben 3*12 für den…
This is a replacement knob that fits the mpc1000/500. It is similar to the XL Style Tall Black Jog Data Wheel by MPC Stuff and works quite well. You might need to slighty tweak the hole at the button to be tighter. The way it is now…
Set of all knobs on the Akai MPC Sample. Started with the gain knob, as it was very difficult to adjust. Also made an encoder knob with a a dimple for faster scrolling/tweaking. The main volume and the K123 knobs are also a bit more…
Caps designed for 1" (inch) Stainless Steel Tubing with .625" (1/16") wall. Mainly designed for MPCNC 525 "J" build. Printed and tested with ABS. They fit very nice and snuggly with ABS... may need to be filed a little if printed in PLA.…
This model is remixed to hold the ½ watt diode lasers and adapt them to a 52mm spindle holder. This makes it easy to swap between the spindle and the laser. Additionally, the laser is aligned with the center of the spindle. I use this…
This is a remix of the needle cutter from Edward Chew's ERC TimSav foam cutter... adapted for MPCNC. It has been virtually assembled and is now a one-piece print. The flywheel is identical to Edward's version. All the assembly…
Supports drag chains of 40x20mm with a aluminium extrusion of 40x20mm
Requirements: 3d printer with filament CNC 3mm lexan sheet Easy-Cut Strip Brush - https://www.mcmaster.com/7900T1/ M3 x 6mm Flat Head Screws - https://www.mcmaster.com/91294A126/ Assembly: Print all required parts. I used CF PETG Cut 3mm…
Quick and easy dust boot for 23.5mm or ¾" emt MPCNC. 6mm channel should fit several difference versions of dust boot brush from Amazon. Specifically designed for Makita rt0701 but may fit other tool types as well because it uses the…
This is a 65mm spindle mount & vacuum nozzle for the MPCNC Primo J. I started with the original Burly mount cross section, and beefed up where it attaches to the z tubes. I made an adjustable height vacuum attachment for it, that bolts to…
Simple endcap for the 25mm MPCNC version. Can be retrofitted due to it being open. Has a larger diameter and requires some squeezing to get into the tubing but will therefore hold tightly. The corners are also rounded to protect the…
All of my mods for my mpcnc primo F-25mm. STLs are oriented for printing. Everything prints without supports, except a few parts. Please refer to the description below and/or the included gcode. XY Endstops Hardware needed: 2x M3x5x6…
Endcaps for MPCNC 25mm (outer diameter) tubes with an inner diameter of 1.5mm
This accessory is an add-on to V1 Engineering's MPCNC Primo version CNC machine and provides a dust collection attachment to the Dremel 4000 Mount. See https://www.thingiverse.com/thing:4541546 . Here is a short animation showing the…
Update 4/18/21 - Added new SKR back case for mounting the TFT directly to the top. Eliminates cable strain from cabling bracket mount or for those whose bracket isn't inline with the mounting area. Added new bumper style SKR front case.…
Converted Ryan's great new MPCNC Primo design files to allow multi color printing Print instructions When printing colored areas on the bottom of the design that lack supports, magnify the XY (not Z) to something around 140%. Varies per…
The Laser Tree K20 is too big for the nifty laser mounts that slip into the Makita mount. Changing mounts on the Primo is about the worst thing you want to do, so I went the next best route and mounted the laser on the outside of the…
Printed this with: -3djake ecoPLA -5% infill -0,08 layerheight on a 0,4mm nozzle
Another MPCNC Primo Dust Collector I am sharing my version of a dust collection attachment for the MPCNC Primo. I have tried several of the different designs offered and took a stab a designing my own (or course using input from,…
This heavy duty motor coupler allow the installation of large NEMA 17 motors on the z-axis. I use the 17HS26-2304S motor from Stepperonline. Fits for the "Primo" version (F 25.0 mm) of MPCNC. No other parts need to be replaced. The…
Simple Z Endstop for the MPCNC-F with 25mm (OD) pipes. Use with M5 allen screw.
This will help drill the nut trap 2 holes for the Z assembly. Use a clamp to secure it to a bench and use a Handheld Drill, it will also work on a Drill press. The part will have a gap of 1mm, DON'T press to hard, you don't want to crack…
