Liczymy pasujące modele…
Zusammen mit dem Designer @MeisterEdel habe ich dieses Testmodel mit meinem Logo entwickelt. Es testet euren 3D Drucker in Bezug auf Toleranz (inkl. Gewinde), Bridging, Maßhaltigkeit, Wandqualität und Oberflächenqualität. Es gibt zwei…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Wydruk około 4,58 €–5,60 € nettoWstępna wycena jednego wariantu
My version of a popular dovetail "impossible" puzzle box with a secret lock mechanism. See in action here: Print instructions Additional hardware: 2 8*3mm magnets ( https://tinyurl.com/1e00vzpa ) 1 9.5mm steel ball (…
Wydruk około 5,30 €–6,48 € nettoWstępna wycena jednego wariantu
This is a modification (remix) of the secret box I designed a long time ago. ======================================================== Update 2024-12-31 I modified the top slightly. I noticed that the force of the neodymium magnet can be…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
A version of an Impossible Table. The diameter of the table plate is 18cm.
Wydruk około 3,95 €–4,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An imposter keychain from Among Us. It prints in multicolor without an MMU! Simply add color changes in your slicer, or use the provided 3mf/gcode. Print instructions Add color changes at different layers. The gcode already has them.
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
I wanted a drybox that would keep my filament dry during the humid months and I really wanted to eliminate the MMU3 buffer that takes up tons of space and keeps feet of filament constantly exposed to the humidity. After researching this,…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 2.2 (update 29/06/2023) Added a version with chamfer instead of fillet following @radkoko comment Version 2.1 (update 03/07/2022) Added a version with no hole on the bottom, suggested by Andun_HH . Version 2.0 Improved the threads…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
The pictured screws are the long and longer versions. All screw STLs except impossible_two_way_screw_unsupported.stl have a built-in support for the upper head. The unsupported STL is included in case you want to remix it somehow. I don't…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena jednego wariantu
Step by step instructions. First, pass a small piece of wool or rope through the central slot and the two side holes. Roll the wool loosely until you see an optimal thickness Tie the short piece around the ball Cut the sides of the ball…
Wydruk około 3,53 €–4,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Tempomat for Sowlow SO3 E-Scooter
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.4mm between objects - will not scale down well Print…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
(CZ) Vylepšená verze tempomatu Fialový a oranžový díl se slepí acetonem. (EN) Improved cruise control version The purple and orange parts are glued together with acetone. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill:…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Holder for ampoules/vials and other medical material. 10 x 2 ml vial 4 x 5ml vial 4 x 10 ml vial 4 x standard injection vial 3 x spaces for accessories such as needles, filters, access devices or plasters My print settings: Perimeters: 2…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
Made a better version with better thread and tolerance: https://www.printables.com/model/213600 My sister wanted a small box to store her dry shampoo bar. The requirements were: Threaded lid for travelling Soap raised from the bottom to…
Wydruk około 7,15 €–8,74 € nettoWstępna wycena jednego wariantu
The parts shown in the picture broke on my trampoline I modeled a replacement for everyone to use. Print settings don't matter almost at all, the part is made for 3d printing and should be printable with the vast majority of materials. I…
Wydruk około 1,98 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small containers of approximately 1 cubic inch, for small SMD components which can be easily endlessly connected to each other in both directions, to form array of small boxes for electronics component storage. 3D print as much as you…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Trampoline net holder. Designed for a 26mm pipe and a 6mm net holding ring. Print instructions Tested with PETG Resolution 0.2 mm Infill 80%
Wydruk około 3,37 €–4,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
small container to store small parts, easy labeling and easy removal of parts. now in final version 13.
Wydruk około 9,47 €–11,58 € nettoWstępna wycena jednego wariantu
This is a simple keyboard stand inspired by the acrylic keyboard stand from ( https://thekey.company/collections/accessories/products/acrylic-keyboard-stand-pair ). I wanted a simple, robust, and attractive stand for displaying a keyboard…
Wydruk około 6,87 €–8,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You need 2 colors of PLA filament 1 608ZZ ball bearing : https://www.amazon.fr/gp/product/B07S3SZZST/ 9 magnets ( https://www.amazon.fr/gp/product/B075FL7FVS/ - small size) 2,7mm height - 6mm diameter Loctite super glue Tape No support…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I was inspired by Matt Parker's recent video ( https://youtu.be/oTWeuyDMgwo ) on compound platonic solid, and wanted to print a 5-cube compound platonic solid myself. I unfortunately could not find a good-quality 3d model of it, and…
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
Decant your old shampoo bottles using this PLA funnel, printed in vase mode. If your shampoo bottle is a different width, feel free to modify the parameters from the OpenSCAD file . Export the STL as a solid shape, then slice using the…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…
Wydruk około 7,35 €–8,98 € nettoWstępna wycena jednego wariantu
I used ASA filaments with good results. The scale standoffs also provide holes for 4-40 brass threaded inserts to be melted in place with a soldering iron. Likewise, the carriage sensor mount also uses the 4-40 brass threaded isnert.…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Pac man pour pâtisserie maison… Emporte pièce 89x63 mm EP 17 mm Fichiers impression en pièce jointe.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This 3D model, designed with the visual assistance of DALL-E, is a colosseum-style football stadium that showcases contemporary architecture while attempting to simulate an architectural studio's prototyping workflow. The primary goal of…
Wydruk około 32,85 €–40,14 € nettoWstępna wycena jednego wariantu
Placa decorativa 196x175x3mm
Wydruk około 3,01 €–3,67 € nettoWstępna wycena jednego wariantu
Replacement part for the Garantia composter (Garantia Komposter Thermo-Wood 600) sold by OBI.
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
Simple shampoo holder with clip for hansgrohe mixer Soap holder with cute seashell lid preventing water from melting the soap They are fixed using clips on the water inlet pipes. A slope drains water towards the holes. Designed for…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
Wydruk około 7,83 €–9,57 € nettoWstępna wycena jednego wariantu
This model provides a replacement for a broken or missing motor cover on a Delta Compound Miter Saw. It works on model 36-075 and possibly others with similar shaped motor. I own this miter saw, and many years ago I broke off the plastic…
Wydruk około 6,39 €–7,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview Looks like a gem, but then again, what gem could look like this? There are two stem length options depending on personal preference and both models are designed for use with standard #8-32 screws. I've also included the original…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
EN: As I was already in the rush to create a key ring, I immediately came up with a few more necessary things. Some of my USB sticks have a hole so that they can be attached to a key ring oor anywhere else. For this one, for example, the…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This model prints pretty well, however I found that if you want to have a good glue seam when combining the pieces to form the compound of dodecahedron and icosahedron it is worth sanding the edges on each side of the triangular pieces.…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
This model is a set two hinges made to fit with a wood composter with 2 half covers and 45x45 mm frame. It is composed by 4 printable parts for left / right and male / female hinge. Each part are marked Left M, Left F, Right M, Right F on…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a handle for composter lid. It will perfectly pair with my other model: Composter Hinges . The handle is composed with two half shells glued together and 3 center pins ensure perfect alignment of both shells. Two attachment…
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Give other appareance to your Miband4 Charger, more easy for daily use and extend your cable life time. Install mi band base “sliding” in to the printed part, the printed part have a draft angles to keep the base in place. Please follow…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
The GM328A V1.20 component tester went through a couple of iterations. Therefore, this specific version has become hard to come by. The base prints with slots for M3 nuts. The PCB is mounted with 5mm long M3 screws. The holes and slots…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Nalepovací organizér na vatové tampony.
Wydruk około 4,29 €–5,25 € nettoWstępna wycena jednego wariantu
Les ampoules à culot BA15d (baïonnette de diamètre 15 mm à 2 contacts) deviennent rares, surtout en LED 12V. Pour remplacer une vieille ampoule halogène sur un spot spécifique, voici un réflecteur à monter sur une ampoule LED 5W, avec…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print will help to form the through hole component legs, the scale visible is in 0.X of an inch, example number 5 means 0.5 of an inch __________________________________ We upload those models for personal use only, free of charge -…
Wydruk około 8,37 €–10,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA was used to print all the parts at 15% infill. PLA USED: Polymaker Marble White CC3D Gold 3DPrintingCanada Standard PLA: Red, Green, Black, Blue, Gray, Orange, Brown The Resources you see are listed below. I adjusted the sizes to the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
support pour poubelle à composte
Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu
Introduction I purchased a used Berg trampoline and some of the knobs to fix the round, green mattress were missing. So I purchased some flexible cord (5mm, weatherproof) and designed my own knobs. The print file A file for printing in…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a much-needed upgrade for your MPower Luci Beam Flashlight if you are an astronomy enthusiast or just need to preserve your night vision. This is a quick and easy print, and all you need are an opaque or red filament and some red…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model for using when you want to add a tea light holder to something you want to design and print. It is sized for 99% of the tea lights out there, both LED and Candle tea lights. If you plan on using a candle tea light, make…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The pocket of our cabinet is too small and made it so the compost caddy couldn't seat into the mount . This is a simple 5mm shim that sits behind the metal plate that is screwed into the cabinet to add more clearance to the mount.
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Among us crewmates don't have a consistent style, and of all the models that I found, non of them was spot on what I had in mind when I think about the Among us crewmates. So I decided to make my own. At first I wanted to make a realistic…
This print in place cat toy contains a rattling ball that looks impossible to get inside the toy. Luckily all you have to do is print it place with no supports and you have a toy your cats will love. Oliver Tested and Approved!
Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…
What makes it special Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Print settings Infill: 0% - there is…
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
The Design Since some have asked for other shapes, here is Version 3 of the Impossible Passthrough/ Vortex Thread Illusion with an Octagonal Base This also fits perfectly with Impossible Pyramid Passthrough, Greater Clearances give smooth…
XY Size Compensation on the Inner Piece at -0.4mm
Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…
Strong crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength. BOM and instructions are in the provided pdf assembly…
Hello I made this model to promote sustainability and to prove that you can live more ecologically even in a small flat or without fancy equipment. It's a Vermicomposter/normal-composter printable on a Prusa i3 with a maximum size in…
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
XY Size Compensation on the Inner Piece at -0.4mm
BIG EDITION IMPOSSIBLE PASSTHROUGH FIDGET TOY A BIGGER FIDGET TOY FOR MORE FUN.250MM!!!!!!!!!! WARNING:FOR THE {{{GREEN PART}}} {{{OUTSIDE PART}}} BEACAUSE I HAVE 2 FAILURES WHEN THE PRINT GOES ON 4h30min YOU MUST TURN THE SPEED ON…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
I wanted to try designing an impossible pass through model and decided to use a simple 20mm calibration cube as a base. The tolerances between the parts measure 0.4mm - so it's rather simple to accomplish a working 3d print. Please…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
This cat toy is unique and puzzling to comprehend at first glance, but prints all at once with no supports. The ball inside rattles around but cannot be removed from the D20 (trust me, I've torture tested it with my cats). It also makes a…
XY Size Compensation on the Inner Piece at -0.4
I designed these three fidgets that are interchangeable. Let me know if you would like any other shapes. NON-COMMERCIAL USE ONLY
Very sturdy, carries soap or multiple shampoo bottles. Fits 18, 20, 22, 25 and 28 mm shower rails. Easy to print and easy to mount. Update 2023-01-03: I have added a variant for shower rails with a diameter of 28 millimeters. Update…
What makes it special I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is…
XY Size Compensation on the Inner Piece at -0.4mm
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
To print these designs, you can use your regular slicer settings. All the models are pre-oriented and can be printed without supports. Print them in two colors of pla/petg to achieve a stunning two color effect, or do a few color swaps at…
The Design Here's a new Tall mini version of the impossible passthrough! Fully Compatible with the V2- Mini Vortex Thread (see end of gif) The “male” part of the thread seems to defy physics by passing through the slightly larger “female”…
This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…
XY Size Compensation on the Inner Piece at -0.4mm
Very sturdy, carries soap or multiple shampoo bottles. Unlike my other designs, this dish is fixed on the back. Fits 18, 20, 22 and 25mm shower rails. Versions for left and right mounting available. Easy to print and easy to mount. Update…
Safer, Tougher and Easier to play with than other designs Here we have the Pointless Impossible Passthrough Cone. This has been specifically designed to be easier to play with There are no pointy parts on this design and its much less…
Three numbered pieces interlock to form an impossible-looking cross. No glue, magnets, screws, or additional parts are required. The model prints quickly and requires no supports. The video demonstrates one assembly method, but there are…
Hi guys, here's my Impossible phone stand! Seeing some of the amazing tensegrity structures on internet I had to give it a try. I wanted to give this stand a floating / hovering sense and make it unlike any tensegrity structure I've ever…
The Design Back by Popular demand with a Mini Pyramid Passthrough. Compatible with the rest of the V2 Series Now in the shape of a 3 sided pyramid (a tetrahedron), The “male” part of the thread seems to defy physics by passing through the…
I saw this awesome illusion in a magazine. I decided to design it in Fusion for 3D Printing. The goal was to make it without needing any supports while keeping it in one piece. While there are other version of impossible cubes on…
A twist on the famous Moai statues on Easter Island. Use glue stick when printing. Also needs support. I used tree supports with 30 degree threshold angle from build plate only. Remove small overhangs.
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
XY Size Compensation on the Inner Piece at -0.4
XY Size Compensation on the Inner Piece at -0.4mm
At first, this piggy bank appears impossible to open, with a dovetail joint on all four sides. In reality, this is a simple box with two parallel dovetails, spanning the same direction as the coin slot. Print Instructions: Print both…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
EN: Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file. V2→ Now as a composable version for larger areas Da ich mir diverse Halter…
