640 modeli
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The tool features a pointed end for detailed work such as positioning wires and accessing tight spots, and a flat end for prying open devices and separating components. It is recommended to print the tool in ABS or PETG to ensure…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“The Mozart Fountain is also called The Magic Flute Fountain and is located on Mozartplatz in the 4th district of Vienna. The fountain was designed by the architect Otto Schönthal, the sculptor Carl Wollek realised the project in 1905.…
Wydruk około 7,97 €–9,74 € nettoWstępna wycena jednego wariantu
Tool used to open access panels / hatches in ceilings or lofts. Tool is three sided and includes: 1 x square 6.5x6.5mm tool 1 x square 8.5x8.5mm tool 1 x flat-head screwdriver type tool
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you like me and always use the timer on your aircon unit? Are you also always loosing the remote and spending a lot of time trying to find where you placed it? Well, here is something you will love! This remote holder has an opening…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
With this little wrench, you can open the spring side of some SR Suntour bike forks. I printed it in PETG with 3 perimeters and can confirm it works :) I used PrusaSlicer to close a hole and add an embossing to jcatx' SR Suntour fork…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A custom replacement debris‑trap basket for Gaiger roof water collectors. Fits an 80 mm opening with 50 mm depth.
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Microwave Oven Door Opening Button for GODDESS MOE-717 type oven. Original button was with slanted edge, this model is flat to avoid supports. Printed with Spectrum PLA.
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
English Description I had the problem that my ceiling didn’t just have a cable coming out of it but a roughly 6 cm wide metal tube. Because of that, the original mounting bracket of my Farbflut Design lamp couldn’t be fixed directly to…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Limiter for bread box
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Feel free to use it in your own designs if you need something like this. For flasks, piggy-banks or anything else. I used it myself for a base for a desklamp and it works great.( https://www.thingiverse.com/thing:3383610 ). See for other…
This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…
72mm and 73mm openings should fit most larger spools. Most spools with larger openings have a slightly larger diameter on one side, which is why i have 2 sizes loaded into one print. Added a lip to these so that even if the spool opening…
A Hinged Coffee Bag Clip with a Lid Opening for easier access. I printed everything without supports and all went great. But as always, check your printers settings before printing to know if it will be the same for you. ♥
This is a multi-purpose clamp with a maximum opening of 25mm or one inch. Use cases Typical use cases are to hold things together, like I do on the bottom of my motorbike tarpaulin. They are also useful for hobbyists, makers, RC plane…
UPDATE 16/8/2024 Somehow I uploaded bad spring design but now it should be okay. If it does not work try pulling the spring out a bit or cut it a little shorter. In case of any problems do not hesitate to reach me in the comments. (I was…
Description: An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives. There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness…
Prying and Opening Tool Flat - Rev.3 - Smartphone - Notebook - Laptop - Automotive Open your tech device and safely remove components with ease. Essential for DIY repairs like displays, batteries, motherboards, headphone jacks, joysticks,…
3D Hydroponic Tower with 4 Openings Overview The 3D hydroponic tower is a versatile and space-efficient solution for growing plants in a controlled environment. Designed with four openings, it allows for easy access to the plants while…
This is an update to the corner file to allow a larger hole for larger cables. There are two print file options one for a medium cable and the other for even thicker cables
I really liked the design by argoroots, and made a few tweaks to it: I added a rounded "gutter" for the wiring harness to nestle into; I split the gutter down the middle with a self-centering groove, so that it would tighten a little more…
New! I've also included 3mf files for the Park Ball and Premier Ball, as well as informational videos for them down below! This Poké Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (link down below),…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.
Pry Tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive - Strumento di apertura - UPDATED - 05/11/2025 Update Cleaned up geometries for improved accuracy and performance. Fixed functional aspects of the project to…
tl;dr - use this altered BSPT(British Standard Pipe Thread) to design openings to accept a PC4M10 connector with threads that correctly accept said PC4M10 connector, seat correctly and don't cross-thread a few threads in and cut their own…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
This opener should fit on all common 40mm watches with a threaded back plate. Some higher end watches need a specified torque value applied for closing, to be waterproof again afterwards. There fore this tool features a 3/8'' drive in the…
Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…
This model is compatible with the lego system.
Easy opening and closing of velux centre pivot roof windows. I no longer have to balance on the dining room table. This new version (2) will work for New and Old velux window handle types. Should attach to most “broom” handles (Hole is…
Don't forget to like and post your makes, also check out my other egg models! https://www.printables.com/model/734705-beautiful-easter-egg-7-pack-screw-bottom-for-fun-s 0.2mm Layer Height 2 Perimeters 10% Infill 5 top and bottom Brim My…
Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…
Overview: What kind of pliers do you use in math class? Answer: Multipliers! These pliers are designed to be easy to print, moderately strong and they have built-in springs to self open when you release pressure on the handles. Included…
Opening Tool - Smartphone - Notebook - Laptop - Automotive REV.2A Resize to adjust dimension 06/11/2026 Added Rev.2A 10/10/2024 Added Rev.2 23/04/2024 Added Rev.1 All our designs are free to download and use. Your support fuels our…
This is a Version of my Turbo Funnel that I created for bigger stuff like Silicagel, dry food or other bulky stuff. This 3D-printed funnel features an extra-large outlet, allowing for fast and smooth flow—perfect for transferring coarse…
Plateau Fountain for the "Modular Desktop Fountain" by 3D Printy, with two openings spaced 120° apart
Doll-House window frame with opening shutters. For the assembly, use a piece of sturdy filament of 1.75 mm or a pice of electroc copper wire. Scale to desired dimensions.
This is a remix from the project https://www.prusaprinters.org/prints/39449. The goal was to mount an Raspberry Pi 4 directly on the frame of the Prusa i3 MK3S+ a look alike. As per previous made version the case is small and as compact…
My cats were having difficulty getting their treats out of the original D20, even after scraping away some of the material with a knife, so my completely unskilled self brought the original into TinkerCad, sized it up by 20%, and expanded…
This is a 2-gang wallplate with two decora openings. Designed to match Lutron Claro covers from a distance (same corner radii, but the screws aren't hidden). The Decora openings fit a Lutron Caseta dimmer perfectly with no gaps all around…
This is a fun storage container that will self-twist open and closed with gravity. Align the top and let go and it will close with a fun sound. To open, lift gently from the top and the bottom will slowly twist open. Both pieces are meant…
This model is compatible with the lego system.
Heads up! This is the new, improved "v2" enclosure... If you were looking for the very popular, original "v1" enclosure, it's still available over here:…
The RTL-SDR Blog V series is a decent little receiver, but as a dongle it hangs delicately off of a PC's USB port and is easily broken, especially when used portable with a laptop. This case securely encloses and supports the dongle and…
I got the Resident Evil 2 board game and one thing pretty immediately popped out at me: this thing needs better walls. So, I made a wall to replace the little cardboard wall overlays, except that those walls looked weird being the only 3D…
A small change to the original or remixed design. The lower part was cut away. This part is of no need at all to the functionality. Reasoning: A perfectly well running MMU2s still needs service. One of those services concentrates on…
Hello, Today I have for you the Opening cover for the Anycubic Kobra S1 display . It protects the display beautifully from damage and dust. It fits the display beautifully, it is easy to open.. It is in two parts, you need to " click "…
*Now updated to include cable management and built-in support for easy printing I prefer to remove the entire extruder heater assembly for maintenance, such as replacing nozzles or fitting a silicone sock. To do that, the heater and…
This Master Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Let's Go. It’s part of an ongoing series of Poké Balls adapted from the…
A chicken feeder opening, for use on a 5 gal. bucket/ 55 gal plastic drum, or really whatever large container you choose, to free-feed chickens or other fowl. Designed using Fusion 360, printed for a 3" diameter hole, but is easily…
This is a tiny 3D-printed add-on for the NexTool Mini Flagship F12 . The stock blade uses a thumb hole , but on this knife it’s honestly not great for one-handed opening. With this part installed, the hole basically turns into a thumb…
I've been making my TIL+ walls for the Resident Evil 2 board game (which a door per wall set) and someone suggested a prison door. It sounded like a good idea to me, so went ahead and put this together! This Thing has both the TIL+…
Supports used under the overhang on the bottom of the stand.
Additionally you'll need: 3 x M3x20 mm screw (or 1 M3x20 mm and 2 M3x16 mm screw for the version with the threaded inserts) 1 x M3x30 mm screw 1 x rubber band
Remixed this to allow a LED candle inside. I printed with lightning infil and as I was checking the strength of the opening it easily broke off easily, which I was very happy with. Using a extra bright flickering LED Candle came out…
I liked the short tabs as it could stand up properly, but found it almost impossible to open. This very simple change cuts a chamfer in to the end bin, which gives you an easy notch to get a grip on the start bin.
I wasn't totally happy with MihaiDesigns' AMS stacking stand design so I remixed it to be able to open the bottom AMS in place. Compatibility Fits the 3 different versions of the AMS units. However, the fit for the older version (3 large…
The Suunto Stinger dive watch / computer is almost impossible to open without a special tool, so I maked this one. The watch is still hard to open, and I would make a better design if I needed to do it on regular basis, but I only had the…
Print this part as orientated; no supports are required. Get the other STLs from Henlors post , along with installation instructions.
Tato rozevírací forma na vosí hnízda (šišky) je vylepšená verze mého původního autorského modelu , který vznikl před několika lety kdy jsem dostal nápad jak udělat vánočnější "vosí hnízdo"a šiška mi přišla ideální dekorace i tvarově…
🔧 Opening Pick | Plastic Pry Tool This opening pick is a simple, reliable tool designed for safely separating plastic parts without damaging surfaces. Its shape is inspired by classic guitar picks, making it comfortable to hold while…
Tikka T3x bolt opening tool, for opening the bolt for maintenance. Print with 4-5 wall lines so it can handle the wear from usage.
Here's my second Wall/Door set for the Resident Evil 2 boardgame (the first one is at https://www.thingiverse.com/thing:3462426 )! I made this one with brick walls, to be used in outdoor (or possibly sewer) settings. Pretty much all of…
Note, this uses a trivial amount of support. (I don't know if it's necessary, but this is such a quick print, and the support usually comes off when the print is taken off the bed anyway.) I made this in OpenSCAD for measuring spoons that…
Blanking plate for 120mm fan opening on a computer case. When managing air flow thru a computer case with an air filter then you likely want to blank off any unused 120mm fan openings. This design contains a groove for a seal. A string of…
Print settings: print with PLA. 0.15 mm layer height, 0.35 mm line width, brim enabled, cooling enabled, 15% infill, 70 mm^2 solid infill threshold area. Bottom layer Hilbert curve fill pattern (optional). Latch internal surface ironing…
I printed this model split in halves with PETG and half speed to avoid stringing. The connecting pieces are still to tight, so consider to take the STEP-file and reslice it.
Charger stand for Apple Watch modeled as the Apple logo. Feed the cable through the hole and press in the charger.
Tested now. Seems to work well. :D At some stage I'll tweak it a bit more to thicken up some of the walls. The MMU idler door for the MMU2s is a nuisance to open, as the lever used to activate the sensor interacts with the extruder body.…
If you have cross-type caps on your battery than you may use my tool to open/unscrew them. Simple print without any supports. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,3 mm Infill:…
My son wanted an opening Poke ball to go with his Pokémon trainer Halloween costume so I made an opening Poke ball with a print in place hinge. The ball has a latch that can be assembled that will hold the ball closed. You will need a…
I don't carry my vape around, but I still wanted a case to keep it safe when on my desk. The screen and buttons can be used normally and the device can be plugged in and loading. It's a good idea to use PETG or other heat resistant…
A key for opening 200l plastic drums. These plastic drums are easy to acquire, and are useful for many things. This key makes them easy to open.
Remix of AsBurli 's awesome design of a cable duct for Voron 2.4 3D printers mounted to the back panel. This version adds a large opening on the end of the top/bottom piece and uses two screws for mounting instead of one. There is also an…
As I couldn't open my coolant cap with my bare hands, I constructed this tool. It works in no time at all. ----------------------------------------------------------------- Da ich meinen Deckel für das Kühlmittel nicht mit bloßen Händen…
A tool for opening iMacs with glued displays. Uses 1 m3 x 4mm bolt. If you find this helpful, consider supporting my work: https://ko-fi.com/natester
Printed in black overature PLA 0.2mm layer height without supports. If your phone has bottom facing speakers, this phone mount will hold and redirect the audio into the shower stall. Don't let getting clean interfer with your podcast!
This is a rear electronics enclosure for and Ender 3 Pro, modelled for the specific purpose of containing the MCU using a standard Creality board footprint, a Raspberry Pi with its standard footprint, a random buck converter that I had…
My 2yo knocked over the floor lamp in his nursery, and broke the glass globe. I could not find anything on the internet to replace it, so I whipped one up in CAD with a little style, with flutes that look like cut glass or pleats. It is…
I made this as I was fed up with the awful battery powered variants that just didn't have enough power if a little too much pressure was used. It was made so that you can use either the original Dremel Collet Chuck or a Multi Quick…
This is an automatically-opening Gengar Ball, based on the GengarBall design by WizPrint3D (link below), and adapted from the Poke Ball Customizable Base (listed as the remix for this ball). It was created as a part of #ProjectKurt , a…
This Great Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (link down below), based off of the in-game model from Pokemon Let’s Go Pikachu and Eevee. It’s part of an ongoing series of Poké Balls adapted…
Friend of mine asked for help, he could not open the water filter. So I designe one from scratch. Here it is: TinkerCad → first excerpt printed in PLA, low perimeters, low height. It fitted right at the first shot. A little bit refined,…
I wanted a low profile adapter to mount a 30mm fan onto a 40mm duct. This model includes traps to hold 4 M3 nuts and clearance for 4 M3 bolts. V2 improves the fitment for nuts/bolts with wider openings but a 2 degree draft angle so that…
This is a remix from OmNomNomagon https://www.thingiverse.com/thing:2685653 I added a hollow grip on the sides, for a better handling. Category: DIY
This model is compatible with the lego system.
This hinge folds nearly 360 degree due to it's double hinge axis. I came up with this design as the available print-in-place single hinges didn't reliably go beyond 180 degree rotation. Update 2025-05-05: Added source files based on user…
This is a remixed version of the Dremel Pet Nail Grinder (6mm Opening). In the original, there are two holes to utilize, and both are in line with the tool. For this version, I turned one of the holes at 90 degrees, so that you can use…
Tool conceived with a carpenter friend. Intended for use where a distance has to be measured from inside an opening, e.g from inside a door opening. It has been designed specifically to allow marking the corners too. It can of course also…
This a remix of a great design by Xuis - I remixed it to be less bulky while providing just the right amount of friction/tension and allow it to be placed on the strap without cutting/removing it. 20 mm version, more coming soon
Easy to print pill box with modular insertable seperators. Opens within a quarter turn! Example print instructions: 0.4mm nozzle 0.2mm layer height 20% Infill 3 Walls PLA
My bags didn't fit with the original model, so I made it bigger! Opening is now ~168mm. Aside from that, the model is great! While my slicer mentioned the cantilever lip may need supports, I printed it without supports on my Bambu P1S…
Here's wall set #3 in my TIL+ series of walls & doors - this time, it's lab themed with tile walls and a metal door with a totally innocent and not at all creepy observation port in it ;) Everything that I said about the first one (…
One peg on a hex insert for storing an IR thermometer with a 16mm opening, front beveled a bit, for easier handling.
This Love Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Sword/Shield. It’s part of an ongoing series of Poké Balls adapted from…
Sometimes you just have a whole that needs to be covered. Easy solution. Use this print, re-size it and done! For me it was a little gabe in my sink that annoyed me for years…finally i fixed it and was wondering how many of you just need…
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
