Wyniki wyszukiwania: pedal

Sortowanie

1430 modeli

P
PrintablesRed Panda

Red Panda Guitar Pedal Stand

Designed to hold a Red Panda guitar pedal at a 30 degree angle. Pedal size 3 in x 4.6 in, works with many other pedals as well. We print on the side with no supports, then put rubber bumper feet on the bottom.

Pobrania
463
Polubienia
59
Ocena
5
P
Printablesscolin221

Cleat Pedals - Clip into Shimano Road Bike Pedals - Remixed for Shimano SPD-SL PD-R550 and 105 PD-R7000

This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…

Pobrania
311
Polubienia
20
Ocena
0
P
PrintablesJakeDK

DIY Guitar Pedal Board

I Decided to see if I could make a relatively compact pedal board without having to spend 100 bucks on a name brand one, and I feel like I reached that goal. Now I'm not saying this is the most rugged piece of gear that will survive…

Pobrania
297
Polubienia
107
Ocena
5
P
PrintablesBartek Kolanko

Back for Logitech g920 racing pedals

💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…

Pobrania
93
Polubienia
24
Ocena
5
P
PrintablesEgonHeuson

SPD Adapter Plate for MKS US-S Pedals

I recently bought the great MKS US-S pedals . This is the double-sided SPD model. Originally I wanted the SOLUTION model, which has only one SPD side, to mount on my Gravel. But unfortunately, the version with the ‘EZY’ quick release…

Pobrania
65
Polubienia
15
Ocena
0
P
PrintablesDratrik

Spring Mount for Brake Axis – Saitek Flight Rudder Pedals

This is a replacement part for the Saitek Flight Rudder Pedals – specifically, the spring holder for the brake axis. The original plastic part broke at the point where the return/centering spring is attached. This 3D printed model is a…

Pobrania
40
Polubienia
4
Ocena
1
P
PrintablesCardinalSong

Eurorack Guitar Pedal Hanger for Hammond Cases

This unit allows you to connect and mount your guitar pedals (with Hammond 1590 cases) within your eurorack system. The pedal case uses it's existing screws to mount to the hanger. It's tricky mounting the top screws to the eurorack…

Pobrania
26
Polubienia
6
Ocena
0
P
PrintablesMarius Mostert

Crankbrothers pedal wall mount

I designed this model to work with @ubs_889675 wheel wall mounts to fit my Crankbrothers pedal as his pedal does not fit mine.

Pobrania
13
Polubienia
1
Ocena
0
P
Printableshi_im_sean

SOSP Sim Racing Pedal set

Sean's Open Source Sim Racing Pedal set- I designed these pedals because I wanted something better than the plastic boxes offered by logitech, fanatec, thrustmaster etc, without spending $1k USD for the high end pedal sets. These are a…

Pobrania
2679
Polubienia
339
Ocena
5
P
PrintablesErasing

Modular Pedalboard

Modular Pedalboard This model allows you to print your own modular pedalboard. It is modular because you can add extra lengths of pedal board in the sideward direction, adding 20cm (or 22cm) each time. The Pedalboard in the picture is…

Pobrania
2516
Polubienia
451
Ocena
4,88
P
Printablesmaverickagm

Moza SRP Pedals and Spacers

The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…

Pobrania
1747
Polubienia
175
Ocena
5
P
PrintablesLitl'Skitl

[Remix] Moza SRP Pedal Faces

[NOTICE]: I just added a new version with wider hole spacing for someone's SRP Lite. For others with SRP Lite those holes don't seem to work. Measure your own pedals to see which ones you have. Modelled entirely myself, but mostly a…

Pobrania
1660
Polubienia
169
Ocena
5
P
PrintablesAndrew B

Sim Racing Pedals with Load Cell

This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I use the accelerator and brake almost daily for a little over a month as of the original posting - the…

Pobrania
1579
Polubienia
205
Ocena
5
P
PrintablesAndrew B

Sim Racing Pedals with Load Cell V2

Last update: 2025-09-20 (Notes at bottom) This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I've used all three pedals for ~1 month, daily, as of the original…

Pobrania
1334
Polubienia
445
Ocena
5
P
PrintablesDonKeulito

T-LCM Brake Pedal Mod - Thrustmaster Loadcell

Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…

Pobrania
1204
Polubienia
99
Ocena
5

Logitech G29 G920 Brake Pedal Damper Mod

You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…

Pobrania
1062
Polubienia
137
Ocena
5
P
PrintablesBikeal_Marnhill

Mountain Bike Pedal

Please post makes! This is a mountain bike pedal that is 3D printable without supports. I made a set for my bike. I use M3 10mm bolts and nuts for grip but 8mm bolts could work too. The pedals are super grippy and pretty rigid. To make…

Pobrania
1034
Polubienia
112
Ocena
5
P
Printablespblas38

BRAKE PEDAL STOPPER PAD

The brake pedal stopper pad may deteriorate over time, allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps. In order to…

Pobrania
1028
Polubienia
32
Ocena
5
P
PrintablesShadow

(Guitar) Pedal Switch Topper

This is a switch topper for guitar pedal switches (and other pedals that may not strictly be guitar pedals). It's especially useful when you are playing at home with bare feet and don't want to put shoes on. It's also useful if you want a…

Pobrania
930
Polubienia
108
Ocena
5
P
PrintablesD2 Doctor

Simagic HPR Haptic Pedal Reactor mount for Moza SR-P pedals

A simple adapter to fit the Simagic HPR to Moza SR-P and possibly SR-P Lite pedals. Mounts to the back of the pedal and holds the HPR to the back. Requires 4x M4x15 countersunk screws to hold the HPR to the adapter, and 4x M4x10…

Pobrania
915
Polubienia
57
Ocena
5
P
PrintablesEd V

Heat: Pedal to the Metal and expansions insert

This is an organizer for the board game Heat: Pedal to the Metal. I designed it to fit the base game, the first expansion Heat: Heavy Rain, and left enough room for a second expansion. Now that my copy of Heat: Tunnel Vision arrived I can…

Pobrania
889
Polubienia
89
Ocena
5
P
Printablestolape

SPD pedal adapter

Allows to use normal shoes with automatic bicycle pedals type SPD. Required material: printed part x1. Using PLA as a printing material, the strength of the product is enough to fulfill its function.

Pobrania
819
Polubienia
74
Ocena
5
P
PrintablesMaciey

Shimano Pedal Tool TL-PD40

Made to fit the splines covering the spindle. Use it to remove the pedal axle from the pedal body.

Pobrania
811
Polubienia
61
Ocena
4,92
P
Printablesmikeev

Simagic P-HPR Adapters for Heusinkveld Sprint Pedals (Accelerator, Brake, Clutch)

Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…

Pobrania
809
Polubienia
40
Ocena
5

Guitar Effect Pedal Footswitch Topper

Simple topper to fit a standard 10mm footswitch used on guitar effects pedals. Increases the surface size to either make it a bigger target or make it more comfortable if you are playing with bare feet. Friction fit, just print and shove…

Pobrania
754
Polubienia
70
Ocena
5
P
PrintablesThrustmaster

THRUSTMASTER : Clip for RJ12 cable Pedals

Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG For better durability, 100% Infill Printer used for prototyping: Prusa MK4 Type of bed used for prototyping:…

Pobrania
714
Polubienia
48
Ocena
3,67
P
Printablesaottesen

Logitech G920 G29 Pedal Wall Mount

Easy-to-install wall mount for Logitech gaming pedals. Needed to get them up from the floor, to ease access for vacuuming. This is the left part. Mirror to print the right part.

Pobrania
685
Polubienia
196
Ocena
5
P
Printablestransformat

Pedal trash can | waste bin | storage - fully printable | scalable

Small pedal trash can / storage container round and rectangular designs Removable waste bin for workshop, table, kitchen, bath ... 17 cm / 6.7 inch height (larger scalable) Printing Print parts in the given orientation! the connecting…

Pobrania
675
Polubienia
195
Ocena
5
P
Printablesdrofmij

Guitar Pedal Enclosure

New Version → https://www.printables.com/model/568294-guitar-pedal-enclosure-v30 Guitar Pedal Enclosure Slightly larger than 1590B (Approx. 128x64x32 mm) Precut holes for footswitch, in jack, out jack, DC jack, 3mm LED (with bezel), and 3…

Pobrania
661
Polubienia
86
Ocena
1
P
Printablesflummer

Foot pedal switch

This remix fits a larger microswitch like OMRON D3V-11-1C4 or similar from other brands. Compared to the original design, this uses a heat set brass inserts (M3) and a 14mm M3 screw to secure the switch in place, making it possible to…

Pobrania
661
Polubienia
105
Ocena
5
P
PrintablesMrLadin97

Bike wall hanger for platform/flat pedals

Bike wall hanger for platform/flat pedals Print with more perimeters (up to 4-5 ). Mine is printed with PLA, but I would go with PET-G just to be safe. No problem with my PLA print so far though. I tested the pedal mount with Specialized…

Pobrania
660
Polubienia
140
Ocena
5
P
Printablesmj

Brake Elastomer for Fanatec CSL Loadcell Pedals

As I've not liked the short travel of the brake pedal, I've created an elastomer replacement. I've printed it in different hardness TPUs with 4 perimeters and different infills with a 0.4mm nozzle and replaced two of the original…

Pobrania
649
Polubienia
68
Ocena
5

Boss pedal clip in holder

I needed a way to add BOSS pedals to my board where the Velcro won't stick well to the rubber base, with out removing it or damaging the sticker on the bottom. I wasn't a fan of the designs on here already so designed my own through…

Pobrania
643
Polubienia
91
Ocena
5
P
Printableskizmann

Fanatec CSL Pedal Mod

Simple Pedal Mod for CSL Pedals. (TPU for sound damper required) Review of this mod: Thanks to Sim Racing Corner You need 4x M6 60mm Bolts and 4x M6 Nuts and a set of RC Car Damper with 140mm length like these:…

Pobrania
642
Polubienia
123
Ocena
5
P
Printables43monkeyv2

Logitech G29/G920/G923 Pedals Extension

This is a pedal extender to move the pedals of Logitech G29/G920/G923 pedal set up 50mm, and cant the angle of the pedal back towards the driver 7 degrees. it adds more precise feel and adjustment through increased travel distance. And i…

Pobrania
641
Polubienia
82
Ocena
0
P
PrintablesNadav Halwany

Dynamic Range MIDI Foot Pedal

About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…

Pobrania
623
Polubienia
302
Ocena
5
P
Printableselod

Trustmaster T300RS and Logitech G29 pedal to Playseat challenge mount

v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…

Pobrania
617
Polubienia
59
Ocena
5
P
Printablesmichelegz

Expro Expression Pedal

Expro is an expression pedal with adjustable friction, specially suited for use with guitar modelers such as Fractal Audio, Line6 Helix, Kemper and so on. Dimensions and travel are very similar to Fractal Audio EV-2 expression pedal. The…

Pobrania
596
Polubienia
98
Ocena
5
P
PrintablesBaklin

Playseat pedal base clamps

I wanted a more robust clamp for my Playseat Challenge pedal base. And I still had to be able to fold it. And also the base has to be able to put on a angle without putting a lot of stress on the new clamps. I made this for M6 hardware…

Pobrania
576
Polubienia
39
Ocena
5
P
PrintablesKilian Herbst

Modular Pedal Board (Unlimitedly Expandable)

The great Musician Jonas (Instagram: Jon_bei) needed a quick way to install and a simple Paddle Board so we designed one, it is easy to print and doesn't need any Supports, the Paddles are Fixed using 3cm Velcro. Printing Notes: The Stl…

Pobrania
547
Polubienia
113
Ocena
5
P
PrintablesTomczukCustoms

TIG Foot Pedal (DIY for under 10$)

Hi! I wanted to buy pedal for my tig welder (IDEAL EXPERT TIG 220A) and it costs over 100$ in my country. So I design my own. You only need potentiometer (b203 in my case) and end switch, 6mm rod, 2 M10+16mm bolts, 4 M6X16mm one spring.…

Pobrania
541
Polubienia
90
Ocena
5
P
Printablesdrofmij

Guitar Pedal Enclosure V3.0

20241008 - Update: added version with no holes. After 8 years and many other prints and designs I'm am coming back to the beginning. Back in 2015 before I had even finished building my first 3d printer I started doing some basic 3d design…

Pobrania
539
Polubienia
82
Ocena
5

Vaessen Motorsports VP-2 - DIY Sim Racing Pedals

Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…

Pobrania
531
Polubienia
55
Ocena
0
P
PrintablesKinkybuns

Gun Gas Pedal (RH & LH)

MATERIALS: 1 x M4 x 45 bolt and nut. 2 x M4 washer 1 x Square cut of “skateboard tape” & a little super glue. SETTINGS: PLA - Print in current orientation (pic rail flat on bed), 50-75% infill, 4 wall lines, tree/normal support 40 degree…

Pobrania
507
Polubienia
45
Ocena
5
P
PrintablesVioppoiv

Modular Guitar Pedal Board

Why purchase an expensive pedal board for $50? You can just print a few of these and connect them together. Each module is around a 6-7 hour print and they're really strong. I was able to jump on these without failure, so they're able to…

Pobrania
500
Polubienia
88
Ocena
5
P
PrintablesRocKz

Fanatec CSL & CSL Elite Pedal Loadcell Brake mod

My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…

Pobrania
498
Polubienia
60
Ocena
5
P
Printablesmediaklan

pedalboard profile

# Print Settings Printer Brand/model : Creality Ender 3 V2 Neo Rafts : No Supports : No Resolution : 0.26+ Infill : 15%+ Filament: Any PETG/PLA Notes : Quite an easy print and easy on the eyes too, but that comes with some caveats :…

Pobrania
496
Polubienia
86
Ocena
5
P
PrintablesVandaL

Playseat Challenge Fanatec Pedals v3's Mount

I needed something to mount Fanatec V3s pedals on Playseat Challenge, so I came up with this design. I've printed this in PLA, but you could go with PETG for strength There are 2 variants, one for M8 bolt since v3's has 8,5mm holes for…

Pobrania
495
Polubienia
32
Ocena
0
P
Printablesfholgado

Fanatec Clubsport v3 Pedal Clutch delete and brake reposition spacers

Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…

Pobrania
495
Polubienia
25
Ocena
0
P
PrintablesSouthpawBob

WAH/VOLUME/EXPRESSION Pedal Enclosure

PLEASE NOTE - this is still a Work in Progress and may change over time as I try different configurations of jack positions etc. The overall design however won't change much. The prototype shown in the photos houses a Madbean WIGL vibe,…

Pobrania
494
Polubienia
51
Ocena
4
P
PrintablesKarol

Shimano pedal tool

Wrench to unscrew the Shimano pedal cassette

Pobrania
477
Polubienia
36
Ocena
4,33
P
PrintablesOddLion

Guitar Pedal Switch Cover

These guitar pedal footswitch caps simply pop on/off your pedals. They create a bigger surface area and are much more comfortable when playing in bare feet. There are two designs, a hexagon and circle, both with a similar striped pattern…

Pobrania
472
Polubienia
88
Ocena
5
P
Printablesh19x51

Shimano SPD Pedal Plate

I used hijomojo's fittment and made my own grip design

Pobrania
451
Polubienia
50
Ocena
4,83
P
Printablessolarahawk

Tilton-style Pedal Faces for VRS DirectForce Pro

These are upgraded faces for the VRS DirectForce Pro sim racing pedals, based on the real-world racing Tilton pedals. These have been designed to fit on top of the original VRS face plates and to replace or use the original mounting screw…

Pobrania
448
Polubienia
35
Ocena
5
P
PrintablesLoudin

Volant na šlapací Moskvič (Pedal car steering wheel)

Tištěno na tiskárně Prusa I3 MK0 - 3mmABS

Pobrania
445
Polubienia
17
Ocena
5
P
PrintablesToWcH

Patterned Pedal Face for Fanatec CSL Pedals

Holes a 4mm wide You will need a 4mm bolt and nuts. Bolt should be 20mm long as the pieces when assembled are 15mm thick. Should look amazing if resin printed. Enjoy!!

Pobrania
438
Polubienia
47
Ocena
0
P
PrintablesKarel2003

Logitech G29G923G290G27G25 foot pedal bumper

Protects your pedal cable, preventing it from being crushed against the wall when breaking. Essential modification for those who don't have a cockpit.

Pobrania
435
Polubienia
64
Ocena
5
P
PrintablesMintz

Nissan brake pedal stopper (universal)

so as it states this is a brake pedal stopper, this stopper will work on most S ( Silvia ) chassis cars, R ( skyline ) chassis, Laurel Chassis, Cefiro, infiniti G.., most Z ( Fairlady/ 350z,370z etc ) chassis, Altima, Maxima, Sentra,…

Pobrania
434
Polubienia
20
Ocena
5
P
Printablesxxblyxx

Fanatec CSL Brake and Gas pedal

Fanatec CSL Brake and Gas pedal

Pobrania
433
Polubienia
55
Ocena
5
P
PrintablesCastle

Fanatec CSL Pedal Mount TT25

Made a simple mount to add the Dayton Audio TT25 Pucks to the CSL Accelerator and Load Cell Brake pedals(probably works on other pedals as well). The mount uses the original bolts and has just enough thread to hold the mounts and pedals.…

Pobrania
420
Polubienia
34
Ocena
5

Airbus A320 Rudder Pedals

My latest updated version with improvements can be downloaded from MakerWorld: https://makerworld.com/en/models/1714786-a320-rudder-pedals#profileId-1819932 Reasonably dimensionally accurate Airbus 320 style Rudder Pedals that clamp onto…

Pobrania
417
Polubienia
38
Ocena
5
P
PrintablesWilliam C.

Fisker Ocean Brake Pedal

I used Revopoint Miraco 3d scanner on my Fisker Ocean break pedal. Used hairspray to acquire scan. Used Revo Scan 5 to import and merge. Tried doing a little smoothing on it. It needs work. Feel free to remix and fix any flaws of the scan…

Pobrania
414
Polubienia
8
Ocena
5
P
PrintablesStrixJaming

Diy Sim Pedals

Sim Pedals A laser cut, 3D printed, hall effect and load cell compatible racing simulator pedal design. This project is part of my DIY Sim racing series. The aim was to create a high quality set of sim racing pedals with no compromises,…

Pobrania
413
Polubienia
72
Ocena
0
P
PrintablesDeifox

John Deere 1 series tractor Diff-Lock pedal

Please be aware that some websites, eBay accounts, and Amazon accounts are selling this print illegal and without my permission or attribution. This file is free for you to use for personal use, but please don't try to profit from my work…

Pobrania
407
Polubienia
25
Ocena
5
P
PrintablesHardwire Design

ModBoard Lite | A Parametric Guitar Pedalboard

ModBoard is a parametric guitar pedalboard designed utilizing 20-Series Aluminum Extrusions to provide full modularity and customizability. Includes STEP files for options for Velcro Mounting as well as Compression Mounting (Definitely…

Pobrania
402
Polubienia
82
Ocena
5
P
Printableserre_stvdio

Logitech G29/920/G27/G25 PRELOAD SPACER FOR ALL PEDALS

This is a preload spacer for the Logitech G920, G29, G27, & G25 pedals. May work for others too? Let me know if so and I'll update the descriptions. I included the dimensions so you can figure it out yourself or remake it however you…

Pobrania
397
Polubienia
68
Ocena
5
P
Printablesrpe

Yet another SPD Pedal Plate

It's a remix of @h19x51 SPD Pedal Plate, with some enhancements for problems that I found in my case. I liked the original for the really simple, easy-to-print, and robust design. But it was somewhat hard to remove, a tad too small, and…

Pobrania
395
Polubienia
31
Ocena
4,5
P
PrintablesMrTimcakes

VRS Pedals P-HPR Haptic Pedal Reactor Mount

VRS Pro Pedals - P-HPR Mount A sturdy mount using the existing top barrel nut on the VRS pedals. I've included a .3mf project with 100% infill between 4-17.8mm for extra strength. Printed all at once. Pictured printed in Eryone PETG-CF. I…

Pobrania
393
Polubienia
20
Ocena
0
P
PrintablesLamibi

Rudder Pedal gear for Saitek/Logitech G Flight Simulator Rudder Pedals

This was made for a friend who broke their rudder pedals. Successfully printed and used with ABS Pro with 0.1mm layers and 100% infill . It might make a difference to organise the infill layer direction to run parallel with the critical…

Pobrania
391
Polubienia
19
Ocena
5
P
PrintablesMatWin69

Brake Mod for Logitech G29 pedal set

Hi everyone, this is an insert for the brake pedal that simulates the feel of a real car brake pedal for your Logitech G29 Racing Wheel set. Just insert it into the spring of your brake pedal (you'll find lots of tutorials on how to…

Pobrania
387
Polubienia
72
Ocena
5
P
PrintablesBenD

Modular Guitar pedal board for smaller printers

A fully modular guitar effects pedal board. Found the awesome work of Kilian here: https://www.printables.com/model/320009-modular-pedal-board-unlimitedly-expandable My only problem with that design was it wouldn't work well on my ender…

Pobrania
378
Polubienia
51
Ocena
5
P
PrintablesOK1HRA

Foot pedal switch

Prefered filament PETG with approximately 50% infill. Need add stop gcode [M600] to 38,4mm layer for manual add snap action microswitch [OMRON SS-5GLD] before printing continue. Solder wiring after print finish. Size 100x70x30mm Also…

Pobrania
354
Polubienia
43
Ocena
4
P
Printables__lb__
Pobrania
348
Polubienia
31
Ocena
1
P
PrintablesMrTimcakes

Fanatec Pedals Universal Playseat Challenge Mount - V3 & CSL Elite

Universal Playseat Challenge Fanatec Pedals Mounts After breaking the existing pedal mounts I found on Thingiverse I decided to design my own that would both be more durable and more versatile. This universal mount allows you to affix…

Pobrania
347
Polubienia
38
Ocena
4,5
P
PrintablesTyler Brooker

ClubSport Pedals V3 Haptic Pedal Reactor Mount

I have designed these parts to provide a mounting solution for the SIMAGIC P-HPR to the Fanatec ClubSport Pedals V3. There are two types of bracket, one which utilizes the SIMAGIC P2000 Haptic Module Bracket (included in a kit with some…

Pobrania
345
Polubienia
28
Ocena
0
P
PrintablesNEHiker

Heat Pedal to the Metal Gear Shift Box

I use an Ender 3 S1 pro single filment printer and wanted to use the excellent gear shift box by LDub. I have remixed the box by LDub so that it prints the colors desired utilizing differential heights and the change filament command.…

Pobrania
344
Polubienia
27
Ocena
5
P
PrintablesPetr Oujeský

Bike SPD pedal adaptor

Allows to use normal shoes with automatic bicycle pedals type SPD.

Pobrania
342
Polubienia
39
Ocena
0
P
Printablesbberger

Simracing - Heel Cups (for Formula Pedal Spacing)

Because of a lack of a proper heel rest / heel stop on the Ultimate+ pedal base I decided to create some heel cups (inspired by some screenshots of F1 pedals) myself. It really helps keeping your foot in place in a good and constant…

Pobrania
339
Polubienia
27
Ocena
4
P
Printablesgameyspirits

Heat: pedal to the metal board game insert w/ sleeved cards w/heavy rain w/ tunnel vision NO LID LIFT

Insert/ Organizer for Heat Pedal to the Metal board game. Supports sleeved cards Supports Heavy Rain expansion Supports Tunnel Vision expansion There are individual player holders for the car, shifter, starter cards, 7 heat cards, and 3…

Pobrania
334
Polubienia
65
Ocena
5
P
Printablesedulpn

Modular Pedal Board (Hardware Fastening)

M3 fixed platforms and an extra handle part

Pobrania
332
Polubienia
61
Ocena
4,88
P
PrintablesEduardo Gabriel

Load Cell Pedal MOD PXN PDHM

This is a mod for use with PXN PDHM, with this mod you can have a load cell in your brake pedal. It is totally plug and play, you don't need to change the original electronics. It uses a inexpensive 50kg load cell a HX711 and a arduino…

Pobrania
331
Polubienia
29
Ocena
5
P
PrintablesAdafruit

MIDI Foot Pedal

3D Print and build your own MIDI foot pedal to create expression to your musical performances! Use CircuitPython and QT Py RP2040 to make a MIDI controller that you can assign to any MIDI CC! Learn Guide…

Pobrania
330
Polubienia
185
Ocena
4,5
P
Printableshaagar

Simagic Haptic Reactor Mount for VRS Pedals

Printed round face down with no supports. Throttle mount fits clutch as well. Updated with groove for power wire.

Pobrania
323
Polubienia
12
Ocena
0
P
Printablesaverageram

Modular Pedalboard

This is my first design to share. It's an effects pedalboard designed to allow for expansion so that it's just the right size for all your pedals. I'm currently using 2 A sections on my desk as a mini pedalboard. The cross pieces are the…

Pobrania
317
Polubienia
39
Ocena
5
P
Printableskolba

Dry clutch for VKB T-Rudder pedals Mk. IV

I've seen a great idea on reddit , but there was no stl available. So here is a quick implementation of it. You can see it in action here You can try without spring, but to be honest feels a bit odd. With spring, however, these are…

Pobrania
316
Polubienia
26
Ocena
0
P
Printablesflexoffset

6.35mm Guitar Pedal Potentiometer Knob

Oct 25 2025 I adjusted the design to allow for more room to add the threaded inserts, and I added a 3mm hole to make it less messy to add the M2 inserts. Here is the OnShape layout. I have created a variable table so you can really…

Pobrania
312
Polubienia
29
Ocena
5
P
PrintablesAustin Lively

P365/TLR7sub "Gaspedal" V2

“Gaspedal” thumb support to aid in recoil control! Now much more streamlined and uses more standard hardware. You can still have this printed in metal for a more robust feel, but since the threads are handled by the inserted nut you can…

Pobrania
311
Polubienia
41
Ocena
4
P
Printablesmotocoder

Pedal plates for Temple Audio templeboard guitar pedalboard

These are 3D printable equivalents of the mounting plates used with Temple Audio's pedalboard. Using some mounting tape, you attach one (or more) of these to a guitar pedal. The mounting plate alignment nubs and center screw go through…

Pobrania
309
Polubienia
40
Ocena
5
P
PrintablesSpiesel

Fanatec CSL Pedals Pedal Plate

Fanatec CSL Pedals Pedal Plate Plug and Play with Fanatec Logo and F1 Logo. Multicolor printed on Bambu X1C

Pobrania
308
Polubienia
38
Ocena
5
P
PrintablesLong

SimLab XP1 Pedal Hole Plug/Filler Sim Racing

Changelog: 2025-04-25 Added [XP1 Plug - Angled Print - Short Curved - Bolt in Lower Hole] Note this hasn't been tested yet Due to the Bolt, there has to be a big hole. The only way to make the big hole smaller is to make the plug protrude…

Pobrania
305
Polubienia
11
Ocena
0
P
PrintablesSomeDude

Thrustmaster Pedals Haptic Mount

WARNING - You need to determine if your printed mount is strong enough based on your setup and equipment. You should not only check that the mount is sturdy enough by your own standards, but you should also check the clearance of the…

Pobrania
304
Polubienia
32
Ocena
5
P
PrintablesRobin Grape

Fanatec V3 pedal wider face plate

Based on Fanatec's pedal faces that comes with the Clubsport V3 pedals. Just 25 mm wider on one side. Fits all pedals and can be mounted upside down. I use this on my throttle and brake pedals. Both with the extension on the left side of…

Pobrania
301
Polubienia
42
Ocena
4,75
P
PrintablesTwitch_Blade

Canik Rival Gas Pedal

Split the clamping piece for it and added reversed pair to the mix.

Pobrania
297
Polubienia
29
Ocena
0
P
Printablesgullymat

Playseat Challenge Pedal Pivot Reinforcement Clamp for M6 Countersunk screw

I printed mine in PLA with following settings: 0,20 - quality preset 4 Perimeters 5 Massive top and bottom layers and 25% Kubic infill

Pobrania
295
Polubienia
35
Ocena
5
P
Printablesfabiankirchen

Playseat Challenge Pedal fixation

This clip helps to keep the pedals up on a Playseat Challenge when the seat is folded.

Pobrania
293
Polubienia
42
Ocena
5
P
PrintablesRanger

Pic Rail Pistol Pedal Thumb Rest

Picatinny rail mounted, with an additional rail on it so you don't have to give up other functions. Files for both Left and Right handed. It should be a snug fit on your rail, and uses a M3 Allen-head bolt and nut through a slot on your…

Pobrania
291
Polubienia
12
Ocena
0
P
Printablesteam-sillex

Playseat Challenge Pedal Pivot Reinforcement Clamp

Use brace_playseat_normal_xxx.stl when using the default brake pedal mounting or use brace_playseat_xxx.stl in combination with the ClubSport Pedals V3 aluminum extrusion mount. More information:…

Pobrania
289
Polubienia
31
Ocena
5
P
PrintablesJohn

SIMJACK UT Brake Pedal Adapter for Simagic P-HPR (Haptic pedals Reactor)

I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…

Pobrania
286
Polubienia
12
Ocena
0
P
Printablesbubblebasti

bike stand (pedal tilt) - parametric

a light stand that is attached to one pedal and only holding the bike by tilting against the pedal. the pictured version is printed with PLA with 30% infill and 2 perimeters and up to now its working, but for long term use i recommend…

Pobrania
284
Polubienia
41
Ocena
0
P
PrintablesSepe

Pendular Rudder Pedals

Wherever you see a 28mm diameter hole and approx 8 mm deep, there goes a 6001Z ball bearing (28mm OD, 12mm ID, 8mm wide), Theres a total of 10 required. 2 on top of every crank. 2 on the side of every pedal. 2 on the back lever. every…

Pobrania
283
Polubienia
37
Ocena
5