3833 modeli
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
This is an update of my HexMaille fabric, with cleaned up edges and two different size options. Most 3D printed fabrics have a bajillion tiny vertical sections that are fragile and take forever to print. They also end up being kind of…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…
Wydruk około 4,48 €–5,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quickly designed this fairly quick print desk tidy. It has 2 parameters all around so it prints quite fast for its size (around 9 hrs with the included g-code). This is for MK3 only. As soon as you change the scale, the wall would be too…
Wydruk około 8,41 €–10,27 € nettoWstępna wycena jednego wariantu
Quick Release Buckle Clip (backpack & belt Clip)
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Now updated to an improved V2 design with additional “Compact” and “Belt” variants available! See update log for details. Summary: Extremely versatile hook and D-ring style carabiner combo, inspired by ITW GrimLoc carabiners I have been…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
structural integrity holds up enough to print in PLA can be printed at any scale, but at double size it became really hard to pull back the firing mechanism even at the regular size these pack a punch, so be careful
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this quick tolerance test to have a fast print to use once printer calibration is done. Used in combination with my 30mm test cube( https://www.prusaprinters.org/prints/39965-30mm-test-cube ) you can get a very good baseline on…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Most self-watering planter designs print in two pieces: a planter, and a self watering insert. This one is just a single print. Versions: Two versions are available: Blank and Faceted. Both function identically, however blank prints…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Use PETG or possibly ABS/ASA (PLA does not flex well enough). Designed to be printed without support. Note that one of the pieces should be reversed when connecting them.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easily printable extender for Quicko T12 microsolder and its other clones of the same size, which allows this microsolder to be elegantly operated on batteries designed for Makita or Parkside hand cordless tools, which is useful not only…
Wydruk około 2,49 €–3,05 € nettoWstępna wycena jednego wariantu
Original Printfiles here https://www.thingiverse.com/thing:3681512. There's also a build instruction. The mobile phone holder is not compatible with new iPhones which have the large stove camera lenses on the back. The holder is only…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
The footprint has been made as little as possible to avoid marks in your newly painted objects. Therefor, they are well suited for stacking multiple painted objects on a small working area. Stackable for easy storage Red (Big) :…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
I needed a quick disconnect to be able to swap my dust collector from one mobile tool to another. I could not find what I needed on PrusaPrinters, but I found one on another site that unfortunately did not fit properly. I redid it to fit…
Wydruk około 7,08 €–8,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Changelog Paracordlock 2022-07-03 v2.1 increased holding force for cords with smooth surface 2022-07-02 v2.0 initial public release Tool 2022-07-02 v0.5 initial public release Paracordlock Will fit ø2mm/1.9mm diameter paracords. Obviously…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Those small glue spreaders print in a few minutes. There are four different comb sizes: 8 teeth of 1,3 mm 8 teeth of 2 mm 6 teeth of 2 mm 9 teeth of 2 mm The good news is that you can modify the FreeCAD file to your needs. It is fully…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
I cut a lot of paper models on the Cricut Maker and I'm constantly changing between the scoring tool and the cutting tool. Putting the unused tool inside the pocket makes it hard to grab, and if it put on the desk when things are messy it…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
made my own version of ASUS quick install system for M.2 SSD's after been unable to find one anywhere. it uses the existing standoff and screw that comes with the motherboard place the clip over the standoff, screw it down with the…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A no-hardware required 3030 extrusion mount for the Articulating Raspberry Pi Camera Mount available in both vertical and horizontal orientation with print-in-place locking nuts (compatible with the Prusa i3 MK3 frame). Backstory I wanted…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Description Connector cover for PSU quick release - Original Prusa Enclosure This connector cover makes it much easier to disconnect the printer from the power supply, and it looks much better than the loose cables :-) You like my Work?…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
I designed this in PrusaSlicer using 2 pyramids. It is pretty much a vase mode part and it is stackable for easy storage. I used PETG and .4mm layer heights with a .6mm nozzle X.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
You can replace a standard quick release buckle with this one in order to have a built-in safety whistle. Can be printed at smaller sizes, but this is untested. Designed to be printed without supports. The whistle portion is based on the…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This part is a flat compass. That's right! You don't need a compass. The way this works is that you need pencils. One pencil starts at the center, and the other at wherever you want to specify your radius. To specify your radius, there is…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
All in one calibration cube, small, useful and quick to print under 25* minutes! Looking to get the most out of your 3D printer? Look no further than our calibration cube! With its precisely measured dimensions and intricate design, this…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
A must-have tool to help you conveniently pickup the various metal objects in your work space, and then easily drop them where they belong via the quick release handle (can also be used as a “transfer magnet”) . All parts are designed to…
Wydruk około 4,31 €–5,27 € nettoWstępna wycena jednego wariantu
I hate any bulk to my keys. So, I only carry around the keys that I need. This buckle acts as a quick disconnect for some of your keys. Maybe for 1 key or for a whole set. Colour code them even! These are both smaller and lighter than the…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
This remix contains ONLY the overhang test shape to allow quick prints to determine the effect of changing slicer settings on overhang performance. The PrusaSlicer “Print Settings” → “Quality” → “Extra perimeters on overhangs” setting…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena jednego wariantu
Another quick test print to test retraction and get a calibration cube in 12 minutes on a Prusa. Measured from the base of the model, the cube is 10x10x10 mm with 1 mm thick walls.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Description: Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets. Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession. Of course i could…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
A flexi model of an articulated turtles that someone made over at www.Thingiverse.com @Andrew_222426 made a very good comment with tips on printing
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Bayonet quick connect for 4 inch dust collector hoses. Slide ConnectorA into the bayonet ring, and secure the hose. The two versions of ConnectorB are for 4 inch and 2 inch hoses.
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Add a quick release to ANYTHING! Add quick release to any existing project! Just import the STLs into your slicer, align the mounts and BAM! Quick released! (Coming Soon) Print-ready models for mounting a thing to a thing with a quick…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1/4" quick release replacement plate/adapter for the Manfrotto compact action tripod
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This hanger works with any ¼" standard quick connect air hose male NPT. It holds (1) tool but can easily be modified to hold multiple in a single row. I used PLA with anywhere between 15-30% infill. Did not see any structural differences…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Ever had the urge to ditch your keychain trinkets for a moment? With this magnetic, super-secure connection, you can easily break free and reunite whenever you please! Grab two magnets (10 x 2 mm). Like these ones. Press one into each of…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
SUPER PINDA 1.5mm adjustment with 3030 MOUNT 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Hold it on the 3030 extruded frame or enclosure with its mount included. Only 20 minutes to…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update V4: Closed a small gap in the bottom part. The plug of the PSU quick-release cable is not nice to look at with the exposed cables. It looks much nicer with a housing! Fits the MK3S+ and the MK4 version oft the cable. I know, there…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
This is a small pill box/magazine with seven compartments for a week. It is sized for capsule-type pills (as seen in the photo). Since it is printed in vase mode, it is a quite quick print. The box actually has 8 sectors, but one is…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is a smaller version of my hexagon tidy which is has less compartment but it fits on the mini with the proper wall thickness. Prints relatively fast for its size :) Do not rescale. If you do so, the walls will loose its thickness and…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu
Introduction: This case features a flexible lid and base that allow for quick pull-to-open and push-to-close use, while full-length threads keep the lid securely in place. The threaded design also allows you to adjust the length to fit…
Wydruk około 8,51 €–10,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I watch Hoocho on Youtube and they…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Hi, Finally something I can contribute! Maybe someone recognises the following situation: You want to play you favorite PS5 but the TV is occupied by our significant other. Luckily you have a nice PC monitor on an arm that you can hookup…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and quick test print to tune retraction settings on your 3D-printer. Prints in 10 minutes on a Prusa. Inspired by older retraction test models, the base is only two layers high, and the cylinder in the center forces diagonal…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
A paperclip that can be printed very quickly with barely any effort, and holds paper great. Dimensions are: 45x30x2mm Recommended print material: PETG (PLA also works) Print settings: 0.15mm layer height, 15% infill, 3 perimeters, no brim.
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked the Cobra 18S quickplug base and snappable cover, but wanted to ability to customize for easy identification in the field. I often borrow from buddies, as well as lend out my own equipment, and this makes it very easy to…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed these to add a bit of variation and help make dust less noticeable. Their main advantage is that nothing needs to be disassembled. They simply slide in from the side through their opening, fitting snugly without the need for…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
You need : adhesive hook and loop tape, approx 4cmx 9cm 2.5² solid cooper wire (or paper clip)
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This is a quick release tripod adapter for Akaso action cameras. Akaso is similar to GoPro, but the “tongues” on the Akaso mounting hardware are thinner than the GoPro hardware. I modified the original model from tmorris9 on Thingiverse…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
Wydruk około 7,11 €–8,68 € nettoWstępna wycena jednego wariantu
This is a quick disconnect system for the GB Fans Leg Hose and Rubber Hose Connector . It consists of three parts: two hose plugs and the back plate. One hose plug is meant to be used with a split key ring for attaching to the uniform…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Quick release desk stand for Alley Cat's T-Beam V1.1 Case.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
this is a remix of a model on thingiverse i recommend 1mm layer height with a 0.4 mm nozzle for the cap and 2-3mm layer height for the discs petg is probably best for this OD: Bokeh kit for e.g. Canon 50 mm lens. 28 mm disks. OC: Bokeh…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Owners of the original Prusa enclosure and the Quick Release for the MK3S+ add-on have probably noticed that the LCD display has to be removed, and the cables unplugged every time the MK3S+ is removed from the enclosure. This little…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iron Holder Addon for Quicko T12 Soldering Station with Battery Pack Makita 18V, see this Model . Took the idea and basic holder from here and modiefied it for my needs. The holder is glued to the Quicko solderung station. The hot iron…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project includes three versions of the 3D-printed Manfrotto 500PLONG quick-release plate, designed for use with Manfrotto video tripod heads. These models are compatible with the 500PL system and offer options for different printer…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a case for holding half a deck of SERVD cards with a quick access, push out style card dispenser on the back for “Not Today Satan” Cards and “The Yeh Nah Card”. I designed it so that as use cards the elastic/rubber band holds less…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
The easiest way to attach, carry and fast detach keys from a lanyard or other carrying solution. It uses 5x10 round neodium magnets. I used one in each half but because the neodium magnets are so strong you may only use one magnet that…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Recommended params: size: Y 60mm infill: 20-50% (cubic) material:PetG or PLA
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: File…
Wydruk około 21,93 €–26,80 € nettoWstępna wycena jednego wariantu
Printable replica of the original Manfroto 200LT-PL quick release plate. This custom model is a precise duplicate of the original design, ensuring a seamless fit and perfect functionality on your tripod. Download and print this accurate…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction Back in the day, fly fishermen would stash their favorite flies on their hat. But flies are changing, and the rise of catch and release fishing has popularized barbless flies. Unfortunately, barbless flies fall right out of…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part is used to attach the Quick-Rack to the frame with an M5 cylinder head screw with a minimum length of 25 mm. I printed the model horizontally with carbon filament. This requires support but significantly increases the stability…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction My primary school child needed something for the class Valentine exchange. We didn't want to go with candy or the typical ‘supermarket’ boxed cards. My child is constantly searching for a bookmark, so I decided to create a…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
mBot's are nice and affordable gadgets for kids to learn programming logics with Pyhton. The Ranger model has only one problem: The battery pack wich is only accessable by unscrewing the top, relies on AA batteries, so you have to replace…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
EN: Adapter is used to connect the Quick Coupling of the Garden System G.F. BIG s.r.l. (Italy) to the standard 1-inch thread of the Garden Pump. I used Teflon tape to seal the thread and a 22.5 x 2.5 mm rubber O-ring for the quick…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
11pcs of motivational ear savers print time is about 1:10 (1hr 10minutes) I have had good results with amazon basics PETG and MG chemicals PETG. This is for 0.4mm nozzle equipped I3 MK3S printers. Print instructions Setting are included…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Growing Pot - Quick Release - Vase Mode Minimal material, maximum growth: easy-to-print growing pots in various sizes. To remove the plant, simply press the bottom slightly. My girlfriend uses these growing pots, from tiny seeds to…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Get your files, fast Store your documents, magazines, books and printbed sheets vertically with instant access. No need to open drawers or pull out magazine files. The optional stopper keeps everything at the front of deep cabinets. One…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Very minimal and frugal FDM-optimized handheld fan for quick and easy printing. It takes only 30 minutes to print and uses just ~16g of PLA filament. For a color offset on the struts, change the filament after a 0.4mm z-height. This fan…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Odolná hadicová rychlospojka z ¾" na ½" (nebo opačně) s těsněním. Model je tisknut z materiálu PETG s podpěrami a skloněn pod úhlem 45° z důvodu odolnosti tlaku uvnitř rychlospojky. Soubor 3MF obsahuje též malou podpěru pro zvednutí.…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alas, the humble tower of cards. So magnificent, yet so daunting… Mesmerizing, yet frighteningly delicate. What if there was a solution that required little skill, not glue or tape, and just a couple grams of plastic? Well, voila! With…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This cable holder utilizes a living hinge to ensure your cables do not fall off your desk. It suits all cables with a diameter less than 4 mm. iPhone chargers work perfectly, and so should other USB chargers. If your cable is thicker than…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
