Wyniki wyszukiwania: ramps

Sortowanie

205 modeli

P

Modular Robot Vacuum Door Ramps for door thresholds

Summary This modular ramp allows robotic vacuum cleaners to easily overcome door thresholds and small height differences. The individual segments can be flexibly combined to achieve different widths. Key facts For overcoming door…

Pobrania
3613
Polubienia
2285
Ocena
4,94
P
PrintableseSeL

Fingerboard Skatepark Modular - Ramps, Rail and Stairs

Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…

Pobrania
1416
Polubienia
342
Ocena
4,75
P
PrintablesHuKru

LEGO City Train Bridge with ramps

<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Had to make my own version, to get my own character on the bridge and pillars.…

Pobrania
1359
Polubienia
215
Ocena
5
P
PrintablesWolfblade

Monster Truck Ramps (Remixed and Split for 1:24 Scale)

A scaled-up version of the original, and then split and modified to allow easier printing, and for being able to join them back together. You can use as three split ramps, individual jumps or all joined together. I recommend printing with…

Pobrania
1217
Polubienia
164
Ocena
5
P
PrintablesKeeganM

Cable Ramps

Cable ramp models for desktop fun, based on the straight model found at link below by user HamAndChris https://makerworld.com/en/models/1632665-cable-protector-replica-safety-cover-step-guard Fits cables 4mm diameter or smaller. Mix and…

Pobrania
993
Polubienia
183
Ocena
5
P
PrintablesJDM Stig

HotWheels Monster truck ramps (1:64 scale)

Split the ramp into 2 for easier, faster print and choice, can be glued together if you like. Each side takes about 5 hours on low quality settings in cura with 5% Grid Infil, 4 walls and smart seam on the sharpest corner for a nice…

Pobrania
779
Polubienia
110
Ocena
4,33
P
PrintablesFrikandel321

Ramps for Custom Hot Wheels Track System

These pieces of road curve your track up or down by 40 degrees. This is ideal for building large drops for your cars you pick up a lot of speed. These parts have the same footprint as the step-250-100 when combined with a 75 mm straight…

Pobrania
658
Polubienia
128
Ocena
4
P
PrintablesSlanjonok

Sheep for slopes, ramps and flat surfaces (1-148)

Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…

Pobrania
633
Polubienia
50
Ocena
5
P
PrintablesSlanjonok

Cows for slopes, ramps and flat surfaces (1-148)

Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…

Pobrania
626
Polubienia
47
Ocena
0
P
PrintablesTheWeirdCrafter

fingerboard Ramps

4 Different ramps to play with a fingerboard!!!

Pobrania
611
Polubienia
49
Ocena
5
P
PrintablesCoolDuke

Arduino Mega - RAMPS - slider

I didn't find a slide case for the arduino mega/ramps with mounting holes so I decided to make my own :) and it fits perfectly - no need of screws or anything else. I will mount it on the outside of the 3d printer enclosure and slimply…

Pobrania
559
Polubienia
46
Ocena
5
P

Car Ramps Kit Card and single parts - 1:24 scale garage diorama accessories

Summary This is a easy-to-print 1:24 scale model of car ramps in a kit card style. The single parts are also available. Print Print with 0.2 - 0.3mm layer height. No supports are needed. Use 3 perimeters - infill not needed. Small print…

Pobrania
549
Polubienia
98
Ocena
0
P

Fast printing Case for Arduino Mega with RAMPS 1.4

I did not find a nice enclosure for a Ramps 1.4 so i made one. You need 6 M3 x 10mm screws for the enclosure and 4 M4 x 15mm screws to mount a 80mm fan. Its printable pretty fast as the enclosure is not really thick, still rigid enough…

Pobrania
482
Polubienia
27
Ocena
5

Robot Vacuum Door Ramps

Models inspired by: Robot-vacuum ramp by Dr.Peter Modular Robot Vacuum Ramp by AndersE My requirement was for door ramps but only small height (12mm). My Roborock S5max can cross the thresholds without the ramps, but with the mop bracket…

Pobrania
468
Polubienia
65
Ocena
5
P
Printablescimoalpacino

Prusa MKx and Prusa Bear RAMPS Enclosure

This enclosure is for Arduino RAMPS electronics . It is suitable for Prusa i3 frame (MK2/MK2s/MK2.5/MK3) and for Prusa Bear Upgrade (from Grégoire Saunier - check his amazing work). I have modified the Original Prusa base and lid (…

Pobrania
435
Polubienia
47
Ocena
5
P
Printablesizy120

Tech Deck Ramps

Can 3d print as many as you like. Request more ramps i should make and i will make them. I can make you custom ramps.

Pobrania
425
Polubienia
50
Ocena
0
P
PrintablesRockatilly

loading ramps Bruder MB Arocs Construction truck

ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…

Pobrania
392
Polubienia
37
Ocena
5
P
PrintablesRatchet Finesse

TRX4M Mini Crawler Flex Ramps

Designed to hold my TRX4M as a stand or to see how much flex I'm getting. The small stand I think looks better. But the taller stand you can tilt the rig on the ramp itself, as the diff catches the ridges on the ramp. Otherwise it's a…

Pobrania
378
Polubienia
61
Ocena
5
P
PrintablesRobertusMaximus

Greebles Part 4! Large Door and Ramps!

Greebles Part 4! Large Door and Ramps! In need of heavy-duty armoured Large Door and Ramps? Here you are! Designed for use with “ Way Basics Eco Stackable Storage Cube, Cubby Organizer (Tool-Free Assembly and Uniquely Crafted from…

Pobrania
373
Polubienia
86
Ocena
0
P
PrintablesPrint N Play

3D Printable RC Trailer With Removeable Ramps

There's a few included files to let you print how you want to. The fenders should just snap on, although you can glue them to make them permanent. I used an M2 screw as the axle for the wheels, it needs to be at least 10mm long if memory…

Pobrania
363
Polubienia
70
Ocena
5
P
Printablescimoalpacino

Prusa 3.9.0 for RAMPS 1.4 board

Prusa Firmware 3.9.0 (MK2S) for Arduino RAMPS 1.4 board In my github repository ( https://github.com/cimoalpacino/Prusa-Firmware/tree/MK2S_3.9.0_RAMPS ) you can find and download the source code of a working Prusa 3.9.0 firmware running…

Pobrania
349
Polubienia
22
Ocena
5
P
PrintablesEFoo

Wooden train tracks ramps & bridges (IKEA & BRIO compatible)

My kid is into ramps and bridges right now. Loved the models from MichalFanta, but had issues with its compatibility with IKEA Lilabo pieces. Ive modified these files to the correct ramp heights, and changed the connector dimensions to…

Pobrania
347
Polubienia
50
Ocena
0
P
PrintablesTristan Clark

Lego Speed champion Garage lift ramps

Car lift ramps for any 8 stud wided speed champion cars and SUVs as well as narrowed the ramps to fit the F1 racers Update 6/14/2026: added narrower rams for F1 racers and widen pillars to have a tighter fit Update 8/9/2024: created some…

Pobrania
345
Polubienia
64
Ocena
4,5
P
Printablesyzfr6drw

Ramps for Scale 1/10th RC Car Trailer

Needed ramps to go with the excellent trailer by Bedzplane https://www.thingiverse.com/thing:3775599 The ramps use M2.5 hex caps. The bracket that mounts to the trailer are M2 hex caps and some really tiny screws that i had on hand (might…

Pobrania
248
Polubienia
60
Ocena
0
P
Printablescimoalpacino

RAMPS ENCLOSURE

This is my version of Ramps enclosure. It has some features that I wanted and could find: a lot of vents for cooling 2 fans: one that blows air on top of motor drivers and one that is longitudinal to the Ramps board enough space on the…

Pobrania
233
Polubienia
13
Ocena
0
P
PrintablesWindham Graves

Cargo Container Ramps and Breakovers (Gaslands)

Come support these models over on Patreon Buy my time, Not my models. Two-wide cargo container jump ramps with added bits for Gaslands. Separate .stl for the breakover piece to fit (no glue needed) these smoothly onto Sablebadger's…

Pobrania
224
Polubienia
21
Ocena
0
P
Printablesmarcell0o0

Ramps 1.4 + RepRapDiscount Full Graphic Smart Controller

Parameters Holes 3.5mm 7.00 mm for the bolt head 6.00 mm for the female screw 5.20 mm bottom hexagonal (female screw) Fan size : 50.20 x 50.20 mm distance between holes mid point hole size 4.20mm and 6.50 for the bolt head Commutable…

Pobrania
212
Polubienia
15
Ocena
5
P
PrintablesThe Dork Side

Monster Truck Ramps

There are several ramps on here, so they won't all fit on one build plate. Just pick the one you want and print it up. I'd recommend using a brim while printing to prevent lifting

Pobrania
203
Polubienia
29
Ocena
0
P
PrintablesPetr Tér

fingerboard ramps

rampy na fingerboard

Pobrania
187
Polubienia
24
Ocena
0
P
PrintablesmangoDB

Parametric Door(threshold) Ramps - for robot vacuums

This is a parametric ramp for a robot vacuum. I reconstructed the design based on Richard Butler-Malone’s design using Fusion’s parametric model. For an 800 mm threshold and 50mm depth (10.2°, 18% incline) version, you need the following…

Pobrania
175
Polubienia
30
Ocena
0
P
PrintablesAndy Forsberg

Simple RAMPS 1.4 mount

Simple mount that holds a RAMPS 1.4, Arduino MEGA, and cooling fans. Slots in side of "case" allow for neat running of stepper motor and other wires to keep them out of the airflow path. The fan mount is designed to allow the use of…

Pobrania
158
Polubienia
13
Ocena
5
P
Printablesmarun

1:10 RC Crawlers Ramps

trapy (najazdy) skala 1:10 używać w skali pomniejszenia 1%.

Pobrania
156
Polubienia
44
Ocena
0
P
PrintablesCZkiniCZ

Ramps 1.4 enclosure V2 / case / box for ramps board

This is a new and improved version of my Ramps 1.4 enclosure. It is a little larger than the original and has some new features added. New Features: More openings for ventilation to improve airflow. Functioning reset button. Mounting…

Pobrania
150
Polubienia
16
Ocena
5
P
Printables1of40four

RAMPS 1.4 LCD enclosure

This is an enclosure I designed for my RAMPS 1.4 LCD12864 Intelligent Controller LCD.

Pobrania
148
Polubienia
12
Ocena
5
P
PrintablesTryfor

Kids/Toddlers Play Road, Ramps and Car Tracks

My kids play with toy cars of varying sizes and my mother-in-law back in the day had a big set that her kids used to love. These roads are very easy to print, I've made the connection points oversized for little people who may not have…

Pobrania
144
Polubienia
68
Ocena
3
P
PrintablesNikita Jerkov

DIN Rail Mounting Bracket for RAMPS / Arduino Mega

For my new 3D printer build, VORON Legacy, I wanted to use the RAMPS board I had laying around. There's no existing DIN rail mount brackets for Arduino Mega as far as I know, so I created a set of brackets to use with VORON Design's DIN…

Pobrania
136
Polubienia
8
Ocena
0
P
PrintablesFloatingBoater

Wheelchair / Walker ramps for carpet doorway threshold (parameterised)

Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…

Pobrania
134
Polubienia
42
Ocena
0
P
PrintablesCZkiniCZ

Ramps 1.4 enclosure / case / box for ramps board

Full enclosure for Ramps 1.4 board and my first Fusion 360 project.

Pobrania
134
Polubienia
13
Ocena
0
P
PrintablesQualith

PitchCar ramps and accessories

PitchCar ramp, special straight underpass and overpass roads. Compatible with Flounder1664 and scottkarch tracks pieces. Category: Games

Pobrania
122
Polubienia
25
Ocena
0
P
Printablesjacek

DIN-rail Mounting for Arduino Mega + RAMPS Remix with cover

Modified DIN rail bracket for arduino mega + ramps. Uses M3 nuts. Additionally I made a cover for the electronics to protect them a bit.

Pobrania
119
Polubienia
4
Ocena
0
P
PrintablesHack_n_Splice

OpenAstroTracker Minimal Controller Enclosure for Mega 2560 and Ramps 1.6

This is my custom enclosure for the OpenAstroTracker open-source motorized sky tracker for DSLR cameras. Details for this project can be found here: https://wiki.openastrotech.com/ I was looking for a compact enclosure for the minimalist…

Pobrania
112
Polubienia
14
Ocena
5
P
PrintablesV1 Engineering

Ramps 1.4 Cover

I made this to try and keep my Ramps 1.4 cool, and keep the debris from the cnc out. Wire management should be easy and provide for better cooling of the drivers. Lcd header and wires still fit. The ramps set gets snapped into place, put…

Pobrania
110
Polubienia
12
Ocena
5

Train Bridge With Ramps and Trusses - Brio Compatible

This collection of bridge pieces will take your trains to new heights. They are compatible with Brio, Ikea, and most other brands of wooden trains. Ramps Two different types of ramps are offered. The “N type” ramps are very similar to the…

Pobrania
107
Polubienia
19
Ocena
0
P
PrintablesMrPerry

Ramps for Hot wheels 1:64

stationary service ramp /lift for hot wheels type cars 1:64 scale

Pobrania
99
Polubienia
19
Ocena
0

Ramps Box

After using a Ramps Box that a friend designed (TechyG), I decided I wanted a box that would hold more components and have a bit of room to work when I needed to repair or upgrade my printer. So I set out and designed this box, loosely…

Pobrania
96
Polubienia
4
Ocena
0
P
PrintablesSimo Apell

Arduino Mega + RAMPS mount bracket

This is a mount bracket for Arduino Mega with RAMPS, but should work with other shields too. It is intended to be mounted to a 2020 extrusion, I mounted it to my Kossel underneath the print bed. M3 threads are needed to be tapped to the…

Pobrania
92
Polubienia
5
Ocena
0
P
Printables3iDeal

Universal railway bridge with ramps track for wooden train

This universal connector, to its special design, fits all popular wooden railway tracks. The sides of the railway bridge should be glued to the track. Compatibility: IKEA Lillabo BigJigs LIDL train BRIO According to the license, you can…

Pobrania
91
Polubienia
8
Ocena
4
P
PrintablesJohnny5

Ramps 1.4, Arduino MEGA, LCD adapter slide box with optional twin fan ducts

This little gem was inspired by a ton of variations of ramps boxes i found through the search function... I was looking to keep my drivers cool and keep little fingers (like those of my kids) and teeth (like those of my cat) from touching…

Pobrania
91
Polubienia
5
Ocena
0
P
Printablesdrandolph

RAMPS 1.4 Box with Smart Adaptor

The original box was nice but didn't fit the Smart Adaptor and had a few glitches. Instructions The box shrinked too much when printed in ABS so I scaled it slightly to be printed in ABS. I also noticed that a few of the connectors were…

Pobrania
85
Polubienia
3
Ocena
5
P
Printablesalbaniac

CNC/Laser Ramps+One Relay

CNC/Laser Ramps+One Relay Print instructions Category: 3D Printing Summary This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lEVV1fptQjX

Pobrania
83
Polubienia
8
Ocena
0
P
PrintablesParker

Ramps and Jumps for Finger Skateboard

I've seen lots of people using finger skateboards at my school they are always looking for stuff to skate on so I made some fun skating ramps that are easy to take with you because they are small. PLEASE LIKE THANK YOU 🙏

Pobrania
79
Polubienia
14
Ocena
0
P
PrintablesIllia Dudnyk

Ramps mount 2020

This is RAMPS mount on the aluminum extrusion 2020. Ramps mount with the possibility to install the fan 40mm. Bolt M3 x 25mm - 3 (Ramps bolt) Bolt M3 x 20mm - 2 (bolt for 11mm Fan width) Nut M3 - 5 Print Settings Printer Brand: RepRap…

Pobrania
77
Polubienia
5
Ocena
5
P
PrintablesSupraGuy

RAMPS 1.4 case with mount for 80mm fan

Case with a mount for an Arduino Mega 2560 and RAMPS 1.4 shield. Openings for wires, supports for zip ties, and a mount for an 80mm cooling fan. Also accomodates an LCD/controller edit: 02/12/2015 -- My initial upload had an older version…

Pobrania
72
Polubienia
1
Ocena
0
P
Printablesvictornpb

Graber i3 RAMPS Case

Case for Graber i3 with RAMPS board. No more exposed wires! with better thermals than running it open. Design I designed it in a way that you don't need to remove the Arduino from the printer, the so you can install it with minimal work…

Pobrania
69
Polubienia
11
Ocena
0
P
PrintablesJesusFreak

Mount for RAMPS 1.4 w/ Arduino Mega 2650 and MOSFET board.

I designed this because I don't trust the tiny MOSFETs on the RAMPs board any more than I trust the ones on the factory Anet board, but the MOSFET was hard to mount in any reliable or attractive way. This has a standoff of around 12mm to…

Pobrania
66
Polubienia
3
Ocena
0
P
PrintablesGMagician

LCD12864 Arduino RAMPS case with 30x30 fan v3

Below you will see what has been changed from original, missing parts are not modified and may be got from original. At the moment I only mounted lcd inside case, NOT YET TESTED WITH RAMPS, I'm waiting for cables extensions. 20xx-xx-xx:…

Pobrania
64
Polubienia
5
Ocena
0
P
Printablesrogerquin

Arduino + RAMPS Mount with Fan for 2020 Open Beam

A very easy to mount Bracket for the Arduino Mega board. The bracket mounts with T-Nuts to 2020 extrusion beam. The board slides onto bracket and is held in place by a retaining clip. You can also mount bracket with board installed using…

Pobrania
64
Polubienia
7
Ocena
5
P
Printablesalromh87

Prusa MKx Stock frame RAMPS Enclosure

Had some trouble figuring out what parts would fit my aluminum prusa frame so I upload here with all the parts needed and clarifying what you should print: If you have bear profiles use original version, from there v2 has removed support…

Pobrania
63
Polubienia
4
Ocena
0
P
PrintablesTOF_Tus

Fingerboard Ramps - Compatable with Tech Deck Skate Sets

A set of tech deck ramps modeled off the ones included inside Tech Deck skatepark sets. The colllection includes: 1x1 Quarter pipe vert ramp 1x1 Bank ramp 1x1 Convex ramp 1x1 Wall panel - MORE TO COME- You may find some issues with the…

Pobrania
62
Polubienia
6
Ocena
0
P
PrintablesAKG

end pieces for roomba ramps

the files as they are are 45mm wide per piece i did make a change to the screw brackets, they are twice as wide you might need some longer hardware but with this change you can scale it quite a bit on the X axis without worrying about the…

Pobrania
59
Polubienia
8
Ocena
0
P
PrintablesModestAndroid

BLV mgn12 AM8 RAMPS/Makerbot Z endstop & cover

Update (5/14/2019): v4 uploaded and IT WORKS. Now I just need to redesign the cover, as it does not fit. The Solidworks files have not been updated, they have been converted and mutilated several times now. Gross. Update (5/10/2019):…

Pobrania
58
Polubienia
4
Ocena
0
P
Printablesmrusk

RoboSports Ramps for the World Robot Olympiad (WRO)

The WRO RoboSports discipline needs ramps on the mat. This model provides 3D printed parts for a simple assembly, especially regarding a sharp edge at the front of the ramp. For assembly 3mm foam plates are required. Drawings are included…

Pobrania
56
Polubienia
3
Ocena
0
P
PrintablesMrBoub

3D Printer Electronics Enclosure (Pi, MOSFET, PSU, RAMPS, Relay)

This is a remix I made for some parts on the printer enclosure by obor. I 'modified' the LCD Bottom part from ZhilDV to have holes so you can mount it on the enclosure's frontpanel. I remixed it so it fits a 12864 RepRap Full Graphic…

Pobrania
56
Polubienia
5
Ocena
0
P
PrintablesWF3D

Hypercube Ramps Case

Ramps and Arduino Case with enough space for wiring and a 50 mm fan on the cover. Please rotate the top part when printing, so you dont need support. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: 3D…

Pobrania
56
Polubienia
6
Ocena
5
P
PrintablesJonas Burkhard

5mm T-Slot Prusa Bear RAMPS Enclosure Hinges (remix)

I Adjusted the hinges to mount Cimalpacino's Ramps enclosure to my Bearmod Scratchbuild made out of regular I-Type 20x40 T-Slot profiles. Just in case someone else cheaped out on the extrusions. Mounted mine with M4x8mm Screws.

Pobrania
54
Polubienia
3
Ocena
0
P
PrintablesTheMaxx

LowRider2 - Case for SKR or RAMPS board

This is a case designed to attach to the Y-plate on the LowRider2 CNC. It fits to the 4 screws on the upper and lower corners of the Y-plate. In this Version i wanted to integrate a bigtreetech skr1.3 board and also a dc converter as you…

Pobrania
53
Polubienia
5
Ocena
0
P
PrintablesDiogorsergio

Sayha - Wanhao i3 RAMPS Case

Decided to upgrade my Wanhao Duplicator i3 from the Melzi to the RAMPS board in order to add the BLTouch sensor. Since there wasn't that many great cases for this setup I decided to create something from scratch. The original control box…

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesSQ9MDD

RAMPS Electronics Housing. (My printer 2023 rebuild)

My version of the RAMPS electronics case. To be mounted on the Prusa i3MK2 frame. The whole thing is bolted together with M3 screws. Requires drilling two mounting holes in the frame

Pobrania
52
Polubienia
12
Ocena
5
P
Printables4noxx

Case Ramps 1.4 and Mosfet 3D Freunde

Case for RAMPS 1.4 Case for Mosfet 3D Freunde -- 2 versions, for one or two mosfet 03.05.2018 update Case Ramps (v2 is new) # update: Layout Holes 23.04.2018 update cover plates for 80mm fan 20.04.2018: update Case Ramps and Case Mosfet…

Pobrania
47
Polubienia
3
Ocena
0
P
PrintablesBash-T

Housing for Raspberry Pi bundled with Reprap RAMPS

Case for a Raspberry Pi B+ and an Arduino Mega with RAMPS. A 140mm Fan can be mounted on top to keep things cool. This thing has not yet been printed as my printer is still under construction.

Pobrania
46
Polubienia
2
Ocena
0
P
PrintablesPantstorm

TL4076/Borlee Mini01 Ramps/arduino mega mount

Simple mount to suit Jaycar TL4076/Borlee Mini01 for upgrading to Ramps board The photos show the LCD cover before I had fixed the model to include the SD card slot, this is fixed in the uploaded model.

Pobrania
45
Polubienia
5
Ocena
0
P
Printablesblaze

Recreator MK6 Fun Size RAMPS

Quick thing I threw together which allows the RAMPS v1.4 motherboard to be mounted instead of the ender 3 motherboard

Pobrania
45
Polubienia
7
Ocena
0
P

IKEA/BRIO Bridge Ramps for DUPLO

#EN Ramps for wooden railway. It is compatible with IKEA LILLABO and BRIO and maybe other brands as well. Supports are three 2x4 DUPLO bricks. Designed for 205 mm long straight track, but it may work with 240mm as well. 145 mm track seems…

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesImprimildo

20 x 20 mm extrusion RAMPS 1.4 + Arduino Mega Controler enclosure

This design was inspired in the original Voron 1.5 enclosure and in Dasaki 1.4 ramps enclosure (see link) The aim was to provide good air circulation even with fan fail and a wide open lid for facilitating maintenance. There are several…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesAakaar Lab

Ramps 1.4 Housing/enclosure for 2040 al extrusion

hello friends Welcome back to aakaar lab here is another design for ramps 1.4 housing / enclosure for 2040 extrusion

Pobrania
40
Polubienia
2
Ocena
5
P
Printablesthinkyhead

Parametric RAMPS 1.4 Enclosure with Offset Mounting

This is a parametric RAMPS enclosure with various tunable parameters. The included STLs are specifically for a RAMPS 1.4 with LCD board and a 40mm fan mounted on the interior top, with a mounting offset for a SeeMeCNC LaserCut Prusa i3…

Pobrania
39
Polubienia
4
Ocena
0
P
PrintablesLowres

Prusa i3 Simple Arduino Case RAMPS 1.4

This is a simple RAMPS 1.4 case drawn in Freecad. The top locates a 40mm Fan. The bottom is just open, so air and wires are free to exit. The primary problem I was trying to solve was the RAMPS fan causing a draft across the printing bed.…

Pobrania
39
Polubienia
0
Ocena
0
P
PrintablesHF1

Customizable Ergonomic Ramps for Apple Magic Keyboard

Apple's Magic Keyboard is very poorly-designed ergonomically, so if you are forced to use one, you may need to improve its attitude. That's the purpose of this simple model, which contains both; STL files for the ramps that work for me,…

Pobrania
38
Polubienia
8
Ocena
0
P
PrintablesDavid

Bůža MK1.6 Upgrade (MK1 RAMPS)

Obsolete, no assembly guide available, but maybe you find some of the parts interesting. Reversed RAMPS cover opening: opens up to the left side. Cooling fan. Cool 2004 LCD cover with easier removal/insertion of the SD card. modified Bear…

Pobrania
37
Polubienia
8
Ocena
0
P
PrintablesJoe Naab

Finger Board Ramps

This model shouldn't need anything to print well.

Pobrania
36
Polubienia
6
Ocena
0
P
PrintablesKnurbine

Screwdriver Drawer Storage Ramps

These simple ramps have holes and slots to fit screwdrivers in a toolbox drawer, while still allowing easy removal. When stacked side-by-side, there is additional room below to store small items transversely. To keep them from moving…

Pobrania
34
Polubienia
8
Ocena
0
P
Printablesdrandolph

Fabscan RAMPS Edition

I originally ordered the shield but it never arrived (I balme customs) and after seeing the price tag on a new scanner I decided to forge ahead anyways. So this arduino sketch works with an off the shelf RAMPS 1.4 board and now you can…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesDabomb

Display holder Ramps 1.4 display modul 128×64

Display holder Ramps 1.4 display modul 128×64

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesZombie Feynman

RAMPS and MOSFET box for AM8-style printers

A Voronoi-pattern box for RAMPS and two MOSFETs, mountable on an AM8 or similar printer using 2040 extrusions. The Arduino and MOSFETS can be mounted using M3x10 screws. A structure in the top-right corner can be used for cable…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesYazkili

micromake d1 lcd cover (Controller Display Reprap Ramps 1.4 2004 LCD)

Just print it... Category: 3D Printer Accessories

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesPaprikodlak

Lidl Playtive Space Station train set ramps and rail fitting

These are parts remodelled from the original

Pobrania
30
Polubienia
2
Ocena
0
P
Printableskjoh

RAMPS 50mm clip on cooling fan mount Remix

Found the hole spacing didn't work for me (duh, what I had was a 60mm fan). The hole centres are 50mm. Designed this for top mount. Your fan may fit underneath, who knows? Make sure you've got clearance for that rat's nest of wires. Edit:…

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesVontragg

DIY - Stairs and Ramps - WH40k

A number of different stairs and ramp options. The ramps are designed to accept either a cardboard or plastic plane as the ramp, only the supporting braces are provided. The additional accents for Ramp1 can be found in my PLF Tips and…

Pobrania
29
Polubienia
6
Ocena
0
P
PrintablesWoodenDavid

Customizable Threshold Ramps

I want to roll my office chair over the threshold between the office and the next room. Threshold ramps are commercially available, but I wanted a custom size. In Thingiverse's customizer you can set the height of the ramp, the length of…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesMacNite

Ramps Holder for Aluminium Extrusion Profile

A quick design I made to mount my Ramps 1.4 to my printer. I just removed the notch for the PSU bracket. The fan mount seen in the picture is this one: http://www.thingiverse.com/thing:806125 Print instructions Category: 3D Printer Parts…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesAndy Forsberg

Simple Re-Arm Smoothieboard + RAMPS 1.4 mount

This is a re-mix of my Simple RAMPS 1.4 mount to be compatible with the new Re-Arm Smoothieboard. This mount is beefed up from the original RAMPS 1.4 mount to fix some of the original breaking issues I had. Simple mount that holds a RAMPS…

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesStougaard print

ramps mount for 2020

hi i needed a ramps with arduino mount for 2020 but didnt like what i could find so i made this instead. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 20% Filament:…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesNotCrazy_Man

Bins And Ramps

Just adds some models to use when playing with the Mini-Skiddi NOTE: THE TOLERANCES ARE BAD I NEED TO FIX THEM BUT THEY WORK

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesBash-T

RAMPS 1.5.7 mounting cage

This is just a mounting base to attach an Arduino stacked with a RAMPS 1.5.7 board to a case. The 5 holes that holds the RAMPS in place are M3 and has to be threaded. The 4 holes for attaching the cage to anything is for putting M4 screws…

Pobrania
26
Polubienia
1
Ocena
0
P

Interlocking Screwdriver Drawer Storage Ramps

These are simple ramps to assist with storing screwdrivers in a toolbox drawer.

Pobrania
25
Polubienia
3
Ocena
5
P
Printablessmeshoulam

Prusa MK3 Electronics case to RAMPS frame mounting plate

A flat piece allowing for the electronics case of a MK3 to be mounted to any frame with holes for a RAMPS board. Only needs four M3 Screws. Uses the hinges from the stock Prusa MK3. I had an old i3 clone frame from Ooznest here in the UK,…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesNikki81

re-arm for ramps gerber files

***Update 22/12/17 Ive added the bill of materials gerber files for the re-arm for ramps pcb i had problems finding a fab house the uses Diptrace files so i have converted them to gerber files Here is the link to the original files:…

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesPiercet

Top Cover for Lulzbot A0-100 RAMPS 1.4 Cover

This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesDabomb

Electronic holder for Arduino mega & Ramps 1,6

Electronic holder for Arduino mega2560 & Ramps 1,6

Pobrania
23
Polubienia
1
Ocena
0
P
Printablespullen15

NEW! TRX4M TRAILER FLAT BED MOD now with ramps and improved deck

i printed with pla+ and with the ramp facing up

Pobrania
23
Polubienia
7
Ocena
0