305 modeli
The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena jednego wariantu
This print elegantly relocates the Ender 3 extruder from behind the x-axis gantry to the front. This makes the extruder easier to access as well as keeping the bowden tube fully in front of the z frame. This way, the bowden tube doesn't…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
more compact form / rigid 15%infil+ the better 3 layers 0.2 lay flat and add supports on the back of the screen holes
If you've ever thought of upgrading your printer to dual Z drive, you've probably run into the problem that the power supply is in a very bad place. This simple little model will help you move the power supply under the heated bed. It…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…
Sidewinder X1 Bed Side Cable Chain Relocation Preparing to put my Sidewinder inside an enclosure I was not happy with the space taken up at the back of the printer by the bed wiring and needed a solution to fix the kinking from the stock…
This is a bracket that centers the filament sensor when running a dual spool setup. features a clip on each side to retain your cut filament. Relocates filament sensor to be centered between spools Clips to top of printer. I use this for…
A Mod for relocating the Endstop-Y in Voron 2.4. You do not loose an Y print range. You need 3 x M3 heatinserts, 2 longer M3 screws for attaching the A motor. The bumper distance is adjustable.
I called it HIT FM Hold It Tight Filament Mount :) ... again am running out of names . Its it is annoying to have so much filament wasted with the flimzy mounted filament sensor all the way to the top , I never liked it, it looks like it…
Simple Bracket to relocate your X-Gantry Cable. Solve problem with cable being in the way. Allows better travel of the cable. You will need to reroute existing cable from underneath the printer to use this bracket. I have included several…
Update 02.07.2024 - V3 Model with no blinkers. I saw that there were a couple of request regarding a model with no blinkers, new model added ;) Update 28.06.2024 - V3 model released! Updated the design so its easier to install the lid.…
Few people have said that the fit is snug, I would suggest scaling everything to 102% should make it a bit less snug. Currently i'm working 72hr weeks and don't have the time to get around to fixing this. DISCLAIMER: You will have to trim…
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
Description: My Voron 2.4 uses a Nighthawk SB toolhead board with an upper umbilical mount at the vent location. Due to the cable thickness and exit direction from the board, the loop from the board to the lower strain relief mount either…
Hi everyone! I designed a Cover for my Ender 3 V3 SE and redesigned a fan relocation bracket found on printables. Both of them replace the original extruder/hotend housing for a lighter and sleeker design. You also need Vent Ring found…
UPDATE: I have replaced the profiles with ones containing four build plates. The following versions are included: V1.0 - classic version with feeder holders that fit snugly to the housing curves, PC4-M6 V1.1 - classic version with feeder…
Remix from Kraftwork47 (https://www.thingiverse.com/thing:6248552) This mount relocates the filament runout sensor from the back of the machine to the right side. It offsets the sensor 45mm to line up with a feeder/dryer or side spool. A…
MASSIVE VISUAL UPGRADE FOR ENDER 3 PRINTERS POWERSUPPLY RELOCATION UNDER THE BED (IN TESTING) (Is not usable for PRO and V2) SUPPORT ME BY PAYPAL!!!: https://paypal.me/zltncsk If you woul like to see new upgrades for 3D printers, and…
New fan shroud I designed to allow for the best airflow to the nozzle and be adjustable for volcano/non volcano setups. This allows for the use of the existing lower screw that used to be to hold the fan in place and now be used as a…
This is an updated version V1.2 Previous V1.1: https://www.thingiverse.com/thing:4820250 V1.2 fixes: Larger holes for easier screw insertion, Now compatible with camera mounting solutions like these:…
I didn't like the filament runout sensor location, leaves too much unusable filament, so I created a way to mount it on the hotend. I included left and right guide mounts, so you can move the spool to either side of the printer if you…
The original spool holder extends the printers footprint to where it won't fit in most benches or will take up most of the space. There are solutions to relocate over the printer but this adds additional weight to the top of the printer…
Didn't want the DD extruder to hit the mount at max height and the fit is also more snug than the original model.
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Wykorzystałem oryginalny model obudowy…
Visual upgrade for Ender 3 Pro Printers Is not usable for Ender 3 and not tested on Ender 3 V2 (feel free to try it out for the V2) Support me by covering a coffee to get/keep me going! Venmo: @dannyjvj SUMMARY: After upgrading my PSU fan…
BONUS MOD FOR THE TINKERERS: I have added a bigger compression ring for the Tangle Detection. The bigger ring increases tension required for the Tangle Detection to trip in return allowing more friction to be permitted through the system.…
I received the updated spools for the AD5x and they work fantastic except that they raise the center of the spool upwards so some of my cardboard spools would rub the IFS with channel 1 and 4 spools. I made this adapter bracket to lift…
I like the simplicity of this model and the reviews of the fitment were correct. This model fits into the top of the Elegoo Centauri Carbon with almost a snap fit. I removed the rear rim so the top plate can be slid backward for venting.…
This kit removes the bulky spool holder handing off the side of the Anycubic Kobra Plus and relocates it opposite the LCD screen. I have my printer on a sliding tray under my workbench, so I couldn't use the top-mounted spool holders. An…
A simple mount for relocation of the runout sensor on an Elegoo Centauri Carbon printer. The example in the photo is PETG. I recommend Elegoo Rapid PETG , particularly when printing functional printer parts on the Centauri Carbon. PETG…
WARNING: You will lose the small amount of adjustability that Minsekt's endstop piece has (it can only be mounted fully forward).…
For installation, you have to remove the filament sensor cable from the aluminum extrusion. Pop off the top brace by removing the six screws on top, then remove the cable from the top brace. I removed the gantry from the base to pull out…
extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them
Add a power switch to the front of your Creality K1 or K1C, if you don't feeling like reaching to the back of the machine…. i have no idea what screen the K1 max uses, but it might be the same screen. Does not use factory installed switch…
ATTENTION: because of the cable length only being just long enough. arranging your cable like this will remove about 6cm of your build volume height, so your total volume would be 32x32x34 V2: Adjusted the fit so they hold together…
About the relocation; I got the idea from https://www.thingiverse.com/thing:3830464 . Moving the electronics out of the cube structure gets me one step closer to an enclosed printer. Also I will soon receive the new 32-bit 4.2.7 ARM-based…
If you're going with CANBUS and you want to relocate your Y endstop without printing new idlers.
This is a model I made after moving my printer to my current work station since the OEM filament spool holder was is too tall. This model functions to relocate the filament spool holder onto the Z-axis frame left corner lowering the…
Moves the Filament sensor to the top, to work in conjunction with a top mounted spool. if you remove the wire for the sensor from the harness, there is enough wire to run up the side and to the sensor without needing an extension. print…
Simple holder for laying the X-gantry cable. Solves the problem of the cable being in the way. Enables better cable routing. This modifaction is compatible with the other modifactions I have provided for the Kobra 2 Max.
NOTE 3MF is Required in this model as negative parts are used Pla or ASA or ABS, it is a little flimsy as PLA but it does work, one in photos is in pla This will work on EITHER the left panel screws or the rear panel Screws 2 M3 Nuts need…
With the option to place a second spool (thanks @Anthony ) at top of my Ender 3 S1 Plus, i also wanted to relocate the filament sensor in addition with the ability to fix the not-used filament. Thus, i first printed the already remixed…
I really liked the unibody style of riser and so I printed AP's remix of a K1 riser, but I found the distance between the corners was a bit too big resulting in the legs not fitting into the four corners of the printer. This has a…
This mod moves the light bar out to the front of the printer instead of directly above the X Gantry, reducing the shadows created by the original light bar placement. In the photos, my LED Diffuser mod is pictured, which can be found…
This fits my MLOK cage and MLok rails I designed for my radios. It will relocate a digirig via mlok nuts. Links MLok Nuts - https://www.amazon.com/dp/B0B845WY3D?ref=fed_asin_title&th=1 Related Models Icom IC-2350H Cage -…
This mod is relocating stock spool holder to the right side, lowering printer height and mass center, which leads to significantly reducing print vibrations. Stock location of spool holder is shifting printer mass center toward rear top…
Remixed from ‘Ender 3 Pro - PSU Offset Mount (dual z-axis)’ by emtrax to work with the stock Ender 3 PSU by Cheng Liang This remix retools emtrax’s super slick, ultra functional Meanwell PSU mount to work with the stock Ender 3 power…
After dual-Z upgrade for my Ender-3 (non-pro), I wanted to move the PSU. Tried few existing designs, but all had some downfalls, so remixed this to make is secure. https://www.thingiverse.com/thing:3304804 - This slides into extrusions…
The Ender 3 v3 and v3+ have 2 problems with the filament system : The supply tube can be bent when homing → could cause the filament to break The filament runout sensor moves up and down → often causes the filament to slide off the roll,…
PSU Relocation Bracket and Relay Enclosure for Ender 3 Printers Modeled to accommodate the stock Cheng Liang P360W24v Power Supply This part is designed to accomplish the following on an Ender 3: Provide clearance for dual-Z-axis mods…
Max 5 ESC plate and Radio relocation box. Base Plate Technical Drawing PDF https://www.dropbox.com/s/n8oeqlaa6dvb8fq/X-Maxx%20Max5%20Base%20Plate%20Technical%20Drawing.pdf?dl=0 This is for relocating the radio receiver in the Traxxas…
This is a practical remix of the original tube relocation system for the Anycubic Kobra 3. It improves the installation process by allowing the mouth to clip directly onto the upper rod of the printer—no need to open the frame or unscrew…
I wasn't happy with the brackets that came with my dual Z stepper upgrade kit - so I designed some new ones that are stronger and also have slots in so you can adjust the height of the power supply. You can even lower the power supply so…
This is a rear-mount for the power supply (PSU) of an Ender 3 Pro. It's compatible with dual z-axis upgrades. It requires 2-4 M5x12 screws, an M4x8 screw with T-nut, 6 M3x4 screws, and the power plug from original PSU casing with it's…
This is s simple relocation mod for the Trident and only the Trident, the 2.4 does not have the bumper. I disliked the mods that needed a new A/B drive. This basically swaps the Y endstop and moves it from the X beam to the bumper. I used…
Two brackets that allow you to mount your Ender 3 Pro PSU inside of the printer's base. This will not fit on the regular Ender 3 , as it uses a different PSU. Bolts that you will need: 4pcs M5x16 to screw into 40x40 aluminum extrusions (I…
Download: https://makerworld.com/de/models/2738012-crossbar-relocation-tensioner-zero-g-mercury-one#profileId-3035756 Crossbar Relocation mit Tensioner für Zero G mercury one es wird ein 370mm Alu 2020 vslot profil benötigt.
add PG7 threads for Rear Umbilical mount relocation umbilical hole to match motor A mount
This fits my MLOK cage I designed for my radio. It will relocate a SO-239 coax connection. Links Related Models Icom IC-2350H Cage - https://www.printables.com/model/1246431-icom-ic-2350h-cage Relocation Bracket BNC + Audio -…
This is a simple remix to enable lateral mounting (as opposed to vertical with the original mount) of your electronics box. I'll attempt to load photos of the mount in action, once my Mercury One is completed. Initial test fit was very…
I wanted to move the stock fan to the side, for better access and view of the hot end, allowing inspection of first layers etc. Uses the stock duct, which is attached to the 4010 fan, as so far I'm happy with the cooling. Will be…
This is an adapter for relocating the stock Ender 5 LCD. I wanted to move the LCD more to the middle of the printer to reduce the printer's overall size, so I designed this adapter to make LCD relocation as easy as possible while reusing…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Wykorzystałem oryginalny model obudowy…
Attention: A Variant of This Model Is Now Available With A Belt Tensioner. Y-Axis Motor Relocation Bracket for large NEMA-17 motors on the Ender 3 v1 Modeled to accommodate the vertically oriented 2040 extrusion and v-roller movement of a…
This is a mounting bracket I created to relocate the extruder on the Ender 6 from the side to the top. I used two M3 T slot nuts to move the wiring harness more to the right. Then I used two M4 nuts, four M4x20 screws and two M4 T slot…
Few adjustments to already existing PSU relocation model. Requires 2 m3 inserts.
Y-Axis Motor Relocation Bracket & Tensioner for large NEMA-17 motors on the Ender 3 v1 Modeled to accommodate the vertically oriented 2040 extrusion and v-roller movement of a stock, original Ender 3. This part is designed to accomplish…
All the bits I used to relocate the psu to the old school position. Now it's super quiet and runs much cooler. The fan comes on for about 15 seconds once every few minutes as opposed to running constantly in the stock position. Front…
I wanted to relocate the stock fan to have better access for maintenance. I tried many mods and designed new ones. Including TPU ducts, because every available duct deformed on the first layer of a big PETG print. Also any restriction or…
i recommend using supports for the hole for the outlet
This fits my MLOK cage I designed for my radio. It will relocate a pair of Anderson Powerpole connectors. Related Models Icom IC-2350H Cage - https://www.printables.com/model/1246431-icom-ic-2350h-cage MLok Relocation Bracket BNC -…
Actually just did some minor changes from the original model. Add 4 lane filament hub and enlarge the screw holes to M3 This is a untested model ! So feel free to command. I'll try to correct asap. Update: It fits smoothly.
I needed a screen mount for the left side of the printer specific to my setup. Material: PLA 210C Infill 10% Nozzle: 0.4 Perimeters: 4 Supports: None Can be printed face down successfully without supports. Factory M3 screws for screen…
I needed a better solution for the dust colleciton on my Makita miter saw. First and foremost I wanted to move the connection point from the top, sliding portion of the saw down to the bottom and I also needed the ability to connect a…
I designed this simple mount for mounting some new shocks I got that were a little too long. Also works as a lift kit. -can be also used to lower your stock shock to give the truck a little lift.
Bracket to relocate filament runout sensor to work with filament relocator . Will have to extend wiring by a few inches. Gromet Plug for old spool holder Alternative top hat
I created this adapter in order to install a 4020 part cooling fan on my Microswiss NG extruder. This will also relocate the fan to above the height of the extruder, allowing for the ingress of cooler air for the initial layers. I have an…
Here is my under PSU underbed mount/case. It's perfect if you've upgraded to Dual Z. It's a little hard to mount but it works! Needed few more iteretion to make it perfect You can also use any meanwell PSU Silencer. FOR PSU POWER IN Use…
Replacement brackets to raise the front bumper of SCX24 Bronco. Out of the box, there's an ugly gap from the bumper to the body. These brackets are a direct replacement to the factory brackets. Raising the bumper reduces the gap and helps…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection. Links BNC Jacks - https://www.amazon.com/dp/B08139D4XS?ref=fed_asin_title Related Models Icom IC-2350H Cage -…
Because you have nothing better to do than mess around with stuff that was fine where it was…
For Elegoo Centauri Carbon This is a bracket to relocate the filament runout sensor in a vertical position. No hardware needed: it uses all the original bolts. Print with a support for the "hook" that goes inside the ECC panel. In…
So I wanted to put on a larger motor and a dampener for the y and x-axis on my Ender 3. Turns out the motor was far too big and when I went to make a whole new bracket I had an idea: just flip the Y-axis bracket vertically and mount that…
Using this parts you can move the box in which the electronics are located to the back of the printer.
This bracket allows you to relocate the filament runout sensor closer to the tool head. You will need to extend the wires to make this fit.
Print with the power emblem facing the build plate and the switch housing facing down. No supports needed. Easy print and mod, need approximately 30" of 18ga wire (15" for each line), 3 female spade connectors and 1 male. UPDATED Jan 2023…
ELEGOO Mini Heater RELOCATION due to it using up the UV Lid Extraction Hole I use an extraction fan system set up on the preformed UV Lid hole and rear hole plate supplied on the Elegoo Saturn series resin printers. The issue with using…
Assembly (from original with some additions): Solder wires to the endstop. Use the two outer pins, don't connect anything to the inner one. If you are unsure about this, check the V2.4/Trident manual, there are instructions for the wiring…
This is a mod that relocates the power supply of the Ender-3 Neo to the bottom of the printer and flipped the mainboard 180 degrees. The changes are meant for more room on the right side of the printer for a Dual-Z setup and easier…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection and audio speaker cable. Links Audio Jacks - https://www.amazon.com/dp/B0C9MDDLNG?ref=fed_asin_title BNC Jacks -…
Bracket Used to Center the Filament runout sensor of the Ender 3 S1 lineup . Features 2 holes for extra Secure mounting using the 2 extra screws provided with the printer. Also has 2 holes to secure loose bits of filament.
Using the parts from the original Thing, tftbase and tft24, this can be used in place of tft1 to keep the original screen orientation. No firmware changes needed.
I recently installed the sliding riser with PTFE tube relocation , but I wasn’t happy with how the tube would push back out of the enclosure. It rattled against the back of the machine and sometimes even hit the wall behind the printer…
It fits with the original screws. The print settings can be rough, like 0.3mm layer height and 15% infill
reuse the rear spool holder for the CFS filament buffer
I had some problems with underextrusion when using Ender 6 with top cover and speeds > 120 mm/s. I had to move extruder inside printer to have shorter bowden tube. This is a angled bracket to prevent bowden making sharp turns and…
