5322 modeli
Rock Remote Holder Keep your space tidy with this rock-style remote holder , a decorative organizer that blends perfectly into your home while keeping your essentials within reach. 🪨 Designed to look like a natural stone, this model hides…
Wydruk około 9,04 €–11,04 € nettoWstępna wycena jednego wariantu
Station to hold upright remotes for entertainment set. 14cmx8.5cm footprint This one holds 7 Remotes, of different sizes (only width and depth, height doesn't matter). One large (Logitech Harmony), 2 Medium (Sony TV and Yamaha AV…
Wydruk około 12,71 €–15,53 € nettoWstępna wycena jednego wariantu
Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
This is essentially a slight remix of the ‘Original Siri Remote Holder with AirTag’ by makanadumlao on Thingiverse: https://www.thingiverse.com/thing:4851515 . I removed the lanyard holes and made it slightly more ‘no support’ friendly. I…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
This box is designed to enclose an ESPSomfy-RTS remote, an ESP32 based project allowing you to control Somfy shades over WiFi or via HomeAssistant (see YouTube video ). The case can also be used for any radio project consisting of an…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
I made this Gyroid look organizing box for TV remotes. Recommended 3D printer's settings: Material: PLA Resolution: 150um Infill: 15-30% Feel free to make your own Gyroid TV remote box! Print instructions Ready to print for i3 MK3/S gcode…
Wydruk około 7,39 €–9,04 € nettoWstępna wycena jednego wariantu
I designed a super simple remote Holder for my Ikea Malm bed. It was designed for a Amazon Fire TV Remote and a Samsung TV Remote. Feel free to remix it or to change it to your needs ( to your remotes ). In the picture it was printed with…
Wydruk około 7,20 €–8,80 € nettoWstępna wycena jednego wariantu
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
A DJI's Mavic air 2 remote neck strap holder
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
This Roku remote holder is designed to be hung from a hook or screwed into the wall with standard drywall screws. The hole in the front was designed to use your thumb to slide the remote out if it is being hung and cut aways at the top…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
Marksman-H Training Remote from Star Wars A New Hope. .obj file is an uncut high poly version. .3mf files slice the orb in half and add connectors for easy printing and assembly. gcode – see .3mf + includes organic supports. Christmas…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena jednego wariantu
A pair of 3 x 15mm countersunk screws are used, to mount it to the wall
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
My Quadlock casing for iPhone is too fat for DJI Mavic Air 2 remote to hold. So I made an adapter - a plate with Quadlock adapther that hold my phone. My first project with Fusion 360 and first print of something that I designed by myself.
Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed in Fusion 360 as a project to actually learn how to use it. My first iteration was way too short, so I figured out how to grab just the right faces and pull everything up in the Z-axis. I discovered fillets, so I incorporated a…
Wydruk około 17,13 €–20,94 € nettoWstępna wycena jednego wariantu
Updated parametric holder of egil's model. Features added: mounting screw holes can be switch off for mounting with double sided tape the corners of the cut-out section can be cut off (or not) to make inserting the remote easier the…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
here is a Darth Vader remote holder, recomend scaling 175%
Wydruk około 9,93 €–12,13 € nettoWstępna wycena jednego wariantu
This is an easy-to-print wall mount bracket for your car visor mounted garage door remote. I've tested it with a Chamberlain 953ESTD, but the visor clip seems to be quite standard. Design features The backing plate ensures that you will…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Wandhalterung Remote Fire TV Sprachfernbedienung Pro. Sie unterscheidet sich leider von der Form zur “normalen” Fernbedienung. Wert wurde auf abgerundete Kanten und tief sitzende Schrauben gelegt um ein verkratzen der Fernbedienung zu…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
I printed it with a 15% infill. No supports or brim needed.
Wydruk około 6,62 €–8,09 € nettoWstępna wycena jednego wariantu
Nothing much to say here, easy and simple print, deos it's job. Enjoy!
Wydruk około 1,52 €–1,85 € nettoWstępna wycena jednego wariantu
A quick and easy to print stand for my Hisense smart Roku TV's remote that holds it up at 15 degrees off vertical.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Chromecast remote control case / extender
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Automatic Nozzle Cleaner This solution is for the Prusa MK-series printers, that don't really have an out-of-print area, most solutions will either collide during bed-leveling or can't coop with the PINDA-sensor. If your printer…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Overview Hi everyone! This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
I needed a box to hold my remote, so I ripped this out. No support are needed. Pursa orange,
Wydruk około 4,68 €–5,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN : My girlfriend and me gonna search a tissue box with 2 compartments for our TV remote but never find the desired one, I made it myself this model to store different remote standing up to have an easiest way to catch it and to limit…
Wydruk około 33,93 €–41,47 € nettoWstępna wycena jednego wariantu
I tried to make a robot that everyone can enjoy. 3D Data, How to Make, and Code are open to the public. You can put it together with parts that cost around 7000 Japanese yen (70 US dollars at ¥100/$, excluding PLA filament). The power…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena jednego wariantu
I do use an enforced support for the center part of the shell only. (see pictures)
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
This is a stand for the Apple TV remote. There is a version with or without the apple logo. There is also a hollow version that will require support and the logo insert that could be done in an alternate colour, like black with a silver…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This Remote Control Renault VAB 6x6 scale 1/10 is made of 109 parts printed on my i3 MK3. The biggest parts (front and back are about the size of the print area. The weight of material (ABS/PLA) is above 1Kg. The size of the truck is…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Most filament saving rgb-led remote holder you will probably find. Deisgned to be printed with 0.2mm Layerheight and 0.4mm Nozzle . Also made a variation for 0.3mm but this one uses slightly more filament (3.6g vs. 3.08g) - on the other…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have been looking for an easy way to organize my "small" remotes. Since I didn't find anything useful, I created and printed my own remote control holder in Fusion 360. It was important to me that the holders can be plugged into each…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Clip-on holder for Samsung TV remote controller compatible with favourite IKEA Lack tables. Of course, you can use this holder for other purposes. Holder is (based on experience of other users in makes) also compatible with newer version…
Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of KIA car key remote replacement, added symbols to buttons. Added gcode is ready for 2 colours without MMU. Printed in PETG.
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
here is a TV remote holder
Wydruk około 11,26 €–13,77 € nettoWstępna wycena jednego wariantu
This holder is designed to securely hold the remote for your Govee LED light strip. My model was H619C and had a pill shaped remote. This is the remote most of their strips use nowadays, but you may want to check before printing this as…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with PETG, Layer Height 0.15 oriented as in the .3mf file Remove the support carefully, the locking pins are easy to break. If your printer is well tuned it will work without brim. Would work with PLA as well, but it is more…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This single cupholder / bowl holder / remote holder / phone holder keeps everything you need within reach while chilling on the couch. Also works with Mugs! I printed in PLA & PETG with 3 perimeters, support cubic infill. If you decrease…
Wydruk około 13,38 €–16,35 € nettoWstępna wycena jednego wariantu
All credit to https://www.printables.com/model/152938-fire-tv-remote-holder I just cut out a larger window with Tinkercad. A wall mountable holder for the Fire TV™ remote. It should be compatible with multiple versions of the Fire TV™…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Clip-on IKEA Lack holder for LG TV remote controler.
Wydruk około 3,11 €–3,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a slim and subtle remote shell for the Apple TV 4K remote control. With the Apple TV remotes being annoying smooth and symmetric it can be hard to tell the orientation without looking, and slide around more than my liking so…
Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu
Even though every dimension and the shape have been changed, the concept is a remix of @ Mikolas Zuza 's Gyroid Pen Holder which has been around for long enough that I thought it was time for a reminder of the potential of “Modelling”…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I designed a super simple standing remote Holder for my Ikea Malm bed. It was designed for a Amazon Fire TV Remote and a Samsung TV Remote. Feel free to remix it or to change it to your needs ( to your remotes ). In the picture it was…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
Le rack est en 3 parties qui sont à coller ensemble. L:175 x l:110 Ht 135 mm 4 compartiments de: 35x106, 30x106, 106x25, 106x25 PLA couche 0,2 pas de support N'oubliez pas de mettre un petit ❤ si vous avez aimé, merci
Wydruk około 1,93 €–2,35 € nettoWstępna wycena jednego wariantu
This is a simple holder for an AppleTV remote, meant to be attached to a stationary bicycle with zip-ties. Prints quickly, and has a tight fit. The buttons can still be pressed while it's in the holder. Assembly: Take 2 zip-ties. Poke…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
Wydruk około 6,32 €–7,73 € nettoWstępna wycena jednego wariantu
Simple wall mount Remote Holder for Lexman or 40x86x7mm remote. 2 design: one for m3 holes another for thick double side tape.
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Easy PLA print - all buttons are accessible while in the holders, remotes are easily removable, installs with two small screws. Parametric OpenSCAD file (FanRemoteHolder.scad) means you can measure any vaguely similar remote & insert the…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Support de télécommande tournant sur 360° Ce projet comporte 3 fichiers. Base.3mf Entretoise.3mf Bac.3mf le fichier support télécommande complet , regroupe tous les fichiers. Disposition sur la plaque d'impression: Paramètres d'impression…
Wydruk około 7,40 €–9,04 € nettoWstępna wycena jednego wariantu
This desk stand for your Pico has a wide base to give it stability, and uses the mounting slot on the remote to lock into place. There's a lot of chamfering for easy handling. Update 2024-01-29: I've added a new style that is slightly…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Replacement case for CAME TOPD2R remote
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Simple RGB LED remote control holder Full Access Nail hole to attach to the wall or anything else Looks really nice Fits Perfectly Print Layer Height Filament Intfill Brim Supports 0.2 or 0.15 PLA or PETG 0 % Not Needed NO
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
I remixed this file https://www.thingiverse.com/thing:5586101 so it could fit 2 remotes of various thickness. I printed it upside down on the bed without support and got a beautiful, flawless finish.
Wydruk około 4,93 €–6,02 € nettoWstępna wycena jednego wariantu
This model is inspired by H3li0's TV remote stand. I needed something different to fit the remotes that I have and I also wanted to make it parametric so people could enter in the size of their remote and print out the appropriate insert.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Wall mount basket iPhone 12 ProMax and remote Sber TV Корзина для настенного монтажа iPhone 12 ProMax и пульта дистанционного управления СберТВ.
Wydruk około 2,04 €–2,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Automatic Nozzle Cleaner If you have some out-of-print area on your print-bed then a very simple automatic Nozzle Cleaner solution is presented here for you. An out-of-print area, is an area, which normally will not be visited by…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Holder for 3 Remote Controllers, 2 small and 2 bigger remotes (Chromecast with Google TV, AC unit and TV/Receiver) :)
Wydruk około 15,26 €–18,65 € nettoWstępna wycena jednego wariantu
These Holders are for standart RGB-LED-Strip Remotes (94x52x8 mm) and another one that I use in the kitchen (90x40x8 mm). The approach was pretty straight forward: Minimum filament use For better appearence I chose to design them to be…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I decided to make this because i was sick of not finding the remote controls i have made this with 3 perimeters and 15% infill and in PLA i found that printing it on its side and with organic supports worked fine for me this actually…
Wydruk około 10,40 €–12,71 € nettoWstępna wycena jednego wariantu
Support de télécommande pour canapé à imprimer avec support sur le plateau uniquement
Wydruk około 8,63 €–10,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description: This holder is for storing your apple tv remote securely in a drawer or on a wall. You can also print it with glow filament. That way, you can put the remote control away in the bedroom, even in the dark. Recommended print…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Look, a remote intended to stay on your nightstand should stand on its end, not lay on its side like a lazy, space-hogging TV remote. So, an end cap that turns the BedJet remote into one that stands on its end. Like it should always have…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an exact replica of the GoPro issues metal Remote key. I made this just incase someone may have lost the original metal key. It fits perfectly and functions the same.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Make your own This is a remote controller holder with holes to save material. The advantage of 3D printing is that you can make something exclusive to yourself. So, you can remix this model and make it in the perfect size for your remote…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you like me and always use the timer on your aircon unit? Are you also always loosing the remote and spending a lot of time trying to find where you placed it? Well, here is something you will love! This remote holder has an opening…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
(pour le français, voir plus bas) Wall support for 2 dometic remote controllers. Max remote controllers size is 56x18mm. Use two 4mm screws to fix the support. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
Minimal and tight fitting Teufel Boomster remote holder with only 3 wall lines. Print with supports as shown in the picture. Glue to the Boomster using double sided tape.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Can be printed in PLA as well, no raft and no support needed
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wall mounted Vizio TV remote holder. There is an inset on the wall side to place a command strip so the holder fits against the wall. I printed this at .4 layer height, 80mm/s, 10% infill. This holder is 90mm high by 60mm wide.…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
A simple Jarolift Remote mount where you can still use the controls. To mount it, you can use 2 small countersunk head screws
Wydruk około 2,55 €–3,11 € nettoWstępna wycena jednego wariantu
Made for the Daikin Air Con remote, could work with other brands. I printed it in pla and used some simple rail hangers to hang it. No supports needed. Printed with MK4 with input shaper and generic PLA in about an hour.
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Impression en PLA 0.3mm Draft
Wydruk około 6,13 €–7,49 € nettoWstępna wycena jednego wariantu
NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Added Airtag slot to the banana. I do not have an AirTag, I made this for a friend. I am not sure if it will fit, although, I know the remote does.
Wydruk około 7,97 €–9,75 € nettoWstępna wycena jednego wariantu
Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PRUSAMENT PETG
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I forgot to move the seams so it looks a little ugly when you get up close. You can't see them unless you are laying on the floor so I decided to leave it alone. Printed vertically. Good for most of these types of remotes:
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
What This sleeve allows you to attach an Apple AirTag to the remote of the 2022 version of Samsung's The Frame TV, model LS03B. I use the term "attach" loosely. It just slides on, so it's a temporary attachment. The fit is comfortable. It…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
I wanted to get this Lutron remote off of my desk so I designed this holder to that I can store and use it on the SKÅDIS board I have next to me. Hope you find it useful if you need it. The tolerances are pretty tight so that the buttons…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
The Tiger Stripe Remote Holder is printed in two pieces: a boxbase and insert that may be printed in a different color. The unit has thick walls to prevent warping and rounded edges for gentle treatment of your remote controls. Optional…
Wydruk około 6,81 €–8,32 € nettoWstępna wycena jednego wariantu
Non c'è molto da dire... per montarlo serve una vite M4x30 MATERIALE: ECO-SMART PRINTOLOGIST
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HAL 9000 Apple TV remote holder. Who does not remember these legendary sentences? Dave Bowman: Open the pod bay doors, HAL. HAL: I'm sorry, Dave. I'm afraid I can't do that. If you do not, watch this movie: “ 2001 - A space odyssey “ from…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Light remote holder clip, ease in and out. Infill to get klean pocket. Use Transparent Nano Adhesive Tape to mount on walls or furniture.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a Remix of https://www.printables.com/de/model/196829-ikea-malm-holder-for-remote-controll Printed with PLA. Supports needed.
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
Very simple wall mount for the remote AC200 Meliconi. Here is the remote: https://amzn.eu/d/5c9Hx9s I never found one for this model of remote, and I create this with 2 holes for M4 screws.
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
Chromecast Remote Wall Mount A simple wall-mounted holder for your Chromecast remote (2020+ model). Keeps your remote easy to reach and off the table — clean and functional. Mount it using either adhesive or screws (holes included in the…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Tired of having to swap 3V coin cell batteries on your Segway X2/i2 remote? This design converts the Segway InfoKey to a 1200mAh lipo battery with 500mA USB-C and QI wiress charging. Takes 1h15m to print on the MK4 with InputShaping The…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed one to hold my projector remote, so the contest came to the right time, here my version. It is a rather simple print, the only “challenge” is, that it is slim and high, so without brim, it might topple over. I always use some…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
Just a simple “perfect fit” remote control holder for RCS311. inner height: 18mm width-middle: 43mm width-bottom: ~38mm
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
This stand allows you to keep your remote in an upright position so that it takes up less space on your night/bedside table. Print it in the colour of your choice to match your decor. Prusament gives the best results. The 3mf and gcode…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for remote (type in photo)
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a vertical hold stand for the remote that came with my old 40" 720p Samsung LCD TV (LNT4042HX/XAA). Based on a web search, this remote probably also came with the following TV models: LNT3253HX/XAC BN59-00604A PL42C91HPX/STR…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
BabyPod is a remote control to Baby Buddy to help new parents track feedings, changes, tummy times, and more. Why is it called “BabyPod?” Because it connects to Baby Buddy and has an old school click wheel like an iPod, so it's easy to…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is likely a more common remote format for Ikea remotes, but I wasn't able to find something nice for mounting the remote under my desk. It is designed for two coutnersunk screws, but VHB tape will work great as well thanks to the…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Relieve the childhood delight (or experience it for the time) of a roly-poly toy that doubles a remote holder for the First Generation Siri Remote. Knock it over, rough it up…it always bounces right back with a smile on it's face. P.S. I…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Someone asked me to print a LED-Remote Holder, the designs I found were "too simple" for me, so I created this "curvy" one with flextures. Printed the one in the pictures in white PET-G. You can use doublesided adhesive or two 3mm…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
