287 modeli
Introduction I love this design. It's great, but I had some issues I needed to address. Thank you to GunplaMark for making my life easy by publishing the STEP files. I've made a number of changes from the original design: The original…
Wydruk około 4,43 €–5,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After Christmas I needed a tool or winding up the cables of the fairy lights.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix between three different styles of Spool Auto Rewinders. There are multiple options for the side brackets depending on your needs/preference. Changes: Updated Shana 's sidebracket.stl to support the slightly larger axle in…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
for English, see below Intro Mein Präsziser Filamentumspuler war ursprünglich für meine Prusameter Spulen gedacht. Mit diesen zusätzlichen Teilen könnt ihr auch andere Spulen mit ca 32 Windungen pro Lage und einem Minimal Innendruchmesser…
Wydruk około 9,35 €–11,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
New Firmware V3.00 released!!! For details see Update. Neu Firmware V3.00 veröffentlich!!! Details unter Update. Introduction / Einführung Smart Rewinder is premium upgrade for MMU3. It's a sensor equipped, microcontroller-managed ative…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
Introducing a newly designed filament rewinder with virtually endless expansion possibilities . Main Features: Modular design for easy customization Sturdy and compact construction Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm…
NOTE:2/1/23 Sorry took so long to get back to this. After a lot of testing I have come to the conclusion that a NEMA 23 stepper with an external driver is the way to go to get the torque needed to wind a full spool reliably. So, I am…
Geeignet für kleine Mengen zum umspulen. Es lassen sich alle gängigen Größen montieren auf der Antriebswelle. Das Testgewinde ist gedacht für die Richtige Scalierung vom Gewinde. Ich musse x und y auf 98% setzen im Slicer. Z darf…
It needs to be printed on some material that can withstand up to 70 degrees Celsius without deforming (it will be in a dryer box that reaches that temperature). I have used PETG I've added a new GIF showing the assembly process. I think…
This project is meant to replace the buffer unit for the mmu3 by rewinding filament instead. The printed parts for this are as follows(I printed all the parts in PETG, no supports needed): Amount to Print File Name Comments 4 All Bracket…
Intended to replace your MMU filament buffer. Inspired by this design https://www.printables.com/model/168-universal-auto-rewind-spool-holder-mm but fixes 3 problems I had with it: Plastic spring lost elasticity over time Inability to…
Used parts for shafts: 2x Threaded rod M5 length 170mm 3x Self-locking nuts M5 for crank and shafts 5x M5 nut with integrated washer, which are heated and sealed into the bushings and crank 6x M5 nut ring (d12/w3) or nuts with reduced…
Model I love the work that the diplomator has done to create the awesome filament spool rewinder. Awesome Filament Spool Rewinder - Upgraded I wanted a 3d printed mount that could easily be adopted for this project. The pieces of this…
There are three versions, 60mm, 75mm and 90mm widths. The struts came from the Integrated Auto-Rewinder Spool Holder for Repbox. I've removed the logo and added magnets to the feet to keep them stationary. A big thank you goes to…
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
Adapter to connect your spool to a screwdriver. It needs a 6mm HEX bit. Print settings : Printer model : Creality K1C Filament : Creality PLA Layer height : 0.2mm Infill density : 15% Infill pattern : Gyroid Supports : No Time to print :…
Tactical Paracord Dispenser/Rewinder. NOW YOU CAN GO BACK IF YOU PULL TOO MUCH. Assembly on gif image. You'll need: 9x M4x30 DIN912 screws 1x M4x20 (or 18mm) 1x M4x5 (optional if you want to have something on end of crank - I did) You'll…
Don't use a brim. It will prevent the axle from fitting easily through the bearing in the auto-rewinder. There is not a ton holding the print to the bed but I haven't had any problems with the part popping off during printing on the Prusa…
Original model was working wonderfully, but just on almost empty (light) spools. Reason was I used ASA as material, which is much softer than PLA, under the weight of the full spool the axle deformed a bit, and instead of resting on the…
This is an add-on for the Versatile Filament Rewinder. Print using the default slicer settings, ideally in PETG for durability. https://www.printables.com/model/1414113-versatile-filament-rewinder
I tried printing the original bearings and couldn't get them to spin freely. So I found these bearings and adjusted them to the same size. I might try testing with the smaller bearings too, since these work so well and the design seems to…
The spool winder for a cordless screwdriver is fully printable and perfect for easy winding. The model has been tested with Prusament, Aurapol, and Bambu Lab spools. To ensure high shaft strength, it is recommended to print it…
UPDATE: lots of Users hate me for that very Bad design, i am so SORRY for my really Bad design. -i am a beginner in CAD and really a NOOB, sorry for that →hopefully there are some Professionals who can make a better design out of my bad…
No change to the original model instructions.
YES, again next Filament Respooler , BUT…. like always, I dont like complicated things, i used an idea from others , but i did printable almost without suports. and also more stronger. My print from others was weak, lot of suports and lot…
Created a spool adapter for my Sunlu spools using the SCAD file located in the downloads.
This a remix of VincentGroenhuis's Integrated Auto Rewinder, sized to fit jterranella's RepRewind stand so five of them can fit inside the RepBox 2. The scad is the work of VincentGroenhuis, I merely changed the dimensions to fit the…
Add-on to Versatile Filament rewinder. Print using default settings, preferably in PETG. Use normal supports for gear and ratchet part. https://www.printables.com/model/1414113-versatile-filament-rewinder
When I used it, some uncommon problems appeared, so I had to do it myself. My spool width is 55mm, diameter is 200mm. Before https://youtube.com/shorts/FT6cEvOHu64?feature=share After https://youtube.com/shorts/YBxHFMK-KBE?feature=share…
Update the Main Spool Spindle to fit different spools.
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
I already printed a bunch of the The Ultimate Cereal Container Filament Drybox - Official Remix (2025) bases. I just want to add the rewinding feature to what I already have. Update V2: lower mounting slightly. See pictured 200mm spool;…
Modified Manual Axis 45mm for steel insert file and made it solid.
Stand for this rewinder: https://www.printables.com/model/678300 Prints without supports, clicks on. To assemble print 2x of “left_leg” and 4x of “side_rib”
I got a bunch of (Free) tiny 250gr spools from chinese scammers but since those won't work with most auto-filament-feed systems I needed a way to re-spool the filament on regular 1kg spools. I don't need it to be tidy only to be on spools…
I was looking for a way to rewind the filament in the dry box without opening the box, then I came up with the idea of installing magnets in the roller and that's how this model came out, I'm very satisfied with the result, I've tried…
This centering disc works with eSUN spools and works just like the original centering discs, but with an spool opening diameter of ~54mm. Parametric F360 model file included and STEP for other software. Happy Spooling!
This Stand-Alone Auto-Rewinder allows my Auto-Rewinder for Ultimate Filament Drybox design to be used without a drybox OR with a drybox other than the cereal container used with @GunplaMark 's The Ultimate Cereal Container Filament Drybox…
Drill spool rewinder diameter of hexagon part is 8mm spool hole diameter 70-26mm Assembly insert 2 little cilinders inside one half of screw part glue 2 screw parts together put hexagon part to part with hexagon hole Print settings 0,1mm…
This add-on to the Versatile Filament Rewinder powers the filament respooling. Print preferably in PETG with default settings. Use normal supports for gear and ratchet. I bought the motor/controller/power supply set from AliExpress (see…
Improved remix of the original spool rewinder.
See also https://www.printables.com/model/792166-winchrack_type2-v2-for-ercf-or-tradrack-buffer (for some reason printables wouldn't allow me to make this the original) I was impressed by this elegant and simple rewinder design, and…
This is a remix of the spring used in VincentGroenhuis' awesome Universal Auto-Rewind Spool Holder. I use 5 of these on my Prusa i3 mk3s MMU2.0 setup as a replacement for the prusa fiber buffer. They reliably rewind fiber onto the spools…
I have been working on this remix about two months in order to make printing faster and easier and I went through a couple conceptual iterations and I have settled on a good solution for faster printing including much less support! I have…
PETG 4/5/5/25% (Wall/Top/Buttom/Infill) All parts are aligned and can be printed without support. For the CC-RS if you want to build with MMU2. But can also be used on any other printer with ERCF or Palette 2/3 Pro.…
BOM（I didn't actually buy these items） M3x10 Flat head screws(Within 15 mm) x16 https://s.click.aliexpress.com/e/_olr2kJl 608z bearings x16 https://s.click.aliexpress.com/e/_oCpbWDp badge reel x4 https://s.click.aliexpress.com/e/_oFCAgZp…
A body for the Spool Auto Rewinder without lightening holes to aid ease of printing.
This Drum , Drum Cap , and Spring Assembly is part of my Auto-Rewinder for Ultimate Filament Drybox mashup. It is published as a separate model only because of different licensing for the original model. Stretched drum, drum cap, and…
This is a plug-in feeder for the Versatile Filament Rewinder. It is designed for 45mm spool widths, but should work for 50mm spools as well. I suggest to print it in PETG. Support is only needed for the case. Please note that the gears…
To lower the angle and reduce the tension on the spool, I've raised the length of the slider aligner pivot by 10 mm. To reduce the friction I use a Capricorn's PTFE tube on the slider aligner arm. I've adapted the tension arm to use a…
This is an add-on for the Versatile Filament Rewinder. Print using the default slicer settings, ideally in PETG for durability. You need 2 608 bearings. https://www.printables.com/model/1414113-versatile-filament-rewinder
Hey! Since i always had problems mounting the holders over the tight 20mm axles/tubes, i redesigned them with a mounting option/screw hole and easier to slide over the 20mm tubes. After mounting them, i didn't even need to mount them on…
This add-on is designed for the Versatile Filament Rewinder. It is installed in front of the donor spool holder to improve filament flow and add controlled resistance to the rewinder, resulting in more consistent layering on the receiving…
Spool Rewinder on the drill
Polydryer drybox adapter bracket for Stronger Compact Spool Auto-Rewinder by Rans A modified axle with slits on both ends and an axle bracket that allows for the spool rewinder to slide nicely onto the drybox's existing spool holder…
For the Automatic filament Rewinder design Warpster has made his base out of wood. Since I do not have a CNC machine I wanted to make this base out of plastic. But none of my printers have a printbed large enough to print the base that is…
This is yet another filament dry box, but it has a magnetic spool rewinder mechanism. I wanted a way to rewind the filament back onto the spool without having to open the container and introducing moisture. I also wanted it to be as…
Simple device to reload 35mm films. For example you need to test new camera/lens/film and don't want to shoot all 36 exposures. You can make 3 rolls of 11 exposures each, out of 36mm cassete. It's especially usable if your film is not…
Modifications for axle fit and function. Added spacer to hold sled axle bearing in place and another for the worm gear.
I had similar issues with the rack jamming so I modified the file to reduce the end teeth by about half and then put a chamfer on all of the teeth. It now runs smooth through the full range of movement.
The 5 spool adapter works well but blocks access to the silica gel boxes. This solves that problem. Other models I looked at sat under the adapter A frames and are therefore a little fiddly to get out, this solves that problem by sitting…
I was having some issues with assembly, as Mark's version of the rewinder shaft allowed the spring to move too much for my clumsy hands. It would pop out, or slide around, and generally made it difficult for me to easily assemble. I had…
This is the main body that has been shortened to 216.5mm so will print on the Creality K1 bed that has a build volume of 220x220mm. I tried 219, 218, 217 mm but all caused negative x movements, so 216.5 is what worked for me. You will…
This Saddle replaces the rollers in @Extrutim 's Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled filament due to MMU ejection…
I can never seem to get a decent enough grip on the clutch adjustment dial to actually use it so I threw this together in Tinkercad and, after a couple revisions to get the sizing just right, it works like a charm. Tip: you can use the…
Převíječ špulek filamentu na vrtačku nebo aku.Pro spojení použita závitová tyč M8,podložky a samojistná matice. Pro odvíjení špulky postačí držák na tiskárně Print instructions Vytištěno z PET-G s výplní 60%
Hey! I did a remix off the spool holders because i don't liked the system off the flying ptfe tubes. And i like the respool feature. I like it all tight and orginazed, i did it with PC4 M10 because you can let the tube come out at the…
this is a wirewinder for small wire antennas or all other things that you want to wind up...
A Spool Holder Remix to support ColorFabb 2.2kg Spools
I remixed Badger's Center Roller holder to use ManelTo's Spool Auto-Rewinder for use in GunplaMark's Ultimate Cereal Container Filament Drybox. So a remix to combine other mixes… which would be more mixed than a remix… or just mixed up?…
This design will fit spool with center holes from 80mm down to 36mm. Uses 2 6200 series bearings instead of 4 like the original. The idler end bearing holder is attached by a M5x25mm cap or counter sunk screw. And for the driven side use…
This is a Drill attachment to rewind spools.
I created very slightly changed version of Crossbeam to be able to be used with 20mm tubes, which are used in (Un)Original Prusa Drybox.
English: Silica gel box and filament plates for auto rewinder adapter. Print lid with no bottom and top layers and preferred infill (in my case grid with 30% infill). Filament plates can be printed with multicolor. print Settings: layer…
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
PLA/PETG/ABS all I have is a bobbin from SUNLU, maybe this could be useful for other bobbins too if you need a small bobbin for a little filament: https://www.printables.com/model/692879-mini-bobbin-filament
The filament storage system by GunplaMark in 2026 is great. To me, the best part is the rewinder, which is a simplified version of a pre-existing rewinder. Now it uses metal as opposed to plastic springs. If you are like me, you may not…
Material doesn't matter much. I printed this with eSun PETG at 235C, bed at 80C, .2mm layer, 20% infill, .8mm wall and top and bottom.
Additional spool for sewing machine automatic rewinder. Usefull tool when you have only big overlock spools but need the small ones.
The holes for the motor are slotted to allow depth adjustment. The hole at the rear of the winder main body are slotted to allow for different lengths of the main body. Parts required: 4x M3x8 Bolts 4x M3 Nuts 6x M3x4 Inserts See the file…
Was having an issue with the little slot for the spring snapping when under load so I reinforced it a little.
Rewinder tools to assist with (re)winding spools. Designed to print flat with no supports and no cleanup required. Base cone fits snugly onto the threaded shaft. Hex end allows using a drill to help wind the spool. Small rewinder can fit…
Dopo aver pubblicato la MMU modificata, mi sono dedicato al buffer per i filamenti. L'idea del piano inclinato, a mio giudizio è la più sicura e durevole a meno che non cambi il magnetismo terrestre, questa idea dovrebbe funzionare a…
This is a free-standing auto-rewinder stand designed for use with the Prusa MMU2S multi-material unit. I designed this rewinder stand to meet the following criteria: Must accommodate a spool 90mm wide by 200mm diameter, which is the size…
This is an auto-rewinder stand designed for use with the Prusa MMU2S multi-material unit. I designed this rewinder stand to meet the following criteria: Must accommodate a spool 90mm wide by 200mm diameter, which is the size of a spool of…
This is a Filament rewinder for Prusa rolls. Its made to be powered by an low rpm electric motor. The main idea is to be able to use the rest of a filament roll, connect both ends together and “make” a new roll. I mainly designed it since…
Prevents the spool from slipping on the substrate, print with TPU, 3 perimeters and tick Irregular surface/ outer walls. Position of the join : random Just cover the rewind with the sock The model is for the standard 70mm rewind support…
This project is a spool core that enables the user to rewind the excess filament that is hanging out of a cereal dry box once they are done using that filament and unload it from their printer. It also doubles as a desiccant holder spool…
The part that engages the film to rewind it on my Kodak Ektar H35N broke. This is a simple printable replacement. Print orientation I printed mine laying flat, because I was worried about the part being weak because of the layer line weak…
Steven’s excellent extended rewinder shaft solved my problem with my spools falling out of the bracket on my filament dry boxes. The only problem was his part was too long for my needs, so I used slicer tricks to trim it to length. Slicer…
TLDR: This mod provides better frontal filament exit for the autorewinder system EDIT: 26/03/2025 - Added the SLIM version of the F1 and F2 beams with *5 exits I remix the original F1 and F2 beams adding *5 PC4-M10 holes aligned with the…
Some different versions of parts for an existing rewinder. The green is the original, the brown is the updated version. I hate supports.
While building the Automatic Filament Rewinder, I only had IEC 320 C14 sockets with the screws on the sides and I wanted everything related to mains voltage. With this case, the PSU will be standing on its side and the whole assembly is…
I made it for the 16-Cup Rubbermaid such that the cup does not need any modifications. Cup link: https://www.amazon.ca/gp/product/B00BEUDWI2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 The hub adjust continuously from 38mm to 79mm, the…
Simple spool rewinder that fits either M4 or M6 Bolt and a nut, so it can be attached to drill.
