P
Printablesargoroots
Box for Soldering Iron TS80P and accessories
Glue required. Also some magnets to better hold cover, but not 100% needed.
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
- Pobrania
- 30
- Polubienia
- 9
- Ocena
- 0
Wyniki wyszukiwania: s80
Liczymy pasujące modele…
P
PrintablesPjotrStrog
Rugged Multipart Pinecil/TS100/TS80 Case (V2)
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
- Pobrania
- 26 389
- Polubienia
- 8079
- Ocena
- 4,95
P
PrintablesAikano9
Double Layer Rugged Multipart Pinecil/TS100/TS80 Case (V2)
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
- Pobrania
- 2805
- Polubienia
- 541
- Ocena
- 5
P
Printablesinjectx
Improved Pinecil, TS100, TS101, TS80 stand
Saw different versions of the stand and decided to combine a few ideas and create a new version: Reinforced Stability: Thickened the stand's design, ensuring it remains securely in place. Effortless Removal: Added grip makes detaching the…
- Pobrania
- 1089
- Polubienia
- 150
- Ocena
- 5
P
PrintablesRemcoGoy
Larger Bottom Insert for Rugged TS100/Pinecil/TS80 Case
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
- Pobrania
- 1055
- Polubienia
- 235
- Ocena
- 4,88
P
PrintablesFab Lab León
Omnifixo - Field box for TS80P Soldering Iron
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
- Pobrania
- 495
- Polubienia
- 127
- Ocena
- 5
P
Printablesedmogeor
Pinecil, TS100, TS101, TS80 & TS80p Case - Improved Stand (M3 Heat-set Insert, Finger Pull, Thickened)
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
- Pobrania
- 459
- Polubienia
- 44
- Ocena
- 5
P
PrintablesZombie Batman
Flux Paste Box for Rugged Multipart Pinecil/TS100/TS80 Case
A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…
- Pobrania
- 453
- Polubienia
- 92
- Ocena
- 5
P
Printablessuit
Corsair HS80 / HS80 Max Hinge Buckle Repair
This component is a small plastic hinge buckle plate that fits at the headband-to-earcup joint of the Corsair HS80 and HS80 Max headsets. It provides essential mechanical support. The original part is prone to cracking, but this…
- Pobrania
- 430
- Polubienia
- 24
- Ocena
- 5
P
PrintablesspTim
TStation - TS80p Case & Soldering Station
The TS80p is the soldering iron with the best price-performance ratio. Although it is just USB-C powered with a max power consumption of. 30W, it outperforms much higher powered irons. This is achieved by a clever design where the heat is…
- Pobrania
- 422
- Polubienia
- 279
- Ocena
- 4,89
P
PrintablesLndnny
Rugged Multipart TS100/TS80 Large Lid with Miniware Logo
This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.
- Pobrania
- 414
- Polubienia
- 61
- Ocena
- 5
P
Printablescrhou1
Screw-Top Flux Jar for Rugged Pinecil/TS100/TS80 Case (V2)
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
- Pobrania
- 325
- Polubienia
- 38
- Ocena
- 5
P
PrintablesTpp4
Multicolor TS100, TS101, TS80, TS80P, & Pinecil Cutout Case
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
- Pobrania
- 314
- Polubienia
- 60
- Ocena
- 5
P
PrintablesChar
Double Layer Lid for Rugged Multipart Pinecil/TS100/TS80 Case (V2)
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
- Pobrania
- 306
- Polubienia
- 58
- Ocena
- 0
P
Printablesdaclasen
Gridfinity TS80/TS80p and Tip Holder Boxes
Those 3x1 Gridfinity Boxes will either hold your TS80 or TS80p Soldering Iron and a Tip or just two extra Tips. Note that I redesigned the base of the Boxes to save some material. You should be able to print that without Support even if…
- Pobrania
- 294
- Polubienia
- 50
- Ocena
- 4,83
P
PrintablesMeister Edel
Featherboard for Festool TKS80 (replaceable)
Heyho here I have a featherboard for your Festool TKS80. It will slide into the existing profile of the angle guide. There are different options: small_thin = small featherboard with 2 perimeter feathers small_big = small featherboard…
- Pobrania
- 250
- Polubienia
- 76
- Ocena
- 5
P
Printablestjb1
Double Layer Rugged Multipart Pinecil/TS100/TS80 Case - Easy Reach
Changed the parts around latches to make them easier to reach
- Pobrania
- 249
- Polubienia
- 41
- Ocena
- 5
P
PrintablesAlvaro Alvarez
Blank Insert for Rugged Multipart Pinecil/TS100/TS80 Case
I decided to create a blank insert to store different things in the Rugged Multipart Pinecil/TS100/TS80 Case. I tested it with @aikano9's remix which allows me to have a multipurpose space on a second level.…
- Pobrania
- 244
- Polubienia
- 23
- Ocena
- 5
P
Printablesj0shi
Gridfinity Soldering Stack, includes Omnifixo, TS80p, SS-02
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
- Pobrania
- 238
- Polubienia
- 83
- Ocena
- 5
P
PrintablesTheMagiciaN
Pinecil, TS100, TS101, TS80 Stand for Storage Box with thicker stem
I printed the rugged case for my TS100 (https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and noticed, that the stand for the soldering iron would not snap securely into the top of the case. Also the…
- Pobrania
- 237
- Polubienia
- 33
- Ocena
- 5
P
PrintablesnoLieBowtie
Volvo V70 S60 S80 850 Wheel Center Cap
This center cap was designed to fit a 1998 Volvo v70, but it may also work for other models close in age, such as the 850, S60 and S80 models. The tabs have a tendency to break off because of the layer lines, but I've had pretty good luck…
- Pobrania
- 232
- Polubienia
- 15
- Ocena
- 5
P
PrintablesPlok
Pinecil, TS100, TS101, TS80 & TS80p Thickened Stand
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
- Pobrania
- 231
- Polubienia
- 35
- Ocena
- 0
P
PrintablesThatConorGuy
Volvo Keychain - MODERN LOGO - VOLVO P3, S60, S80, S90, XC40, XC60, XC90
Just a simple VOLVO keychain I made for my S60 keys. Its the exact length as the P3 key and takes vary little space and filament. Infill: 25% (I used Hexagon infill pattern with 3 walls) Material: ANY (I used SUNLU PLA Matte and it has…
- Pobrania
- 205
- Polubienia
- 21
- Ocena
- 5
P
PrintablesKytor
Pinecil, TS100, TS101, TS80 & TS80P Stand (Square Nut)
Holder uses 608 bearing, M3 Square Nut and Bolt.
- Pobrania
- 193
- Polubienia
- 25
- Ocena
- 0
P
Printablesf
Secure Bearing Improved (again) Pinecil, TS100, TS101, TS80 stand
Securely holding the bearing @@ omgwowbbq
- Pobrania
- 175
- Polubienia
- 14
- Ocena
- 1
P
PrintablesWilfred
TS80 Soldering iron stand
A stand to place your TS80 soldering iron. I will be very stable as is, but you can weigh it down with some heavy stuff stuck to the underside. I used a sheet of thick lead. The .stl doesn't represent the correct bed orientation. Sponge:…
- Pobrania
- 161
- Polubienia
- 24
- Ocena
- 0
P
Printablesbibbosc
Modified cylinders & Yarn carrier stem suitable for E6000/S80 Needles for CSM by JeepingJohnny
First of all a big thank you to JeepingJohnny and all the predecessors in making these great models. With these models you can use E6000/S80 needles which are much easier to get in Europe. I had some issues with the rounded groove design…
- Pobrania
- 140
- Polubienia
- 31
- Ocena
- 5
P
PrintablesDan Erbert
Pinecil Compact Inserts for Double Layer Rugged Multipart Pinecil/TS100/TS80 Case (V2)
Tolerances of your printer will play big role. In worst case remake the inside part of the model with bracket mounts for the pinecil, make it little bit tighter. Spare height for the solder roll is 2cm. Mine is only 16mm high so I have a…
- Pobrania
- 140
- Polubienia
- 18
- Ocena
- 5
P
PrintablesAustinSaintAubin
TS80 Soldering Iron Case & Tip Holder
Case for TS80 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Also have a look at my Fume Extractor & TS100 Case UPDATE v29: Fixes based on input from @4nthonylin . Moved soldering…
- Pobrania
- 135
- Polubienia
- 10
- Ocena
- 5
P
PrintablesMakerMeik
Stand for Miniware TS80P Soldering Iron
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
- Pobrania
- 131
- Polubienia
- 26
- Ocena
- 5
P
Printablesvrsn3ptoh
TRENDnet TEG-S80g (V3 and V4) 10 Inch Rack Mount
Print settings: 0.2mm layer height 3+ bottom layers and 4+ top layers 4 perimeters w/ 0.6mm nozzle or 6 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA should work fine but I'm not sure about the latch flexibility Specific build…
- Pobrania
- 131
- Polubienia
- 14
- Ocena
- 0
P
Printablestjb1
Rugged Multipart Pinecil/TS100/TS80 Case - Flux Pen/Solder Wick Insert
Holds a .625" diameter x 5.2" long flux pen and a 1.8" diameter solder wick, both easy to get on Amazon.
- Pobrania
- 131
- Polubienia
- 34
- Ocena
- 5
P
Printablespb-tec
TS80 mini soldering iron case
Just for the TS80 base and two tips. In my point of view the smallest possible case. Protects them very well because there is at least 2mm of material all around. Size: Length 105.6mm / With 50mm / High 19mm If the case is taff to open,…
- Pobrania
- 124
- Polubienia
- 16
- Ocena
- 4,67
P
Printablesossifragus
TS80 Inserts for Rugged Multipart Soldering Iron Case
These inserts allow use of the TS80 soldering iron and tips in the Rugged Multipart Pinecil/TS100 Case by PjotrStrog . These inserts are made from components in that design and TS100, Pinecil, TS80 & TS80p Case with options, Stand, Solder…
- Pobrania
- 124
- Polubienia
- 39
- Ocena
- 5
P
PrintablesD!nu
Heat Inserts mod for Rugged TS80p Case
If you are a fan of heat inserts you can find many use for them ;) Like I did for this excellent “rugged” version of a case for my TS80p. If you don't like the heatinserts, please find the original here:…
- Pobrania
- 124
- Polubienia
- 25
- Ocena
- 0
P
PrintablesCMF
TS80 Soldering Iron Stand
Stand for the TS80 with a solder spool holder and space for a tip cleaner. The iron clips securely into the stand but can be easily removed. No hot part of the iron comes into contact with the printed part.
- Pobrania
- 118
- Polubienia
- 27
- Ocena
- 5
P
Printableselzxr
Pinecil/TS100/TS80 Gridfinity case tile
Onshape link: https://cad.onshape.com/documents/669d8ab3ba28c9b4524ab2e6/w/aef33c5d4f0e49661ce8afa3/e/09eb626dace08d21ae3c6973?renderMode=0&uiState=670aa99a73e99d0f1216ec99 Based on…
- Pobrania
- 114
- Polubienia
- 23
- Ocena
- 5
P
PrintablesLeJa
Insert for Rugged Multipart Pinecil/TS100/TS80 Case (V2)
This is an insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2) by PjotrStrog. I modified the original TS100_Pinecil Top Large A insert to fit 4 tips instead of 2. For this I needed to make the cleaning wool compartment smaller,…
- Pobrania
- 110
- Polubienia
- 12
- Ocena
- 0
P
Printableshaafoo
TS80p Soldering Iron Case and Soldering Station
A case and and soldering station for the Miniware TS80p soldering iron. The case snugly fits the soldering iron handle along with three tips. The soldering station accommodates a spool of solder, brass wool tip cleaner, USB-C power cord…
- Pobrania
- 105
- Polubienia
- 65
- Ocena
- 4
P
PrintablesProXinouss
Pinecil/TS100/TS80 Case Insert for Heat Insert Nut Kit
This is a custom insert for @PjotrStrog’s Rugged Multipart Pinecil/TS100/TS80 Case (V2) . It’s designed specifically to fit the TS/T65 Heat Insert Nut Kit for TS101/Pinecil soldering irons. The insert design is based on @irwtdvoys’s Tip…
- Pobrania
- 103
- Polubienia
- 16
- Ocena
- 0
P
PrintablesSimon
TS80P Soldering Iron Carrying Case
This case is inspired by this Thingiverse Model . The case was a bit to small for me and had some minor issues. So I modelled my own :) The icon for the Soldering Iron was made by Bakunetsu Kaito and can be found here . — Parts For…
- Pobrania
- 103
- Polubienia
- 26
- Ocena
- 4,5
P
PrintablesChodec
TS80P Soldering Iron Case (power supply inside)
A "small" remix of Kitlaan's Soldering case. Slightly modified for European power supply and more tips :-). It is use for: The TS80P soldering iron + tip 3 additional tips European power supply USB-C cable Grounding cable Hex L key Like…
- Pobrania
- 96
- Polubienia
- 19
- Ocena
- 5
P
Printablesvier2acht
Abus SDS80 Pepperspray Holster
ABS/ASA 100% Infill Print in standing up position
- Pobrania
- 96
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMichal Vyroubal
Case for soldering iron TS80P / Pouzdro pro páječku TS80P
Housing for Miniware TS80P soldering iron. The housing can be printed with the filler separately, both in the version for flexible materials, where there are smaller tolerances so that the soldering iron does not fall out and holds well…
- Pobrania
- 94
- Polubienia
- 25
- Ocena
- 5
P
PrintablesAthetos
Gridfinity TS80P and 4 tip holder 3x2
Holder for a TS80P soldering iron and 4 tips. Remixed from: https://www.thingiverse.com/thing:4631801/files
- Pobrania
- 94
- Polubienia
- 21
- Ocena
- 4
P
PrintablesHOR
Remixed inserts for PjotrStrog's "Rugged Multipart Pinecil/TS100/TS80 Case (V2)"
Wanted to squeeze in syringe with flux, spare tip and power cable, but there was no such option, so I made a remix of inserts. It' compatible with PjotrStrog's rugged case and it's only for TS100.
- Pobrania
- 94
- Polubienia
- 41
- Ocena
- 0
P
PrintablesGotIssuez
SS80 Grip Plug EDC
The SS80 has a slightly different grip profile than the standard G43 so I remixed a version of the plug that I found on Thingiverse. The fit is a little tight to keep it from working its way out but there is a hole that you can put a wood…
- Pobrania
- 88
- Polubienia
- 7
- Ocena
- 0
P
Printablessicarius80
Rugged Box with tray for TS100, TS101, TS80 & TS80p
I've created my personal version of a Rugged Box with Multipart Pinecil/TS100/TS101/TS80 Case. Check the links for the original design. Latches and hinges need M3x16mm screws Print, seal in flex material. For the stand, you'll need a 608…
- Pobrania
- 86
- Polubienia
- 15
- Ocena
- 0
P
PrintablesBi92erk
Desktop Speaker Stand for Klipsch KD-51M and Jamo S803
Enhance your audio experience with this custom-designed speaker stand tailored for the Klipsch KD-51M speakers, featuring a bottom dimension of 150mm x 230mm. Notably, it's also compatible with the Jamo S803 and other speakers with…
- Pobrania
- 85
- Polubienia
- 5
- Ocena
- 0
P
Printablescimoalpacino
TS80 case
I wanted to have a case to fit all of my TS80 components, including the cable, that is really nicely fit arount the perimeter of the case. What fits inside the box: soldering iron 2 soldering tips soldering iron stand power supply (EU…
- Pobrania
- 79
- Polubienia
- 13
- Ocena
- 0
P
Printablesjoo
Solder iron holder for copper cleaning sponge (Pinecil TS80 TS100)
A holder for a soldering iron like the pinecil, ts100 or ts80 using a copper cleaning sponge as ballast. Pro Tip: Use double sided tape to secure the sponge container to the base. As it is the ballast, the holder will fall over if you…
- Pobrania
- 79
- Polubienia
- 18
- Ocena
- 5
P
PrintablesPUDDLEFIST
Visuo XS809 & XS809W Drone Prop Guard
This is a prop guard for the Visuo XS809W. Although I have not been able to weigh it, it is very light and comparable to the original.
- Pobrania
- 77
- Polubienia
- 14
- Ocena
- 5
P
PrintablesWilfred
TS80 soldering iron stand on Black and Decker Li-ion battery
A TS80 portable "wireless" soldering iron stand for use with black and decker batteries. The orange and black battery is a original one, the big one is a cheap knock off (40 Eur.) Super handy for use in the field. The battery clip can be…
- Pobrania
- 76
- Polubienia
- 29
- Ocena
- 5
P
PrintablesAlfie Lockrey
TS80P Soldering Iron Stand
Soldering iron stand for the TS80P soldering iron. The iron can be dropped in and retained, even with a heavy cable pulling it down it remains seated and will tip the entire stand before removing the iron. ( Although once tipped the iron…
- Pobrania
- 75
- Polubienia
- 14
- Ocena
- 5
P
Printableskennyd1gital
TS80P Soldering Iron Case
A storage case for the TS80P soldering iron by Miniware. The case has space for the TS80P soldering iron and five interchangeable tips, as well as a couple storage areas for a USB-C cable, tube of solder wire, or whatever else you can…
- Pobrania
- 73
- Polubienia
- 20
- Ocena
- 0
P
Printablesrfinnie
Eyoyo 8" S801H monitor stand
This is similar to another Eyoyo 8" 4x3 monitor stand , but with the following differences: Monitor tilted 20 degrees back instead of 10 degrees Larger, heavier base, with more material in back to make it easier to press buttons on the…
- Pobrania
- 71
- Polubienia
- 12
- Ocena
- 5
P
Printablesottersdangerden
Libre Computers aml-s805x-ac (la frite) Case
Setup for m3x18 screws, I run a tap but you should be able to run the screw in.
- Pobrania
- 71
- Polubienia
- 3
- Ocena
- 5
P
Printablesb2vn
Box for TS80 + accessories
I wanted a small box for my TS80 + the accessories I need. I decises that I did not need to include the power brick because the TS80 can run from the same power supply as my laptop. The body fits: 1 TB80 2 tips Mini T-Stand (…
- Pobrania
- 68
- Polubienia
- 8
- Ocena
- 5
P
PrintablesJacob G
TS80 Case V2
A slim simple case for the TS80 Soldering Iron, that holds the iron itself and any two TS80 tips. For the lid, you can either print the text to have a 2 tone color look, or print without the text for a debossed look. M3 screws are used as…
- Pobrania
- 66
- Polubienia
- 15
- Ocena
- 4,5
P
PrintablesPietDeVries
Modified stand for TS100, Pinecil, TS80 & TS80p Case
Modified the stand to hold a smaller (16mm outer diameter) bearing. Reason being this was the bearing I pulled out of a giveaway fidget spinner I found lying around. This does have a smaller hole so the tip will be in the bearing instead…
- Pobrania
- 65
- Polubienia
- 26
- Ocena
- 3
P
PrintablesStony3225
Helping Hand insert for Rugged Multipart Pinecil/TS100/TS80 Case (V2)
Insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2) with space for: copper wire one spool of solder the solder iron stand one tip two helping hands Print instructions Layer height: 2mm Material: PLA No supports needed Additional…
- Pobrania
- 64
- Polubienia
- 19
- Ocena
- 5
P
Printablesflazer
Pinecil/TS100/TS80 Solder Boy Cover
This is a remixed large lid for the rugged case (V2, Large parts). After printing my first pinecil case I thought it would be a good idea to pay tribute to an old handheld from the past. I just added “SOLDER BOY” to the lid and printed it…
- Pobrania
- 62
- Polubienia
- 40
- Ocena
- 0
P
PrintablesJacob G
TS80 Case V1
Version 2 found here: https://www.printables.com/model/205121-ts80-case-slim Just a small and simple case for the TS80 Soldering iron. When printing please flip the lid as it is designed to print upside down. I have included the STEP and…
- Pobrania
- 61
- Polubienia
- 15
- Ocena
- 0
P
PrintablesPieterv24
TS80P Case
Remixed jcobgad's original design to fit a TS80P iron Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: Real PLA Black Post-Printing ============= Category: Electronics
- Pobrania
- 60
- Polubienia
- 15
- Ocena
- 4,5
P
Printableschixxi
Soldering Iron TS80P - Protective Case
I needed a protective case for my TS80P soldering iron. There are many variants available already, but I was looking for a compact case for the TS80P with one tip only. I couldn't find one which fitted my needs, so I came up with this.…
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 5
P
Printablesjamie xu
Double Insert Rugged Multipart TS100/TS80 Large Lid with Miniware Logo
holds two standard depth insert in the lid
- Pobrania
- 59
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMattyT
DEWALT DXFRS800 Replacement Knob
Replacement knob for lost original
- Pobrania
- 57
- Polubienia
- 2
- Ocena
- 0
P
Printableszetiti10
Shokz S803 box
This box is designed to store Shokz S803 bone conduction headphones along with the charging cable. The closure uses eight 4×2 mm magnets to stay in place. If the magnets do not stay in place by themselves, you can add some glue to secure…
- Pobrania
- 56
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJakub Kotulski
Volvo v70II , s60, s80 SEAT BELT
It's compatible with the V70 (post-2005). It's not perfect, but it works. I printed it with supports only on the edges and used bridging. I use ABS.
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEddi Maevski
S800 Reptile Sky Shadow Control Horns
S800 Reptile Sky Shadow Control Horns Designed to fit the reptile S800 Sky Shadow, the original horns are a joke. Recommended print materials: Nylon carbon. PETG. ABS Print orientation Everything can be printed normally (as shown). Some…
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKenneth Henderick
TS80 collar
A TS80 collar that can be used on the TS80P for those who don't like the tapered collar that comes with the TS80P. I printed this on my SL1S, and would suggest to use this on a resin printer. I oriented the part vertical with the threaded…
- Pobrania
- 53
- Polubienia
- 9
- Ocena
- 5
P
PrintablesRumagelo
Siglent SDS800X HD 100mm VESA mount
Print 2 grippers, body with supports for the nut holes. 3 perimeters but infill can be light. Hardware: 10 M3 nuts and bolts 17-40 mm long. Longer than 25 mm will interfere with the power cord so only 9 can be installed. Also comes with a…
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCubic
Tripodmount Siglent SDS800X SDS804
Wenn man am Auto,am Schaltschrank,an einer Anlage arbeitet und keinen Tisch oder ne Ablagefläche hat ,dann ist man damit gut bedient ! Mit dem richtigen Stativ kann man die Höhe und Neigung einstellen und jederzeit leicht drehen , Die…
- Pobrania
- 52
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKatherine Dubé
Extended Height Blank Insert for Rugged Multipart Pincel/TS100/TS80 Case (V2)
I liked @Alvaro492's Blank Insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2), but I wanted it to be double height for storing miscellaneous soldering supplies. Tested with @tjb1's Double Layer Rugged Multipart…
- Pobrania
- 51
- Polubienia
- 14
- Ocena
- 5
P
PrintablesScotland (level2three)
TS80P Soldering Iron Slim Travel Case
I got a new soldering iron the TS80P and decided to make up a quick case thats sturdy and tough and keeps the iron tight in the case to protect against being tossed in a bag. The case accommodates (one) TS80P Soldering Iron, The one I am…
- Pobrania
- 46
- Polubienia
- 9
- Ocena
- 5
P
Printables[email protected]
TS80P Organizer & drawer grid system
Simple organizer for holdering TS80P soldering pen with its adapter, cable and up to 4 tips. Features Everything holds tight enough even when organiser is flipped. This is useful when organizer is used as infill for some kind of…
- Pobrania
- 46
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKevin
TS80P Solder Stand
Printed with Prusament PETG Jet Black 0.3mm no rafts or supports required.
- Pobrania
- 46
- Polubienia
- 10
- Ocena
- 0
P
PrintablesAsraff Amzani
TS80 Full Set Case
I decided to make one because others doesn't suit my liking. I also wanted to house 'everything' in this single case without leaving out something else, while I don't have a soldering iron holder, I decided to incorporate into this as…
- Pobrania
- 45
- Polubienia
- 3
- Ocena
- 0
P
PrintablesXadro
Reptile SkyShadow S800 Original Winglet
This is my Reverse Engineered Model aswell as the Raw scan, feel free to do what you like with it, if you manage to make a better printable model, please let me know. Spiral Vase Printable, makes it go a lot faster and comes out lighter…
- Pobrania
- 45
- Polubienia
- 1
- Ocena
- 0
P
Printablesmosselini1
Black+Decker Jigsaw (KS801SEK) anti-splinter plate (parametric)
I didn't see it directly but my jigsaw was crooked due to two holes being drilled non-horizontal internally. It resulted, at first, in my jigsaw cutting into the plate and ended up shattering it completely after some use. I remade the…
- Pobrania
- 44
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDarragh
TS80 magnetic soldering iron holder
This is a magnetic holder for a TS80 soldering iron. Version History Version 1 - Soldering Iron Holder.stl This version uses a pair of 10 x 3.5 x 2.25 mm N45 Neodymium magnets in the base of the print to attach it to a suitable surface. I…
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
Printablesrinkel
TS80P Case small
Just a smaller version of the nice TS80P case by Pieterv24 and jcobgad. Small iron likes a small box. It uses 5x2mm magnets to hold the lid closed. I also added the step files, so you can go crazy. All kudoos should goto the original…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 5
P
Printablestika
TS80p & TS80 skadis mount
A remix of a mount for the ts80s soldering iron
- Pobrania
- 41
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDonJakobo
S800 Sky Shadow HD Zero Camera Pod
This is a remix from a dual camera S800 Sky Shadow Camera pod. I wanted to make sure I had something that fit my HD Zero setup and was properly cooled and easy to setup. I went through 4 versions to get to this one and ended up printing…
- Pobrania
- 39
- Polubienia
- 1
- Ocena
- 0
P
Printableswolfone
TS80P Soldering Kit
Stores my soldering irons, tips, and accessories. Two versions available, for 1 iron and 4 tips or 2 irons and 6 tips. Might make an alternate version that is more self contained for portability. 65mm x ~120mm x 43mm with 2.5mm wall…
- Pobrania
- 38
- Polubienia
- 9
- Ocena
- 0
P
PrintablesOki
Soldering Iron Stand / Holder (TS80P + others)
This stand can be attached to the widely used Copper Wire Cleaning Box("ball" diameter is 70mm) with two magnets(8mm diameter, 3mm height). It can be moved around(from horizontal to 45degrees in any direction) but it still keeps in…
- Pobrania
- 37
- Polubienia
- 22
- Ocena
- 0
P
PrintablesOssilampe
Halter für Shimano Ladegerät Steps8000 Huasquarna
Um meine Ladegerät für das ebike an die wand zu hängen
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
PrintablesN. Polman
Zundapp 537-13.104 KS80
Zundapp Part 537-13.107. Bottom half of the KS80 cockpit
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTango Echo Delta
Volvo V70 / S60 / S80 — Drop-in Cupholder (OEM-style)
Volvo V70 / S60 / S80 — Drop-in Cupholder (OEM-style) A clean, drop-in cupholder that turns the unused coin tray (muntenbakje) of your 2001-era Volvo center console into a proper can/bottle holder. Designed to look factory once finished —…
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 5
P
PrintablesEugen Iosif
Rugged box for TS80P
Did not include the seal or the soldering iron model. The fit is spot on (in my opinion), on the firmer side, can be adjusted by heating the inserts. I printed it in PLA+, and I am pleased with it :) Hope it helps you. Cheers! :)
- Pobrania
- 36
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMaking With Steve
TS80 Clip System
This is a system I devised in order to keep all of my TS80 soldering iron pieces and accessories together so that they dont get lost or misplaced. All of the clips are really easy to print without support (except the power cord clip which…
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTurnt
TS80P Soldering Iron Station
I was looking to make a soldering station for my new TS80P Iron. I found awl13A's holder and it does an extremely good job of holding the iron so I modified its base to fit my station. The holder swivels and has a hole for a 3mm locking…
- Pobrania
- 34
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKajry
FLUXPEN D=12mm top large Pinecil/TS100/TS80 Case (V2)
Top large input for rugged Pinecil/TS100/TS80 Case (V2) with space for fluxpen diameter 12mm with solderin iron holder space and two spools of tin. Exact fluxpen: Here on TIPA Also should work with everything with diameter 12mm and length…
- Pobrania
- 34
- Polubienia
- 9
- Ocena
- 0
P
Printablesskola28
TS80P Smart Soldering Iron Pegboard Mount
I've printed it with pegs down, and pegs up — they both work great, but I'd recommend pegs down so that the visible surface when mounted is ‘pretty’ without the bridging visible.
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 5
P
PrintablesBKG
Gridfinity TS80
Gridfinity box for your TS80 and two soldering tips. There is an extra place to store a soldering tip while it's cooling down
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBlackbird
clean pod Philips S8000
Got a Philips series 8000 wet and dry shaver. The bundle didnt include the quick clean pod. The original is just a bowl with lid and otherwise empty, no function at all for the money they ask for. The cartridges with their secret cleaning…
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTim Holzhausen
Visuo XS809 Prop Guard
The Prop-Guards on my Visuo Drone needed to be changed.... Accoding to the make from kisolre I made a version 2 with smaler arcs and a version in two pieces. Print Settings Printer: ANET A8 Rafts: No Supports: Yes Resolution: 0.2 Infill:…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTechiejam
DIY Brake Caliper Dust Boot installer tool for Volvo S60, S80, V70, XC70, XC90 (P2 platform) #Volvo
This is a DIY Brake Caliper Dust Boot Installer Tool designed for Volvo P2-platform vehicles, including the S60, S80, V70, XC70, and XC90. The tool is fully 3D-printable. An integrated M8 hex-nut bump in the center allows the tool to be…
- Pobrania
- 31
- Polubienia
- 13
- Ocena
- 0
P
Printableslitelotus
M10 Nut TS80 Stand for Soldering Iron Box
its a small modification to accept a larger nut (because its what I had to hand)
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0