150 modeli
I created a Stealth Battleship Catamaran Wolvie Class - SBCWC for everone, who like models of Battleships :-) I wanted modeled my own (fictional) Stealth Battleship Catamaran in my Wolvie Class, in short SBCWC. I took and remodeled 5…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Overview Mounting plates for the 2U 7SBC Bracket (Split remix below) Current Versions Raspberry Pi 4 Raspberry Pi 3 2.5in SSD 1 Keystone Jack 3 Keystone Jacks Blank
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Intro This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key! Info It can be printed without supports. I printed it with 0.12 layer…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
I wanted to build a power bank that could support the USB PD protocol so I could charge all my devices off a single battery. I ended up with this 288 W/h power bank using 16 5000mah 21700 cells in a 4s4p configuration and leveraged a 100w…
A spacer to fill in the gap left after installing the GBA SP USBC mod. Feel free to use these files on a personal or commercial basis. robot_retro store
Bearing orientation is marked on the prints themselves and it's not what you expect. Long collet needs 43 mm of barrel to attach to and is recommended for a tight concentric fit. Shorter collet needs 25 mm of barrel. Hardware is either 9…
Intro These are two simple CAD 3D models of Yubico YubiKey 5 Series security keys ( https://www.yubico.com/products/yubikey-5-overview/ ). USB A .step file and USB C .step file versions are included. Measurements were done with caliper.…
V2 - jetzt Online Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile…
This 3d print is plug & play. No supports, no glue and no screws. Very tight fit.
This 144Wh 100w USB-PD power bank is the the little brother to my 288Wh version . My main motivation was to have a large power bank that I could travel on airlines with. The TSA regulation is 160Wh max . I ended up with this 144Wh power…
I ordered some ESP32's and printed the Chonky case without measuring. It seems the boards I received with USBC were about a milimimeter longer than the boards from the original chonky case. 51.75mm long boards Of note it seems the status…
Remixed flash drive and SD holder for Skadis with additional USBC and micro SD slots. I've included a smaller form option (picture) if you don't need as much storage. I've also made the dovetail connection to use the M3 T-nut system. But…
cable protection usbC samsung to print vertically
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results, your minimum layer height can be 0.06mm or less.
Features Perfect Fit: Precisely dimensioned cradle ensures a snug, wobble‑free fit for the Waveshare ESP32-S3 1.8inch AMOLED Touch Display module. Integrated USB‑C Port: Built‑in cut-out accepts a NOTOW Elbow USB-A to USB-C 90° braided…
3D printed spacer to be used with the Robot_Retro Dreamcast power supply. robot_retro store Designed by Joseph Tomkins
I purchased the Odyssey x86j4105 single board computer (sometimes called re_computer) and found very few cases were available for it. There is a $15.00 dollar metal case the manufactures sell and Akash17's Thingiverse record. But I wanted…
I printed this in black PLA at standard (.02) quality with no support. The original is on the left, the remix is on the right.
This is a case for generic PD trigger modules I found on Aliexpress. The rough length is 11mm. No support is needed but I had to clean up the oval opening a bit to make it fit.
3Dprint-Case with USBC-PD for the Nintendo 64. 1x PDC004-PD 12V 1x LM2596S https://de.aliexpress.com/item/10000000656280.html 1x Connector from original PSU 4x M3x4x5 Inserts 4x M3x8 Socket Screws
This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar
apple macbook cable protection usbc
I made this for my trayvax wallet. I've included a NO-coin Option if anyone wants to remix it to hold somethig else. Other than coin holder. so upon actually fitting it in, the card takes up way too much valuable card space..so I made…
A remix of the Robot Retro USB C spacer that has two nubs that fit into the groove on an OEM or after market shell. This ensures that the spacer doesn't fall out with after market shells, like Extremerate sells. Print with automatic…
Buy the module on Etsy --- Print it with 0.2mm layer height and a 0.4mm nozzle (or whatever works for you). No supports or brims are needed. The tolerances on this are tight. Depending on how tuned your printer is you might need to adjust…
I was inspired by LWCs splitter adapter approach, but had I few ideas of how to make a version that is easier and faster to print in different materials and is (marginally) lighter. Also I prefer long clamps on the thin part of the…
I like to have all storage in one place. so create this simple slot .
I needed a place to store that ugly docking station. So I made one for the Thinkpad USBc dock. You can mount it under your desk, with double sided tape, Gorilla-tape will work fine. There are two options, one with a full cover, and one…
USB-C Trigger board case Things Used: (non affiliate!) USBC Trigger CTP9 Category: Electronics
A 100w USB-C Battery Back made for 18650s, with a Switch and 2 additional USB-A ports. The pack is made for an 4s4p battery configuration. I have gotten a USB-C 100w Soldering iron and it holds up Ok, albeit struggling at higher loads…
Stand for charging devices via usb c for HSW.
I was building ergonomic keyboard called redox and I didn't have TRRS jack or teensy so I edited the case a little bit to house pro micro and usb c pinout board -…
3D printed spacer to be used with the Robot_Retro Gamecube power supply. robot_retro store
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
This is a custom box for the Particle Tachyon single board computer (SBC). This computer has the Raspberry Pi form factor, but does not use the exact same port, so a tailored case was in order. There are several variant of the model to…
I liked the original USB holder but i wanted more storage and a Gridfinity base. The magnet hole size for the base is 6x2. The storage design is from https://www.thingiverse.com/thing:5291498 but i am not sure of the source of the…
I've been through a fair few iterations of this, and this one is the first I am happy with. I have USB C plugs in my kitchen already, so this makes this sharpener super convenient to use and brings a knife back to life extremely quickly.…
3D printed spacer to be used with the Robot_Retro PS1 power supply. robot_retro store Designed by Joseph Tomkins
Holds most oval shape USBC to mini/micro adapters. print at 100% infill with TPU
The replacement bottom cover that ensures the integrity of the case as a whole. Compatible with the AXAGON EEM2-SG2 AXAGON EEM2-SBC.
USBC specification Bowling Pin, full size.
This is a simple USBC port plug to keep out dust, dirt, and water. The plug is designed to sit flush with a case and have enough space to get your fingernails in place to remove the plug for charging or data transfer. For more projects…
Cześć Festool-maniacy! Tym razem udostępniam Wam etykiety dla wyrzynarek marki Festool! Do wyboru macie etykiety dla skrzynek drugiej lub trzeciej generacji. Zalecam drukować w PETG/ABS ponieważ PLA w rozgrzanym samochodzie może się…
Got these Sparkfun knockoff usbc breakout boards, and wanted to put them in various projects. Made this crude 3d model to help develop enclosures for the part. part: https://amzn.to/3XQvXwo
Started with Spiritdude's case design, lengthened it and moved the usb port to align. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: Yes Resolution: .016 Infill: 20 Filament: IIID PLA+ White…
USB-C docking cable support. Height adjustable by 1mm - either add the flat slider or - to add another 1mm to height - remove the flat slider and add an additional middle one.
Compatibility: Joy-it SBC-Buck03 https://joy-it.net/de/products/SBC-Buck03 Riden RD DP30V5A-L https://de.aliexpress.com/item/32639806678.html Additional (Monitor Arm) Tube Mount…
A simple USB Holder for 5x USB-A and 5x USB-C devices. Does not require supports! If you like this model and print one please post a rating and a picture of your print as I love to see what colors you might choose to print it in. Thanks…
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results.
Heres another USBC Decoy board I designed a case for, check the pictures to confirm its the same one, I have seen similar looking ones but have a slightly different layout, these may not fit the case. They are very cheap from Aliexpress…
A stackable rack that turns a pile of mini-PCs, NUCs, SBCs or other small "servers" into a tidy, well-ventilated tower — with no screws, no hardware and no supports. How it works One LEVEL is a stiff honeycomb-vented floor sitting on four…
This is a clip on mount I have designed to mount Paradise Arcade Shops Kaimana J2 LED modules to Sanwa OSBC 24mm buttons. Also attached is the fusion 360 file in case you want to remix this to fit other buttons. If you would like to…
Modified Psion 5 internal housing panel for my upgrade project of Psion with single-board computer Khadas Edge2 and new 5" touchscreen. This model was based on Psion 5MX - Internal housing / hinge panel by Jon | Download free STL model |…
keep your usbc power board safe with this 3d printed case
A SBC head gasket to decorate a garage or room wall!
Duet 3 Case made to be mounted onto Aluminum Extrusion. Support 40mm fan, I used a noctua NF-A4x10 (40mmx10mm) Print with Supports if you don't have good bridging, if you do you you're fine, mine(pictured) was done without supports.. SBC…
This is a modular SBC or Development Board enclosure. Its base design principle is you stack on top of each other plates that hold various devices such as Raspberry PI, Arduinos, ESP32, hard drives, etc. You can customize it the way you…
This is a tough tight build. Edit: Backplate v2 has 2 more millimeters of depth, the side SMA ports adjusted, the ¼" screw threading extended, and exhaust cooling in the back. The extendo is 4 additional mm to make adding 20x20x10mm…
I was inspired by other solutions here, but I thought I could do something similar, but better :) Whats unique with my design: Designed for printing without overhangs or support Designed for heat-inserts (voron style) All three face…
Finally got off my butt and made a proper parametric model of a super BCAR. Now go out there and break it so I can go bang my head against the wall. Prints with no supports like most of my other BCARs. BOM: 18 F683ZZ bearings 18 m3x8~12…
USB and USBc Front IO panel for Mac Pro 1.1 "cheese grater" mod Front IO panel replacement for Mac Pro case conversion. It fits two USB-a ports and one USB-c port. [no audio jack because I couldn't find an HD audio cable with a single…
An Arduino UNO case that contains a Small Solderless Breadboard and a USB-B to USB-C adapter. It's great for students that need to have a breadboard and an UNO with them for various classes. the Type C adapter frees up some space in your…
I have usbc charging grips on my joycons for use when traveling to play games on my laptop. I made this case in order to protect the buttons/analog sticks from getting damage and randomly pressed while in transit. There are 2 sizes, short…
Printed from PETG, 4 walls and 100% infill because of transparency from choosen material. After printing just unscrew the battery holder, with flat head carefully unclip the original and xlip on the modified version.
一些拥有64位ARM架构的移动随身wifi是非常具有性价比的KLIPPER主机，在我居住的地方，这些二手的移动随身wifi比起树莓派来说更容易获得一些。 得益于自带板载储存颗粒，这种类型的单板计算机拥有非常快的响应速度和快速数据读写能力。 在网上翻找了一下发现暂时还没有相关的模型被共享出来，于是就自己做了一个 Some mobile portable wifi with 64 bit ARM architecture family are very…
Brackets to interface the Multi-Chemistry Solar Battery Charger and Sensing Voltage Regulator (MCSBC-SVR) with the grid plates in many off-the-shelf enclosures. Those grid plates are frequently designed on a 5mm grid. The holes in the…
3D model of Lenovo/Thinkpad USBC Docking Station Overall Dimensions, LxWxH, 210mm x 80mm x 30mm Models: DUD9011D1/ 40AF0135US
Designed to fit the Lab Rax or any 10" serverrack: https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u?from=search#profileId-1325352 M2.5 Bolts & Inserts are used for Raspberry Pi Zero (2) M3 Bolts & Inserts are used for…
For each half you will additionally need 10pcs m2 6mm screws and 5pcs m2 8mm spacers. The spacers can be quite tight, so you can try heating them up a bit, or using a screwdriver to screw them in. If the printer is set up well, they will…
This is a mount specifically for the NC701 USBC Dock. (cheap dock with PD passthrough) 3mm walls, (effective 100% solid) 0.3mm layers or smaller. (no supports needed) Link to Dock:…
A 3d model so you can make your own adapters. Scanned with Revopoint MetroX. 10.5m polygons, 500+ MB.
Just a basic usbc cleaner. I couldn't find another model on here that worked well for me, so made this real quick.
You can find the DIN clip used, form here
Years ago my trusty Philips SBC HP-890 Headphones died on plastic cancer, the parts between the speakers and the headrest broke away in thousands of pieces. To good to be thrown away they rested in the shelf with no real future. Last week…
Very simple clip-in design to hold adapter in place offset from a flat surface.
The mounts of my Philips SBC HP 840 headphones were broken at all. Even the blue electrical tape turned out to be powerl
Simple mounting tray for the Duet and Rpi. I have it laying on the base of my enclosure, could be easily modified for vertical and upside down config
This is a slim mounting bracket for a Duet 3 6hc board in combination with a Raspberry Pi 4B or any other SBC for that matter which has the same mounting hole dimensions. There are two versions. The standard Version and one with a little…
An enclosure for a single-board computer PB_SBC01_H3 (pbsbc01h3).
A PINE A64 Case - an alternative for raspberry.
I keep my tower under my desk where the top corner is the closest to me and i wanted to add usb-c to the front io. Combined with this , I utilize an existing hole in the metal of the tower directly behind the original cooler master logo.…
Requires: - 2x M4 screws This print will also require supports. I also don't think I created this in the right orientation so you might need to adjust that so that the “ugly” side that touches the support is down and won't show when…
For each half you will additionally need 18pcs m2 6mm screws and 5pcs m2 8mm spacers. This is the version with the encoder on top. If you have the version with a nice!view, nothing there, or the encoder on the bottom, please edit the STEP…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…
Front mount for HGLRC M100 GPS (21x21), designed to sit in the GoPro position. Added a USB-C extension holder — I’m using an O4 Lite mounted on the stack, so this lets me access the port from the front without taking off the bottom plate…
A simple remix that adds USBC/PD module support.
Summary Convert a Fossil style Android Wear charging mat from being a charger with a built in usb-a cable, to a compact modular usbc device. What you need (affiliate links, thanks for your support) Android Wear Fossil Charger - used this…
Philips SBC HP200 headphone holder.
BOM: Orangepi 5 SBC 25MM heatsink 6 inch Right Angle USB C to USB C 6 inch (flat) ethernet cable 140W 6 Port PD USB C Charging Station ( aliexpress link) TP-Link TL-SG108 modded with below USB C PD trigger board. JacobsParts USB-C PD 5V…
The left and right sides are identical and can be used interchangeably. This applies to the Philips SBC HP200 headphones
At this point there are modules for the following SBCs: Raspberry Pi 4 Raspberry Pi 4 with Waveshare PI 5 adapter Orange PI Zero All designs contain holes for heat inserts
3d print file for USB and USBC drive holder.
Print with original settings Only one 016 o-ring for the Collet, I removed the others
change the top larger assembly to make room for my toggle switch and female USBC header added for power input
There are no Keystone Mounts available for the Racknex UM-SBC-209 so i thought i design my own. Print Settings Printer Brand: Creality Printer: K1 **Supports:** Yes Resolution: 0,2 **Infill:** 100% Category: DIY
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
![[3d scan] Festool PSBC 420EB](https://media.printables.com/media/prints/1124551/images/8487109_c215b69d-9e54-44f8-86d8-ed778d73824c_945ae111-3b34-422c-94c3-f21648c2c42a/screenshot-2024-12-28-205610.png)
