106 modeli
When I saw the latest contest, I just couldn't resist. Organic supports create so pretty trees! I just thought of my childhood days and the fun we had playing badminton; shuttlecocks stuck in a tree was a common occurrence. I found this…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove. This test print is primarily for you to test the different values / results…
Print in place Needs Supports
18.05.2025: OBSOLETE! Successor model IAF Idler (Install and Forget) can be found here: https://www.printables.com/model/1269218-nextruder-mmu-multi-material-gamechanger-iaf-idler After many failed prints in which the extruder stops…
These pads lift the chair by 8mm- enough, so that the Vacuum Robot is not getting stucked.
For this model use the following parameters. Print Settings: Layer Height: 0.16mm (Or lower) Infill: 10% Infill Type: Grid - Gyroid Filament: PLA Supports: No Brim: No
Automatic fish feeder for your aquarium. Stuck-free mechanism - a spring-loaded blade decreases the load when a pellet is on the edge Self-cleaning structure - debris will drop into the aquarium Easy to make - only 3 parts Note: It…
Universal clip that fits around 5 gallon bucket rim. Keeps bucket from sticking together when stacked. For best results use 3 clips evenly spaced around the rim.
The original Cube design is from south2012 from Thingiverse. I redesigned it and it can fit a coin inside it. A fun thing to show your friends. They will wonder how the coin got inside there.
For this model use the following parameters. Print Settings: Layer Height: 0.16mm (Or lower) Infill: 10% Infill Type: Grid - Gyroid Filament: PLA Supports: No Brim: No
Santa Stuck in Crushed Chimney – Stylized 3D Print Design This cartoon-style 3D model features Santa Claus comically stuck headfirst in a brick chimney, with his legs flailing in the air and his iconic red suit and black boots on full…
Extra bumpers / antennas to attach to front of vacuum's bumper to prevent it from getting stuck under kitchen cabinets. Printed from PETG.
corner barrier against stuck of vacuum robot on clothes dryer stand
Playful decorative bunny stuck inside a cracked Easter egg with tiny paws showing.
A 2D tile of John Egbert from Homestuck. I made this for my daughter. Print instructions I printed it at 0.2mm 10% infill in white eSun PLA+ but it can be printed from any brand filament at most slicer settings within reason.
If your robot vacuum keeps getting stuck on your airer, these raised replacement feet are a clean and aesthetic solution. Instead of adding barriers and other extra plastic parts, these feet replace the original ones. It adds extra height…
Couldn't find Homestuck characters anywhere, so I thought I'd give it a go.
'There she is. Forged in fire by the smiths of Pipplemop, commissioned by the sage Lord of the Wozzinjay Fiefdom in the Realm of the Snargly Fruzmigbubbins.' Here's my test of the Warhammer of Zillyhoo. I made this long time ago, to print…
These are no one-size-fits-all Roomba stoppers like others I've found. They are tailor-made for the following two laundry rack models: Leifheit Pegasus Alpfa Magic I printed them from TPU and fixed them with a small screw. The screw may…
This is a captcha card I made based off of an image. Its mostly accurate, but not perfect. The tall version is 38.1 mm, the regular version is 12.7 mm, and the small version is 9.525 mm.
Fred has been scaled down to 17mm wide (66.84% scale). 20mm calibration cube was designed in fusion360 to fit fred, models were combined in tinkercad.
❄ Snowstuck Gnomes – A Chilly Tale of Tiny Trouble! 🧙♂ These poor gnomes took one wrong step in the winter wonderland… and now they’re stuck up to their beards in snow! Few supports are needed. I used organic-style supports, which peeled…
Funny Easter bunny decoration with a bunny stuck in a wooden fence — only the fluffy tail and little paws are visible.
On the Stern Pinball “ Foo Fighters” game there in an area in the upper right of the playfield where an airborne ball can get stuck between the alien toy and the left ramp wireform. Some users have been able to avoid this by adjusting how…
Sometimes, wet beans get stuck. Spin to push leftover beans to the grinder. Worked well with PETG.
I’ve had problems with my Xiaomi Dreame F9 robot vacuum getting stuck under low furniture like my bookshelf. This bumper is a solution I came up with. It fits snugly on the front brim of the robot and prevents it from going too far under…
The model is suitable for 3D printing. It can be printed both hollow and solid. If you want a keychain or a stable one, check my profile.
Works alright. Made for the SVX102T flattener and reducer, but can be easily resized to your needs. I used one successfully on threads, and a pair on smooth tubing. 5mm thickness is fairly sturdy and makes alright contact. It can still…
Original design of the 3D pen spool is great, but filament will get stuck easily in the spool and causing problem. This is the spool re-design remix to reduce filament tension, letting the filament slide out on its own instead of dragged…
My Shimano M485 had one of the pistons quite stuck, which resulted in one of the brake pads being completely worn out rather quickly. I used this to keep the other piston (the one that still moved) in place and to then exert pressure on…
My Homestuck collection is growing! This is the character Nepeta from Homestuck. I do love a good character identifying as a cat, or whatever Nepeta's story is. I'm not the Homestuck fan, my daughter is and despite trying hard to follow…
The original design of the device would get stuck on the heated bed when I used it, so I redesigned it to reduce its height to avoid scratching the heated bed, as shown in the second picture. Just use PETG to print. I print 100% density.…
It is the perfect decoration for a Gamer's desk Hope you like it!
a ball in a cube that won't come out no matter what you do!
Bring a dose of holiday humor into your seasonal décor with the Santa Stuck in Chimney Candle Holder — a playful and charming 3D-printed piece designed to light up your Christmas evenings with a smile. This whimsical decor item features…
Addition to Leifheit clothes dryer as in picture - your robotic vacuum cleaner wont stuck anymore
Remixed the original to fit the existing board that comes in the charge base. I just removed that and hot glued it into this one. Did this to address the issue with the pogo pins getting stuck and not contacting the light to charge. This…
As I never did get around to picking up a stuck case removing kit from RCBS or the like as it just never occurred to me to need to. After seeing I don't remember where, most likely one of the reloading manuals that when you have a brain…
gremlin stucked in lights at christmas
Tool allowing to unstuck a Ryzen CPU stuck to its heatsink. Apply heat with an hair drier, and gently push clockwise or anti-clockwise against the lid (CPU cover in metal) with that tool. You can use a cotton cloth to prevent the CPU to…
On some older PTS EPM Magazines it is possible for the catch that keeps the bbs in the magazine when not in the gun to get stuck in the back, which will cause your magazine to spill all remaining bbs once you take it from the gun. This is…
The model is suitable for 3D printing, and the recommended size of the entire figure is about 5 cm. It can be printed both hollow and solid. The ring size in the photo is smaller.
Basic aid to keep tongs closed when put into drawer for space savings. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.20 Infill: 25% **Filament:** 3dwarhorse Pla Black Category:…
Drying rack rising feet to prevent robot vacuum getting stuck. round to not require any adjustments clip on rack frame of 16mm Best printed in PETG or other materials allowing some flex.
Description i designed a pen holder that consists of 4 gears like the ones used in bikes. designed this in fusion: it has 5 axis like bolts and spacers between the gears to hold up all together stacked. there are 5 nuts that secure the…
This model was Designed in Fusion 360 With the help Of my brain and Hands ( also my eyes ) Already thanks for maybe downloading my model!
Sometimes the Konica C35 ASA/ISO dial gets stuck. It can be very difficult to turn it by hand. I made this simple tool for me, and it works very well for my Konica C35 AF. Perhaps it will be useful to someone ?
Added chamfers and the 'Prusa-trick' so the top prints nicer.
This is my second iteration of inserts for LEGO® storage bricks and heads. My first version was made from PETG, but the rigid material didn’t work well, they got loose in the end. With TPU (A95) these rings are flexible, press-fit…
Groot stuck in the portal from the Valve Portal games!
The model is suitable for 3D printing. It can be printed both hollow and solid. If you want a keychain or a full figure, check out my profile.
Wall Plug Stuck!! (dummy) CABINET KNOB “Too Hard To Plug It Off!” Turn the pain point into the design. If it was hard to plug off, let it be your knob! Just fixed it to your cabinet. We designed it in 3 different ways 1. "iPhone charger…
Preface As of 2024-04-06, this is untested. I only have a 27.2 mm variant because that's a super common seatpost size. Motivation when a seatpost gets stuck in a frame, removal is best done with the assistance of a penetrating oil like PB…
I wasn't able to find Homestuck characters anywhere, so I thought I'd give them a go myself. It's not perfect, but if you know what you're doing and can tidy it up, I'd love to see your version.
Looking for a unique and spooky decoration to print in 3D? This Skull Stuck in the Wall model is designed to create the impression of a skull embedded in a textured wall. A great project for Halloween, gothic interiors, gaming setups,…
If you are pissed off of the stuck garden hose, this little under one meter of filament model will make you happy. Let's end up with garden hose stuck while pulling it.
The “Leaves” are very thin and thus the slicer will not print it but will still print the supports. The support settings below are important to getting the “tree” look. Please note that if you experience the print falling over you can…
If your Nextruder heater stucked on block you can use this tool. Place heater block with this tool and hit the protrusion on the heater Then it will be loosen You can use hammer or screw driver CAUTION Please be careful with your hands!
Fill this egg with candy, stab it in the dirt, and watch the fun begin! No one will suspect the egg nestled in the grass is stuck there quite firmly. I used PETG and NGEN, but any material should work just fine. Stabby Egg.3mf contains…
This morning my Keurig 2.0-400's handle stuck open. A quick Google search pointed out a work around and a less than impressive DIY fix. I quickly took to Fusion to create a more elegant and permanent solution. The reason that this happens…
This is Roxy Lalonde , the character from Homestuck in the traditional pose you see in pictures of her. My daughter loves Homestuck and I wasn't able to find any 3D character files, so I have slowly been creating her favourite characters.…
Have you found your CR Touch doesn't Probe or doesn't Straw. I found that if you make it a bit out to help solenoid friend a push. (Editor Note: No Glue Needed for the Snap Version) Video :
Excalibur stuck in a pumpkin
Der Weihnachtsmann steckt im Kamin fest.
The snowman was just riding the skateboard and suddenly he hit a tree and everyone was laughing 🤣🤣. Me nooo 🤫🤫🤫🤫
Test print to confirm that the whole print area is usable without the umbilical getting stuck between printhead and X motor. Note: Size is the nominal advertised area but you need to scale this model very slightly down to allow for tool…
If you have a robot vacuum (like a Roomba, Roborock, etc.) and a dining table with flat U-shaped or sled-style legs, you probably know the struggle: the robot constantly tries to climb the flat metal base, beaching itself and getting…
Add brass M4 nut and long screw. Recommend to use brass, this will not damage the point of the steel pin of the machine! Simple print, optimize for strength. E.g. PLA is strong at room-temprature, but not so stiff. Add steel 2mm pins in…
allows you to get beans unstuck while still using the stock bellows for the VS3. print upside down with support
I needed to remove some stick on NVME heat sinks as I was repurposing them in a new project with it's own heatsink. Oh lord! that feeling that you will just rip the chips of the circuit board. So designed and printed a tool that provides…
(english below) Zweiteilige Gussform für Gips und andere Vergussmaterialien (z.B. Beton, Resin, Wachs) angelehnt an einfache Gründerzeit-Stuckelemente. Während des Anbringens von Stuck um meine künftige Durchreiche zwischen Küche und…
It is an Elite liquid series AIO cover.
Vice that allows to un-stick bezel on X-wind watches. If a bezel doesn't move try to apply penetrating oil (rust removing etc) to the bezel edge and leave it for few hours or more then you can use the vice to give it a push. It's printed…
My Homestuck collection is growing! This is the character Damara from Homestuck. To make this model you will also require 1 x paperclip. I'm particularly fond of this one, because it required a little problem solving. Damara has some very…
a button in the shape of a sword stuck in a stone
It is an Elite liquid series AIO cover.
Got tired of small LEGO parts getting stuck in the bottom of these containers and made a custom plug that fits snug. No need to glue it in place!! Printed in PETG+ with 15% infill, 2 walls, 3 layers for top and bottom.…
OpenGrid Snap Puller T-handle that pulls stuck snaps out of the tile A one-piece tool for removing openGrid snaps (the threaded squares that press into the grid). It screws into the snap's own thread, so you get a proper handle to pull on…
It is an Elite liquid series AIO cover.
It is an Elite liquid series AIO cover.
My Beatbot iSkim 2026 kept getting stuck on a shallow step in my pool, so I designed extended bumper/legs that attach onto the robot's existing legs to add clearance and stop it from beaching itself. No modification to the iSkim required.…
Oops! Santa went down the chimney head-first and got stuck, with only his legs and boots sticking out. A funny Christmas decoration for the mantel or desk. Print notes: Tested on Bambu Lab P2S, 0.4 mm nozzle, PLA 0.12 mm layers, 3 walls,…
It is an Elite liquid series AIO cover.
suggested to print in petg because pla is brittle and this needs to flex a little in order to fit tightly
Meine Tochter hat ein Stück Kabelkanal benötigt. Dieses sollte die Kabel von einer Kommode zum darüber an der Wand befestigten Fernseher verdecken. Leider kein einfaches Profil, sondern dem von ihr verwendeten Stuck nachempfunden. Der…
If your Nextruder heater stucked on block you can use this tool. Place heater block with this tool and hit the protrusion on the heater Then it will be loosen You can use hammer or screw driver CAUTION Please be careful with your hands!
❄ Snowstuck Gnomes – A Chilly Tale of Tiny Trouble! 🧙♂ These poor gnomes took one wrong step in the winter wonderland… and now they’re stuck up to their beards in snow! Few supports are needed. I used organic-style supports, which peeled…
allows you to get beans unstuck while still using the stock bellows for the VS3. print upside down with support
(english below) Zweiteilige Gussform für Gips und andere Vergussmaterialien (z.B. Beton, Resin, Wachs) angelehnt an einfache Gründerzeit-Stuckelemente. Während des Anbringens von Stuck um meine künftige Durchreiche zwischen Küche und…
Playful decorative bunny stuck inside a cracked Easter egg with tiny paws showing.
Funny Easter bunny decoration with a bunny stuck in a wooden fence — only the fluffy tail and little paws are visible.
It is an Elite liquid series AIO cover.
