7658 modeli
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
The included nozzle for my 2.25" Shop Vac has never been “just right” for vacuuming out a vehicle. It’s also been a little too narrow for my needs. I've been using it mainly for cleaning up my pellet grill, so I was in need of a “clean”…
This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - https://www.thingiverse.com/thing:491108 I took the design and made some adjustments to the geometry and finish to allow for…
This is the sealing clip that comes with most of the filament vacuum bags. It's annoying that most sellers only include 2, so I made this and printed a bunch more so each bag has its own clip and I don't have to go searching for one.…
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
The Xiaomi Mi mini vacuum cleaner is a nice little and affordable tool. However, it comes with only one nozzle. To reach small areas and especially to clean my printer enclosure from plastic debris, I have designed this small tube nozzle.…
Simple but effective disc for usage with filament dry bags. I always had difficulties in using the pump right in the first attempt. Just put one disc with the filament in the bag and exhaust the dry bag manually or with a battery pump…
Vacuum adapter that fits Ryobi orbital sander output to Ridgid shop vac Printed in PLA at 20%, worked pretty well so far for me. Designed from: https://www.thingiverse.com/thing:1246651
I needed a thin nozzle for my shop vacuum to get into tight spaces. Fits on a Porter Cable Shop Vac. Airflow on original version isn't great, but it gets the job done if you need to get into very tight spaces. Wider version has much…
Bold Lamborghini-inspired hood lines and vents. Roomborghini Available in two versions: Full model or half STL – for large printers. Split into 4 pieces – for easier printing on smaller build plates. Pre-sliced G-code file included…
Vaccine Vial Holder for PfizerBioNTech vials based on model created by: Ales Padrta and Zapadoceska Univerzita for hospital in Rokycany (…
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
This is 61mm x 40mm
This adapter allows the nozzle to be angled at 60 degree for Xiaomi Mi Vacuum Cleaner. Print Settings: Material: PETG Layer height: 0.26mm Supports: No My Other Xiaomi Mi Vacuum Cleaner's Accessory Holder -…
This is a compact and efficient vacuum cleaner nozzle, designed with a focus on versatility and convenience. This Model is available in 3 different lengths. 100mm, 150mm and 200mm. Every Version features a 20mm x 100mm opening at the top,…
I looked around for a 40mm blastgate design to use in a dust extraction system. I found a couple but all of them were pretty big and stuck out from the pipe a fair distance, they also required alot of hardware to make them work. I made…
Designed a shop vac nozzle for my brother that has a slot shaped entrance. Fully parameterized for all the critical dimensions. I printed in PLA with 6 perimeters and an internal brim.
If you want to use an automatic floor register, follow these instructions: Find 3D-Printed RC cars here.
These are attachments and adapters for the Milwaukee M18 2 gallon wet/dry vacuum, model 0880-20. You can use the hose on it's own or with the printed micro crevice tool accessory. It is compatible with the commonly available micro vacuum…
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…
I designed this adapter for my Kreg track saw for hooking it up to the Rigid 1-7/8 shop vac. I found a much better solution after that from Rockler but maybe this print will be useful to someone else. It fits the original twist lock…
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient…
Just download PrusaSlicer 2.6 , then open the 3MF file. You will be able to click on and change the text. The tag slides together and stays shut with a string or tie. This is to keep people from seeing your info unless it's important.…
Da ich meinen Staubsaugeraufsatz für Ritzen irgendwo verloren habe, hab ich einen neuen erstellt. Das Saugrohr meines Dirt Devil Skuppy hat einen Außenumfang von ungefähr 9,9cm. Vielleicht passt er auch auf andere Modelle. Since I lost my…
This is an adapter to connect the Kärcher Vacuum Cleaner to a Bosch multi-sander. It has an intentional tight fit on both ends. Add grease before attaching the adapter. The nozzle on the Bosch multi-sander has a diameter of 29-30.5mm and…
This pickup tool for SMD components is intended for use with an external pump. The main novel feature of this pen is an adjustable leak air slot. Some background may be useful. For picking up SMD omponents from cut tape or from tray, a…
Turn your cleaning routine into a rodeo show! This project is still a work in progress. Sorry, I haven’t had the chance to fully optimize it yet, but I will provide an updated version as soon as possible. This 3D printable accessory…
After a few years of use the dustbin was not latching to the vacuum cleaner and this rendered the vacuum cleaner useless( sensor detects whether the dustbin is properly closed). At first glance the part could be glued, but this was only a…
Required Hardware 2 4x35 wall screws 2 wall appropriate anchors 2 M3 heat set inserts 2 screws M3x8 Notes Made with the personal version of Autodesk Fusion 360 therefore non commercial only. Source file included.
Neuer Fräsanschlag, neuer Anschluss Für meinen neuen Fräsanschlag habe ich einen neuen Anschluss konstruiert. Der Flansch hat eine Kantenlänge von 70mm. Der Anschlag wurde aus 12mm Material gefertigt.
My Dyson DC07 hose has an arch on it and did not allow me to suck the air out of my vacuum bags. This attachment will snap into your Dyson hose and allow you to get all the air out. Printed with PLA but PETG will work as well.
This vacuum attachment is meant for vacuuming in tight spaces. Specifically, it angles “down" along the long edge for concentrated suction.
A simple loose-fitting privacy cover for the Logitech StreamCam webcam. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Rear Perimeters: 2 Layer override: 3 perimeters on the topmost layer so no…
I modeled this to replace the worn out hexagon portion of the Neato Botvac that seems to tear up on every vacuum. I printed mine no supports, but on a raft just to make sure the gear teeth came out clean. I have about 6 months of runtime…
Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…
Jet-Vac (light) Skylanders
This model is a replacement for the included desktop charging stand. It was designed to be wall mounted and use the original power supply. It has several parts and requires some specialized fasteners which can be found at most ACE…
The Xiaomi Mi Vacuum Cleaner G9 has a very useful wall mount/charger. It hosts the vacuum and 2 of the 3 accessories. The third (usually the brush bar with the extension rod) is intended to be mounted onto the vacuum, but I had no enough…
Introduction (English / French / Italiano) EN: The locking button on a few accessories of my (great) Dyson Vacuum cleaner had broken and could not buy it as a single spare part. I also lost my nozzle head for corners and tight spots….. I…
Výška (height): 120mm Průměr (diameter): 80mm Vnitřní průměr (inner diameter): 62mm
vacuum cleaner nozzle thin and long
Requires an O-ring measuring 34.52 × 3.53 mm.
This particular head is an important part of the vacuum cleaner that allows the effective collection of dust and dirt from corners. TIPS To fit perfectly, you must measure the diameter of the vacuum tube with a caliper and change the size…
Vacuum Cleaner holder for Ikea Plasta Cabinet, to fix the hose on the wall of the cabinet. I used some spare screws from the ikea plasta cabinet. The hose diameter of the vacuum cleaner ist 45mm I printed it with support and have not…
Just an osVAC M32 Parkside PWD 30 B1 Adapter :-) based on osVACneo Fusion360 files. Printet with suppport on bed only.
Vakuum cleaner attachment for drilling holes. It holds itself on the Wall. Printed with 0.2 layer height in PETG. Print took about 3h 7min. Use support on the inner ring.
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Ferdinand Porsche didn't like the cars in existence at the time so he built his own. We haven't built our own cars on our printers yet, but we can make replacement parts. Example: The Porsche 944 and 968 have a HVAC control that is…
Bosch GTS 10 XC 50mm Schlauch inkl. Doppelkonus super dicht Der hintere Anschlussteil für den Schlauch ist etwas länger, damit der Schlauch eine gute Auflage hat und schön dicht ist. Länge: 75mm Schlauchanschluss: 50mm Infill: 50%…
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…
The dust container of my Eufy HomeVac broke. After Eufy support told me in no uncertain terms that they were not interested in selling replacement parts and that I should buy a whole new unit instead, I thought: no way! What do I have my…
An adapter that fits a (Phillips) vacuum cleaner to suck as much air as possible out of zip lock bags. the inner diameter of the adapter fits a 38mm vacuum cleaner nozzle. Print instructions i printed with the prusa speed 0.2 profile with…
Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/
Je to ochrana před úrazem elektrickým proudem při práci v rozvaděčích. Zabraňuje náhodnému dotyku propojovacího hřebenu ze strany.
This print is a privacy shield for the eMeet NOVA webcam. I believe newer versions are sold with privacy cover but mine came without one. So I designed this privacy shield. You can simply slide it in and out of place. The USB cable on the…
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Endpiece from a Sears Craftsman Shop-vac hose used to connect accessories to. The original I had cracked. The outside diameter of the hose end is 2 1/4 inches. taken from https://www.thingiverse.com/thing:357574
Malé vyprošťovací desky v měřítku 1:10. Velikost XL : 35x137 , průměr díry 3,2mm Možnost kombinování s kanystry. Možnost přidělání na zadní držák kanystrů.
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
Description: This custom funnel fits perfectly into the Xiaomi Robot Vacuum E5 water tank opening, making it easy to fill without spills. Works great with water filter pitchers (like Brita) or tap water - no more struggling with the tiny…
This adapter is designed to fit the outside diameter of the 4" dust collection port on wood working tools and reduce it to the ID of the 2.5" shop vac / dust separator hose. Many online adapters and store bought adapters that I've tried…
I added a Negative Volume cylinder in PrusaSlicer to create the notch. The model preview will look odd, but it's there. The original model is otherwise unchanged. I also printed with different PrusaSlicer settings from the original —…
I installed a couple of Mini-split HVAC units and needed a way to secure the line set, drain and control cable to the wall. This design will accommodate different size line sets, conduit and piping. It accepts 2 zip-ties to secure the…
The small slit at the left edge of the camera opening allows to see the activity indicator without opening the slider. For the print, supports are necessary for the “Back” piece. Assembly Insert the slider into the indentation of the…
When the Canvac doesn't use all motors, air pressure is lost through the unused ones. It will suck air through the motors that aren't running. Capturing Dust found this to be to the tune of 6-15% CFM. This valve fixes the problem by…
My holder got broken after some time. I have created similar one that works fine. The printing method was set on speed over quality and I forgot to set the correct table temp therefore edges of the printed model are bent. Of course if you…
Repair part for car vaccum pump OEM 8E0927317. Print Settings Brim: No Supports: No Infill: 20 Filament: Any PETG Layer Height: 0.15mm
Prevent your robot vacuum from driving over low furniture feet with these simple and effective clips. Designed to securely hold furniture feet in place, these clips provide a barrier that keeps your robot vacuum from getting stuck. Ensure…
Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…
Use your Flextail Tiny Pump as blower Air Dusters
Original onShape project: https://cad.onshape.com/documents/0c3b8288c7b92d178ec1f3ff/w/b7a05d6d8787b131fd44b065/e/38e3f2fc0970434ac8e5aed7?renderMode=0&uiState=68fe239e2195008bbebe03d0
Small print part for a missing piece
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
A wall mount for the Hoto vacuum cleaner with a small hole in the bottom to fit a USB-C cable. I used a glue gun to hold the cable, then put the left over cable in the base and mount it to our kitchen.
Here is a quick source of small (6" x 6") sheets of material for a quick prototype if you can't get material locally or want to try forming a sheet from a specialty material. I prefer using a 0.8mm nozzle for quicker printing. But a sheet…
I made parts to hold the rolling bars on the spool holder.(Remixed PTFE-holder-VAC-R3.stl ) The rolling bars of MMU's Classic vacuum-formed spoolholder are not fixed and can easily fall off. (That's annoying.) These are parts to hold…
A design born of necessity. The floor vent in my bathroom is right in front of the toilet against the wall. In summer, the AC freezes my feet, in winter the heat from the furnace directly below scorches my toes. Enter the HVAC deflector…
This is a vacuum cleaner attachment to help tarps, drop cloths and lightweight rugs from getting sucked into the hose. It fits 1-¼" vacuum tubes. The little fingers hold the tarp away from the tube but let the dirt get sucked up. The…
This adapter serves as a connector between a Durabase vacuum and a Rowenta vacuum.
Vozík na přesouvání těžkého nábytku, podkládá se pod nohy např pohovky a potom ji může přesouvat jen jedna osoba. Vyrobeno z PLA, ale možná by bul vhodnější PETG. A trolley for moving heavy furniture, it is held under the feet of e.g. so…
So this adapter is for a 43ish mm vacuum hose to connect to the Bestway 27 mm hole for vacuuming. the small end is a touch small but if you use a real hose clamp it will work fine. the model i mad does have a few errors, I'm sure someone…
Turn your robot vacuum into a legendary knight on a quest! Left side of the Sword (Excalibur) Right side of the Sword (A.D. 1136) This 3D-printable kit includes: Front Sword — a blade that declares your cleaning crusade. 2X Side Blades —…
Converts and attaches 44 mm vacuum hose to dwe6421k Dewalt random orbit sander. This optimizes dust collection, by removing at least twice as much dust! No supports Infill: 10-50%
The screw and nut are designed to fit the holes under the table: The connector must be attached to the 100mm tube of the vacuum cleaner: For the connector, you can use two 40x10x10mm neodymium magnets (or four 40x10x5mm). I used these…
Controlling dust in a woodshop is always an issue. The bag collector included with the Porter-Cable PC60THP planer does only a moderate job of collecting the sawdust and chips produced by the planer. Replacing the dust bag with this…
Dyson Outsize Absolute+ Vacuum Seal Bag Attachment I created this using the template from @M3D3. You can use it from most newer Dyson stick vacuums.
This is a wall-mounted holder for the two original accessories that come with the Levoit LVAC-200 cordless vacuum cleaner . The mount keeps both accessories neatly organized and easily accessible, instead of lying around or taking space…
This adapter help you cleanse when you drill on the wall.
Nalepovací organizér na vatové tampony.
Model náhradního pantu pro box prachu.
EN | Remodeling timetable This school schedule is 100% re-arrangeable, you can take the pieces out at any time and straighten them according to the new arrangement of timetable without having to cross out or erase anything. Instructions…
I found my vacuum cleaner stuck at middle of room with stuck right wheel. When I took it apart, I found that screws what hold wheel in piece jumped out and blocked rotation. They jumped out because threads on opposite side of wheelhalf…
Allows for convenient placement of the accessories on the doors or sidewalls of your storage compartment. The long part can be glued together but gluing is optional. I did not glue the parts together. There are more accessories available…
![OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]](https://media.printables.com/media/prints/b71a27c1-9267-4670-9146-e964da248f9a/images/10373390_bae051a6-9257-43f9-a3b1-42b074d21a22_c061616a-6335-4414-8c31-27bf909e02c6/vacuum_hose_kaercher_f32.png)
