741 modeli
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Cases for Raspberry Pi 4B with POE Hat from Waveshare. PoE HAT B with OLED screen or C without the screen. Bottom and top cases snap together without the need of screws and/or nuts https://www.waveshare.com/poe-hat-b.htm…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
A screen holder to mount a Waveshare 7'' display to the Raspberry PI 400. Uses the bracket created by vman81 here: https://github.com/vman81/pi400-mount/ On the back you can see glued my WD SSD holder, it's available separately. What you…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes Dual display version of my “ WaveShare 4.2“ e-Paper case - symmetrical and without holes ” display case as desktop variant. It can hold up to 2 ESP32 controllers and…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Here you find another LCD Cover. It´s for an 4.3 Waveshare LCD with Raspberry Pi attached. It can be installed apart from the printer for e.g. under the Printer Encloser as I did, with 4x Wood Screws. In the pictures you see Rev. 1.…
Wydruk około 8,44 €–10,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
3D printable Lid for the Waveshare POE adapter board I have a CM-10-POE-Box, however I lost the lid. Included are 2 designs: 1. Plain 2. Home Assistant Fusion 360 design file included for easy modification. The Home Assistant model…
Wydruk około 2,51 €–3,06 € nettoWstępna wycena jednego wariantu
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
You shoul use a 4 M3x10 screws to secure a screen to the case.
This is a super slim case for the Waveshare RP2040 Zero. Just enough to protect without bulk. Hope you Like it! I wanted to have access to the buttons, USB C, and Neopixel but still protect it when I toss it in my work bag with other…
Case for 7inch Capacitive Touch Screen by Waveshare This case is designed for touch use, but still comes with a foldable stand. It also features optional clip holes that allow attachments, such as the provided pen holder (9mm diameter).…
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
📺 Raspberry Pi 5 Case for Waveshare 10.1" DSI Display (Landscape Mode) This is a custom 3D-printed case designed for the Waveshare 10.1-inch DSI touchscreen display , configured in landscape orientation . It also houses a Raspberry Pi 5…
This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…
A case that I built specifically for the OGX-Mini / Joypad OS projects, but it actually works for any usage you may have for the Waveshare RP2350-USB-A board. The model is built with very tight tolerances, so depending on your printer you…
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
Raspberry Pi5 PCIe NVMe Case for Waveshare M.2 HAT+ ****************************************************************************************** **Update 21Nov24** There was a small blemish discovered to the button recess. This has now been…
Waveshare recently released a new ESP32-S3 screen. Model name: ESP32-S3-Touch-LCD-4.3 . I'm using this screen for my openHASP installation. You can find .ini file here . I didn't have courage to do the soldering job for backlight as…
Designed a case for the Waveshare 4.3 HDMI display. https://www.waveshare.com/product/raspberry-pi/displays/4.3inch-hdmi-lcd-b.htm Case front and back are assembled without tools. 4 M3x8mm screws are used to connect the bracket. Bracket…
This is a case for waveshare ESP32S3 2.8 inch Display case. With speaker grill, screw, Memory card slot,buttons vent. https://www.waveshare.com/esp32-s3-touch-lcd-2.8.htm
I remixed the original model and made some personal improvements. add printed threads for the M3 screws increase size of the screw holes increase clearance for the Raspberry Pi 4 USB and ethernet ports change front case to mount the…
This is a case I designed for Raspberry Pi with Waveshare 4.3 inch LCD module which makes a nice setup for running OctoPrint, Klipper/etc. You will need some M3 socket head screws and nuts (DIN912) for securing the lid to the case (6x 6mm…
This is a displaymount/cover for the 5" Waveshare display. It is created to be used on Vorons. It is mounted to the Voron-Mod "BTT PITFT50 45-degree", which can be found here:…
I created this case for the Waveshare 7.9 inch touch screen in FreeCad. I used the 3d image of the screen the manufacture provided here to setup all the holes and dimensions. https://www.waveshare.com/wiki/7.9inch_HDMI_LCD#Drawing The gap…
Housing for the Raspberry 5 with the Waveshare PoE HAT (F). easy to print, no supports required needs 4 2.5mm screws to assemble, uses the bolts which come with the PoE HAT vents for good air flow access to Raspberry Pi GPIO header
Small press fit case for the Waveshare RP2040 One version of the Raspberry Pi 2040, it also fits the RP2350 One version which is identical in dimensions. Since I mainly use it for PicoKeys so I don't solder to them, I use them as a USB…
A snap-in case for the little Bjorn. Designed to be as petite as possible while not compromising on case integrity. The parts fit snuggly, however, it is relatively easy to disassemble the case if needed. The case also features vents for…
I needed a case for the higher profile waveshare PoE hat and so made this one. This was made so that the pi was completely covered while retaining access to all connections and allowing airflow. The PoE HAT model (B) case has no…
The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…
I have a number of these Waveshare 1.28inch LCD Modules that I want to build things with. This is the base piece for holding one of these screens. I've printed with PLA and PETG. Amazon Link:…
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the WaveShare CM4 IO board with PI 4 Compute Module. The case has a 40mm fan design to blow air across the top then around the side and to the bottom to cool…
Buttons and ports are easily available without the need for tools. All plugs, cables and ports fit perfectly into their slots. Designed to be screwed to a smallrig 1598 cheese plate. (optional) Make sure your printer is properly…
I modified the inlet of my USB version of this, using the CAD model provided by Waveshare. This requires the Pi be mounted separately and connected with an extended length ribbon cable. You will need to auto generate supports, as the…
7/11/2024 - Added thinner front, for those that intend to put clear plastic over After discussion with creator of Strelok ballistic software, Mr Igor Borisov. Strelok Pro is adding a feature to transfer “Target List” over to an e-paper…
This is a flat pack case for the Raspberry Pi Zero sporting the waveshare POE ethernet and USB hat. HAT in question : Waveshare POE ethernet Benefit of the case: Flat pack design Maximum airflow Has space to have a Pi Zero with headers…
A sleek, protective stand case designed specifically for the Waveshare ESP32-S3 Touch LCD 4.3" display module. Perfect for desk setups, monitoring dashboards, or any project where you want your display looking clean and professional. ✨…
I didn't find anything fitting my use-case, so I took the excellent https://www.printables.com/model/427556-ahoydtu-gehause-case-dtu-ahoy-opendtu and https://www.thingiverse.com/thing:4738646 to combine into the above and give enough…
This enclosure is designed for the Waveshare ESP32-S3 Ethernet Development Board with Waveshare PoE Module (B) included in the ESP32-S3-POE-ETH product. It includes dedicated cutouts for: The RJ45 Ethernet port All other interfaces (USB,…
Waveshare's ST3215 digital servo has a fairly complex and odd body shape. This model contains a mount that snugly fits the servo's body. The mount has holes matching the eight mounting holes on the servo for use with the self-tapping…
Description: Here's a case to house your Waveshare ESP32 C5– for my particular use case, it's running the Biscuit Node Firmware from Biscuit Shop. This is very much a work in progress and still needs some refinement. Please let me know…
Moin, hier mal ein kleines Projekt, welches ich entworfen habe. Ich wollte einen kleinen ESP32-C3 Super Mini mit einem Waveshare ePaper / e-Ink Display (2.13") kombinieren und das ganze so klein und modular wie möglich halten. Später wird…
made a mock-up for this board from Waveshare with POE-module and OV2640-camera so that I could build an enclosure around it. The enclosure can be found here Updates 2025-06-15: added LAN-LEDs and WS2812 LED locations
A small case to enclose a raspberry pi compute module with a waveshare nano b board with space to allow for a heat sink. EDIT: Requested, nano A has been added. I do not have the board myself, so feedback welcomed. The idea was to be…
I designed this case for the Geekworm X306 UPS shield. It provides constant power via a 18650 Li-Ion battery. You can plug and unplug the USB-C port on the back to charge the battery as needed, without interrupting the operation of the…
This Waveshave 4.3 inch displayholder is designed to fit perfectly onto the VORON V0.1. The skirts i used were from the VORON Trident skirt mod for the VORON V0.1. V0.1 Trident skirt mod:…
This is a case for the 11.9" widescreen by Waveshare, designed to stand at a 25° angle. It is perfect to put under a main monitor to display parameters or serve as a smaller peripheral screen. The way it is designed, the model needs to be…
This is a case for the CM 4 on a Nanobase B Carrier Board with mounted heastink. Components: Raspberry Pi CM 4 : Any variant will do Nano Base Board B : Link to Manufacturers site. Got mine from Amazon CM 4 Heatsink B : Also link to…
Raspberry 4 waveshare 5 inch display cover
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount. You will need: 8x M3x3.9x5.7 inserts (Ruthex M3) 8x M3x6 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better 50x50 mount strength, mount M4 inserts from the…
Wall mount case for 2.9" E-Paper display module from WaveShare. Case designed on wall and other surfaces which possible wiring through the surface. It's precission window over the display area of the module. You have not other mounting…
This is a partial case for the 10.1 inch HDMI LCD Touch Screen by Waveshare. (There is only the front part of the case. I did not create the back because I did not need it). Print the front case, Place the screen inside it, and screw the…
Pouzdro (stojan) pro kulatý Waveshare 2.1" displej s ESP32-S3 Tento model mi poslal Radek B. na facebook chiptron.cz - mnohokrát mu za tento model děkuji. Najdete tady dvě verze pouzdra pro kulatý displej Waveshare 2.1" s ESP32-S3. -…
I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Allows you to use the "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2"( https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m ) by Sneaks with the Waveshare Raspberry Pi Camera (I) (…
BOM: Waveshare 5" DSI screen 2 x M2 self-tapping screws 2 x M3*12 BHCS or SHCS 2 x Heatset Insers (M3x5x4) Print the 3 parts and assemble according to the images. The parts are all in the proper orientation for printing. If printing the…
The tablet i was using to control my Klipper system died. I picked up a 7 inch Waveshare LCD on amazon, linked below, and built a mount to attach it to my printer enclosure. https://www.amazon.com/dp/B096KL11X8
Below, translated into English by DeepL Gehäuse für die Ahoy DTU /Open DTU mit Waveshare 1.54 Inch E-Paper Display und Externer Antenne Die Ahoy-DTU / Open-DTU ist geeignet, um die Hoymiles PV Wechselrichter der HM Serie mit dem WLAN zu…
Casing for Raspberry Pi Zero + Waveshare LCD 1.44 - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
I created this wall mount so I could use the Waveshare 10.1DP-CAPLCD touchscreen for a home assistant dashboard. It is designed to mount to a 3-gang electrical box. Update for V2 I ended up relocating my raspberry pi out of the wall, i…
After searching everywhere there are no one that makes monitor case 7 inch waveshare for raspberry pi 3 / 4 that uses HDMI and SPI pinout this model also includes opening for monitor back button setting. the opening of pi usb & lan…
his is a pretty minor tweak of wojciechsura's excellent 7" Waveshare case (thingiverse link) for folks with a "Longrunner" (or similar) brand. The two appear to be identical, but the dimensions are slightly different and the Longrunner…
This is a simple mount to install a Waveshare 5" DSI Touchscreen to your Prusa Bear 2.1. To use it, you require: 1x Screen 1x Raspberry Pi 3B(+) or 4B 4x M3x10 screws Mount the Pi on the Screen without the standoffs. Carefully make sure…
This is a case for a Raspberry Pi 4 model B with a Waveshare UPS hat mounted on top. The Raspberry Pi can be mounted to the base plate using the M2.5 standoffs between the Raspberry Pi and the Waveshare UPS hat. The hat can then be fixed…
Display enclosure for the the 7 inch Waveshare screen. Suitable for the model with 1 x HDMI in and 1 x USB Touch USB input. Uses 4 x M3x10 screws on the back. Update 25.11.2024: Added back panel with VESA Mounting holes Added a VESA Mount
So as the summary says a simple replica of waveshare's 4.3 inch lcd with case but for pi 5. The case is almost 100% the same and it has pi5 specific features like the vent holes positioned above the active cooler module. Print Settings:…
Waveshare ESP32-P4 WiFi 6 7" Touch Display Case (Wall Mount + Desktop Stand) This is a custom-designed enclosure for the Waveshare ESP32-P4 WiFi 6 7-inch 5-Point Touch Display Development Board (1024 × 600), featuring a clean appearance,…
Built a tight case for the Waveshare 4.3" HDMI touch display and Raspberry Pi 4. I use this combination to control my i3MK3S 3D printer. Touch display is working nicely with Octodash. An axial fan (30x30x6 mm, 5V; reichelt.de part# SUN…
First i wanted to do a remix, but it seems esier to just make a new one. This is a case for 5inch Capacitive Touch Screen LCD (H) https://www.waveshare.com/5inch-hdmi-lcd-h.htm mostely used for a Klipperscreen I use this for my Reprack…
I needed to fit 3 raspberry pis into a 1u slot within the 10 inch Desk Pi cases. I also wanted to add active cooling.
Alternative Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2" You can find the Case and Buttons here: https://www.thingiverse.com/thing:4551538
Print using Supports (Everywhere) then pick open the gaps for the ports. Designed For: PI Zero 2W ETH USB Hub Hat (b) SKU: 20416 Part Number: ETH/USB HUB HAT (B) Brand: Waveshare Dedicated Aluminum Heatsink for Raspberry Pi Zero Series,…
Made a case for this screen. not Perfect but it works for me. “11.9inch Capacitive Touch Screen LCD, 320×1480”. you need some m2.5 screws (i used 8mm lenght for the case and 16mm for the legs) also you need a flat hdmi cable. and a small…
Do rámečku dostanete ePaper (e-Ink) od Waveshare i Good display s úhlopříčkou 7.5" (170.2x111.2x1.25). Tištěno bez podpěr, 0.15 mm na vrstvu (QUALITY). Záda k přední části přišroubujte šrouby M2.2x5 (otvory jsou M2), stejně tak vývojovou…
Insert for the Ikea 13x18 cm frame to accommodate a 7.5-inch Waveshare e-ink display and the dedicated ESP32, to be connected to Esphome ( or other compatible software ). The insert consists of two parts: a frame with a slot for the…
This a remix of PantsManUK's remix. The original carabiner loop was a bit choppy when trying to send off to 3D Printing Services like PCBWay, so I fixed that. Also, the NEW_LID file is actually done by formlessform @formlessform_1988521…
Designed for the Waveshare ESP32-S3 4.2" RLCD display module. Features: Precise fit for the Waveshare ESP32-S3 4.2" RLCD 70° viewing angle, ideal for placement on shelves, desks, or TV cabinets Easy access to USB connector and buttons…
A case for the waveshare 5inch touchscreen with a raspberry 4 and a super slow fan for cooling. I used this screen: https://www.amazon.de/gp/product/B08H23KB1G/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 There you can connect the…
This is a simple case for the ESP32-P4-NANO by Waveshare. I couldn't find any suitable model for download, so I created my own. It allows for access to the header pins (except for the POE one), speaker and RTC-connectors, camera and…
This is a hinged touch screen mount for the Voron 2.4. It is designed around a cheap Waveshare 4,3” Screen (), but even cheaper ones with the same dimensions should work as well. The existing displays either dont hinge or dont fit the…
This is a Waveshare USB-HUB-4U Mount for my DIN Rail Bracket. You can find the bracket here ! For the DIN Rail Bracket Mount you need M3 countersunk screws. 2023-03-16 - Pictures edited
A simple casing for the 7 inch waveshare capacitive screen. Simple screen with HDMI output. Printed with transparent PETG, 10% infill and 3 wall loops. Play with infill patterns for designs if you're using transparent filaments! Don't…
This 3D-printable enclosure is purpose-built for the Waveshare ESP32-S3 Touch LCD 4.3B development board, specifically tailored to support the Tonex One Controller project. Ideal for building a robust, portable MIDI controller or custom…
This is my case for a Pi3 based piCorePlayer using a Waveshare 7.9" touch screen and a HifiBery DIGI2 Pro HAT for music output. Focus was on flexibility of the case and not to make do with as little filament as possible. I wanted all…
This is a simple shell for your Waveshare ESP32-S3 5in Touch display that exposes all ports (USB, LEDs, buttons, switch, and MicroSD card), including the 16-position screw terminal on the bottom. It even features a “safe zone” to make it…
Link to e-ink display: https://amzn.to/4080FCH Link to really good project for using the e-ink display: https://github.com/mendhak/waveshare-epaper-display This design has a relief area below the display so it can stand straight and not…
This is a 2040 or/ and 2020 extursion mount for the Waveshare 4 inch HDMI LCD Touch Controller ( https://www.amazon.de/gp/product/B06ZZWT3N8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ). I use this case for a Raspberry Pi 3B+…
Saw the Fallout-style retro terminal design of Arthur Guy ( https://www.thingiverse.com/thing:4567037 ) & Mike Tong ( https://www.thingiverse.com/thing:4808443 ) some time ago, and felt that was very cool. So to make another one for the…
