Wyniki wyszukiwania: wind

Portable Cable Organizer / Winder

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…

USB Cable Winder Stackable (+Knurled) Print in Place

Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…

Christmas gnomes - door, window, wall decor

Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…

The Handsome Cable Organizer – Cable Winder | Large & Mini

Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…

Windmill - 100% printable - no support - no bearings - low friction - video

Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…

Door stop, window stop

Hello, Today I have a Door stop for you. It works well and holds doors or windows really well. Ideal when it is drafty. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the links are here:…

Spool Winder Remix

Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…

Wind-up Car Kit Card

Fully 3D-printable wind-up car kit! Makes a great gift.

Joycon Grip with Front-Looking LED Windows

A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…

Sunflower Windmill - Customizable System

The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…

Parametric stackable cable organizer / winder (one-way or two-way winding) with FreeCAD files

Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…

MUCH Improved Spool Winder - Helical Gears

Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…

Windmill XL - 100% printable - no support - no bearings - low friction - video

Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…

Window Stop

This is my version of a Window Stop. It works very well :) Second Version is thicker: 7mm thick arms each side and rounded corner :) Print instructions I print it with 15% infill, PETG

Ratcheting Toothpaste Winder (remix)

The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…

Apple Watch Charger Cable Winder Organizer

Update 2023-01-13: Addition of Hexa, Triangles, Circles, Plain patterns in addition to the original Voronoi Slight redesign of the overall assembly to limit the friction Other versions Regular charging cable : Same patterns, but for…

Paracord Winder

This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…

Sewing Cloth Tape Measure Winder Case 14mm and 18mm Snap Fit

Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…

Guitar string winder drill bit

A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644

3D printable wind turbine

THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 There is a more recent version that works better this easy to print wind turbine looks great on any fence post or wall, with the easy to…

Yarn Winder

The Yarn Winder is a manually operated tool for creating center-pull yarn cakes from yarn hanks. It works best together with a yarn swift (not part of this model). The goal was to design a model that requires only a few additional,…

Vertical Axis Windmill 1

I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…

Windwheel - 100% printable - no support - no bearings - low friction - video

Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Window Stopper (Stoppy)

Inspired from existing "Stoppy Stoppy" stopper available in the market.

Charging Cable Winder Organizer

Includes Hexa, Circles, Triangles and Plain patterns for extra fun. Other versions: Apple Watch charger : Same pattern but for the Apple Watch charging cables Introduction Charging Cable Winder Organizer – the perfect solution for…

Apple Watch Charger Cord Winder Case / Stand

Apple Watch Charger Case With Cord Winder. This is a Print in Place cord winding case for Apple Watch chargers. Two separate models to work with variations in Apple Watch Chargers. I have also added the gcode and 3mf files for the color…

Guitar string winder drill bit

Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.

Print-in-place cable winder "puck", no supports necessary (uses slicer trick)

Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…

Christmas Tree Window/Door Sign 2

Christmas Tree Window/Door Sign 2 Sign/decoration in the shape of a christmas tree for example, the door/front door or window. Dimensions: 132 x 170 x 4 mm --- Weihnachtsbaum-Fenster-/Türschild 2 Schild/Dekoration in Form eines…

Windscreen Ice Scraper

The provided gcode files use Prusa Slicer infill density modifiers to provide more infill towards the scraping tip to make it stronger. The new version 2 model includes ripper teeth.

RackStand / RepWinder Stand for RepBox 2.3.1+ and RepRack System

RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…

Windmill Toroidal - 100% printable - no support - no bearings - low friction - video

Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…

Wind Turbine Extruder Indicator

This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…

Air conditioner exhaust into the ventilation window for 100mm duct

I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…

Pixel Watch 2 & 3 charger with cable winder and plug mount (USB-C & USB-A)

Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.

Windmill XL Cross- 100% printable - no support - no bearings - low friction - video

Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…

Cat & mouse door/window corner

Cat & mouse door/window corner

Auto-Rewind Spool Holder for Drybox

I used to operate auto rewinder spool holders like https://www.printables.com/model/199248-narrow-double-stand-for-75mm-integrated-auto-rewin inside my dry-box. The challenge with those was that it always was kind of some fiddling with…

Guy Wire System for Spiderbeam Mast with Rope Tensioners / Winders

This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…

Windmill Wind Turbine - 100% Printable

I really liked the Windmill - 100% Printable and I also really liked the design of the Windmill Wind Turbine rotor So, I couldn't resist merging these two beautiful designs together Features Reuses original parts from both wind mills…

Spool Winder Adapter for Power Drill

When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…

Mutter M8 Gewinde

Da ich keine passenden Muttern für die Gewindestange (für eine DIY FilamentBox) hatte, hab ich mal kurz selbst welche entworfen. Am Anfang gehen die Muttern etwas schwerfällig aber wenn sie einmal drauf sind, kann man sie gut drehen. Ich…

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Wind up Helicopter

Fits on a Prusa Mini, no supports needed, print 2 propellers and assemble as in the photo, at 90 degrees to each other and with the raised centre facing down. I used PETG for its flexability. Does not hover only slows the decent down. in…

V4 3d printable wind turbine

THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 The latest version of my wind turbine. After taking feedback from some others who made the V3 I have improved this design in a few major…

ONE-FINGER TAPE MEASURE WINDER Parametric (608 BEARING required)

Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…

Wind turbine

Hello, here I have a functional wind turbine for you. There are 2 mounting options: *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will…

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Wind Powered Lighthouse with Savonius Turbine – Rotating LED Tea Light Effect

Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…

Window Mini Blind Brackets

This model was essentially copied off of a standard hanging bracket from my own mini blinds that I own. The larger holes are there to allow a drill or screwdriver to reach the smaller holes for hanging. The holes on all sides are so that…

MimimICE (scraper for your car-window or printer-bed)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Cable rewinder for fairy lights / Aufwickler für Lichterkette

After Christmas I needed a tool or winding up the cables of the fairy lights.

Dachfensteranschluss Klimagerät / Roof window duct air conditioner

Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…

filament drybox for use with filament buffer, linear track rewind mechanism, or spring hub rewind mechanism

A drybox spool holder for printing with moisture sensitive filaments which can be used: -stand-alone -with a filament buffer -with the linear track rewind mechanism -with the universal or integrated spring hub rewind mechanisms The drybox…

Halloween door, window, or wall decoration / Halloween Tür-, Fenster- oder Wanddeko

The Halloween decoration can be printed in a single color or, as in my example, in two colors. To achieve this, I paused the print before the final layers (the “Happy Halloween” lettering) and changed the filament color. - Die…

Doll House Windows

Simple basic dollhouse window model fitting a 5 by 6 cm windowsill. A perfect addition to a model house, or a play set. If there are any questions, happy to answer in the comments.

Pinwheel / Windmill (Garden / Toy) (SC)

This is a little windmill that adds a little color sport into your e.g. garden. It's mainly a 200mm x 200mm x 0.4mm flat sheet of plastic with some mounts for the bent wings and a 10mm stick. If you like this thing, you might want to…

Sisyphus Auto-Rewind Spool Holder (MM)

Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to almost three revolutions. Use two curved nuts to attach the spool to the…

One way spring A.R.S.H. (Auto-Rewind Spool Holder)

Made this remix due to the original springs, did not last long, as well as it caused problems that the spring could not keep the filament tight due to the "short" return. Two different springs have been made, one running right and one…

Movable window sill (aka. Frischluft)

Bracket for attaching a movable window sill to a window. This allows the window to be opened without removing items from the window sill. A wooden board is required, which is screwed between the two bracket angles. The design was inspired…

Guitar string winder/Klíč na struny kytary

Klíč k napínání strun při jejich výměně. Makes the job of changing strings easy. I added a little glue to make it strong

G3/4 thread to Gardena Microdrip Adapter (G3/4 Gewindeanschluss für Gardena Microdrip)

Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…

Prusa MK4 Nextruder gear window

As soon as I saw the Nextruder and the gears on the MK4 I thought it would be nice to see those during printing. So here it is! A Nextruder gear window! If you like the idea of a window, but want to use the original washer check out my…

Tape Measure Winder

Edit (2025-10-14): All models have been re-uploaded in their proper print orientations as V2. _________________________________________________________________________________________________________________________________ This is not a…

Window Controls

No special printing requirements. Standard settings can remain unchanged. You can use narrow strips of double-sided adhesive tape to attach it. Please don't just drill into the window. :p

Windshield Washer Fluid Cap

This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…

Window handle cover

Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes

You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…

Hair Curls Helix, Decorative Wind Helix,

This are some hair curl making device in 3 diffrent sizes, but if u hang them in the wind they can also make some stunning visuals, especially with clear Pla. I built this model inspired on the human protein Cell. Yeah i know it might…

einfacher Fensterhaken/simple window hook

it´s a very simple hook to use it for decoration.

Video 8 and Hi8 manual rewind

When need for manual rewind of tape

Cereal Container Drybox cheap and simple with added MANUAL REWIND function

I created this collection for the cerealbox i use ( Link ) A scound reason for this was, that i hadn't found a good drybox with a easy and robust rewind function so i had to create this. A third reason for this was, that all the dryboxes…

Smart 453 / EQ rear window spacer

A rear window spacer for the Smart (453) and the Smart EQ Fortwo. It's used to keep the rear window open a little bit, perfect for summertime. I would only drive with it if it was an EQ model, otherwise exhaust fumes may get into the car.…

Handlebar Windmill

Make your bike ride a little more fun with the small handlebar windmill. The rotor should be printed without support, the bracket lying on its side with support everywhere but block the hole. A 1,5 cm long piece of filament is used as an…

XL Spool Winder

We ordered a 10lb spool of PLA and it didn't fit on our spool holders so I designed this to accomodate our needs. The connectors are friction fit and have extremely tight tolerances (on purpose). Hope this helps someone!

IKEA Drybox Remix + Rewind

This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…

Cartoon/Disney inspired Window Decoration / Wall Art

Cute bird for window, wall or stencil art. More will come later… have fun and enjoy.

Caravan Sprite Europe window blinds holder.

In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…

Sidewinder X2 Spoolmount Stabilizer

Stabilizes the wobbly filament roll holder from Artillery. Print and clamp in between when the original filament holder is installed on the printer. If you like to replace the spool holder completely, see my newer design…

Bass/Guitar string winder

A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.

VOID Corne CRKBD Case - 6 Column (Typeractive, nice!views, nice!nanos, reset/power switch window compatible)

Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.

Portable air conditioner window extension

Portable air conditioner window extension printed in PLA+. - Inner: 190mm X 95mm X 12mm - Outer: 190mm X 100mm X 20mm If printed vertically, supports are not needed. If printed horizontally, supports are required.

Filamentbox v3 with hygrometer and imprinted window

This is the newest version of a printable filamentbox with an hygrometer, ball bearing brackets and an optional space for desiccant. This version contains gaskets which makes it as airtight as possible. The windows are made out of…

Cheese Platte 150 x 75 x 7,1 mm, 1/4", 3/8" Innen-Gewinde

Für die Montage im Bereich Foto, Kamera, Befestigung von Zusatzteilen aller Art. Diese Käseplatte wurde für die Befestigung der Verkofferung für “Custom Blackmagic Atem” entwickelt.

Long arm Hanging Universal spool re-winder (Discontinued)

This is an old design I no longer recommend. Instead I suggest this design . Why is it discontinued? Here are the main problems with rewinders of any kind: Very difficult to tune to keep working A new spool is heavier and requires more…

Abluftschlauch Klimaanlage 150/125 mit Gewinde

Reduzierstück für eine Klimaanlage/Abluftschlauch von 150er Abluft auf 125er Flansch -kann aufgeschraubt werden -Meine Klimaanlage ist von COSTWAY ……gedruckt mit PLA im Quality Mode….. ……Organische Stützen…..

BMW E36 power window switch inner piece. 61318365300

Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.

PSA : The Batlle of the AI Generated Algonquin Windigo

Battle of The AI Generated Algonquin Windego. Models received the same prompt, the same cleanup, and the relatively same amount of subdivision, displacement, and decimation in blender. They all needed a second fix in Ms3dbuilder, For…

Modular insect net frame/window

Bill of materials: PETG filament 12 M3x16 (or M3x14) screws mosquito net TPU filament (optional) superglue 2 magnets : 6x3mm Assembly instructions print the parts: assembly the rectangle frame using 4 bars and 4 corners, that snap…

Stackable ano Whistling Wind Chime No supports

Whistling Wind Chine No supports needed in my test print. spins and whistles print multiple and stack for cool visual and audible effect. place on a 100mm screw with included spacer or a rod/dowel in the ground etc. not needed but can add…

Ratcheting Toothpaste Winder (no support)

Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…

Windows 95 Start Menu Button

A replica of the Windows 95 start button. The STL model is 16 cm in the wide dimension and about 6.4 cm in the other. The black parts of the icon are 0.4 mm higher than the colored parts. I printed most of it with gray filament, switched…

Transparent Window Printing: PETG-/PVB-Composite (Proof of Concept)

Introduction Many designs like RC cars and trucks, lanterns, model houses, etc. would benefit if 3D printing could be used to create truly transparent window panes. But as you might know, FDM printing transparent filament per se does not…

K6ARK X Winder - female BNC Version

This takes the design of the K6ARK winders (which in my opinion are the best antenna wires that exist) and turns it into an X shape for use with antennas with a female BNC connectors. I made them to support my line of End fed antennas…

Yarn Cone for Yarnico's Cone winder

This was designed to work with this winder: I use the yarn winder in the highest cone position and fix it with a small tap. The other cones I used before were a little bit too small for this winder and had trouble to fit 100g of yarn.…

Bosch Cool (2000)/4000/5000 Fast & Simple Window Hose Adapter (STEP file included)

Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…

Window Bird Feeder Remix

Great original model by Whity . After printing the original version I decided to make a small modification. I moved the position of the upper suction cup mounts to allow for better viewing of the birds, and I made all the mounts a little…

Velux roof window hook accessory

If you're just a bit too short then just use the hook. Otherwise add the converter and one or two sticks to get the wanted length. The sticks may break so use at least 50% infill I think. The same for the hook. I have had both PETG and…