Wyniki wyszukiwania: winder

Sortowanie

2244 modeli

P
Printablessquinn

Portable Cable Organizer / Winder

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…

Pobrania
108 606
Polubienia
20 265
Ocena
4,79
P
PrintablesTinkrMakr

USB Cable Winder Stackable (+Knurled) Print in Place

Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…

Pobrania
23 290
Polubienia
4210
Ocena
4,44
P
PrintablesGiantBrain

The Handsome Cable Organizer – Cable Winder | Large & Mini

Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…

Pobrania
8262
Polubienia
1999
Ocena
4,46
P
PrintablesJoshua Smith

Spool Winder Remix

Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…

Pobrania
6517
Polubienia
561
Ocena
4,88
P
PrintablesSDHayes

MUCH Improved Spool Winder - Helical Gears

Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…

Pobrania
3427
Polubienia
645
Ocena
4,8

Apple Watch Charger Cable Winder Organizer

Update 2023-01-13: Addition of Hexa, Triangles, Circles, Plain patterns in addition to the original Voronoi Slight redesign of the overall assembly to limit the friction Other versions Regular charging cable : Same patterns, but for…

Pobrania
2521
Polubienia
594
Ocena
4,78
P
PrintablesTinkrMakr

Sewing Cloth Tape Measure Winder Case 14mm and 18mm Snap Fit

Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…

Pobrania
2338
Polubienia
654
Ocena
4,7
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Pobrania
2224
Polubienia
321
Ocena
4,8
P
Printablesfifindr

Ratchet Strap Winder

EDIT: the shape of the outer prongs has been modified so that they dont bind when winding. Use 6 walls + 8 bottom/top layers. A simple drill-powered tool that quickly rolls up ratchet straps, making storage much faster and keeping your…

Pobrania
1739
Polubienia
724
Ocena
4,69
P
PrintablesVerender

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Pobrania
1560
Polubienia
580
Ocena
4,88
P
PrintablesTinkrMakr

Apple Watch Charger Cord Winder Case / Stand

Apple Watch Charger Case With Cord Winder. This is a Print in Place cord winding case for Apple Watch chargers. Two separate models to work with variations in Apple Watch Chargers. I have also added the gcode and 3mf files for the color…

Pobrania
1352
Polubienia
316
Ocena
4,8

Print-in-place cable winder "puck", no supports necessary (uses slicer trick)

Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…

Pobrania
1267
Polubienia
216
Ocena
4,9
P
PrintablesFélix

Pixel Watch 2 & 3 charger with cable winder and plug mount (USB-C & USB-A)

Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.

Pobrania
901
Polubienia
150
Ocena
5
P
PrintablesSwiftyTheFox

Guy Wire System for Spiderbeam Mast with Rope Tensioners / Winders

This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…

Pobrania
700
Polubienia
94
Ocena
5
P
Printablesbuchnema

Spool Winder Adapter for Power Drill

When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…

Pobrania
631
Polubienia
86
Ocena
5
P
PrintablesSebastian

Parametric cord winder

For when you want to wind your cables without sharp bends or risk of unrolling. This is a parametic model that let's you set cable diameter, desiered length to wind and the number of turns (to set the height). The particular one uploaded…

Pobrania
563
Polubienia
280
Ocena
4
P
PrintablesRossero

Earbud Winder - Print in Place

This is a model I designed years ago to keep my cheap earbuds from tangling up in my backpack. This has been rattling around in my front pocket for years and still going strong. Just place the buds and twist away! It prints in place and…

Pobrania
541
Polubienia
93
Ocena
4,36
P
PrintablesShutter

ONE-FINGER TAPE MEASURE WINDER Parametric (608 BEARING required)

Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…

Pobrania
512
Polubienia
315
Ocena
5
P
PrintablesFélix

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Pobrania
477
Polubienia
97
Ocena
4,77
P
PrintablesJames Gurney

Fully printable rewinder for Filament Storage 2026 plus other improvements.

Introduction I love this design. It's great, but I had some issues I needed to address. Thank you to GunplaMark for making my life easy by publishing the STEP files. I've made a number of changes from the original design: The original…

Pobrania
427
Polubienia
79
Ocena
5
P
PrintablesGraswald

Cable rewinder for fairy lights / Aufwickler für Lichterkette

After Christmas I needed a tool or winding up the cables of the fairy lights.

Pobrania
388
Polubienia
38
Ocena
5
P
PrintablesIvo Slanina

Rope Winder

I needed some kind of spool which can be easily carried in backpack for my throwline (thin rope with a bag, used for tree climbing). So I designed this thing. I'm using it with 3mm and 1.9mm rope. It has one hole for attach a rope and…

Pobrania
354
Polubienia
95
Ocena
5
P
Printablesjcjames_13009

Spool (Re) Winder - Prusament Revised Edition

Design Inspired from the nice ReSpool ~ Prusament edition model designed by Jacob Kincheloe I designed my own one with Fusion 360 to use it with larger spools (up to 75mm width) and with a higher support to have more space around the…

Pobrania
330
Polubienia
82
Ocena
3,67
P
PrintablesfreakyDude

Sidewinder X2 Extruder Lever Brace with ADXL345 bracket

I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…

Pobrania
270
Polubienia
36
Ocena
5
P
Printablescftechwiz

Universal Auto-Rewinder for Rubbermaid Dry-box - Remix - split-locking axle upgrade - won't fall

This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…

Pobrania
266
Polubienia
64
Ocena
5
P
PrintablesMiKa

Uhrenbeweger || watch winder

Gerät zum ausdrucken. Steuerung zum zukaufen. Links für alle Zukaufteile hier abgelegt. Komplette Baubeschreibung im Downloadbereich. Update: Motor gibt es bei ebay nicht mehr! Möglicher Weise funktioniert dieser hier……

Pobrania
243
Polubienia
11
Ocena
0
P
PrintablesfreakyDude

Sidewinder X2 Spoolmount Stabilizer

Stabilizes the wobbly filament roll holder from Artillery. Print and clamp in between when the original filament holder is installed on the printer. If you like to replace the spool holder completely, see my newer design…

Pobrania
200
Polubienia
31
Ocena
5
P
PrintablesAlpino76

Bass/Guitar string winder

A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.

Pobrania
200
Polubienia
28
Ocena
5
P
PrintablesSteveS42

Ratcheting Toothpaste Winder (no support)

Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…

Pobrania
154
Polubienia
17
Ocena
5
P
PrintablesPeopleware

Spulenadapter für Präzisen Filamentumspuler / Spool adapter for precise filament rewinder

for English, see below Intro Mein Präsziser Filamentumspuler war ursprünglich für meine Prusameter Spulen gedacht. Mit diesen zusätzlichen Teilen könnt ihr auch andere Spulen mit ca 32 Windungen pro Lage und einem Minimal Innendruchmesser…

Pobrania
150
Polubienia
15
Ocena
5
P
PrintablesWindy

automatic rewinder spool for the upper thread

Additional spool for sewing machine automatic rewinder. Usefull tool when you have only big overlock spools but need the small ones.

Pobrania
106
Polubienia
20
Ocena
4,5
P
PrintablesTurbopstros

Ukulele string winder (Print in place)

Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…

Pobrania
96
Polubienia
15
Ocena
5

Artillery Sidewinder X1 Hemera Volcano BL Touch Mount

I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…

Pobrania
83
Polubienia
15
Ocena
0
P
Printablesgillis

String Winder Kit

Print the complete kit, including the box, Hinge together with some filament. You can also just print the crank or the handle with a winding tool. Your choice as usual. NEW! Print-in-place Box

Pobrania
69
Polubienia
21
Ocena
0
P
Printablespeko

Unwinder for shrink foil / Odvíječ smršťovací fólie

The model consists of two parts: the inner part is better to print with organic support of the upper handles (see picture). For more strength I recommend 100% filling for both parts. Print with PET-G for better flexibility. Other…

Pobrania
66
Polubienia
6
Ocena
0
P
PrintablesMoMoGoBot

YARN CONE BUTLER (FOR EEW CONE WINDER CONES)

a yarn butler for cones wound on the Electric Eel Wheel Cone Winder. takes the same bearing as the EEW 6.0 bobbin and will fit on the EEW Lazy Kate base to easily knit from. to use less filament i added modifiers to create honeycomb…

Pobrania
63
Polubienia
28
Ocena
0
P
PrintablesHonzal
Pobrania
50
Polubienia
7
Ocena
5
P
Printablesjcjames_13009

SAKATA 3D Spool Adaptor for Spool (Re) Winder - Prusament Revised Edition

Design My Spool (Re) Winder - Prusament Revised Edition → https://www.printables.com/model/244914-spool-re-winder-prusament-revised-edition was originally designed to be used with Prusament spool using a special interface As I wanted to…

Pobrania
48
Polubienia
8
Ocena
0
P
Printablesldelcour

External cable winder - no kinks - consistent winding diameter

*Currently only for 3mm diameter cable. Printed on Prusa MK4 0,4 mm nozzle 0,2 mm Quality Supports on bed enabled “Basic” - Two clips connected together “With End Holder” - Adds a small clip for easy access to the other end of your cable…

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesTim A.

More user-friendly Winder

I made a more user-friendly winder for The Cyclone Marble Machine. The main difference is thickness to make a deeper indentation. The indentation is also bigger in diameter. Underneath I also did an indentation to minimize friction…

Pobrania
40
Polubienia
4
Ocena
5
P
PrintablesAnheledir

Remix for MMU3 / MMU2S, 5 Spool auto rewinder for Repkord Repbox V2.3 with slip-rod system

You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…

Pobrania
36
Polubienia
8
Ocena
0
P
Printableskennyd1gital

Filament Dry Box Bracket for RepWinder

A bracket for using Repkord's RepWinder spool rewinder in a DIY filament dry box made from a breakfast cereal storage container . The bracket has been designed specifically for use with the cereal containers linked above, however .f3d and…

Pobrania
31
Polubienia
4
Ocena
0
P

PrintedSolid Jessie Cardboard Adapter RepWinder

Another adapter for the printed solid Jessie spools now that they are moving to cardboard spools. I didnt want to miss out on using my repwinder for the most common spools I used, so I did a ton of remixing to make this work. You…

Pobrania
28
Polubienia
7
Ocena
5
P
PrintablesKamil

Parametric Repwinder Spacer (eSun and Masterspool Presets)

The other two eSun Repwinder spacers I found on Printables did not fit my eSun Masterspool, so I created my own. The eSun Masterspool requires a 6mm spacer, while normal eSun spools require a 16mm spacer. This model is parametric, so it…

Pobrania
21
Polubienia
1
Ocena
0
P
Printablessnoty

Warn Epic Sidewinder Shackle Pin

For the Warn Epic Sidewinder shackler, you can purchase an Isolator to protect the pin from being damaged from rocks or other road debris. I was about to make one to 3d print and figured it would be nice to keep the OEM pin with my winch…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesTheAbidingOne

Webbing Reel Winder (Bandroller)

Hi this is a webbing reel to speed up your roll ups. I got the idea for the design from the image above. A drill is needed or alternatively you can design a simple handle to fit the 6mm hex shaft. The shaft and the main body is designed…

Pobrania
16
Polubienia
7
Ocena
0
P
PrintablesSean Kane

Geared Spring Alignment Hammer - for filament spool auto rewinders

This is a very simple (and almost undoubtedly overbuilt) tool for aligning the geared springs included in many filament auto-rewind systems. The measurements and sizing for the tool were explicitly based on this model but are likely to…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesMiklos Kiszely

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…

Pobrania
118 099
Polubienia
19 095
Ocena
4,68
P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Pobrania
73 187
Polubienia
11 283
Ocena
4,85
P
PrintablesDiplomator

Awesome Filament Spool Rewinder - Upgraded

UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…

Pobrania
15 361
Polubienia
2712
Ocena
4,62
P
PrintablesSTORM DESIGN

Bambu Lab Filament Spool Winder - Upgraded All Gears and Axes

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…

Pobrania
11 580
Polubienia
1097
Ocena
4,86
P
PrintablesV3 Precision

Filament Spool Winder

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for…

Pobrania
10 691
Polubienia
1640
Ocena
4,23
P
PrintablesLes Kaye

Spool Winder

Spool Winder Spool winder for filament and other spools with a maximum dimension of 210mm in diameter and 76mm wide. If the spool axle is inset then wider spools may be accommodated. Spools should be a minimum of 30mm wide with an axle…

Pobrania
9417
Polubienia
1728
Ocena
4,67
P
PrintablesSTORM DESIGN

Bambu Lab Filament Spool Winder - Upgraded

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…

Pobrania
9336
Polubienia
1238
Ocena
4,97
P
PrintablesMerlwynd

Spool Drill Winder

This is a remix of my PrintDry Pro spool adapter (which in turn was a remix of a Thingiverse design by Skrutt84: Ender 3 - Filament holder DELUXE). This winder will fit spools with center holes up to about 80mm diameter. Use with a…

Pobrania
8988
Polubienia
1153
Ocena
4,93
P
PrintablesSTORM DESIGN

Bambu Lab Filament Spool Winder - Filament Guide, Filament Guide Sled, Filament Guide Carriage and Knob M3 Heat Threaded Insert

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…

Pobrania
8985
Polubienia
663
Ocena
4,92
P
PrintablesSTORM DESIGN

Stand for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “STAND” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY…

Pobrania
8783
Polubienia
2452
Ocena
4,98
P
Printablesmrusk

Next Gen USB (and more) Cable Winder / Organizer (Print-in-Place, Multiple Sizes, Stackable)

Based on the experience with my previous remixed Advanced Stackable Print-in-Place USB Cable Winder , I found out central winding not to be optimal when it comes to thicker cables, especially modern high-quality USB-C cables. Thus, here…

Pobrania
8437
Polubienia
2278
Ocena
4,82
P
Printablesmrusk

Advanced Stackable Print-in-Place USB Cable Winder / Organizer (Multiple Sizes)

This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…

Pobrania
8007
Polubienia
1011
Ocena
4,73
P
PrintablesSTORM DESIGN

Motor Drive 2 - Modular Design for Stand - Auto-Stop Function for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “Motor Drive for Stand - Auto-Stop Function” for an amazing project " Filament Spool Switcher & Winder" Design…

Pobrania
7167
Polubienia
1434
Ocena
4,98
P
PrintablesBGDglider

3D-Printed Yarn Winder – Gear-Driven Easy-Print Edition 100% Printable

Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…

Pobrania
6607
Polubienia
2219
Ocena
4,77
P
PrintablesSTORM DESIGN

Bambu Lab - Winder Spool Frame 2 - Modular Design

This is a Remix “Winder Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 BEFORE STARTING THE PROJECT, YOU SHOULD CALIBRATE THE PRINTER AND FILAMENT AND PRINT THE…

Pobrania
6340
Polubienia
927
Ocena
4,86
P
PrintablesLuke's 3D

Portable Cable Organizer / Winder Upgraded

Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…

Pobrania
5077
Polubienia
806
Ocena
4,57
P
PrintablesSTORM DESIGN

Winder Spool Holder with Bearings - Modular Design for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…

Pobrania
4834
Polubienia
279
Ocena
4,83
P
PrintablesSTORM DESIGN

Universal Spool Centering Cone for Bambu Lab Filament Spool Switcher & Winder

This is a Remix “Spool Brake” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW…

Pobrania
4531
Polubienia
293
Ocena
4,96
P
PrintablesMarc Bresson

Parametric stackable cable organizer / winder (one-way or two-way winding) with FreeCAD files

Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…

Pobrania
4389
Polubienia
582
Ocena
4,81
P
PrintablesSTORM DESIGN

Donor Spool Holder with Bearings - Modular Design for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…

Pobrania
3954
Polubienia
232
Ocena
4,86
P
PrintablesBuildX

#0164 Mini Paracord Winders for the Pack [4 Variants]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…

Pobrania
3948
Polubienia
1549
Ocena
4,98
P
PrintablesJoshed

Stackable Cable/Cord Winder Organizer

Stackable Cable/Cord Winder Organizer These stackable cable organizers let you wind up your phone and device cables easily for storage or portability. Coming in at multiple sizes depending on the cable thickness and length you have. Keep…

Pobrania
3904
Polubienia
442
Ocena
4,87
P
PrintablesDiplomator

Filament Spool Rewinder Upgraded - Bambu Lab P1 / X1 / X1C / X1CC

Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…

Pobrania
3643
Polubienia
603
Ocena
4,84
P
Printablesschiko

Retention Clip for Pastamatic Spool Winder (Driven Spindle)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…

Pobrania
3505
Polubienia
291
Ocena
4,98
P
PrintablesGekoPrime

Strong hinge, easy latch, fast printing cable winder with parametric CAD. Print in place cable organizer or wire spool for pegboard

The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…

Pobrania
3424
Polubienia
484
Ocena
4,6
P
PrintablesSanka

MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox

This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…

Pobrania
3301
Polubienia
971
Ocena
4,95
P
PrintablesSTORM DESIGN

Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver for Winder Spool Frame 2 - Modular Design and Winder Spool Holder with Bearings - Modular Design

This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…

Pobrania
3145
Polubienia
235
Ocena
4,83
P
PrintablesBird2Brain

Filament Transfer Winder Motor Drive and Spool Adapter

Wanting to use different sources for filament, often with cardboard spools (or refills) I decided early on that I needed a filament rewinder. Not fully satisfied with existing offerings, I made my own. I didn’t want to power it by hand or…

Pobrania
2830
Polubienia
480
Ocena
4,79
P
PrintablesSteveS42

Ratcheting Toothpaste Winder (remix)

The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…

Pobrania
2671
Polubienia
593
Ocena
5
P
PrintablesAron Shroll

Fabric Flat Tape Measure Winder

This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…

Pobrania
2607
Polubienia
856
Ocena
4,86
P
PrintablesAdam

Sewing Meter Winder - print-in-place, parametric

CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…

Pobrania
2486
Polubienia
955
Ocena
4,68
P
PrintablesRepkord

RepWinder v2.14

A RepBox compatible or standalone rewinder system for Prusa MMU2 & REPLACE THE BUFFER BOX! ;) >> Non-Printable Hardware Kits Available Here >> Assembly Video Here UPDATED 2/5/22 RackStands for RepBox v2.3.1+ and RepRack are now AVAILABLE…

Pobrania
2485
Polubienia
700
Ocena
4,48
P
PrintablesPhillip

Paracord Winder

This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…

Pobrania
2428
Polubienia
679
Ocena
4,87
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Pobrania
2390
Polubienia
262
Ocena
4,89
P
PrintablesZzoyozZ

Versatile Filament Rewinder

Introducing a newly designed filament rewinder with virtually endless expansion possibilities . Main Features: Modular design for easy customization Sturdy and compact construction Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm…

Pobrania
2207
Polubienia
690
Ocena
4,83
P
Printablesfhuable

Filament Winder - Sled mods

I created this remix because I have a lot of old spools that are relatively narrow (Wanhao maybe?) . Some are 48mm and some are 50mmm wide and I wanted to use the winder for them as well. While I was editing the parts I also modified the…

Pobrania
2168
Polubienia
410
Ocena
4,73
P
Printablesbassklampfe

Guitar string winder drill bit

A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644

Pobrania
2111
Polubienia
251
Ocena
4,95
P
PrintablesKaminoKGY

Artillery Sidewinder X4 Pro & X4 Plus PrusaSlicer profiles

Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…

Pobrania
2091
Polubienia
43
Ocena
5
P
PrintablesDraxxman

Wool Winder

https://www.printables.com/model/1453503-wool-winder-upgraded-parts ^Checkout this remix, it's an upgrade over this model. This design is a work in progress. SO: "I want to buy this wool winder and yarn swift, it'll help me kit better"…

Pobrania
2083
Polubienia
539
Ocena
4,07
P
PrintablesBeta Gallagher

Cantilever Filament Spool Winder (MK2)

Back in Black! For no other reason than because I have more bulk black than white this time. This is the second revision of my canter lever filament spool winder. You can find my first version here , along with the original description,…

Pobrania
2008
Polubienia
496
Ocena
4,17
P
PrintablesHuDSoN

Filament Spool Winder - V3 Precision Remix Collection - No bearings or fittings required

I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…

Pobrania
1995
Polubienia
141
Ocena
4
P
PrintablesSmoTech 3D

Artillery Sidewinder X2 Orca Profile

I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…

Pobrania
1955
Polubienia
47
Ocena
4,33
P
PrintablesPIZZA_CAT

FISHING LINE WINDER

Simple and ergonomic fishing line winder in five versions. Since I am an avid angler, I could not help but make this device. You can choose one of the five winder options. Or print all options, as I did. Some winders are best suited for…

Pobrania
1895
Polubienia
344
Ocena
5
P
Printablescheesus

Filament spool winder

Spool winder with a hexagon spigot to fit a power drill

Pobrania
1841
Polubienia
141
Ocena
4,65
P
PrintablesMr. Cookie

Yarn Winder

The Yarn Winder is a manually operated tool for creating center-pull yarn cakes from yarn hanks. It works best together with a yarn swift (not part of this model). The goal was to design a model that requires only a few additional,…

Pobrania
1773
Polubienia
805
Ocena
5
P
PrintablesNicholas Kenyon

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…

Pobrania
1751
Polubienia
222
Ocena
5
P
PrintablesA_Balocchi

Artillery Sidewinder X1 - Prusa Slicer bed texture

I couldn't find a nice bed template for the sidewinder x1. I hope you like it.

Pobrania
1694
Polubienia
21
Ocena
0
P
Printableswarpster

Automatic Filament Rewinder (Runs on Marlin)

NOTE:2/1/23 Sorry took so long to get back to this. After a lot of testing I have come to the conclusion that a NEMA 23 stepper with an external driver is the way to go to get the torque needed to wind a full spool reliably. So, I am…

Pobrania
1613
Polubienia
508
Ocena
4,75
P
PrintablesSDHayes

Reimagined Spool Winder

UPDATE 02/08/2023: Uploaded a V3 repaired frame file as there was an issue with the V2. The Spool Winder by Les Kaye is a great model, but there were a few things I wanted to do differently, so here we go. First, I redesigned the frame to…

Pobrania
1526
Polubienia
233
Ocena
4,82
P
PrintablesRadiotbo

Artillery Sidewinder X2 Mods

When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…

Pobrania
1506
Polubienia
217
Ocena
5
P
PrintablesSD-3D

Paracord Winder

I designed this paracord winder with added holes in the handle to attach to your backpack when hiking or camping, so you always have spare paracord when needed. If you like this model, check out my Rope Tensioner, Rope Hook and Webbing…

Pobrania
1505
Polubienia
496
Ocena
4,96
P
PrintablesAdam Kimmerly

K6ARK Wire Antenna Winder

Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…

Pobrania
1489
Polubienia
141
Ocena
5
P
PrintablesRegis

USB Cable Winder Stackable

Author : TinkrMakr I changed the angle to 45° because I read in the comments that some people had problems to properly print the lower part of the model. I had the same problem, but I don’t think it came from the angle of the model but…

Pobrania
1479
Polubienia
147
Ocena
4,58