Wyniki wyszukiwania: wrench

Sortowanie

3261 modeli

P
PrintablesA_R_B

Torque Wrench Handles from 1.0Nm up to 3.0Nm

Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…

Pobrania
8898
Polubienia
3101
Ocena
4,77
P
PrintablesLumanieri

The Original R.E.P Ratchet Wrench - 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!!

Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…

Pobrania
8519
Polubienia
2173
Ocena
4,83
P
Printablesprntmkr

Bit Wrench Tool - Strong grip

Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…

Pobrania
2107
Polubienia
779
Ocena
4,92
P
PrintablesRaegin

Wrench for Logitech G27, G29, G920, G923 racing wheel

Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…

Pobrania
1652
Polubienia
239
Ocena
5
P
PrintablesNautilus Forge

IKEA SKADIS - Ratchet / Socket Wrench organizer + tools

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Pobrania
1414
Polubienia
243
Ocena
4,55
P
Printablesabeaulieu

Combo Wrench Holder Set (Pegboard compatible)

Intro If you're cursed enough to live in North America, you need two wrench sets. I like the ideas of having both sets arranged in some kind of symmetrical fashion on my wall as in the picture (therefore resulting on asymmetric holders).…

Pobrania
885
Polubienia
128
Ocena
4,88
P
Printablesso meone

esp32-cam OV2640 focus adjustment wrench tool

Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…

Pobrania
717
Polubienia
49
Ocena
4,89
P
PrintablesHD_Creator

Wrench socket for NASA space wrench

After I had printed the NASA space wrench in PETG, I realized that the wrench is actually tougher than I thought. I put a metal socket on it and it felt like it could really be able to tighten some screws. Since I needed something to…

Pobrania
476
Polubienia
98
Ocena
4,9
P
PrintablesGary

Revo Wrench

Sometimes the Revo nozzle is a little difficult to remove by hand and I didn't want to take pliers to the nice sock, so I designed this simple wrench. Please don't use it to tighten the nozzle – it isn't necessary and I don't want to make…

Pobrania
428
Polubienia
74
Ocena
4,92
P
PrintablesBombastus Hands

Hook Wrench/ Hakenschlüssel - DIN 1810 Form A

Here' a fully configurable hook wrench similar to DIN 1810 Form A . Form B would have a pin as a hook and is not contained, but Form A is ideal for 3D printing . This time the difficulty of the part needed me to use Onshape. Unlike the…

Pobrania
406
Polubienia
25
Ocena
4,67
P
PrintablesMouky

M3-M8 Schraubenschlüssel wrench

M3-M8 wrench in a short and a long (20mm longer) Version. Models are stronger then these shown on the image.

Pobrania
326
Polubienia
12
Ocena
4,5
P
PrintablesGeklatscht

Kenwood Cooking Chef Wrench

Sometimes the accessories for the Kenwood Cooking Chef (XL) are screwed too tightly. These are then somewhat unwieldy and difficult to loosen. For this I have now created a remedy with which it is easy to loosen the parts. Print…

Pobrania
231
Polubienia
34
Ocena
5
P
PrintablesSirPrintsALot

Wera Joker Wrench Hanger

Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…

Pobrania
227
Polubienia
80
Ocena
5
P
PrintablesEmkatech (Mike)

Hex Key Holder / Allen Wrench

A compact and functional holder for hex keys, optimized for the most common sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm. Each slot is clearly marked with the corresponding size, so you can quickly grab the right tool. Perfect for the…

Pobrania
200
Polubienia
36
Ocena
0
P
PrintablesJonLB

Maxtrax Pin Wrench

A simple wrench to help turn the locking pins for Maxtrax mounts. Print instructions You have two options: Use the pre-sliced G-code Slice it and use the following settings**: Print settings: 0.15mm QUALITY Filament: PETG Infill: 30%…

Pobrania
194
Polubienia
11
Ocena
0
P
Printablesapefred

E61 group head wrench (mushroom)

This is a wrench to undo your Faema E61 group head mushroom and flow restrictor/ filter mesh cap. The size is 36 mm on one end and 22 mm on the other. I used it on my Rocket Appartamento (sizes should be the same for other brands but…

Pobrania
159
Polubienia
16
Ocena
5
P
Pobrania
158
Polubienia
27
Ocena
5
P
PrintablesBooks

Finger Knob 1/4" Socket Wrench

Small quick-print socket wrench with finger-sized handle for 1/4" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…

Pobrania
149
Polubienia
33
Ocena
5
P
PrintablesBooks

Finger Knob 3/8" Socket Wrench

Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…

Pobrania
115
Polubienia
19
Ocena
5
P
PrintablesjonnieZG

20mm Flash Hider Wrench

The wrench has a nominal value of 20mm and the actual opening of 20.00mm as well. For the best results you should take into account your printer tolerances and have it properly calibrated. The wrench thickness is 7.4mm. Use 100% infill.…

Pobrania
113
Polubienia
11
Ocena
0
P
PrintablesMATTES

Flat and ring wrench holder 6-22 ; Flach- und Ringschlüsselhalter 6-22

Dies ist ein montierbarer Schlüsselhalter für Flach-Ringschlüssel in der Größe 6-22. Das Grundgestell und die Zahlen können einfach in verschiedenen Höhen mit verschiedenen Farben zur besseren Sichtbarkeit gedruckt werden. Der farbwechsel…

Pobrania
112
Polubienia
10
Ocena
0
P
PrintablesSonosus

Parametric Finger Wrench Set 5-14mm

About I needed to find a way of tightening nuts on various pieces of electronics hardware (audio jack sockets, knobs, switches, etc) and normal metal sockets were too short, scratched front panels and enclosures, and were difficult to…

Pobrania
107
Polubienia
11
Ocena
5
P
PrintablesExtrude Dude

Knipex Wrench Pliers Holder for Skadis Board

Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…

Pobrania
107
Polubienia
13
Ocena
5

HSW Ratchet wrench and socket set (5-12mm) holder

Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…

Pobrania
106
Polubienia
18
Ocena
5
P
PrintablesStefan R

Box Wrench Holder / Halter für Ringschlüssel

I tried different wrench holders and found none of them satisfying so I made my own. Fits 8 metric box wrenches and hold them in place, the right thing for my tool box or drawer. I made also a model for combination wrenches . Happy…

Pobrania
106
Polubienia
8
Ocena
0
P
Printablesfaultedlogic

Skull & Crossed Wrenches Fan Grill for Satsana Fan Duct 40mm Heatbrake Fan

I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…

Pobrania
103
Polubienia
10
Ocena
0
P
PrintablesRNeese

Combo Wrench Holder

I wanted a way to make better use of the space in my toolbox so I created this combination wrench tool holder. I left enough space between the wrenches to be able to get them out easily. The wrenches are Challenger/Proto. This is part one…

Pobrania
83
Polubienia
31
Ocena
0
P
PrintablesAndy Piper

Jolly Wrencher magnetic decoration

The Jolly Wrencher logo from Hackaday, as a magnetic badge. There is a pocket for a 5x3mm magnet on the back. Thanks to Michel for the model this is based on! I found the original difficult to print so that it had a satisfying coverage of…

Pobrania
81
Polubienia
18
Ocena
0
P
PrintablesDan

Camper RV Water Heater Drain Plug Wrench

This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…

Pobrania
75
Polubienia
13
Ocena
0
P
PrintablesTeslaactions

Adjustable wrench Print-in-Place For Mini

check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384

Pobrania
75
Polubienia
14
Ocena
0
P
PrintablesTriggl3r

Nextruder Nozzle Wrench

Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.

Pobrania
70
Polubienia
6
Ocena
4
P

No-mess oil filter wrench/socket for Fram filter PH9688

Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…

Pobrania
64
Polubienia
10
Ocena
5
P
Printablesprusader3D

Compact wrench for nut for cable gland

In fact a Fusion 365 exercise, but I had adapted it to a useful tool, at least for me. :-)

Pobrania
63
Polubienia
6
Ocena
0
P
Printablesapefred

RIC 9 mm square drive wrench and socket adapter

This is a small adapter for (nominal) 9 mm square drive latches with handles or as a socket adapter. Key features: for 9 mm square drive latches e.g. used in transportation and various other applications on the other side both variants…

Pobrania
61
Polubienia
9
Ocena
0
P
PrintablesW3

Gridfinity Icon Crowfoot Wrench Organizer SAE

Took the concept of jgremlin's design and remixed so they would fit my wrenches. The largest 4 of my wrenches didn't fit in his model, so I re-did the pockets by measuring each wrench and applying the same tolerances on each. Fitment may…

Pobrania
60
Polubienia
13
Ocena
5
P
PrintablesGdalya

Aquasana Filter Housing Replacement Wrench

I have an under-the-sink water filter whose filters need to be changed every 6 months. There are three housing with screw-on caps. They can be hard to open, so the system comes with a wrench to help you do that… …which I lost. So I…

Pobrania
59
Polubienia
5
Ocena
0
P
PrintablesBucio.Boi

Screw This! Wrench Holder

Requires: 1x Wrench or tool of your choosing 1x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 1x Screw This! single inserts: https://www.printables.com/model/522781-screw-this-single-insert

Pobrania
54
Polubienia
5
Ocena
5
P
Printablesmscalora

Yet Another Wrench Tray - 6 wrench SAE GearWrench ratcheting set

I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…

Pobrania
54
Polubienia
19
Ocena
0
P
PrintablesLU_technic

TORX WRENCH SUPPORT

Torx wrench support

Pobrania
54
Polubienia
8
Ocena
0
P
PrintablesIng. Ákos

DSLR filter wrench

DSLR filter wrench (58mm-67mm 100% work)

Pobrania
51
Polubienia
14
Ocena
0
P
Printablesdan_g

SYR Duo DFR - Water Filter Wrench/Tool

i needed a Wrench to Change the Filter Element of my Freshwater Filter. the New filter came without a Tool. This Design is based on the Orignal Purchasable Tool (2350.00.906 - 2012 and newer) Printed With esun Light PLA. Took about 1.5…

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesYosuke

Wiesemann wheel wrench case

This is a case for one of my favorite tool, a foldable wheel wrench from Wiesemann ( https://wiesemann1893.com/collections/kfz-werkzeug/products/radkreuz ). The whole length is 420mm. Therefore the case consists of 3 pieces, as Prusa i3…

Pobrania
41
Polubienia
14
Ocena
0
P
PrintablesRicky Li

Hex Bit Ratchet Wrench Tool for 1/4" (with bit storage). Llave criket para puntas de 1/4" (con almacenamiento de puntas)

Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…

Pobrania
37
Polubienia
2
Ocena
5
P
PrintablesAndy Wings

Ratchet wrench with sockets case

Ratchet wrench with sockets case, print in place

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesSW

Snowrench Filament roll mount

Bearing filament spool mount for Prusa Mk3s. I hate the swinging of the filament spools on top of the standard mount from Prusa. This mount has a bearing mounted roller where the spool rests using cheap skateboard or rollerblade bearings…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesTimetraveler

printable nozzle wrench hex socket adapter

this printable nozzle changing adapter eliminates the need for any tools or hardware to change the nozzles. It is designed to go with the Nozzle torque wrench from @G_design , but should work with any tool, that uses hex bits. It is…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesNighthawk

FrSky Switch Nut Wrench

Small wrench to tighten the switch nuts on FrSky Transmitters. Wire used is 0.03 music wire. I had to clean out the holes with a drill slightly smaller than the wire, then pressed them into the holes. For the print, I used 0.30 layer…

Pobrania
30
Polubienia
4
Ocena
5
P
Printablesodysseus31096

Nozzle Changing Wrench (Hex wrench w. nominal dimension 7mm)

This tool is essentially a wing‑nut–style wrench with a hexagonal cutout designed to fit a standard Prusa nozzle. It allows you to change your nozzle without using a traditional open‑end wrench. The main advantage over a regular wrench is…

Pobrania
26
Polubienia
9
Ocena
0
P
Printablescrashkg

Ergonomic Arbor Wrench Handles

These handles help you grip the arbor wrenches better and also protect your hands and the teeth of the blades. When you loosen the arbor nut a lot of the time it gives way suddenly and then the wrenches fly. This last time one wrench…

Pobrania
22
Polubienia
6
Ocena
0
P
Printablesjurassic73

Moen Arbor Motion Sense Wave Cartridge Wrench

Tool to tighten/loosen ring securing cartridge in a Moen Sense faucet. Mine kept loosening up and I was trying to turn in the ring with a screwdriver which didn't work so well so I designed this. Hope it helps. Hex grip for hand…

Pobrania
19
Polubienia
6
Ocena
5
P
PrintablesDVs3D

Side Pocket Remix | Stores 6" Digital Caliper and Allen Key Wrench

To a great Modular Shelving System from Layerguru, this remix retains the sidewall dimensions and a system connector, and offers a side pocket holder for storing a 6" digital caliper and an Allen Key Wrench (my design accommodates the 2.5…

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesSteveS42

New Milk Jug Wrench

These are the settings for a wrench to open new milk jugs. diameterA: 40.3 toothCountA: 45 toothHeightA: 1 toothWidthBottomA: 2 toothWidthTopA: 1.6 toothCurveA: true thicknessA: 2 diameterB: 16 toothCountB: 0 toothHeightB: 1…

Pobrania
15
Polubienia
4
Ocena
0
P
Printablesdhiltonp

Toilet Tank Gasket Wrench for Kohler Toilets, 2" pipe. 62mm across flats.

I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…

Pobrania
14
Polubienia
2
Ocena
0
P
Printablesjanjjjan

ROG pony bicicle handle bars wrench/key

This is a costume wrench for unscrewing of the cap that keeps on the handle bars on ROG pony. It works but must be printed from good materials because the little pins can break off when you try to screw it down. PLA is not good enough !!!

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesREMLURELMI

Scope Adjustment Wrench (Windage and Elevation)

I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesWeedjesus

Thermal concepts fahrenheit watercooler inner nozzle wrench

Just a wrench for the hex plastic nuts inside the water tank.

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesReelNauti850

IntelliChlor Wrench - Remix

While printing Ice Cream Man ’s IntelliChlor Wrench , one of the two outer detents was accidentally omitted. After printing a second copy in the original configuration, I discovered that the version with only one outer detent was actually…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesPeopleware

Lambdasondenschlüssel Pelletkessel / Lambda probe wrench for pellet boilers Buderus/Biotech/Sieger KOB

Nach 12 Jahren begann die Lambdasonde meines Pellet Kessels von Buderus im Betrieb davonzudriften, sie meldete während des Brennprozesses Werte von 12% bis 19% Sauerstoff, statt der geforderten 6%. Ich orderte die Original Bosch/Buderus…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesRPK

Knipex Pliers Wrench Bin / Knipex Zangenschlüssel Behälter

EN : In a fit of organisational mania—a case for an 86 03 250 10-inch combination wrench. Since my printer can’t print the part in one piece, I split it in half using PruaSlicer and added a snap-fit connection (OrcaSlicer reproduces the…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesRexPrints

ELCO Connector Wrench

I recommend 100% infill and as many perimeters as you want, as this is likely necessary to ensure it's strong enough for jobsites and gigs. I used 6 perimeters in PETG. Some ELCO Connectors have wing nuts, and this WILL NOT fit on those.…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesAutoCode3D

TrackTwist socket holder organizer 3/4" 1/2" 3/8" 1/4" drive SAE METRIC gridfinity V2 Wrench and tool organizer

Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…

Pobrania
7591
Polubienia
1818
Ocena
4,92
P
PrintablesManuel

NOZZLE WRENCH

Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…

Pobrania
6017
Polubienia
2210
Ocena
4,94
P
PrintablesDJ

Inch Measuring Tool for Screws, Nuts, Bolt Heads, Wrenches (incl. Hex.), Threads (No metric tool)

I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…

Pobrania
5299
Polubienia
2437
Ocena
4,93
P
Printablesjedisct1

Nextruder nozzle wrench for Prusa MK4, Core One and XL

On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…

Pobrania
4940
Polubienia
1015
Ocena
4,96
P
PrintablesChileo

Schraubenschlüsselhalter / Open-end wrench holder

GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…

Pobrania
4710
Polubienia
454
Ocena
4,93
P
PrintablesParsupo

wrench holder (wrench organizer)

This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.

Pobrania
4652
Polubienia
531
Ocena
4,43

Fully assembled 3D printable wrench

After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer. Now, i am not talking about a "print-several-pieces-and-then-assemble" version…

Pobrania
3954
Polubienia
232
Ocena
4,74
P
PrintablesG.design

Nozzle torque wrench

ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…

Pobrania
3604
Polubienia
916
Ocena
4,91
P
PrintablesAudacity Micro

Gridfinity 10 Piece Wrench Sorter

Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…

Pobrania
3203
Polubienia
416
Ocena
4,81
P
PrintablesViosDesigns

Gridfinity Wrench Holder System

Gridfinity Wrench Holders designed to hold full sets of Metric and SAE Wrenches. The metric wrenches are inversed to fit into a standard tool drawer. Mirror the files to get both sides. Printed in PLA+ Nozzle 0.4 Height 0.2 Infill 15%

Pobrania
3189
Polubienia
574
Ocena
4,91
P
PrintablesUncleFrankSays

UFS-094 More T-Handle Hex Allen Key Wrench

Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…

Pobrania
2952
Polubienia
551
Ocena
4,94
P
PrintablesGorgoton

Combination Wrench Organizer Set

My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…

Pobrania
2408
Polubienia
330
Ocena
4,8
P
PrintablesFantomas

MC4 & EVO2 PV solar wrench (spanner)

ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…

Pobrania
2352
Polubienia
133
Ocena
5
P

Wrench Rack

This is the Wrench Rack! This is by far the best and easiest way I've found to organize combination wrenches in your toolbox. These are all just variations on a similar theme.

Pobrania
2319
Polubienia
1003
Ocena
4,33
P
PrintablesDiggle

Print-in-Place Adjustable Wrench

Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces

Pobrania
2294
Polubienia
216
Ocena
4,8
P
Printablesstevehlau

SR Suntour Fork Wrench

I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…

Pobrania
2216
Polubienia
148
Ocena
5
P
PrintablesjohnyHV

esp32-cam OV2640 focus adjustment wrench

I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…

Pobrania
2194
Polubienia
99
Ocena
4,69
P
PrintablesMany24

IKEA Skadis - Wrench holder / Držák na klíče

Simple 2 piece holder for up to 8 wrenches, in my case for 6 - 22mm. There are 2 models, each with different hook position - offset by 20mm. This means you can put them in any column of holes on the Skadis board, depending on lenght of…

Pobrania
2130
Polubienia
408
Ocena
5
P
PrintablesStenly_G

Wrench set - 8mm-19mm

A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…

Pobrania
2104
Polubienia
454
Ocena
4,82
P
PrintablesDJ

Metric Measuring Tool for Screws, Nuts, Bolt Heads, Wrenches (incl. Hex.), Threads

I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…

Pobrania
2048
Polubienia
461
Ocena
4,92
P
PrintablesGlue Man

Modular Wrench Holder

Wrench holders slide together. I included pieces with 3 peaks and 1 peak if you need different lengths. There are also front and back pieces that only have the attachment points on one side. The magnets I used were 10x3mm magnets from…

Pobrania
1894
Polubienia
744
Ocena
5
P
Printablesgwendal

peg board wrench holder

Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.

Pobrania
1862
Polubienia
309
Ocena
4,89
P
PrintablesOndra7

Height adjustable leg with wrench adjust

Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.

Pobrania
1834
Polubienia
1168
Ocena
5
P
Printablesjonathon717

Tool Organizer - Shop Tools - Files - Cutters - Wrenches

Another basic tool organizer. Works great for deburring tools, small wrenches, screw drivers, glue sticks. You name it. The 200x100 size fits well in a lot of standard Kennedy, Craftsman, and other tool boxes. I printed mine in PLA. Any…

Pobrania
1831
Polubienia
279
Ocena
5
P
PrintablesAudacity Micro

Gridfinity Pliers and Wrench Holder

Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…

Pobrania
1680
Polubienia
247
Ocena
5
P
PrintablesMichal Fanta

The Lens Filter Wrench Set

Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771

Pobrania
1646
Polubienia
224
Ocena
4,94
P
Printablesericman314

Adjustable Pipe Wrench

Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…

Pobrania
1580
Polubienia
182
Ocena
4,95
P
PrintablesEd

"The Lamprey" Soda Bottle Cap Wrench

Introducing “The Lamprey”, a soda-bottle-cap-opening wrench! Originally made as an accessibility aid for people with arthritis or other grip issues. The design affords three hand positions - right up by the cap, in the middle of the…

Pobrania
1497
Polubienia
421
Ocena
4,7

Marked Modular Magnetic Wrench Holders

Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…

Pobrania
1419
Polubienia
172
Ocena
5
P
Printablestlisek

Removable Multiboard Allen Key / Hex Wrench Holder

A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…

Pobrania
1411
Polubienia
182
Ocena
4,93
P
PrintablesAlex R

Improved Allen Wrench / Hex Key Holder

Allen wrench holder with some improvements: Will not wear out, holds hex keys in with an o-ring, not tension in the plastic All Allen wrenches equally accessible 3D printable Uses a standard o-ring available at most any hardware stores…

Pobrania
1407
Polubienia
157
Ocena
4,89
P
PrintablesBamBam Design

Threading Tool - Tap Wrench

Threading Tool Handle A handy tool for cut and recut threads. It should fit square shaft from M2-M10 thread cutter (most inch thread as well). The square shank holders are graduated 0.5mm in one single tool. Insert 2,5-4,5mm square shaft…

Pobrania
1381
Polubienia
378
Ocena
4,85
P
PrintablesDaniel

Kids Toy: Wrench (Spanner) and Bolt Box

This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…

Pobrania
1369
Polubienia
307
Ocena
4,94

Wrench holder, HSW

A remix to mount the holder on a Honeycomb storage wall and less material. You need 2 M3 inserts and 2 M3x12mm screws.

Pobrania
1331
Polubienia
215
Ocena
4,91
P
PrintablesAlmightyFireFly

Wrench, Plier, & Scissor Organizer

I couldn't find a simple adjustable plier and wrench organizer so I designed this. It is very versatile and works well with most tool box drawers. The parts are simple and print very quickly. The height of the dividers can be scaled as…

Pobrania
1209
Polubienia
224
Ocena
4,93
P
Printablesdkshepp

AR-15 Castle Nut Wrench

AR-15 Castly Nut Wrench

Pobrania
1142
Polubienia
96
Ocena
3,83
P
PrintablesEclsnowman

Metric Allen Wrench Holder

At work we use allen wrenches (hex keys) a lot for machine assembly. The problem is people keep borrowing my allen wrench sets as we work on machines together. My work provides bulk bondhus allen keys to people so they don't use worn out…

Pobrania
1124
Polubienia
126
Ocena
5
P
PrintablesVitaly

Wrench Holder

Metric Wrench holder for 6mm - 15mm wrenches. Version with raised letters - to colour with a pen or print with a different colour. Version without letter - you can write your own letters/numbers/symbols. Base size of holder - 40x230mm…

Pobrania
1122
Polubienia
333
Ocena
5
P
PrintablesBenBreaksThings

Gridfinity Wera Hex Wrench Organizer; no magnets

Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.

Pobrania
1085
Polubienia
266
Ocena
4,17