Liczymy pasujące modele…
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
simply collar to hold a zip tie-antenna. print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert…
a battery holder for the Axial SCX10.2 rc crawler, mounts to the factory screw holes on the the chassis. meant for holding larger batteries horizontally across the transmission instead of on one side of the body. this allows for larger…
A roll cage style bar that sits inside of the lexan of the windshield on the Axial Scx10.3 CJ7. descrete and provides ample protection to keep your widnshield form getting caught on rocks and ripped off. made because my friend and i have…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
My kids have a bunch of the Bruder brand toys including the big lowbed trailer. I thought it would be fun to tow it with my Axial SCX10 RC truck. I wanted something simple that bolted on easily. I found someone had already designed the…
Temporary wheel for RC models with an outer diameter of 107 mm, designed for safe storage of the vehicle. The rim is made of PLA/PETG, and the tire is made of TPU. Features a standard 12 mm hex mount, ensuring compatibility with most RC…
This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…
Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…
Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…
This is a simple, quick print to store the Sennheiser cx150bt headset.
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…
simple tow hitch that mounts on the rear bumper mounts, and only needs an M3 screw
battery tray mounted in the front and center I printed mine in ABS, but really anything would work. I printed it with the small closed end on the bed seems to work well. You will need longer m3 bolts
Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.
The stepfile is only the left side. Just mirror the side for the other. printed without support.
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
Easy to print may require a small amount of filing to fit the ball joint in. Have fun! MRC.
Эту модель я сделал, чтобы переместить бампер ближе к кузову, так модель выглядит лучше, а также улучшает внедорожные качества. Для печати я использовал abs gf. Но вы также можете использовать abs/petg. Для большей прочности используйте…
These are bumper brackets for the Axial SCX10. Made these so that I could extend both the front and back to fit a new body. Also added stabilizers to use towards the battery holder as I had to move mine to the front. The battery holders…
this link works great with the ball bearing that you can find on printables if you type in scx10 all my links that are 1/10th uses them and in the hole with minimal filing. Printed in PLA then PETG 100% Enjoy! MRC
downsized frame from scx10 to scx24 . skid plate included I used and battery/ESC/receiver tray I put together.
This is a full back of cab for a RC4WD Mojave body and Skids that will work on an SCX10 ii or similar to mound the cab using screws there are optional brackets to mount the back using screws or you can just glue in place.
When refoaming a BeoVox CX100, you need to apply pressure to the inner and outer rim of the foam at the same time. This ring will help with applying the pressure. Print the ring, best is to print 2 per speaker so you won't have to wait…
This model is a front bumper for the FCX18 K10 and can be installed using the original hardware. I printed it in PETG-CF, but any material should work. I used a 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, and 15% infill. There are…
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
Cover up the ribs on the existing rock sliders with a slick plastic surface. will reduce hang-ups and allow the vehicle to actually slide over sharp rocks. Compatible with all versions of the SCX10iii. use 4x M3 countersink head screws…
Texts were customized with slicer, not part of the model. I also attached a small piece of electrical tape on the Airtag to prevent rubbing against the bike, and reduce vibration. f3d file included :)
Mod for the Cheerson CX10 & Hubsan Q4 mini quadcopters. The mod turns the mini quadcoptor in to a rolling RC Vehicle which looks like a sort of Star wars Tie Fight. Whether you have the CX10 or Q4 both models fly well with this mod added.…
After hosting a family members dog for a week, I was inspired to attach a handy flashlight I already had (Olight Mini 2 with a magnetic base) to the hard floor attachment (“Parquet Twister Floorhead”) of our Miele Blizzard CX1 canister…
This is a 4-link truss with servo mount for og Axial SCX10 axles. I needed it to build pass-thru axles for my 8x8 custom truck.
Trying to mimic original 4-link truss. Made one out of PETG- didn't last long. One out of PA6-GF 25 - currently in model, doing fine. One in TPU98A - in reserve.
Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.
I play a little with the thinkercat and designed a body for an Axial SCX10
Drew these up myself for ease of printing. STL is left and right. Same file is compatible with front and back. May require 180degree rotation in slicer to make it easier to print. Enjoy.
Shock extensions based on aluminum aftermarket ones. 3 files are included - the specific setup I have for front and rear, and a universal one for more adjustment options. You will need 2x M3x10 screws for each extension, so 8 total if…
Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)
Secure mount for a battery in the front of the SCX10. Uses 4x M3 screws. Sized for a 5000mAh box LiPo. I can alter the size for different batteries, just shoot me a message. The Basecamp body still fits in this configuration but I can't…
Front motor mount for injora gearbox , others should fit. Needs M3 square nuts and m3 screws. Transfer case, use parts from the SCX10 gearbox ( bearings and gears ) . M3 x 30 screws and nylocks. Grease if you want. It slows the rig down…
Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…
I tweaked the original so it would line up better on the SCX10 II, then replaced the stinger with a bull bar and tweaked the bumper to fit the frame more closely and allow better approach angle. TinkerCAD for front bumper:…
I was looking for a solution to hide the shock towers and change the battery without removing the body. Need 2x5x20mm neodymium magnets. One magnet in the lid and box (magnet_holder) is enough, otherwise it will be difficult to open.…
Quick model of clamps that are at the end of the locker cables on the FCX10 trucks. **May need some adjustment** I did not have one off the truck for measurement. Image is a cross section at the part center. Print in orientation shown for…
A wedge to raise the motor up away from the rails when using a HobbyWing Fusion with GSpeed skid plate and chassis rails. The opo named files tilt the transmission side to side while the other files tilt the transmission front to back.…
As part of our effort to upgrade our TronXY XY100 printer (also sold as an iMakr STARTT) with a Coprint system, we had to find a way to mount the CX1 modules to the printer and none of the existing bracket designs would fit here. This…
Dies ist ein 1:1 Ersatz für den DIG-Hebel aus dem Axial Ersatzteilset Dig/2-Speed Arm & Shaft Set: SCX10III (AXI232036), welches (Stand 12/2025) nicht verfügbar ist. Ich habe den Hebel aus PA6-CF gedruckt, aber ich denke, dass PETG auch…
FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…
Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…
Created a new transmitter wheel for the FCX18 LC80 since it didn't have a foam ring. This is a 2 part model, glue the hub to the wheel to give it some dimension. I also included a flat version without the hub.
Created a new transmitter wheel for the FCX18 LC80 since it didn't have a foam ring. This is a 2 part model, glue the hub to the wheel to give it some dimension. I also included a flat version without the hub.
Servo horn to use Injora 2065 servo on a SCX10 Pro. Might also be compatible for the same servo for SCX10 III DIG.
simply collar to hold a zip tie-antenna. print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert…
Flip your 10 ii kit transmission and motor forwards for the best cg! The motor flip mount fits a good range of pinions, 10-14 at least, maybe a bit lower and higher. The motor mount is pretty solid as long as you print it pretty thick, 5+…
Motor flip mount for the original scx10 transmission, A little bit thicker in design then my 10.2 style flip mount but otherwise a similar design. Should also fit 10-14 pinion, maybe a bit more and a bit less. I also mirrored my trans…
I designed this piece to work with my trans and motor flip mounts for a 10.2 kit chassis. Steering servo in stock position and a servo winch flat and as low as can fit up front on the chassis. You may have to space your servo up depending…
Add magnets to your GCM Racing J2 Skeleton Chassis with China JK body for quick and easy removal. Holds great. I also added an area for the on/off switch to go. Can be trimmed if not needed. You will need to drill 4 holes in your chassis…
I've created a GoPro Mount for my FCX10 K5 Blazer. It goes in the box and clips to the roll bars, no fasteners needed. Must remove the blazer box cap. Simple print, little support needed on the clips. I printed at 20% infill to keep it…
Looking for a clean, adjustable, and fully compatible battery tray solution for your Axial SCX10 III Coyote ? This tray is a drop-in alternative to the original Axial AXI-2999 battery tray , offering flexibility without compromises. Key…
a battery holder for the Axial SCX10.2 rc crawler, mounts to the factory screw holes on the the chassis. meant for holding larger batteries horizontally across the transmission instead of on one side of the body. this allows for larger…
A roll cage style bar that sits inside of the lexan of the windshield on the Axial Scx10.3 CJ7. descrete and provides ample protection to keep your widnshield form getting caught on rocks and ripped off. made because my friend and i have…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
My kids have a bunch of the Bruder brand toys including the big lowbed trailer. I thought it would be fun to tow it with my Axial SCX10 RC truck. I wanted something simple that bolted on easily. I found someone had already designed the…
Print 4x with the split side down and supports on. Attach to the frame rails, then install the frame rails and glue the 3d printed parts where they meet.
Temporary wheel for RC models with an outer diameter of 107 mm, designed for safe storage of the vehicle. The rim is made of PLA/PETG, and the tire is made of TPU. Features a standard 12 mm hex mount, ensuring compatibility with most RC…
Hierbei handelt es sich um ein ergonomisches Schwenklager, welches über die vier Gewinde ein Achsgewicht aufnehmen kann.
general description The chassis geometry is 100% identical to the original RC4WD Trailfinder 2 (11.2"). All mounting points, bumper mounts, body mounts, shock mounts, and leaf spring hangers are 100% RC4WD compatible. The Gearbox. Only…
general I often build crawlers with third-party links, custom links, and other rodends, and I always have problems getting the links to the exact right length. That's exactly what these tools are for. Currently only available for the TRX4…
Magnet body mounts for SCX10.3 Coyote. This let's you use the stock body post location. You will need 4 20x3 and 16 8x2 magnets. I didn't have any body posts so I used M5x25 screws and M3 set screws.
Designed a battery case for powering led lightbar on my SCX10II Deadbolt. I used standard 10mm wide micro switch ( https://ie.rs-online.com/web/p/slide-switches/7856469 ) glued to the front side. Lid is friction fitted to the case. On the…
A cover for the buttons on the FMS FCX18 remote. You will need to heat up the cover slightly to have it contour with the top of the remote. Use 1.75mm filament for the hinge. A 1.8mm drill bit may help if you can't push the filament…
It is a clip for the extra nozzles of a Miele CX1 vacuum cleaner. It clips on the end of the hose and it stays in place. It holds three nozzles. The inner diameter of the nozzles varies so it is not a very tight hold in my model. It is…
Designed a modern looking rock sliders for Axial SCX10ii Deadbolt model. It uses standard M3x6mm to attach the mount to chassis and M3x3mm to attach sliders to mounts. I printed mine with PETG material.
Remixed a tubular design bumper to fit on SCX10 chassis. Uses 4 M3x6mm screws to attach to the chassis rail. You can attach Axial buckets (from light set AX80045) to the sides of the bumper to have rear lights. The led mount is glued to…
Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.
Hi there! I created this mount for the fcx18 transmission that holds the servo responsible for changing from high, neutral and low gears. I could not find it for sale, except as a kit with motor and transmission so I decided to create it…
This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…
If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
STL VERSION RELEASED! - It is time (after 2+ years) for this model to be freed from my Patreon I grouped the three handle versions together because I couldn't stop them from laying on their side in the slicing software and it's a pain to…
the Button of a friends Turmix CX120 broke and needed to be recreated. I printed it with PETG, but as there is not much heat, maybe also PLA is sufficient.
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…
Made this for modeling up RC Crawlers, Not sure how accurate the motor mount is I think the motor sits several mm too low, but it all seems close enough to me. Found a better picture for the motor mount, I expect everything is accurate to…
This is a front bumper / grill for an scx10 hot rod build. it includes a servo mount under the grill. I haven't printed it yet to know how well it fits, but it should be good. There is a pretty good remix of this over here…
This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…
an upgrade to Ascender body mounts for SCX10 II https://www.thingiverse.com/thing:3210534 These should be more universal to different lengths of bodies. part A screws to part B, separated for strength. Bumpers can be found here…
Modified this well designed bumper platform to mount an ascender truck body to my SCX10 II. Bumpers can be found here https://www.thingiverse.com/Goodsons_Hobbies/designs The rear is a strong hinge joint and the front is a simple pinch…
Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…
A simple front bumper for a SCX10, have not tried it on a SCX10-2 as of now. You can print it without supports but it may not be optimal for the end quality. There are also holes for 2x 5mm leds.
ESC mount for the SCX10 III to mount the larger MAMBA X ESC above the micro servo. Requires 2 x M3 x 6mm Screws and uses stock holes for mounting. Print in the orientation downloaded. 5 walls 4 Top & Bottom Layers Print using PETG Print…
I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
