4582 modeli
A functional Gameboy Advanced Cartridge. Modeled in OpenSCAD. Test fit in a GBA, GBA SP, and DS Lite with Mario Kart. Print with build plate supports.
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
All printable parts for your Advanced Filtration System Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with Advanced Filtration System. All of the add-ons and community models can be found here . Print…
Wydruk około 7,02 €–8,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…
Wydruk około 4,44 €–5,42 € nettoWstępna wycena jednego wariantu
Available in both branded and unbranded versions, this case offers a protective layer in both a snug and padded variant. The padded version accommodates 1 mm EVA foam lining for added protection. To ensure a flush fit, the latches have…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
RC TATRA 805 !! Zjistil jsem že zadní ramena nesedí a bohužel se špatně nahráli, pracuji na opravě chyby, také bohužel nemám čas na zpracování návodu tak přidám alespoň nějaké fotky ze stavby v případě nejasností mě neváhejte informovat.…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
This is an improved antenna, buttons and display for this Stalker Bear Detector . With these improvements you'll find artifacts in no time! Print instructions The antenna part has quite a lot of thin parts. With FFF 3D printers it may be…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aardvark Crocodile Skull Chimes
Wydruk około 13,74 €–16,79 € nettoWstępna wycena jednego wariantu
Having troubles to print the official case? Is your built volume to small? Just wanted something fancier? Try the Open MVS advanced case! Design goals of this case exact fit for the OMVS kit to consolize a Neo Geo MV1C printable on a…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The F-111 Aardvark is a variable-sweep wing, supersonic, attack/bomber aircraft developed by General Dynamics. It entered service in 1967 in the USAF, and 1973 in the Royal Australian Air Force. With complications holding back the D…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena jednego wariantu
Display stand for DVD/Bluray case. Fits most DVD/BR-based console boxes as well (Playstation/Xbox/etc).
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
I tested the Prusa gcode generator to compare against Skreelink's gcode and the output is nearly identical. I tweaked settings to use Prusament values for PETG and PLA and turned on the Anchor Frame. The frame helps with adhesion and…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Jo Jos bazar adventure Sex Pistols. They ride bullets to help guide them.
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
The PC in the picture doesn't have a slot for a DVD reader like this, yet I still find myself using DVDs. With a SATA to USB cable, this can be hooked up to a USB port and the disks can be used at the edge of a desk. This model requires 4…
Wydruk około 7,58 €–9,27 € nettoWstępna wycena jednego wariantu
Use a PC disk drive externally with this cover
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
I want to use my Godox AD300 Pro with the Impulsfoto SMDV Innovativ softbox Speedbox Flip 24. So I created this adapter. I included the Fusion 360 files if you would like to modify it.
Wydruk około 3,22 €–3,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kryt vznikl teď o vánocích pro kamaráda, kterému se ztratil. Prodejce za něj chtěl nekřesťanské peníze a prodává ho jen s panty. A tak jsem mu jej vymodeloval a vytiskl. Třeba má někdo podobný problém. Na dílu není téměř jediná strana…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas stojanek na hry game boy, gameboy color, gameboy advance. Tisknuto bez podpor Kontaktovat pro případnou spolupráci…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This model is a replacement for the included desktop charging stand. It was designed to be wall mounted and use the original power supply. It has several parts and requires some specialized fasteners which can be found at most ACE…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine für die Adventszeit gedachte Tischdeko, gedruckt mit 15% innfill und stützen auf dem Druckbett. Über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Model Description: An insert designed to hold all the contents of the deluxe base game, Phantom Voyages, and the upgraded boss meeples in the original boxes. The Phantom voyages box holds the envelopes for the expansion, dice, overflow…
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model of Grim, from the series Grim Adventures of billy and Mandy. Printed 15% infill + Tree supports. Care with arms and staff when removing supports. This is the first time I've taken one of my blender art and turned it into a 3d print…
Wydruk około 4,43 €–5,42 € nettoWstępna wycena jednego wariantu
I redesigned the GameBoy Advance logo so that it can be used as a keychain. Two variants are available: Letters on top and letters engraved. For the engraved logo you have to tinker a little with the extrusion width to get a result with…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Advent wreath designed for tea (led) candles. When using real tea candles, I recommend printing from durable material and using only under supervision. Tested only from PLA and the shape does not deform. For candle stands, I recommend…
Wydruk około 6,99 €–8,55 € nettoWstępna wycena jednego wariantu
Ventilated Funnel - various sizes - various sizes / Odvětrávaný trychtýř - různé rozměry Explanation of the names of the parts: / vysvětlení názvu dílů: Funnel 20-110x55 20 - diameter of the thin section / průměr tenké části 110 -…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Maximize your storage with this small shelf for games, books, decorations, and DVDs that fits in the middle cubby of an Ikea Kallax 33-7/8" x 57-7/8" shelf unit! To fit on my Prusa Mini, the top shelf and bottom legs are separate pieces…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
Crystal Bowl *Advanced* This model is for advanced users only! Printing: The crystal bowl is printed with two separat perimeters. A different stl-model is used for each perimeter. The inner part object is scaled to 99,8% in x and y. It is…
Wydruk około 18,44 €–22,53 € nettoWstępna wycena jednego wariantu
Esta es una ampliación de la base de la pata de cabra de la moto KTM 390 Adventure. Sirve igualmente para la DUKE 390, no se si para otros modelos. He comprobado que las bases de la pata de cabra tienen ligeras diferencias aunque sea el…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Nummer 1 - 24 für Adventkalender. gcode mit Farbwechsel (ohne Gewähr)
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
This is a snap-in enclosure for the Pegasus Power Box Advanced. I did not use supports as it printed fine without and only resulted in a tiny amount of stringing that I shaved off afterwards.
Wydruk około 2,61 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
vodící lišta která se šroubuje do podlahy pod dveře
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
💽 Got a nice DVD / PC-Game case and want to show it in a frame or just hang it at the wall? There you go: 🖼 This piece got two 3mm diameter holes for a safe hold on your wall. Or you attach it to a additional frame and protect your…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Ersatztrichter für Kaffeemühle "Gastroback Advanced PLUS". Mich hat immer gestört, das bei dem Original-Kaffeetrichter sehr viel Kaffepulver neben dem Siebträger landet. Um dies zu vermeiden, habe ich dieses Modell entworfen, welches das…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
🥚 Introduction How does Gyro celebrate Easter? By replacing his regular steel ball with a steel egg ! For printing, there are two options: The full rotating fidget (four printed parts plus bearing and weights) A plain egg , just for…
Wydruk około 8,55 €–10,45 € nettoWstępna wycena jednego wariantu
Model pudełka na CD zrobiłem we fusion. Dopiero po wydrukowaniu oddzielnie oba moduły okazało się , że pudełka nie można połączyć z wieczkiem .....hehe wrzucam poprawiony model w całości CDs BOX v2.3mf. Uwagi proszę w komentarzach.
Wydruk około 6,29 €–7,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These clip on to 1x2 furring strips that are commonly used as budget friendly media shelves. After building one in my media closet, I decided to make moveable and customizable labels. The one pictured is for the “Action” genre; I've added…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The foot is made for rising the IKEA Nordviken dining table by 30 mm. Before attaching the foots to the table legs, the original gliders must be removed from the legs and plugged into the foots on the bottom side. Afterwards the foots can…
Wydruk około 11,02 €–13,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dále jsou nutné opěrné plíšky 2x. Do okénka příjde plexi o síle 2mm.
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
alpine climbing adventure fitness logo
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Used ScottW's filament guide as a base. After slight modifications it now can hold a LED lamp ( LEDVANCE ). Requires two M3x5.7 threaded inserts + two M3x8 screws (Prusa spares fit perfectly).
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cílem je vytvořit cedulky na označení dveří v celé budově školy. Základ tvoří obdélníková šablona z 3D tiskárny doplněná o zalaminovaný papír s nápisem z běžné barevné tiskárny.
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
Iggy : JoJo's Bizarre Adventure
Wydruk około 4,24 €–5,18 € nettoWstępna wycena jednego wariantu
This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
I’m deeply honored that my design was been nominated for the awards! Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects…
I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…
Strike fear among the Rebel starfighters with the TIE Advanced X1, most notably piloted by Darth Vader during the Battle of Yavin! An experimental variant of the mass produced TIE fighter used heavily by the Galactic Empire, it hosts an…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
English below! Eine fortschrittliche Methode zur Überprüfung der Durchflussgenauigkeit Hinweis: Es ist absolut richtig, dass die STL aus 2 Teilen besteht! Bitte einfach den Anweisungen folgen. die Kurzanleitung zu dieser Vorgehensweise…
How To Download this model Import it into Prusa Slicer and place it in the middle of the bed. Use the same Print Setting and Filament that you want to print with. Select the Extruder that you want the test to print on. Export the .gcode…
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
This design can be printed using one of the AD5X feature - Multi-Color Printing.
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
Hello! Thanks so much for being here! This project was a long time coming. I've been wanting to design a 3D printed BMO since before I started in the hobby. I poured a lot of time and effort into this project, and I'm so stoked for people…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Hydra PRO I've teamed up with a few different stores around the world offering the printed…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
I prefer this model better than the original. Lightweight, fast, & easier to read. Print: 1 Bottom layer 0.2mm layer height 1 Perimeter 0 Top layer 0 Infill Set all speeds to 100mm/s, except the first layer speed. Use your default value.…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
I bought this HysiPrui PEI build plate from Amazon for my AD5M and wanted to print the handle part. I found that the build plate was added to OrcaSlicer by FlashForge. Source:…
Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…
Дверная петля меня не устроила, так как я сломал ее, пытаясь открыть. Я разделил его на три части, и оно прекрасно работает. Теперь, если вам нужно снять дверь, это сделает всего два движения, достаточно вынуть два штифта.
It's called "Manta Ray" because I asked my kids what it looked like, and Rylee said, "it looks kind of like a manta ray." EDIT 6/19/2020: Added a "mouse ears" version. There are little circles at the ends that help hold it down. EDIT…
The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Recommend using PETG or better and at least 10% infill Hardware needed: 2 M3x16 for filament sensor 1 M4x8 2 M3x6 2 M3 brass inserts Working on some mods to the Adventurer 5M follow me for more updates :D
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Use tree supports only in green area (see photos). Print with something heat-resistant (abs, abs-gf, petg-cf, etc). Self-tapping screws for fan mount. Holes for 5x3 magnets.
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
Printed with ASA and 0.4 nozzle with 0.2 Layer height.
18/08/2022 step file uploaded New face fan cover 13/05/2022 V6/ REVO V6 heat set inserts added 1 st Big Thanks to EVA designer for this big effort and nice design for EVA 3.0 Link to EVA 3.0 HERE ! 2 version Standard E3D V6 / REVO V6…
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
printed with abs with 30% infill work great with all spool type.
All swords are sectioned for a minimum print volume of 250mm cubed. they can be scaled down if needed. will require glue and either an AMS or some painting. Visit this link for the wall rack and nameplates -…
Italiano: Ho creato questo organizer perché non ho trovato altri progetti simili per le mie stampanti (AD5X e AD5M) senza enclosure. Com'è fatto: L'organizer è diviso in due pezzi: La Staffa di supporto: Si aggancia direttamente sul retro…
**UPDATED:: 07/11/25 Attempted to add FF logo =). Loaded it as a .3mf since I added it in slicer. 07/04/25 Adjusted the fan muffler angle and depth for better fit to hot end Cut lateral piece thickness down for better clearance and…
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
