P
PrintablesMarekZCMB
Voron V0.2 deck plate cover for Kirigami mode
No support needed.
- Pobrania
- 880
- Polubienia
- 201
- Ocena
- 5
Wyniki wyszukiwania: irig
Liczymy pasujące modele…
P
Printablesdriftrotor
Voron V0 / V0.1 / V0.2 / R1 Kirigami Bed Brace + Fan
UPDATED! these have all been made stiffer! Also please note that for the illustrative purposes the kirigami frame a brace are depicted upside-down. After running the LDO Kirigami Bed Kit and loving it for over a year I found only one…
- Pobrania
- 842
- Polubienia
- 181
- Ocena
- 4,95
P
PrintablesMaple Leaf Makers
Voron V0 Kirigami Stealth Bumper
Compatible with: V0 Kirigami Bed Salad Fork / Tri-Zero / Pandora's Box anything with an extrusion to attach it to Supports the Rainbow Barf Logo LED or a Neopixel Mini Button BOM Item Qty. M3x5x4 Heatset Insert 2 M3 Hex Nut 2 M3x6 BHCS 4…
- Pobrania
- 827
- Polubienia
- 143
- Ocena
- 4,93
P
PrintablesDG
Voron V0 (V0.1) Kirigami Bed V3 Offset Nut
Use this on the V3 Kirigami bed to get the same Y offset as on the V2 and remove the back/forward wiggle which happens because there is not enough tension on the springs. It can also be used to fix the maximum offset of the V3 by putting…
- Pobrania
- 392
- Polubienia
- 58
- Ocena
- 5
P
PrintablesPNPrintwerk
Voron 0 Kirigami Bed Front with Logo
Kirigami Bed Front with insertable Voron Logo.
- Pobrania
- 374
- Polubienia
- 30
- Ocena
- 5
P
Printablesdrfish
"Kirigami" "Parachute" Model
This is pretty basic and probably has too many holes but it kinda works, so here it is. Tips for printing: I had better luck with flexible PLA than with TPU, mostly due to stringing. I'd really like to print it thinner, but I needed 3…
- Pobrania
- 313
- Polubienia
- 74
- Ocena
- 0
P
PrintablesRobert Samples
3010 fan mount for Voron 0.1/0.2 Kirigami bed
Inspired by this design , but with single 3010 for the popular kirigami bed. The model isn't pretty but it works well. It would be easier to center the fan but many people use wago connectors and this would not work so I shifted the fan…
- Pobrania
- 295
- Polubienia
- 68
- Ocena
- 4,5
P
PrintablesiKlaus
IKEA Dirigera Skådis Mount
Mount for IKEA's Dirigera Smart Home Hub attach it onto an IKEA Skådis pegboard using the T-Clip System . The Hub has a weird shape and it took me forever to come up with a printed mount that I'd actually like to look at every day and…
- Pobrania
- 274
- Polubienia
- 33
- Ocena
- 4,6
P
PrintablesMNK
Voron 0.2 Kirigami + Belted Z
See picture 2 for the adjusted Kirigami bed mount. I had it working with only 3 screws first, but made the last one possible without adding a M3 heat-insert. Just screw a M3x6 BHCS directly into the plastic. Please refer to the original…
- Pobrania
- 258
- Polubienia
- 67
- Ocena
- 5
P
PrintablesBaGooN
Kirigami Custom Stealth Bumper
It originally started as a personal custom, but due to requests, I decided to share the design. This Kirigami front bumper is characterized by its simple surface configuration. Two designs are available, LED-compatible and…
- Pobrania
- 255
- Polubienia
- 49
- Ocena
- 5
P
PrintablesGelatinousSlime
Voron V0 Kirigami Bed 4010 Blower
I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to…
- Pobrania
- 249
- Polubienia
- 74
- Ocena
- 5
P
Printablesilluminati
Minirig 3 bluetooth speaker stand
There are 2 models. One with 20 degree angle and another one with 30 degree angle. The 30 degree one is a bit bigger. Print No infill No bottom or top layers 4 wall layers
- Pobrania
- 217
- Polubienia
- 14
- Ocena
- 5
P
Printablesnhchiu
Voron V0 Kirigami Stealth Bumper for LDO kit
I prefer the look of the original Stealth Bumper than the one provided by LDO motors. It uses a LED diffuser mask to provide better light masking and also makes more contrast to the printed main body. You can print the mask in either the…
- Pobrania
- 197
- Polubienia
- 26
- Ocena
- 5
P
PrintablesBBoyd
MLok Relocation Bracket DigiRig
This fits my MLOK cage and MLok rails I designed for my radios. It will relocate a digirig via mlok nuts. Links MLok Nuts - https://www.amazon.com/dp/B0B845WY3D?ref=fed_asin_title&th=1 Related Models Icom IC-2350H Cage -…
- Pobrania
- 195
- Polubienia
- 30
- Ocena
- 0
P
Printablesgeektoybox
Kirigami Structure Example (STL/SVG)
So 3D Printy suggested somebody try to recreate an experiment he was reading about and wanted to see it printed on a MK4. I went to work and this was the result. Both STLs for printing and SVG files for cutting available. Print .2mm…
- Pobrania
- 185
- Polubienia
- 24
- Ocena
- 0
P
PrintablesArtcfox
Kirigami soft robotic gripper
I recently read about a kirigami-inspired soft robotic gripper developed at North Carolina State University, and I wanted to create an FDM 3D-printable version to play with. The full article about how it works was published in Nature:…
- Pobrania
- 166
- Polubienia
- 25
- Ocena
- 4,33
P
Printablesgrbrigsted
Kirigami bed nut block for Voron V0.2
The Kirigami frame that was included with my Formbot V0.2 kit was slightly thicker than specified, as also experienced by SrgntBallistic . This made it very difficult to install the Z nut block on the frame. After installation, the frame…
- Pobrania
- 162
- Polubienia
- 14
- Ocena
- 5
P
Printablesotavio frassao
Groot Suporte Celular IFSP-Birigui
Modelo do personagem Baby Groot da Marvel, com modificação para suporte de celular. Feito pelos alunos Bruno Messias, Otavio Frassão, Julia Monguini, Erick Almeida, Maria Eduarda, Luiz Gabriel, Igor Candil, para a matéria Desenho…
- Pobrania
- 158
- Polubienia
- 5
- Ocena
- 4
P
PrintablesMAKERTEAM®
Toy Zeppelin / Dirigible / Airship / Dropship
Just another nice toy zeppelin. Easy to print in two parts to be glued together. Looks awesome when printed in multicolor. Do not forget to download the STAND , too :-) Material: PLA Layerheight: 0.2mm Infill: 15%
- Pobrania
- 158
- Polubienia
- 18
- Ocena
- 5
P
Printablesdriftrotor
Voron V0 Kirigami Build Plate in ORCASLICER
How to add THIS to ORCASLICER This one is mostly for FUN and to Show that SWEET Kirigami build plate setup in your slicer. First download the STL provided Open OrcaSlicer In the Printer section click on the “Printer Settings” button In…
- Pobrania
- 152
- Polubienia
- 29
- Ocena
- 5
P
PrintablesPrintAgility
Brace for Kirigami Bed Voron V0.2
Hi there! When printing with higher acceleration values on the V0.2 the bed will swing up and down. To fix this I designed this brace that will stiffen up the kirigami bed carrier. In addition for a simple mount you should also reprint…
- Pobrania
- 152
- Polubienia
- 40
- Ocena
- 5
P
PrintablesMaurício Pessoa
IKEA Dirigera 10-inch Rack Mount
A 10-inch Rack Mount for the IKEA Dirigera home assistant. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Print Settings Supports:…
- Pobrania
- 150
- Polubienia
- 14
- Ocena
- 5
P
PrintablesFilip
Kirigami Bed Nut Block for V0.2
I removed hole for screw which was triggering z endstop in V0.1. The hole is not necessary anymore and was making part prone to warping and harder to print.
- Pobrania
- 146
- Polubienia
- 10
- Ocena
- 0
P
PrintablesAugustBackhaus
Kirigami Bed Fan Mount
This bracket allows you to mount a 4010 or 4020 axial fan to the underside of the Kirigami Bed to improve the heat-up time of the chamber for the Voron V0 printers. The bracket has 2 integrated Wago 221-412 mounts to allow easier wiring…
- Pobrania
- 144
- Polubienia
- 42
- Ocena
- 0
P
PrintablesUloPe
Voron 0.2 auto Z nozzle touch switch + wiper (for Kirigami bed frames)
Automatic Z calibration on Voron 0.2! This is a mount for a nozzle wiper and touch microswitch that attaches to the Kirigami bed frame on Voron 0.2 printers. It allows to use the Klipper Z calibration plugin with 0.2 printers. The nozzle…
- Pobrania
- 140
- Polubienia
- 59
- Ocena
- 0
P
Printablesnsanti
Minirig 4 Owl Case
Print one of everything, except print 2 of the center clamps and 2 sub rings. The left and right side of the case are held together like the original, with 2 M5x40 screws and 2 M5 nuts. One 5mm hole needs to be drilled into the handle for…
- Pobrania
- 140
- Polubienia
- 7
- Ocena
- 0
P
Printablesjedd
Minirig 4 Stand - Rotate as desired
Compatible with Minirig 4 (in picture) and Minirig 3 Blender model available for you to tweak (scale 1m = 1mm) Enjoy your music <3
- Pobrania
- 133
- Polubienia
- 7
- Ocena
- 5
P
PrintablesMartin Labis
Sexbolt endstop for Kirigami bed
there are two versions, hartk version with bushings (sexbolt_upper_mount, sexbolt_lower_mount, sexbolt_torso) v2.4 version with deflanged pulley (nozzle_probe_R1, R2, use sexbolt) auto z calibration should work with short klicky probe, on…
- Pobrania
- 131
- Polubienia
- 35
- Ocena
- 5
P
PrintablesPhylax
Minirig Desk Stand
Since these Minirig 3s are basically useless as portable speakers (connection issues, accidental resetting, button issues, proprietary charger, terrible app etc…) I figured I would make them perminant additions to my computer and thus…
- Pobrania
- 123
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPrintmajstr
Kirigami Rose "Filament Painting"
Kirigami rose .. picture generated by AI There are several variants of colour combinations try also new and show us your colour combos :-) ############################################################################# Red variant Print at…
- Pobrania
- 123
- Polubienia
- 38
- Ocena
- 5
P
Printablesvrzi
Voron V0.2 Kirigami wago mount 3+2 (1x 221-412 1x 221-413)
This model is remix of Kirigami LDO Breakout Mount from LDO Motion. I use it together with original part to connect thermal fuse with wago terminals and also when using ac bed heater to distribute ground wire to build plate and kirigami…
- Pobrania
- 119
- Polubienia
- 18
- Ocena
- 0
P
PrintablesAMGD
Voron V0.2 Z cover for Kirigami mode esay installation
I printed the original design by MarekZCMB and then found that because I have the R1 version of the Z endstop mount, I would need to disassemble about half of the printer to replace it I decided to remix it as a cover only, no disassembly…
- Pobrania
- 107
- Polubienia
- 20
- Ocena
- 4
P
PrintablesHugo
Irigation tubin end closure 1/2'' and 1/4''
Print solid, with 100% infill, printed mine with PLA and it's still going strong after 2 years outside. Once you have the end closure, just pass the pipe through, bend it and pass it back into the other hole. Should be easy to remove and…
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMartin Labis
Voron V0 Kirigami Bed 4010 Blower remix
divided into two parts, the M2 screws are replaced by M2 self-tapping screws supports are needed
- Pobrania
- 95
- Polubienia
- 24
- Ocena
- 4
P
PrintablesK Miller
Knomi V2 Kirigami Bed Mount - Voron0
I found the previous mounting brace at the back of the display prevented the mounting to the kirigami bed. I have adjust the hole spacing on the mount to align properly with kirigami as it was little off. No more brace either, its now a…
- Pobrania
- 91
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMarekZCMB
Chain anchor for the end link cable chain Voron V0.2 Kirigami mode
If it seems to you that the chain does not touch the vertical profile in the upper position, you can try replacing the part with a lower one. Compatible with - https://www.printables.com/model/407209-end-link-cable-chain-for-voron-v02
- Pobrania
- 89
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKI4RXJ
Digirig Mobile Mounting Clip
This part is designed to hold a Digirig Mobile radio interface device on a mounting surface with M4 screws. Functional model uses ABS filament. Print upright with short retention lug on the bottom.
- Pobrania
- 82
- Polubienia
- 7
- Ocena
- 5
P
PrintablesChris Moran
KNOMI2 Kirigami Mount
UPDATE: I noticed the Dragonburner was hitting the screen just slightly when at Y0. I added a little cutout to prevent that. I haven't printed this one yet as I like K Millers remix and may try that instead. Beware: the KNOMI 2 is 5v…
- Pobrania
- 82
- Polubienia
- 12
- Ocena
- 5
P
Printablesdbanovic
Kirigami Parachute 240mm
Inspired by the Research from Polytechnique Montréal presented here: https://www.youtube.com/watch?v=6rrDW6YIbXI
- Pobrania
- 77
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWight554
Rook 2020 MK1 Kirigami Bed Revised
This mod will get MK2 update soon-ish. It'll require some extra HW and Z motor mount to be reprinted. Extra BOM: Kirigami bed 2x M3x5x4 heat inserts 4x M2x20mm screws 4x M3x8mm screws 2x M3 nuts 2x M2 4mm heat inserts or 2x M2 nuts (both…
- Pobrania
- 76
- Polubienia
- 25
- Ocena
- 5
P
Printablesvwagner
Voron Zero 5015 Bed Fan for Kirigami bed
Before you print: Make sure you have enough space between the kirigami bracket and the bottom panel of the camber: Place your 5015 blower on the bottom panel Move the bed all the way down The blower should be able to move freely The…
- Pobrania
- 75
- Polubienia
- 20
- Ocena
- 5
P
PrintablesQuinn
Keep off the Dirigible Plums Garden Sign
225 mm wide sign "Keep off the Dirigible Plums" for placement in landscaping or garden.
- Pobrania
- 71
- Polubienia
- 17
- Ocena
- 0
P
PrintablesMagicShrimp
V0 Kirigami Bed Spacer (smaller)
Bed spacer for the V0 Kirigami bed mod. Allows you to line the bed up to the front or rear of the frame.
- Pobrania
- 67
- Polubienia
- 7
- Ocena
- 0
P
PrintablesOrdinaryWonder
Voron V0.2 Kirigami Stealth Nut Block Reenforced
I fought with my bed binding for a long time before I figured out it was because the T-nut mounting screws had slid into the spring in the backlash nut. Downsides christophmuellerorg's original design is excellent. The extra space on the…
- Pobrania
- 67
- Polubienia
- 8
- Ocena
- 5
P
PrintablesKayayksl
Bloons TD6 Dark Dirigible Titan D.D.T.
This is a reupload of the model D.D.T. bloon from Bloons TD6 game made by Gabriella Pereyra. I don't take any credit for this model and thanks to this maker for making this model. original model :…
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRobert Babb
Digirig 891a mount for XTenna Ft-891 rails
A Mount for the Ft 891 Digirig to attach to the Xtenna side protection rails
- Pobrania
- 45
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGhoostknight
MiniRig 4 Resonance Clamp with Horizontal Stand
Clamp for the MiniRig 4 which reduces enclosure vibrations and can act as an horizontal stand
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
PrintablesA.Dimitrov
3/4" to 4.6mm Gardena micro drip iriggation
Converts 3/4" pipe to 5mm hose adapter for micro drip systems I am using a fountain pump to water my plants with 4.6mm micro drip hose. Print straight up without support at 0.2mm layer height
- Pobrania
- 42
- Polubienia
- 6
- Ocena
- 0
P
Printablestseh
MINIRIG 3 | Wallmount / Holder
As i mainly use my MINIRIG 3 sitting in a shelf i wanted to face the speaker forwards to point it towards the room, as this directs the sound better and significantly improves the listening experience. Sound will be much less muddled when…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
Printablesandyroo770
Minirig Speaker Housing (fits minirig 3).
3MF file provided. You must separate the model into the 2 parts and orient for printing (body face down, back plate place on the large flat surface). Recommend 3+ perimeters, 0.24mm layer height, 60% lightning infill.
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSMA GTO
ROOK 2020 KIRIGAMI BED MOD
Description: This mod if for a rook 2020 printer designed by rolohaun, had a kirigami bed laying around and wanted to intall it in my new rook 2020 build but couldn't find any mods so I desinged one from scratch inspired by the rook…
- Pobrania
- 40
- Polubienia
- 16
- Ocena
- 4
P
PrintablesJim Conner
Digirig attachment for the Apache 1800 Grill Insert
I am making a small ham radio digital go box using the grill insert. This is what I am using to attach the Digirig
- Pobrania
- 37
- Polubienia
- 9
- Ocena
- 5
P
PrintablesBicyclerepairGM
IKEA Dirigera Multiboard Mount
Since we had a Multiboard Wall mount we wanted to fit our dirigera hub on our mount as well.
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMaRo
IKEA Dirigera Hub Underneath Furniture Mount
it has 3 holes for screws you can slide the hub in afterwards
- Pobrania
- 32
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSMA GTO
ROOK 2020 drag chain Kirigami bed
Needed a Drag chain for my ROOK 2020, and remixed this one I have used it in other builds, and I worked flawlessly, Needed to be smaller and have more of a turn radius since it would be used for the y axis to house the heated bed wires,…
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBuckaroo Banzai
FLEXIRIG lite – Flexible rig system for compact cameras and action cams
FLEXIRIG lite is a universal, flexible, stable, and lightweight rig system that can be quickly adapted to the requirements of a video project. The Challenge: The selection of camera cages, rig systems, and compatible accessories available…
- Pobrania
- 30
- Polubienia
- 23
- Ocena
- 0
P
Printableslolthekidison
Mgn9c Kirigami Adpater
Extrusion length same as the rest of your Z extrusions. x2 - Mgn9c, Length 50mm shorter than Z extrusions. x4 - M2 or M2.5 heat inserts x4 - M2 or M2.5 8mm SH x6 - M3 heat inserts x8 - M3x6mm BH x4 - M3x12mm - 16mm BH x2 - M3x8mm BH Only…
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSimonp1080
Kirigami for Rook2020 v2
Please read before downloading: You will need to permanently modify a kirigami bed holder (voids waranty) Please use another design if you don't want to permanently modify your kirigami Stuff needed: Part Name Amount Required Printable?…
- Pobrania
- 28
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMatszwe02
voron Kirigami 4010 blower
Remix of a great design, but that required M2.5 inserts. Now M2.5 bolts screw into ABS.
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDm3d
"Modern Tethered Airship - Dirigible Concept"
Modern Tethered Airship Concept This is an original concept model of a tethered dirigible (airship) designed for high-altitude wind energy generation. The airship stays in the air and uses wind to produce electricity, which is transmitted…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGustavo Leguizamon
SOPORTE DE APOYO VALIJA SEMIRIGIDA
ES UN REPUESTO PARA UN SOPORTE DE LA VALIJA QUE SE ROMPIO, ECHO A MEDIDA, CALZO PERFECTAMENTE. YO LO IMPRIMI CON SOPORTES, CON PLA, SE PUEDE IMPRIMIR CON PLA MAX.
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBuckaroo Banzai
FLEXIRIG HD (Heavy Duty) – Flexible rig system for DSLR and mirrorless video cameras
Please scroll to the bottom of the post for update information. FLEXIRIG HD (HeavyDuty) is a universal, flexible, stable, and lightweight rig system that can be quickly adapted to the requirements of a Run-and-Gun- / Event-Shooter and any…
- Pobrania
- 22
- Polubienia
- 16
- Ocena
- 0
P
Printableslukie80de
Voron v0 Kirigami brace with 40mm fan
Description I liked the idea of a Kirigami bed brace with a fan mount. However, I have only a 40mm fan left and I also have the Formbot Kit which has no PCB or Wago mounts. So I designed my own. I used the model by driftrotor as…
- Pobrania
- 19
- Polubienia
- 8
- Ocena
- 5
P
Printablesjoshcook
Phillips Hue & IKEA DIRIGERA hub 10" Rack Mount
This is a mount for holding the IKEA DIRIGERA Smart home Hub and the Phillips Hue Hub in a 10" server rack
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSimonp1080
LEGACY - kirigami bed for Mythoscale/rook2020
Modified to work with Mythoscale and Rook 2020 (non mk1) New version is avalible
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 0
P
PrintablesATARAXIA MECHANICA
ADXL mount for Voron 0 Kirigami bed
Unscrew the front of the Kirigami bed and install this. Shouldn't crash ADXL into bottom extrusion even when installed upside down. How to tune your printer with this model:…
- Pobrania
- 19
- Polubienia
- 7
- Ocena
- 0
P
Printableslolthekidison
Kirigami Bed Remix
Modded Rook 2020 MK1 Kirigami Bed - by Wight554 Wight_Adapter_Heat_Inserts is based off the original model adding. x2 - M3 x 5mm heat inserts, x2 - M3 x 6mm bolts BeltClip needs to be mirrored. CableChainTop creates clearance for the…
- Pobrania
- 16
- Polubienia
- 5
- Ocena
- 0
P
Printableslhbru
Z-Axis Homing Switch Contact for LDO Voron 0.2 with Kirigami Bed
The z-axis switch on my newly built LDO Voron 0.2 kit wasn't reliably activated during homing moves. I tried adjusting the location of the switch but couldn't find a location that delivered reliable homing. I also tried replacing the…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPoesia3D
DIRIGIBLE-ZEPPELIN "POETA 2"
Es un dirigible, cuatrimotor, inspirado en la clase "Zeppelin" pero de diseño propio. Se presenta en una peana para su mejor exhibición. El archivo ZIP contiene dos archivos STL, uno correspondiente al aparato y otro a la peana. Tamaño:…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesАлександр Шапошников
KNOMI2 Kirigami Bed mount
I am really like how the GunplaMarks' frame looks but cannot design it by myself so just took his design and made some adjustments. Slightly changed the KNOMI frame to fit on Kirigami Bed without touching the lower extrusion, front door…
- Pobrania
- 9
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFei Ye
Voron 0 Kirigami + 20mm Clamping-On Shaft Coupler Offset
Forward+2mm to prevent friction and compression of aluminum profiles
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBrady Candell
iRig Pro Duo Holder - no supports
The iRig Pro Duo slides cleanly into this holder, with no switches or ports obstructed. The lug on the back fits the universal lugs used by Go Pro, DJI, and many others. This was designed to be printed without supports, and the lugs are…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTuxosaurus
iRig Pro (2017) simple case
The iRig Pro I bought in 2017, an audio interface for Apple devices, is covered in that rubber material that gets sticky
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEra
Kirigami Bed Brace: 2x Wago+3010 Fan Configuration
Kirigami Bed Brace: 2x Wago+3010 Fan Configuration BOM: 2 off M3 x 10 (for fixing to the Nut Block) 4 off M3 x 6 (for fixing the Kirigami down the long sides) 4 off M3 x 14 (fan mounting)/2 off M3 x 14 & 2 off M3 x 16 (cable guide+fan…
- Pobrania
- 6
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSabre19
FT EMS - Cable Duct Cover w Kirigami UFO Frame PCB
This is a modified FT EMS V2 cable duct cover for the Voron 0.2. This one accommodates the Kirigami UFO Frame PCB.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEzekiel Hirshhorn
Voron 0.2 Kirigami Bed ***No Inserts*** (WIP)
I ordered 3 Voron 0.2 kits from Siboor. After assembling the first I realized I really don't like inhaling all those styrene fumes when heat-inserting heat-inserts, so I desided to try to do the next two with no heat-inserts. After all, I…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Minirig Desk Stand
Since these Minirig 3s are basically useless as portable speakers (connection issues, accidental resetting, button issues, proprietary charger, terrible app etc…) I figured I would make them perminant additions to my computer and thus…
P
Printables
Digirig Mobile Mounting Clip
This part is designed to hold a Digirig Mobile radio interface device on a mounting surface with M4 screws. Functional model uses ABS filament. Print upright with short retention lug on the bottom.
P
Printables
corne KunaiRight_repair
Hey, i just mirror flipped your model in order to have the righthand side so the people doesn't have to
P
Printables
"Disappearing" folding desk lamp. Kirigami.
Only 4 mm - this is the thickness of this table lamp when folded. I designed this lamp specifically so that when its light is not needed, the lamp does not take up space on the table and "disappears". Aluminum radiator plate for LED strip…
P
Printables
HSW remix IKEA Dirigera Skådis Mount
This model is a Honeycomb Storage Wall compatible mount for the Ikea smart home hub, the IKEA Dirigera
P
PrintablesJulian Danzer
Ao No Exorcist Shura Kirigakure Fang Sword
A 3d-printable model of the sword Fang used by Shura Kirigakure from the anime Ao no Exorcist or Blue Exorcist This includes a full model of the sword as well as one split into 6 parts for assembly using 4mm support rods
- Polubienia
- 1
- Ocena
- 0
P
Printables
steampunk dirigible
Take to the Skies with a High-Detailed Steampunk Dirigible! Immerse yourself in the world of steampunk with this meticulously designed 3D model of a dirigible. Perfect for enthusiasts and hobbyists alike, this model is a blend of…
P
Printables
DIRIGIBLE-ZEPPELIN "POETA 2"
Es un dirigible, cuatrimotor, inspirado en la clase "Zeppelin" pero de diseño propio. Se presenta en una peana para su mejor exhibición. El archivo ZIP contiene dos archivos STL, uno correspondiente al aparato y otro a la peana. Tamaño:…
P
Printables
V0 Kirigami Lazy Bed Fan
A bed fan that can be easily screwed under the Kirigami bed without having to dismantle the bed. Required parts: 1 x 3030 fan 4x BHCS M3x12 2x BHCS M3x12 or 16, alternatively also SHCS 1x M3 insert
P
Printables
Skadis Dirigera
A simple holder designed to mount an IKEA DIRIGERA smart hub onto an IKEA SKÅDIS pegboard.
P
Printables
Voron 0.2 Kirigami EBB36 mounts
The Bigtreetech EBB36 can bus board is normally intended to be used on the extruder. However it also fits pretty nicely into the cutout of the Kirigami sheet metal bed mount. This are two small support brackets that attach to two of the…
P
Printables
Voron V0 Kirigami Belted Z mount incl. endstop screw
I combined the belt mount from MNK with the design and end stop screw mount from the original Kirigami Mount. Mounts with 3 M3 Headset inserts and 4 M3x6 screws. The fourth screw screws directly into plastic. (same as the mount from MNK).…
P
Printables
SKIRIG
i made this model to hang my skies (small apartment). it uses two angles in order to relief most of stress from the edges.
P
Printables
Kirigami style Rose "Filament Painting"
🖼 Kirigami style Rose "Filament Painting" 🖼 ℹ Kirigami style rose generated by AI. Picure size 10x15cm 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm 🎨 Materials: PLA…
