Liczymy pasujące modele…
Cleaned and prepared using Houdini Detached fangs so the orientation can be optimal. 3dmf with what I think is a good orientation and setup (worked for me). Printed on an X1C, a textured plate, eSun PLA+ White Bone. "Sabertoothed Cat…
Remixed from @HarpreetSing_2603563 with toothed jaws for better grip.
Saber-Toothed Cat Skull by MakerBot from Thingiverse. https://www.thingiverse.com/thing:472463 I prefer tree support for the head, with a layer height of 0.2mm.
** Updated 10/18/26 to add OEM Y-Axis tensioner housing model in Stock Parts ** I did not like the stretchy generic GT2 belts that came with the Neptune 3 Pro, so I set out to replace them with genuine Gates GT2 belts. Since I was going…
This is a life-sized Saber-toothed cat skull. The model came from Sketchfab, and is the scan of a cast of a real fossil. I took the model and separated the mandible and cranium, then split each of them into two pieces for easier printing.…
An adult sized headband with comb teeth - The teeth should point towards the back of the head. Push headband in your hair starting from the forehead. I modelled this after my old headband with slight modifications. I printed it in silk…
This is a remix that is based on "Parametric Pulley for toothed belts in OpenSCAD" which in turn is a remix of many others. The previous remix added the insertion of a hexagon bolt head, while this version focuses on the insertion of a…
This model is compatible with the lego system.
I have made planetary gears with 4-toothed planet gears… I have made them with 3-toothed planet gears… (see my collection ) and now with planet gears that have only 2 teeth! Their movement in perfect unison is quite mesmerizing to watch.…
New improved version out now! What do these blocks do? They allow the use of toothed idlers that will drastically reduce belt pitch vfa Can reduce rattling noise on fast accelerations (seems to depend on material used for printing) Easy…
I needed more toe-clamps for my CNC table. The ones that came with it are injection molded using some variant of PA15-GF (Nylon with glass fibers). This is a good choice, but I still have some Prusament PC-CF. This is a stronger material…
Couldn't find any 40t toothed idlers, and the other models I found didn't seem to have a good grip on the belt so I made these. The 4mm bore ones are made to fit 2x F624ZZ Flanged Ball Bearing. The 8mm bore ones are made to fit 2x F688ZZ…
This replaces the smooth pulleys where the belt teeth instead of the smooth back run against them. Motion is smoother and quieter than before with these. I couldn't find a commercial with the right dimensions, so I made my own. I printed…
This is a direct replacement for the original Elegoo Neptune 3 Pro X/Y axis tensioner pulley mounts to upgrade to toothed idler wheels. It follows the original design so it can be installed behind the stock covers without interference.…
In an attempt to reduce print artifacts, I'm wanted to try using a toothed idler with the Core One. I remixed the XY carriage to be able to accommodate the toothed idler which has a slightly thicker width This takes 2x Gates 2GT toothed…
This is a Remix of MakerBot's Saber-Toothed Cat Skull: https://www.thingiverse.com/thing:472463 I have modified it by dividing the skull into sections so when you put all the pieces together you have a life size Smilodon (Saber-Toothed…
X5SA Pro pulley supports for toothed idlers. Includes support at the top of each bolt so that the idlers can run freely. It is designed to work with idlers ~8.6mm across. Print 2 x 2.6mm spacers and 4 x 1.6mm spacers. Print a normal and…
OBSOLETE Has been replaced by: Parametric Pulley for toothed belts in OpenSCAD revisited Update Dec 19, 2018 : An updated parametric pulley with even more functionality (to include metal flange cylinders) can be found at Parametric Pulley…
Elegant display stand for the MakerBot Saber-Toothed Cat skull. There are .stl and .step files for both the base and the bar which are printed as separate pieces and just fit together without glue or anything. I have also included a copy…
Wide toothed comb with wider teeth for that flow~. Print upright for smoother finish May need to print with brim if issues with bed adhesion Printed at 0.2mm layer height with 0.4mm nozzle, PLA
Overview These replacement x-end-idler and y-idler parts have an extra 1mm of spacing to allow for 10mm wide toothed idlers to replace the Prusa supplied 9mm wide smooth idlers. Specifically, this remix was made to allow the use of…
A new 3D figurine generated by AI, a Smilodon (Saber-Toothed Cat). Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models then come follow and support me on Patreon - where you'll get access to exclusive models. This is an Ebonclaw from Turn of Fortune's Wheel.…
BEWARE! Preform at your own risk, you take full responsibility for your printer and actions. This modification WILL damage your printer if not installed correctly. Please be careful. Suggest print in PETG at .16 or higher with .4 or lower…
New improved version of my runice idler gantry blocks! there are quite a lot of improvements and some drawbacks: Compatible with full Centauri / Carbon 1/2 lineup stiffer assembly one piece design less hardware F695 bearing stacks instead…
w huson's toothed idler pulley x-end-idler modifications (based on R1 revision) merged with the official R2 revision. The changes between R1 and R2 are mostly cosmetical (chamfers added/increased for the rods and some of the square nut…
Info Want to give your SV06 all the printable upgrades but cannot find the toothed idlers? Now here you have them This is for those that want to try to reduce VFAs, potentially caused by the 2mm interval of the toothed belt running on a…
For my LGB model railway I had to make some rack railway sections, but the original coupling hooks will detach, because the toothed racks will lift the downward part of the hook, so the carriages likely will detach, just very similar to…
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
When you like to use toothed pulleys instead of the provided smooth pulleys. This remix uses a GT2 Pulley 6 mm belt | 20 teeth | 3 mm axis pulley. Pulley axis position and gap width have been adjusted for belt path an pulley size
Alternate Base for the Saber-Toothed Tiger to match the T-Rex base found here: https://www.thingiverse.com/thing:308335 Two versions of the base are included, one is a single piece and the other has the plate as a separate piece. Print…
I really like this Y axis overhaul, and I even bought a toothed pulley according to the instructions; however alas, in my country the one I was able to source was much slimmer than what the model was made for, so I remixed the Tension…
A new 3D figurine generated by AI, a Smilodon (Saber-Toothed Cat). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of…
This is my entry to the "Let there be light!" Prusa contest. It was made in collaboration with my brother, who will also participate in this contest with his take on this lamp which will use an IKEA LEDBERG lamp if you dont want to use a…
This part is to replace one side of the adjustable plastic clamp that holds the canopy at different angles. The flat adjusting turn knob on the bolt that goes through, can be loosened and tightened against this part to allow the canopy…
Remixed this holder to hold a 10mm wide idler pulley. Use of this idler helps minimize belt ripple in your prints. https://www.filastruder.com/collections/hardware/products/gates-2gt-idler?variant=41017736724551 Gates 2GT Idler Toothed…
Large gear with internal teeth, 20° degree pitch, step file included Please leave me a “Like”. Thanks for downloading <3
What is it? This modern Toothed Doorstop is a great addition to any room and can fit in anywhere with its sleek modern design. Where else can you access this model and others? This model is also available on our Patreon as well as many…
VOLVO 2.4 D5 TOOTHED BELT TIMING LOCK Crankshaft locking pin OEM 999 7005 Camshaft locking pin OEM 999 7007
There are quite of few remixes of the HyperCube XY Joiner but I couldn't find one with the following features: Dual LM8UU Bearings (also IGUS RJUM-01-08 Bearings 2-3-2018) 8 mm X axis, 8 mm bearing Y axis Toothed Pulley mounts Integrated…
Attention: This ist for the old O-Rings! I will make new Version for the new O-Rings soon. This is a remix from @racerethan ( Prusa XL Left and Right Carriage With Gates 20t Idlers 3mm von racerethan | Kostenloses STL-Modell herunterladen…
havent printed yet Print instructions Category: Models Print Settings Supports: Yes Notes: its gonna need support. Havent printed it yet
Toothed foot for the POTA 20 Mast to help with stability on the bottom. I added a drop of CA glue on the bottom of the POTA 20 to help retain the foot during transport Printed in ABS with 100% infill and standard supports
For using Formbot kit with stock idlers (not BFZ)
These toothed idlers actually did absolutely noting . The test benchy came out completely indistinguishable from the non-toothed idlers. The non-toothed flanged bearing is also much stronger, 100% metal, is able to take more torque, and…
These revised rear idlers that allow for the use of toothed idlers in lieu of the smooth 695 bearings from the BOM. NOTE THAT THE BOM TOOTHED IDLERS FROM THE XY JOINTS WILL NOT WORK. The thick flange does not allow room for a washer…
You can't really use the cnc belt teeth, as the belt needs to be in front in an mgn9 setup. I use these in addition to the metal clamp provided with the cnc toolhead carriage.
Amazon 20T m4 pulley I printed with a 0.4mm nozzle, it's pretty small features for the cheap pulley. I'm unimpressed with the results, but it works and it was made fast. Consider remixing and improving, all the files are there. Print…
The original improved Y axis belt tensioner is great but only works with the smooth idler shipped with the Mk4 because the genuine Gates toothed idler is 1mm wider. This modification increases the width of the idler cavity from 10mm to…
I know it probably doesn't matter, but I don't like the profile of a belt running on a smooth idler so I really liked the ATARAXIA MECHANICA remix. Slicer support have come a long way so I remove the support material and used tree/organic…
Toto je jednoduchý model zubové spojky, který jsem vytvořil pro své studenty. Pomáhá jim vidět proč musí mít gumová vložka dvojnásobný počet zubů a jakým způsobem se sama vystřezuje. V modelu jsem použil: 2x šroub M3 (lepší je M3 stavěcí…
The handle fell off my old tripod because the part that goes here broke. I finally had the skill and tools needed to repair it. So, I did. The teeth aren't perfect because they aren't level across the top, but I couldn't figure out how to…
Template for drawing teeth in carpentry work, suitable for any material such as PLA or PTEG, etc. Šablona pro truhláře na rýsování ozubů, vhodné PLA i PTEG. infill 10%, speed 0.3mm. Author P. Procházka
This is an updated version of the X & Y replacement drive roller I made for my CTC A10S. The original model worked well for me for many months before I received my aluminium replacement rollers from China. The reason I updated this model…
Dies sind zwei ganz normale Zahnräder... These are just normal toothed gears... Zahnräder mit 13 und 7 Zähnen. Gears with 13 and 7 Teeth. Großartig für Zahntechniker. Great for Dental Technicians. Verbunden mit 2x M5x20 Schrauben + 2x M5…
I had a few goes at making a custom tensioner and accidentally arrived at one that matched the original style nicely. This allows the use of a toothed pulley that I think makes for less transmission of belt artifacts into the skin layers.…
Pin or tape the ring to a sheet of paper, put a pen through one of the holes in a gear and roll the gear round inside the ring: it draws loops, stars and flowers. Holes near the edge make spiky curves, holes near the middle make soft…
As it sounds really - a set of Z tops to use toothed idlers for the only spot on a VIRTU Z that is teeth-to-pulley. Designed for the Powge brand 20T idlers from this listing on aliexpress which should be of reasonable quality:…
Remix from remix from remix.... To match my DMYCO DMY3DP-001 (P802M clone) So : wider hole for belt and bearing hole for rods because i keep the original left motor holder use M3 nuts for tighteners Be aware of the thinner guide, try not…
It uses flat a GT2 Profile and 1/4 from a 16T GT2 Pulley with narrowed teeth to not transmit the pulling force into it at the end of the bend. Modeled in Openscad with libraries for GT2 i found Online. Is it better? Maybe, couldn't…
No supports needed. 0.2 speed. Author Petr Procházka.
Wooden Toothed Gears. Hölzerne Zahnräder
When i revisited the clamp on release, i was less scared about the grip on the belt. So this version could be better be course it's a single block and also more accessible without the need for M2 screws. I have no time to test it tho. It…
For the jar nobody can open: push the lid into the V until it's snug against the teeth, hold the jar, and turn the long handle. The leverage does the work, which makes it handy for anyone with weak or sore hands. DETAILS • The V narrows…
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
What do these blocks do? They allow the use of toothed idlers that will drastically reduce belt pitch vfa Can reduce rattling noise on fast accelerations (seems to depend on material used for printing) Easy servicability of belts and…
For attachment, I used some nonpermanent "Gorilla Contact Adhesive" so that any residue can be removed easily without marking the pedals and allowing for a small amount of flex within the join. As most of the weight is also supported with…
For my LGB model railway I had to make some rack railway sections, but the original coupling hooks will detach, because the toothed racks will lift the downward part of the hook, so the carriages likely will detach, just very similar to…
Hold your doors open with the fierce charm of Diego from the Ice Age movies! This door stopper features the saber-toothed cat in a playful pose, combining functionality with a touch of prehistoric fun. Perfect for fans of the iconic…
This remix adds a 2nd set of teeth! I printed at .2 with Silver Silk PLA at 220 and 25% infill.
I added a printable toothed pulley to this great design. We are using this Drawing Bot for a 4H class. I also added an enclosed foot in case you want to put rubber feet on the bottom of the legs. Category: Art Tools
I needed one of those small toothed brass wall hangers, but didn't feel like running to the art store. If the holes are too small for screws, I had good luck using some super glue on the back of my art.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Scrat - Can holder Canholder in the shape of the iconic saber-toothed squirrel from the Ice Age series. Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print…
For attachment, I used some nonpermanent "Gorilla Contact Adhesive" so that any residue can be removed easily without marking the pedals and allowing for a small amount of flex within the join. As most of the weight is also supported with…
I bought a couple of these recently (in the "20T ID3 OD18 W6" variety, though in hindsight maybe the "16T ID3 OD13 W6" variety may have been more appropriate) to replace the pairs of bearings the A8 uses as belt idlers:…
Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Idler sleeve for 624zz bearing (13mm outer diameter). 26 teeth, GT2 2mm pitch profile, 6mm…
Bench dog for 20 mm holes. Suits for Wolfcraft, Bosch, and other not-so-cool benches. Might be suitable for Festool. However, it must be checked (not sure). Category: Parts
Bracket to hold 8.5mm wide toothed idler. One of the x rods sticks out the side on my printer so I use this belt tensioner on the back of the extruder assembly https://www.thingiverse.com/thing:2425783 Bracket fits the injection molded x…
! Please downscale if necessary ! Uber simple wall mount made in SketchUp. Was designed for my saber-toothed cat that was printed at 150% so you will need to scale this model down if you printed the cat at standard size. Print Settings…
Fabrication d'un connecteur de courroie pour la réalisation du lit électrique de la Laser K40 2 x Vis tête bombée cylindrique à empreinte hexagonale M3*8 Product of a belt connector for the electric bed of the Laser K40 2 x Socket head…
Right-angled toothed gear. Gear ratio 3:1. Used bearing 608 and 6004. The distance between the axes in the images. ipt files also attached.
Just a headcomb with pony ears. My daughter and a team mate needed it for a unicycle tournament, where they represent a black and a white knight. I combined two existing models. I had to enlarge the ears of the original model. One print…
It is a 1.25-inch vacuum nozzle. It is toothed to allow for sucking even when it is used on flat surfaces. A normal “non-toothed” nozzle will lose suction if flat against a surface. But this nozzle will still have strong sucking forces to…
When first assembled the CNC Carbon fiber XY joints from Fysetc ( https://s.click.aliexpress.com/e/_DksC2Mh ), I didn't like the fact that they removed toothed idlers that are recommended in the BOM and used flanges bearings instead. So I…
PETG Filament was used for the production of the gear drive for the grater of the ETA - META 0035 mixer. The height of the layer is 0.10 mm, the filling of the object is 30%. Category: Kitchen & Dining
This remix was made for the Gates 2GT toothed idlers. Filastruder, 6mm 3mm ID Prusa: https://www.filastruder.com/products/gates-2gt-idler?variant=32673878442055 I had seen other remixes, but was unhappy with changes outside the idler…
Single piece xy joint for voron 0 providing extra rigidity and precision, this one allows installing toothed idlers. Disable thick bridges if you can to make holes rounder. Due to the reduced bridging capability with it disabled, an extra…
Hello Tribe, This is the second try at a comb, this time with squared teeth. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check out our book…
