Liczymy pasujące modele…
About This is a tool changer modification for the RatRig VCore 3 printer that utilises an E3D style coupling. Belts This modifications is designed with the intention of being used on an VCore 3 with the so called “OpenFront” modifications…
Update 11.08.2026: Added EBB36 Gen2 toolboard mount for the LGX Lite v2 and Moschito Magnum+ Liquid spacer Update 29.07.2026: Added 19 ID hose duct for the EBB42 Gen2 / Sherpa Mini combo Update 11.07.2026: Added OS2 toolboard mount for…
This is the release of Klicky for the VCore3. These parts have all been tested and are working on a few early adopters' machines. Please go to the release blog post or the klicky github for a full installation guide for the Klicky probe.…
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
BOM: 2 cap head screw m6x12 2 t-nut drop in M6 1 brace_RR If you want to support my work, buy me a coffee thanks to Simon Vez, i took a cue from his model…
Open front belt tension mod for Ratrig Vcore 3.1 enclosure version. This is a remix of julianjc84 most excellent work, please see the link below. This is also where you can find non-enclosure versions made by julianjc84.…
I'm happy to share with you my best upgrade for the Vcore. After trying everything possible on different X-axes, this construction gave me results that blew me away. My expectations were definitely exceeded. The special thing is that the…
Hey feel free to test it and please give me some feedback :)
My Vcore 3.1 XY Motor Stepper Mount Mod This mod offers several advantages: Belts are now visible so you can check if they are running properly on the idlers Shoulderbolts for perfect concentricity The pulley runs on a 5mm shaft with ball…
- AWD mod to add ANY Vcore version an easy and reliable AWD configuration - Drive are mounted on a damper system, reducing noise. Pulleys secured with Abec-5/7 bearing for an increased lifespan - Easy assembly, no modifications of the…
Here is my design for mounting a carbon square tube and MGN9H rails on RatRig Vcore-3. This also solves some issues while tightening XY joiner plates and pulleys/idlers alignement. Note1: New XY joiners can be used on it’s own with…
Why? I upgraded my VCore 3.0 to 3.1 parts, including the Oldham coupled bed arms, and I couldn't find a rear bed arm dragchain mount that fitted the new arms, combined with the “old” rear panel with the cable canal on the bottom so I…
Nozzle Wiper for VCore or any 3030 extrusion Please upload your makes, would love to see them BOM: option one: 1 x MG995 Servo 2 x Bearing - 695ZZ 1 x M3 x 20 (I think) 1 x Wire Brush -…
Mount for BTT HDMI7 on RatRig V-Core 4 (with or without Enclosure) This mount allows you to securely attach a BTT HDMI7 v1.2 display to your RatRig V-Core 4, whether you have an enclosure or not. For earlier versions of the HDMI7, use the…
As with the original, only fits the Vcore3-400 spacing as defined by the spacing between the mounting holes in drawing for the backplate. I also fixed an incomplete fillet and removed the descriptive text on the side as it seemed to add…
a new Version of my T1H printhead design for the RatRig V-Core 3 using a MGN12 carriage and a billet main plate. Rapido, Beacon and Orbiter 2.0 on the comparison picture you can see a EVA printhead, T1H and the new T1H2 printhead short M3…
I widened the vcore 4 umbilical guide and opened it up to accept more wires for the umbilical cable to the toolhead.
I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This…
RatRig V-Core3 without enclosure: Led mount Dayspring RatRig VCore 3 LED by Vector3d da Jake90 | Scarica il modello STL gratuito | Printables.com BOM: 2x sup_led_enc (1).stl 2x sup_led_enc (2).stl 4x cap head screw M6x12 4x Tnut m6 3030…
This is a model I created for my RatRig VCore-4 500 IDEX. Some models don't import in the correct orientation. Main Body - Print with its back on the bed Fan Grill - Print with “RatRoaster” face down on the bed Heater Grill - Print with…
Larger versions of the Ratrig vcore4 "Electronics Wire Clip" to accommodate more cables
Hello! Here is a remix of the Voron Trident Auxiliary Fan made by @JacobG3231_143196 , making it compatible with the RatRig VCore 4. Please refer to his model for the BOM and assembly instructions. The extra parts required for this remix…
120mm fan mount for Ratrig vcore 3.1 300mm octopus motherboard cooling. 120mm fan is quiet and makes good pressure to keep stepper drives nice and cool. There is a hole in the other end for wire coming out. Attached to frame with original…
Meant to be mounted to the vcore3 spool holder from rat-rig. Mounts using 2x M6x12mm bolts and 2x M6 3030 tnuts. The coupler used is M10. Not a difficult print, put it on the face with the arch. The extended one roughly centers the hole…
Basically all that I did was bring down the belt path of the v-core 4 to match the belt path of the V-Core 3.1. I have also included the .step file for the Carbon Fiber plate that I am using with a Dragon Ace. If using enclosure, make…
The geared hinge from E. Soderberg was a perfect starting point for making hinges that would be compatible with a RatRig VCore-4 enclosure. The specific model I have is the 500mm IDEX, but it should work for any of the different sizes as…
I don’t like all the bolts showing on my Vcore3 build. It’s a bit too industrial and unfinished for me. The top surface is a robust 1.2mm thickness for durability. The covers include a magnet mount for 5mm x 3mm disc magnets (I had some…
This mounts to the side of the 400 mm enclosure with M6x16 socket head screws, through the existing holes. Use 4 M3x8 screws and M3 heat sinks for the side of the panel. I didn't like the buttons on the earlier models, so this uses…
Designed to fit the new enclosure 2.0, on a Vcore 300. I made this to stop my cats from reaching the wires from the side. should print well in any material since its basically a flat panel Includes two version of the bottom right panel,…
STORE LINK: Shop on BRS Store VCORE 4.1 - 4.0 - 3.0 - 3.1 - 3.2H AWD modules for Vcore ALL Vcore (Non hybrid) Based on the "best seller" product of BRS-ENGINEERING, the BRS-AWD for Vcore 3/3.1, I present you the BRS-AWD V2.1, different…
I couldn't find the dxf files for the aluminum plates for the VCore, so here they are, pulled from the full assembly VCore STEP file.
Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail
Fan for cooling the Octopus BTT board; the design should allow the fan to remain inside the chassis
This is a way to mount the mgn12 rails to a carbon fiber tube. To use as a cf gantry for example a ratrig vcore. The pictures should speak for them selves. Print this 3 times insert complete in the tube. Fasten the screw. first remove the…
If there are problems with Z Wobble when using ballscrews, here is a 100% solution for it. Extremely simple, cheap and space-saving solution. Eliminates 100% of any Z wobble if present, no backlash and easy to swap. Fits Vcore 3.1 Stepper…
This mount is a very flexible way to bring any kind of led strip into your 3D printer or any 3030 extrusion based construction. You can use this with any led strip in any length. To keep your led strip cool, we are going to mount it onto…
Used the idea from https://www.printables.com/model/881165-door-hinge-remix to build a set of door hinges for my RatRig VCore 4. At least all parts have been changed, adapted, modified to be used on my printer. For each hinge 2 magnets…
CPAP box for RatRig VCore 3/3.1 - 200mm → 500mm Print it in whatever material you like. No supports needed. BOM: n.1 Mellow WS7040 CPAP fan n.1 Mellow WS7040 CPAP drive kit n.3 M2.5x5 selftapping screws n.11 M3x6mm brass inserts n.4…
This is housing for the BigTreetTech 12864 Display. Might fit other versions of the 12864 as well, not tested. Two versions included: with and without the reset button. Be careful: once the printed button is put on the switch, it will…
I recently assembled a V-Core3 printer from a RatRig kit. I put together the attached tools to assist with assembly. The tools are: Spacers for the A and B motor pulleys. You snap these on the shaft, and then put the pulley on and slide…
Mount for a Chamber Temp Sensor (NTC 100K 5x25mm) Uses an M6x12 Screw and M6 T-Nut to mount
I created my own Enclosure for the printer and use it for my VCore 3.1 and VCore 4. The Base Plate is 350x350mm (2 pcs. needed). 8 pcs M5x16 Countersunk screws are required to fix the corners. 16 pcs. M3x8 Countersunk screws and 16 pcs.…
This model includes two modified parts incorporated into the EVA3 Assembly the comes with the RatRig vCore3.1 printers. These changes allow mounting of a Beacon3D scanner (revH - low profile) underneath the EVA3 behind the Phaetus hot…
Why? I overhastily ordered my VCore 3 500 side panels with the standard dxf's provided by RatRig, ignoring, that I won't use the standard LAN sockets, so there was this rectangular hole… Furthermore I don't like exposed mains wires inside…
CPAP and Wire Guide for RatRig Vcore3 ^300 with PT1000 mount and shelves Please upload your makes, would love to see them
This is an fastener for the Igus chain Series 05 inner width 16mm: https://www.igus.de/iPro/iPro_01_0002_0001_DEde.htm?ArtNr=05.16.038.0 I built it for my RatRig V Core 3 printer where I am using the above chain to carry the bed cables.…
STORE LINK AVAILABLE with 1204 and 1605 Ballscrew A Z-Upgrade complete overhaul for VCORE 4.0/4.1 The Z-Upgrade replace the original Z system with a ballscrews driven system. More precise, more reliable over time, it offers a very high…
After getting frustrated by belts slipping out of the front toolhead belt clips and then the headset insert torquing out trying to get better grip on the belt I decided to try something different. In the style of VZBot belt clips but…
Why? I wanted to use a high quality IEC socket including a double fuse and a capacity to carry 10amps of load (VCore 3.1 500). Furthermore I don't like exposed mains wires inside the printer. Features: Fixing the IEC socket in a…
Mod for 10x11 dragchain with openings ( https://www.aliexpress.com/item/32214281467.html ). Original mount didn't fit on my Vcore3.1 anyway (insufficient clearance when Z=0), I had to mod it a little bit more than just adjusting holes for…
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This…
added a different belt path and added teeth to better grab the belts walls: 4-5 Infill: 25% Top/Bottom Layers: 4-5
Support Dayspring RatRig LED by Vector3d BOM: 4x cap head screw M6x12 4x Tnut m6 3030 4x heatinsert M3 4x M3x6/8 you can buy it here: Dayspring RatRig LED - Vector 3D Download: led.cfg klipperscreen.conf printer.cfg…
Update 12-04-2022 see below. This mod is for using Ball screw rods instead of the wobbly original lead screws. The ball screws used are the SFU1204 and for the Vcore3 300mm you need the 450mm version. They can be bought from this seller…
***Update January 16 2025 Revised “Back” STL file to improve the tie wrap holes at the bottom to secure the beacon cable. The holes are larger and more robust. ***Update January, 15 2025 Revised "Back" STL file to improve thin wall issues…
25th July 2022 - Added mount to be used with EVA3. Added image to help with print orientation. It will need support on build plate Updated cable mount (EVA 2.4) parts to tuck in a 2mm Steel cable to make sure harness stays up Use two 2mm…
XY Motor Fan Mount for XY Motors of RatRigs VCore 3.1. Height is adjustable - so if you use a heatsink for example, fan mount can be placed further away from motor. Or if you use the Motor Decouple-Damper from DJ_Designs . Material you…
I wanted a filament cutter requiring minimal disassembly of the original toolhead. Inspired by other designs, I created this one—and it works surprisingly well. Print settings The main part was printed in ASA with a 0.2 mm layer height ,…
This model is a remix of the Jevermeister DIN rail holder. ***ELECTRONICS PANEL MUST DEFINITELY BE 3MM THICK*** The original design from Jevermeister is fantastic but I wanted more flexibility in mounting and remounting DIN rail in the…
Its a corner bracket for the Vcore 3 for the Pi Camera. Sits on top of the right idler and is angled to the center of the build plate. I modeled it for the Vcore 500 but it should work with all variants. Works only with the enclosure. You…
I wanted to create an AWD mod that included front idler tensions, I have this running on mine for about a month now without issues Ive also included the step file as I would love for this to be developed further. Please upload your makes,…
Enclosure versione This is a support for the joyaccess webcam, it could also fit other webcams. RatRig V-Core3 without enclosure: RatRig VCore 3 webcam support da Jake90 | Scarica il modello STL gratuito | Printables.com BOM: 2x cap head…
An evolution of the M2 L3ver with the BRS AWD drive integration to a simpler implementation, Actually work natively for VCORE 3.0 and extensively 3.1. Unit made to fit Vcore equipped with enclosure 2.0 (no needs for the 3030 front…
Sturdier RatRig 4 VCore Front Clamp with more clamping force
Das “RatRig VCore 300 Panel Elektronik” ist in drei Versionen verfügbar um alle Möglichkeiten abzudecken. Es gibt leider zu viele Stecker, Schalter etc. als das man alles Sinnvoll abdecken könnte. Selbst die Schraubenlöcher sollte sich…
If someone wants the Step-file, just ask :) ONLY WORKS FOR THE ORIGINAL PANELS ( Holes are 89mm apart ) New Door Handles for the Enclosure 2.0 for the VCore 3.1, the included ones (atleast mine) were pretty warped and bent my panel. I…
Little jig I designed to help you mount and adjust your electronics subframe to the main VCore frame. 47mm for no panel 44mm for 3mm panels 43mm for 4mm panels The little arrow should point to your electronics subframe.
It needs some other adjustment and a specific BOM (with links for the part needed). I'm working on the hardware parts (Nut, Bolts, ecc), The aim is to use as much of the hardware as possible that come with the BLV kits (see fysetc), with…
An evolution of the M2 L3ver with the BRS AWD drive integration to a simpler implementation, Actually work natively for VCORE 3.0 and extensively 3.1. Unit made to fit Vcore equipped with enclosure 1.0 or without the 3030 front top…
Remix from https://www.thingiverse.com/thing:5369512 Christian Dyer his design only works on new builds. The Retro Fit design works on printers that are already fully build and do not require tear down of the frame profiles. Installation…
This replaces the bottom two corners and bottom plate of the steel electronics enclosure with a 75 mm deep expansion to house the on/off switch. There is also space for adding something else in the future, or just more space for wire…
I redesigned the printhead from the Vcore4 to fit my hardware. I also reduced the weight and made it more compact. Fits Vcore3 + Vcore4! Slice Mosuqito Magnum hotend VzHextrudort/LGX Lite mounting option MGN9 rail instead of MGN12 4028…
Auto rewinding filament spools using gravity to solve the backlash caused by fast-moving printhead Inspired by https://www.printables.com/model/10370-gravity-spoolholder-for-mmu2s
Logitech C270 webcam holder for Ratrig Vcore 3 300 Suits also for any 30x30 extursion. Pictures not so good. Printed with quite wet filament. Connection to printed part with M3X25 bolt and M3 nut. Connection to 30x30 extursion with M6 or…
Allow the correct X-X1 and Y-Y1 belts routing for the BRS-AWD drives upgrade
Here's a case for the HDMI7. I remixed it to fit my upcoming vcore4 build. You need : 2x M6 locking nuts 2x M6 HexScrews 30mm Add a pause during printing to embed the m6 locknuts into the knobs.
There are 2 models. The big one need supports during print, it's closer to the original V-COM design. The second one (short) does not need supports, you are supposed to put it directly at the end of your mask tube.
If you have your spool holder mounted on the side (enclosed vcore 3.1), you might want to replace the PTFE clip with the BTT filament sensor. It mounts the the BTT filament sensor between the electronics pannel and the back frame
Here is my ROME setup (for more information on Helge Keck's ROME see https://github.com/HelgeKeck/rome ) for my VCORE3 500 printer. Some of these are remixed versions of Helge's designs and some are original. This is a fully tested setup…
I saw a number of videos on the WobbleX and was very interested in trying it out on my two Rat Rigs. I published this to assist anyone else doing the mod. The PDF file has references to you-tube videos and the link to the github page with…
LEGO Divco 206 Ice Truck 1953
with these brackets you can install your noctua 200mm fan on a 3030 aluminum extrusion print settings: nozzle 0.4mm perimeters: 3-4 infill: 20% LH: 0.2 BOM: 2 cap head screw m4x40 4 washer m4 2 hex block nut m4
This is a support for the joyaccess webcam, it could also fit other webcams, i make available the .step file Enclosure version: RatRig VCore 3 with enclosure webcam support da Jake90 | Scarica il modello STL gratuito | Printables.com BOM:…
I remixed the ivan5rov top_endstop for the mgn9h rail with heat inserts also for the endstop, because my screws did not hold enough in the original version. I recommend to print it on the side not as in my picture shown - flat on the…
Because I don't like the hex nuts and I like clean look of the bed arms, I remixed the original RatRig VCore 3.1 bed arms and added heat inserts. On some (rear arm + right arm) I also added RatRig logos. On the rear arm you need to…
This is bracket to mount a cable tray created using Shaun577's parametric cable tray. When mounted, it will provide a cable tray to pass cables from the front to the back of a Ratrig vcore 4.0. I have included a cable tray generated by…
I create a pcb for the lightning of the corner at the RR VC4. So i added 2 more holes in the backside for a cleaner wirering and my custom PCB, also i flat the diffusior a bit to improve the light what is coming out :) if you are…
Cable guide for my Ratrig Vcore 3 300. There is a a frame anchor and a hotend anchor for the piano wire. For the Frame anchor use a M3 screw for securing the piano wire and the original screw for mounting it to the printer frame. For the…
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
To be filled out at a later date.
These hinges are designed to align with the holes of the standard RatRig VCore 4 front panel, enabling it to be converted into two doors. While originally intended for 4mm side panels, these hinges are also compatible with thinner or…
Reverse bowden VCore3 Can be mounted on all printers with 3030 extrusions BOM: 1x RB_vcore.stl 1x PC04-M10 1x PTFE tube (ID 3mm OD 4mm) 2x cap head screw M6x12 2x Tnut m6 3030
IEC EMI FILTER mount for RatRig VCORE 3/3.1 BOM: IEC.stl IEC EMI FILTER 2x Heat insert M3xD4.6xL4 2 Cap head screw M3x8 4 Cap head screw M6x12 4 T-Nut drop-in 3030 IEC EMI FILTER (like this)
See Dizzy Keeb's original post for more information. There is no thread on the ECAS version, so for the IDEX I just mirrored it. I did the modification in FreeCAD dev 1.1, and have attached the file if someone wants to see what I did. I…
I used the original step files from Ratrig to create this mod. It was hard to get the magnets into the stock magnet mounts for all front / top panels. So I decided to make them “enclosed” to the printed files. I printed the parts with…
After cutting the hose cpap hose to size, the raw end wouldn't fit over the hose fitting for the amazing design from @Scrambler77. I designed this adapter so I can slip fit the hose on to the existing adapter. Works with standard 22mm…
I made these parts to use a Euclid Probe on my VCore (500), because i found my Pinda too unreliable and since I'm also often using Print Surfaces which are not magnetic, i found the Euclid was my best choice. The probe mount is quite…
I want to use an either-net cable on my Raspberry Pi instead of WiFi. There is not a provision to get the cable through the bottom panel. I also made a second port for the Z motor wiring to enter from the bottom. The holes are big enough…
