Counting matching models…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
I threw this together quick in Shapr3d for a fun ornament for the kids to share and figured I'd share the model. It can be scaled up for use as a holiday ornament, or scaled down for a simple charm for necklace or bracelet. Print times…
I have printed a bunch of different Kitchenaid stand mixer accessory hangers before, and most of the break because of the orientation of the layer lines and the twisting force you usually need to apply to get the things to hang properly.…
I liked the original model by Neybao, but the power port on my buds case was quite a bit lower (almost 5 mm!) than the port on the original model. So, I had to widen that a little to make room for what I gues is a factory change in the…
I really liked the original model by @Kernel Sanders , but I have a cabinet above the shelf where we have the detergent bottle and the bottom of the cabinet is lower than the cup. So, I extended the neck of the drain to get the thing out…
Inspired by the brilliant used of vase mode on his AA and AAA battery storage trays, here , I made a set for D batteries, and another for C batteries. These use the same vase mode technique to print very quickly while using very little…
@JuanPuchol_41170's duct is a great upgrade to the Mk4's fan setup; but I was having a hard time printing it without a gap showing up in the one corner (see close up). So, this is just a mild remix that adds some material in the corner…
Inspired by the brilliant used of vase mode on his AA and AAA battery storage trays, here , I made a set for D bateries, and another for C batteries. These use the same vase mode technique to print very quickly while using very little…
This is a Left-Hand (Counter/Anti-Clockwise) threaded version of my Twist Lock Dust Ports for 4 inch (100mm) hoses. Previously, I had been using a magnetic locking mechanism to attach hoses to my dust collector. But I found that often…
I needed a short but sturdy riser that I could use to turn a cabinet door into a monitor shelf. I saw a few designs I liked, and this takes inspiration from many of them. Unlike other shelves I found, I wanted this to be fairly low…
I needed an unobtrusive base station / stand for a pan and tilt Wyze Cam in my print cabinet. Since the camera is mounted between printers, I needed the chord to exit toward the back of the cabinet. This design is simple, sturdy, and with…
It took forever, but I have manually ported over much of the Sovol Zero profile settings from OrcaSlicer to PrusaSlicer. This configuration bundle INI file should include the following: Printer Config: SOVOL Zero - SV Zero Print Settings:…
I saw this design by @Paradogo in the back to school contest and really liked how simple and easy the design was, especially since it could be printed thin enough to be kept in any notebook. However, the letters flexed the first time I…
One of the kiddos broke the lid off their water bottle, so I modeled up a new one in Shapr3D and gave it a go. This was a good opportunity to not only do a little reverse engineering using photos, but also to model complex curves and…
Just a minor remix to make both pieces touch the build plate. I also beefed up the mounting ring to make up for how thin it got when scaled to the 85% needed for an Adesso camera. This was scaled to fit a generic Webcam. Based on how many…
I needed a gift and came up with this… it is a simple purse or handbag frame that can be skinned in almost any material. With this frame, some lacing and scraps of material you and your kids can have a fun and relatively easy weekend…
Some simple go-pro style mounts for aluminum LED strip channel (17x9mm). Originally I had used a narrower design, but I found them to be too brittle, even when printed in PETG. This is a wide-body version that does the job well and…
A simple carabiner using a compliant spring mechanism to secure the latch. Good for keychains and backpack baubles. I'll probably make a bunch of different variations on this theme this year as I play with compliant mechanisms in Shapr. I…
Pretty simple remix of PotatoGambit's 4 inch dust collector pipe hanger. I was trying to get the mounting screws inboard so I could use a 1x4 plank to mount my dust collection plumbing at a funny angle along my ceiling. These were super…
I needed a phone holder for my truck, and the little pocket thing(?) that the manufacturer provided was basically useless space. So I found a few models that would fit that space well and then modified them to have a ram-style mount that…
This is a Right-Hand (Clockwise) threaded version of my Twist Lock Dust Ports for 4 inch (100mm) hoses. Previously, I had been using a magnetic locking mechanism to attach hoses to my dust collector. But I found that often when using…
This is a super simple vertical laptop stand. Fits most non-gaming laptops with a little wiggle room. This is useful when desk space is at a premium and you happen to have a dock or other means of wiring in the laptop without having to…
I loved how much the Paver mod reduced the sound in my enclosure, but two things that frustrated me about the pavers in my old setup was how much they raised the printers up, and the overall look the garden stone left me with. So, rather…
I liked the look of the original caliper hanger so much that I decided to make a few additional models with the same look and feel of the original. This one was modified to hold two pairs of pliers vertically. This uses the same mounting…
These are some simple trim Pieces to use around the edge of each of the wall panels in an Ikea LACK or LACK-Stack enclosure. These don't protrude too far into the enclosure, so they should not interfere with the printer or any of the…
I am working on porting over the OrcaSlicer profiles for the SOVOL Zero to PrusaSlicer, and getting the build plate sorted was the first task. Over the next few weeks, I'll get the rest of the profile brough over and posted for others to…
I have a generic Amazon 7 port USB holder, and was not able to find an existing model that would allow me to hang the thing on an Ikea Skadis pegboard… so, I whipped this up. I used the awesome dovetail Skadis hook design…
This is a Right-Hand (Clockwise) threaded version of my Twist Lock Dust Ports for 2.5 inch hoses. Previously, I had been using a magnetic locking mechanism to attach hoses to my dust collector. But I found that often when using longer…
The Sawstop router box is a beautiful thing. But the dust collection port leaves a lot to be desired. I wanted to be able to use a full sized 4 inch end on the box, and use my overhead hoses for the fence. My workbench setup would not…
I started with the baseline Sovol Zero LCD Case, and then used @Nadir's model of the MKS IPS50 5" Display (https://www.printables.com/model/1307275-mks-ips50-5-display-sovol-sv08-step-file-mockup) and made them fit together. This provides…
Two versions of a laptop hanger for behind a monitor. The first is intended to hang the laptop from the back of the monitor and can be used with or without double face tape. This one holds the laptop in a closed position. The second is…
I was working on some cable management for my desk, which included mounting a Skadis to the back of my monitor. I didn't have a good way to secure a mini PC I use for 3D scanning to the back of the Skadis, so I came up with this. It…
This is a Left-Hand (Counter/Anti-Clockwise) threaded version of my Twist Lock Dust Ports for 2.5 inch hoses. Previously, I had been using a magnetic locking mechanism to attach hoses to my dust collector. But I found that often when…
So, we needed some fun holiday decorations to hand out to friends, and the theme this year wound up being Cows. So, after some searching, we found an easily remixable model to work with and got to work modding it and adding some simple…
This is a really basic barrel Pendant for small glowsticks. Can be used as a Pendant necklace, or earrings. I recommend printing in PLA or PETG, so it has just a little flex to it. To assemble, you'll bend the pendant a little bit, then…
I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop. This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig. The…
A simple molle patch for a tool bag. Easily printable in PLA or PETG and intended for standard 1 inch molle webbing.
I recently picked up a Sovol Zero for some high speed printing and was disappointed in the stock screen / knob interface, as well as the Factory Sovol 5 inch screen upgrade (which works perfectly, but just looks weird being so large on…
I have benn playing with resin and squshy molds lately and this model by Whitney Richmond seemed like a pretty simple model to turn into a resin / casting mold. Just a few minor tweeks to the original model to make it workk better in a…
This is a build plate holoder for the side of the Sovol Zero. This was inspired by @lion7718 's solution to this problem (https://www.printables.com/model/1303999-sovol-zero-magnetic-buildplate-holder), but is my own design. I tried to…
I am using an IKEA Förnuftig filter in the back wall of my Ikea Lack enclosure to help clean and cycle the air between the two chambers. As the filter mount I am using has a bit of depth to it, I wanted to frame the thing nicely. So, I…
I really liked how the original caliper holder turned out, but it was too big to store my smaller calipers without them sitting with a pretty good tilt to them. So I reworked it a little to make the gap a bit smaller and to raise up the…
This is an adapter for the Sovol Zero that allows the use of the HULA foot design by "thrutheframe" (available here: Makerworld HULA Foot ). I recently picked up a set of these through Voxel, but they were designed for the Bambu Labs…
I figured why not make something for the contest :) Print in orientation shown with supports around the edge and the supports should pop off easy.
Just added a pair of mounting points to the front of the guide to make installation in an Ikea enclosure a little easier and more secure. Printable on a Prusa mini or similar small form factor machine. Printed in PETG with solid infill…
I had a hard time finding the right corner brace for a 2020 drawer I was working open, so I whipped one up.
Here is a great little fidget toy Bolt and Nut set. Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until…
Croc charm for MMU printers. Print this with the face down and minimal supports around the edges.
Part of a 30 day personal challenege to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. This is a reverse, fine thread…
Simple 2-color MMU croc charm in the shape of a cute bunny. I included the STEP file for anyone who wants to remix. I added a different version, too. Enjoy!
UPDATE: So sorry everyone, I uploaded the wrong model. All fixed now. A 2020 cross brace for bridging gaps.
This version will keep the kiddos from fighting with the wrong seatbelt buckle from the booster seats. Enjoy!
Pretty simple, 2 piece print to hold hand sanitizer, wipes, tissues or whatever else you need for a trip in the car. This is designed to hook over the side of the center console. It has 2 pockets, one for a bottle, and one for something…
A friend of mine came to me with a broken part from a Halloween decoration. His skeleton had a broken knee joint. And since the part was removable, he figured we should try to repair the thing, rather than thrown the whole thing out and…
Simple 2020 corner brace. Supports m5 bolts and t-nuts. Enjoy!
This is a model of a wooden Bench / Stool made in Shapr 3D as part of a 30 day personal challenege to become proficient in Shapr 3D, a parametric, pen and pad based CAD program. This tutorial primarily introduces replace/face, mirror and…
This is a mockup of a Waveshare 3.5 inch Touch Screen circuit board with ports, switches, mounts and flat cables included. I updated my SOVOL Zero with the factory 5 inch touchscreen upgrade. And after spending a ton of time making a…
The mid-sized IKEA LACK table is just a little too narrow to fit a pair of Mk3 or Mk4 printers on it, side by side. But the largest of the Lack tables is just too big to be used in most spaces. So, after doing some measurements, I found…
I am using an Ikea Fornuftig air filter as part of my Ikea LACK enclosure. But the tweed filter cloth is a bit much to look at. So I decided to do what I have done with speakers for years and make a grill cloth out of a fun t-shirt. This…
Part of a 30 day personal challenege to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. Published here, because, why…
Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. This is a basic set of generic…
This was a quick model I whipped up in Shapr3d to start playing with Revolve and Intersect tools a bit. This can probably be printed, but I would recommend using soluble supports or some similar support because the overhangs are pretty…
I've been making some molle webbing tags for some friends and for my tool bag, and this one was a request of a friend. This should print in about 10-15 minutes depending on settings. To get the color change, just insert a filament change…
The source marked this model as adult content.
I whipped this up to provide a simple storage solution for a non-gaming laptop and a tablet that I could store, wired, along the side of my desk. I saw a few nice models out there for laptop stands, but wanted the ability to also have a…
I wanted to have a small smoke detector in each of the chambers of my Lack Stack. But I didn't want the thing sticking way into the chamber. So, I made this little pocket mount that recesses up into the base of the next shelf, or through…
I did a little tweaking of the STL to make this work with my old v2 cams in my Lack Enclosure. Not a lot of change here, just a little reshaping of the base for the older V2 style cameras, really. I also notched the bottom little more to…
Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. Published here, because, why…
Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. Published here, because, why…
Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. Published here, because, why…
A buddy of mine called me needing an E-10 socket for a project. Not having one, and not finding any available at the local hardware store, I decided to print one. Did a little TinkerCad magic in the car on the tablet and then sent it over…
This is a Squishy mold kit of a classic Narwhal. The mold is a split mold that can be held together with 2 binder clips and a little scotch tape. I notched the mold out to reduce material, as well. I recommend using Elmer's squishy mix,…
I have a bunch of the Auto-Rewinder Spool centers, as well as a bunch of the axles for those spool holders. Since my new enclosure is using a drawer mechanism to hold 5 spools on each side of the enclosure, above each MMU-enabled printer,…
Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. Published here, because, why…
Part of a 30 day personal challenge to learn a new tool. The chosen tool is Shapr3D. The goal is to spend an hour a day recreating tutorials and familiarizing myself with the tool until I become proficient. Published here, because, why…
This is a simple nested vase modeled in Shapr3D. This is intended for an MMU and can not be printed as a multi-part print. Scale this up or down to fit your need. My purge settings were not quite right for silk filaments, but I think the…
I needed a clean way to hold the spools for my MMU enabled machines within my wide body Lack enclosure. But, I also wanted to be able to get in there and service and change the spools easily. Having the spools in the enclosure helps…
I was building an enclosed Mk3S printer for a local school and needed a way to keep the Bento Box from tipping over in the Prusa enclosure, but it also needed to be removable so that the carbon and HEPA filters could be changed out easily…
I had an old (long since discontinued) Ribba LED light from Ikea. These were originally intended to snap onto the top of a Ribba picture frame. When they went end of like (maybe 2017?) I picked up a bunch in the scratch and dent section…
I really liked my over blade port adapter, and it worked well for me for quite a while. But when I changed out the hose ends across my shop, I needed something that would attach to the new style hose ends. So, this model uses the same…
I needed some simple, reusable cable ties for some USB and lightning cables for when I travel. The hook and loop were nice, but they were wearing on the fabric wrap of the cables and of my travel kit, so I wanted something that would be…
I decided to help out a local effort building a cardboard pirate ship that happened to need some quick cannon props modeled up. Based on standard 4 inch PVC sewer pipe, these end caps and pivot sleeve give any PVC that authentic Pirate-y…
UPDATE: 6/21/2026: V2 reduces the width and depth of the locking tab to better fit the v-slot channel on some versions of 3030. I sourced from 2 different amazon suppliers and one set is just slightly narrower than the other and caused…
I needed a model of this remote to make a custom faceplate. So out came the calipers and radius gauges. A few minutes later, I had my blank model to use for faceplate design and fit checks. Maybe someone else will find this useful. I have…
I needed some T-Shirt size labels to put on a wire baker's rack to help keep the T-shirt rack organized. This solution can use the MMU to produce some clean, sturdy, snap-in-place labels for the edge of a wire rack. I printed min in solid…
This is a 2 part, magnetically clasped zipper pull, for the ends of a hoodie cord, a zipper pull, or a paracord keychain. The zipper pulls use 4 6x3mm magnets pressed into the sides of the heart.
I have a bunch of saplings in the back yard and in the garden that I use rebar stakes to keep firmly rooted in strong wind. I wanted some caps to put on the end of the rebar so no one inadvertently hurt themselves when picking berries or…
I needed a quick panel grommet for a IKEA Fornuftig cable I am passing through an ABS panel. The goal was to get a snug fit without compressing the power cable. This split grommet fits a 12-13mm hole (as wide as the power connector on the…
This is heavily influenced by the leather strap that comes with the min-amame headphones. A little trace and a little scan and vua-la (Sorry, there was no model of this online to link). I wanted to be able to customize this strap to go…
A friend of mine did me a solid and printed me out the one piece Skadis door for this box already, using a larger machine. So when I went to use the shell with the larger magnets only to find the door wouldn't close, I had to do something…
This cable tie anchor twists into place to create a cable tie anchoring point on 3030 aluminum extrusion. Ideal for cable management on anything made from 3030 extrusion. 13mm wide slot to accommodate velcro hook and loop cable ties…
I needed a rough CAD model for the Ikea Fornuftig air purifier / filter that I use in my print tower and didn't have any luck finding one, so I pulled out the tape measure and some radius gauges and whipped one up. The main dimensions I…
I wanted a semi-removable mount for a Wyze Cam on the side or Top of a Core One printer. This is a 75 degree mount that holds a 52x52x48mm Wyze Cam OG (WyzeCGSD). Use some double face tape or command strips for the trim ring to secure the…
I wanted a semi-removable mount for a Wyze Cam on the side or Top of a Core One printer. This is a 70 degree mount that holds a 52x52x48mm Wyze Cam OG (WyzeCGSD). Use some double face tape or command strips for the trim ring to secure the…
I needed a grommet for a project that needed to have a slightly recessed m4 nut, so I whipped this up. Pretty simple design, and prints in under 5 minutes. The jacket for around the bolt had to be pretty narrow, also, allowing for only…
I use a PVC arch across my vegetable garden and support my vining plants from that archway using a makeshift trellis. The Tee fittings on this have a tendency to snap after a year in the sun, as they are a tress concentrator, especially…
The Problem I am building an updated print garden loosely based on an enclosed server rack design, complete with printers on drawers, draw through air, and cable management. To keep things tidy, I wanted to use similar style server cable…
I needed some mounts for LED channel in a 3030 cabinet I am working on and designed these. They hold the channel as press fit, and have a pass thru for wiring on the ends (pick whichever end needs is, and use the solid cap on the other.…
I needed a mount for a Sovol SH03 filament drier in my new printer cabinet so that I could have the drier on a drawer made of some aluminum extrusion. This mount matches the underside of the Sovol SH03 4 filament drier perfectly, allowing…
I wanted a semi-removable mount for a Wyze Cam on the side or Top of a Core One printer. This is a 90 degree mount that holds a 52x52x48mm Wyze Cam OG (WyzeCGSD). Use some double face tape or command strips for the trim ring to secure the…
