Counting matching models…
Hero Me Gen7.4 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across 3D printers, hot ends, extruders, ABLs, and other components. The Hero Me Gen7 is all about choice and personal…
Print without supports, whatever type of filament you like. Unscrew the end of the SV08, slide Part A on, put the end back on, add filament, screw on cap. The cones should clamp on to the filament. There is a slot on Part A for a zip tie,…
Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)
This is a calibration print to test your slicer settings when building the Box Turtle Automated Filament Changer and doubles as a cool fidget toy when you're done! Please check the Discord for more information. If you would like a preview…
This part serves no purpose other than to make my Tronxy XY-2 Pro match the aesthetics of my Creality and like machines. I like to install similar upgrades on all my “like” machines for uniformity sake. Since my Tronxy XY-2 Pro is barely…
These are parts to make a ventilation system, you just need an 80mm pc fan (I use a phone charger to run it), 80mm diameter ventilation pipe and some hex-nuts and bolts for it. I use it for my elegoo saturn but also for my fdm printing…
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
I wanted a minimalist design that keeps the filament off of the z-screw, but also avoids any drag on the line. Print Settings Rafts: No Supports: No **Resolution:** .2 Infill: 40% **Filament:** generic PLA any Notes: The filament should…
A simple recirculating air filter system for the Qidi Q1 Pro. Reuses existing fans and components to seal off the printer chamber, and remove particles and chemicals from the closed printer chamber during printing. In contrast to other…
Remixed the extruder mount to fit without the print head casing.
(ENG) It happened to me relatively soon that the lighting stopped working on my QIDI Q1 printer. The LED strip was bad. Probably thanks to the high temperatures, who knows... Based on a suggestion by @Damien_304779 I made my own version…
This is the adapter I designed to attach the Smart Orbiter 3 (Revo Edition) to my Hypercube Evolution. It should fit the standard Hypercube Evolution carriage with 3mm dowel pins. It should work as well for the original Smart Orbiter 3…
//_UPDATE_// In putting together everything I found out that the umbilical plate that I originally put on was the smaller one. There are several different options for the plate. Ultimately there are 2 sizes and many options for what cable…
I wanted to have the filament run out sensor hang over the 2020 extrusion, as the Two Trees Bluer Plus uses an extrusion with a flat front but standard 2020 track on top. This uses M3x10 to self-tap into the plastic, and used the M5…
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
Переделка оригинальной зашивки от Flashforge . Все панели печатные, так же добавлено боковое крепление для катушки, интегрирован датчик температуры и влажности, добавлена панель под 4 сенсорные кнопки для управления различными функциями -…
A full redesign of my earlier 2020 CPAP hose bridge ( 2020 profile CPAP slim bridge by minilogique | Download free STL model | Printables.com ). Print as is, will need relatively well tuned supports, otherwise you just have to do some…
This is a motherboard mound for the Milo 1.5 with the same exact spacing as the LDO kit fly board comes with. You can keep the t-nuts in the same exact location. Small 3m heat inset from the back. Opening is 5mm for the heat insert
Die Filamentführung ist verbessert für den Sovol SV04. Rillenrolle ist eine 11x4x4mm Rolle. Die für den Rollenhalter ist ein Kugellager mit 22x7x8mm. Die Befestigungsschraube für die Rollenhalterung ist jetzt eine längere 4x16mm…
For fast printing, I lacked rigidity. That's why I created this Y-motor mount for a belt 9 mm with a support bearing. This Y-motor mount is suitable for printers: Ender 2 Pro, Ender 3, Creality CR-10, Tevo tornado and Sovol SV01. Also,…
Why The < prior upgrades > to my X-CF Pro work very well. The part quality was exceptional. The convenience - top notch. Why not make it go faster. I had no idea the neXTG Fiber from Drop Effect would be so fantastic when I started down…
This is a Fully enclosed 1in riser for the Qidi plus4 printer, Consisting of 6 separate pieces. This has slots done over the grab handles and along the back for material reduction (this is a hefty print as it is) but can be used to put…
A model that provides a stable, sturdy, and completely reversible mount for your ADXL345 for input shaper calibration. Requires two M2x4mm screws. Print the model, but when it concludes keep your bed heated Screw ADXL345 into the mount…
This riser is mounted and assembled using M3 screws making it rigid and reliable. Also, it is easy to print with high quality. You will need: M3x30 - 4 M3x5 screws - 8 M3x4.5x3 heat inserts - 8 Vents are not needed (but can be added) if…
Adjustable peg for holding Ankermake toolkit on a SKADIS organizer, providing some flexibility on spacing. Recommend using two, though it will both fit and balance in one. Built from @PinkOrange09_1527050 ‘s AnkerMake Tool Kit Holder and…
I made some modifications to the screen holder from this project https://www.printables.com/model/862834-guppy-screen-display-holder-for-creality-ender-3-v to allow access to the USB port.
These Idler blocks lets you use M5 hardware to tension your belts. You need 2xM5 nuts and 2x M5x20 bolts. The Idler towers needs to be drilled out with a 5-6mm bit to make room for the bolts.
After relocating the filament spool to the top of the printer, the filament would unwind if the spool was full. This guide ensures the filament stays within the limits of the spool during printing. After a few hundred grams of filament is…
Because the gravity could ruin your print, I just made this little thing
VZBOT 235 AWD - CNC kit Back Motor Cover L/R side With screwdriver hole for disassembly Print from ABS, ASA, PC or PA (CF)
Qidi Plus 4 Rear Cover with the choice of different fan sizes in 60mm, 80mm, 92mm, 120mm Printer settings with ASA are with my printer. Your settings may differ from these. Material ASA (Qidi) HotEnd Nozzel Temp: 270°C Bed Temp: 105°C…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
Bucket for the side, is inserted into the existing holes, works with enclosure
VZBOT 235 AWD - CNC kit Diffuser for AirBox - smaller air flow - 66% of the original intake area. When printing large parts with sharp corners from ABS and ASA, the edges of the model came off the PEI (swing - well known). It didn't work…
VZBOT 235 AWD - 180° door hinges for CNC kit The original hinges loosened very little and interfered with manipulation around the printer. The remixed model was for the printed version with 2WD, this one is on AWD - CNC kit. In addition,…
The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…
I wanted a horizontal mount for the SKR Mini E3 V2 to act as a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display. Printed in PLA using Voron print specifications. Supports…
Created this for my V0.2 to secure cables going up into the z cable chain with a zip tie.
Print with whatever standard settings you use on your printer. Then check the X, Y, and Z dimensions for dimensional accuracy. Use the 10mm width of the section to verify your extrusion before adjusting the XY steps. Don't forget to check…
In order to print PLA, you need to vent the chamber. I designed a quick and simple lid prop. I would print this and in at least PETG, likely higher temp filament like ASA or ABS. No supports, no hassle, quick print.
2/15/26 - UPDATE: Added an adapter to go from Creality CR-Touch to BTT MicroProbe, based off of user feedback (untested by myself). This is an adapter to mount a BTT MicroProbe in place of a BLTouch V3.1 (might also work to replace a…
I really hate how Sovol provided no provision for properly sealing off or even attaching the bottom edge of an enclosure in the shape of the base. So… I made these up, to give a surface for attaching some foam tape, and to provide some…
...made this Remix of Holspeed´s Filament Guide for the Biqu B1. I had to grind the radius a little bit... Print Settings Rafts: Doesn't Matter Supports: No **Resolution:** 0,2mm Infill: 20% Category: 3D Printer Parts
OV5640 camera the smallest tilting mount with an angle of 0-180° I was looking for a minimalist solution for the camera mount, but everything seemed massive and big, everything is beautiful, but it interferes with the printer's space.…
Hi all here are all my mods for V-Minion 1.1 ( this is NOT mods from 1.0 to 1.1 ) original files are found here V-Minion 1.1 Alpha - Rat Rig Lab these mods are from the 1.1 since i have had it for a while (helped develop it) i don't have…
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor. However, While the BLTouch sensor and clones all seem to…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
This is a simple multi-material, low-profile vibration dampener that utilizes thermoplastic polyurethane (TPU). The dampener itself is crafted from TPU for its excellent shock-absorbing properties, while the base is made from PETG,…
After removing the original cover, the contacts on the switch are open at 230 V. If you lift the printer at the bottom, you can easily touch them. This is prevented by the cover. M3 hammer nuts for 20x20 profiles and M3x10 screws are also…
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
Tradrack MMU Modified as required to suit my needs. Works flawlessly now with these mods so thought I would share. Mods listed below. Mount for BTT encoder instead of Binky (Could never get binky to work accurately , BTT encoder works…
Part cooling duct for biqu h2 and biqu microprobe mount. Need 2x m3x3x3.5 heat set inserts for fixing the 5015 fan and 2x m3x3x3.5 heat set inserts for fixing the probe. Added v2 for less supports when printing. Apply some glue to…
I've been using belt tensioners for both X & Y axis's puller design by fessyFOO rather happily for some time now. I didn't particularly care for fessyFOO's nut design as it's so small and difficult for me to grip, so I was using yac's “A…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes except for the face where there are different air options. You will need (2) 4x1.5mm round magnets available: here Glue to install…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes closed except for the Full face where there are different air options. I use this tool head currently. You will need (2) 4x1.5mm…
The original version from Acker_666 didn't fit perfectly on my new Artillery Genius printer. That's the reason why I had to redesign and improve it. I have added a vertical wall so that the Flex/Cable does not exert all the force when…
remix of oldcrazyeye wago mount, made for wago clone but should be able to use the real one
Ultimaker S3 Spool Holder for generic filament. Design to be printed without support. No tool required. Clips on the Ultimaker s3. Design to be used with extra bowden on the feeding block (step motor block).
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
I've redesigned pfte bracket with fittings I have at home.
This remix adds M2 hex nut slots in the bottom. Using M2x12 or longer screws you can raise the lid to adjust fit and tightness of the z-coupler inside the frame. I made this remix as my SV06 Plus' z-coupler did not fit inside the original…
screw existing power plug through the electronics panel and use the mount as intended for the screws to fasten to
Instalment of Ender 3 Non Pro model DIN rail mount for PSU adjusted for fitment
Sturdier RatRig 4 VCore Front Clamp with more clamping force
Basic BigTreeTech ADXL345 accelerometer to mount to the 4010 axial fan that comes with Creality Stock Hotends. Screws Needed: M3x4 (Mounting the ADXL325) M3x14-20 (Possibly even bigger. This depends on your current setup. I needed M3x16.…
This is a bottom panel for your Rook MK1 Printable in 4 pieces on the rook itself. The M3 screws to the skirts hold it in place, so you might want to get those as well. (they are not printable on the Rook MK1 yet, working on it) The M5…
I decided that the clip on filter covers were a good spot to place a cheap hygrometer I had laying around. I am using it more as a chamber temperature sensor. There is a bottom or top mount for the cover. Cover should fit any of the…
This is an extrusion frame mount for the Chitu 5 (v5) touchscreen (RXA-050001 model). This features 5mm mount points for your convenience. The face plate and the board half mate with each other, eliminating the need for glue. Screen:…
Didn't see anyone with a poop chute that went around the Qidi Plus 4 yet. So I decided to slap one together. By no means is this one the best design, but maybe it's a good start for someone to remix? It's not perfect and there are…
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Devil Girl silhouette air hole on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
If you have a Mars 5 Ultra and want to wash the entire build plate in the Mercury Wash Station (the model PRIOR to the new one released Nov 2024) like I did, there wasn't any way to hang the build plate inside. I prefer washing the…
Small LED strip holder for Rostock 301 delta printer with 10mm rods at 60mm distance. You will need 64mm length of 15mm width aluminum led extrusion and piece of any 12/24v led strip.
I basically had nothing but issues printing the original file. I changes some things to make it able to print without any support and made it a tad larger to give a few more walls to the thinnest spots. I printed in PLA+ with a .16 layer…
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
This is a mount for the BTT PiggyBack36 to suit the Orbiter 2.0 extruder. M3 5mm OD 4mm Length heat inserts.
I was having issues with the front corners of magnetic build plate lifting up during prints that span most of the plate, so I made this clip to hold the front corners down. The hole on the bottom of the clip is so it attaches itself to…
A Printed flex coupler, the center flex section is a printed mold for silicone. I printed mine in PET-G. Coup.plastV2 and Shaft plug are printed together, to form the mold. As an alternative you could print the canter in TPU, I have not…
Active carbon scrubbers need a lot of mass to be effective against VOCs. There're plenty designs to add scrubber to Q1 PRO, but I'm not sure how much they really help. But even a small HEPA can do a good job filtering small particles, so…
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
UPDATE: A working print head mount is now posted. My original was too high and would not home successfully. And Valerie Moore did a nice cleanup job on that if you are a perfectionist and want the nicest looking hidden surfaces! I have…
you can connect the knomi on any usb port from the motherboard just use the 5v and ground also the uart port can be used here is the motherboard diagram Later Edit 28. November 2024 modified the Knob and the Knomi holder. made them a…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
Not recommended for beginners. also available on Makerworld https://makerworld.com/en/models/1636170-mmu-multi-material-upgrade-diy#profileId-1728491 The Pico MMU is an open-source project designed to enable multi-material 3D printing on…
english :If you are looking for a pulley that doesn't make noise for your cr10, and that has conical tabs, here is your file, I looked online for a compatible file for the printer and couldn't find it, so I decided to model it For those…
Print as shown in the picture (layer 0.12), without supports inside. Build of Materials: Switch OMRON D2F-5 (use NO) - 1pcs. Connector jst 2p 1.27 - 1pcs. Steel ball 5mm - 1pcs. ECAS04 (remove the rubber part) - 1pcs. M2x12 - 2pcs.…
![Rook 2020 MK2 & Scalable MK2 M5 Idler blocks [MK2]](https://media.printables.com/media/prints/1034193/images/7845167_bfd54e39-994f-4069-a3c6-44e2b49c3e21_a10bfcf2-06be-4ddd-98e9-dd113f4ce1a2/img_20241009_125921.jpg)
