Search results: asp

Sort order

8,641 models

P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant

Downloads
22,705
Likes
5,392
Rating
4.92
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant

Downloads
12,788
Likes
2,251
Rating
4.96
P
PrintablesNikolica

Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print)

🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9,101
Likes
604
Rating
4.87
P
PrintablesMarius

Slim Raspberry Pi Zero W Case

24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant

Downloads
8,755
Likes
1,067
Rating
4.85
P
PrintablesJan Štech

Bottle Wasp Trap

The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7,414
Likes
2,600
Rating
4.84
P
PrintablesRobert

19" 1U Rack with Moduler trays for Raspberry Pis

This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,147
Likes
828
Rating
4.84
P
PrintablesINUX3D

The TerraPi X , Prusa Edition - Single SSD Case for Raspberry Pi (all models)

This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,681
Likes
874
Rating
4.81
P
PrintablesMichael

Raspberry PI Zero 2 (W) case

Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws

Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,533
Likes
231
Rating
4.94
P
PrintablesCarter

SnapCase For Raspberry Pi4B

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
3,448
Likes
713
Rating
4.96
P
PrintablesLuluX

Raspberry Pi Zero case

One more case for Raspberry Pi Zero. This is simple, compact and quite rigid. The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and…

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,055
Likes
331
Rating
4.7
P
Printablesdimo414

Slim Raspberry Pi Zero W2 Snap-fit Case

Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,848
Likes
266
Rating
4.77
P

Raspberry Pi 5 Case (customisable)

This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant

Downloads
1,394
Likes
69
Rating
5
P
Printablestur_bo_des_ign

Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp protection - wasp screen - mosquito protection

Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
936
Likes
42
Rating
4.5
P
PrintablesRojikku

Raspberry Pi Touch Display 2 Case

A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…

Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant

Downloads
915
Likes
42
Rating
4.5
P
PrintablesLilifee

Raspberry pi zero webcam (HQ camera)

Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…

Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant

Downloads
861
Likes
163
Rating
4.75
P
Printableskjrps

Wespennest-Attrappe / wasp nest dummy

Deutsch: Wenn eine Wespe kommt und sieht das fremde Nest, dann verzieht sie sich in der Meinung, dass da schon ein Wespenvolk angesiedelt ist. (So ist zumindest der Werbespruch). Skalieren Sie wie gewünscht, ich druckte es mit 90%. Nutzen…

Print approx. €6.88–€8.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
844
Likes
117
Rating
4.86
P
PrintablesIan Foulds

Mason Jar Wasp Trap

This print is a threaded to be a standard mason jar lid. Just put some bait in the jar and the pests fly in and are unable to find their way out. Has a convenient spot to hang the trap should you want to. I suggest not using sweet bait as…

Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant

Downloads
837
Likes
309
Rating
5
P
Printablesjohn3volts3

USB to Dupont adapter for power supply 5V Arduino Raspberry Pi (Remix)

A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
833
Likes
273
Rating
4.71
P
PrintablesPeter Farell

Biblical Magus Gaspar

Biblical Magus Gaspar who brought the Frankincense.

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant

Downloads
718
Likes
127
Rating
0
P
PrintablesAdafruit

OctoPrint Raspberry Pi Rig 3.5" PiTFT Touch Display

UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…

Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant

Downloads
614
Likes
156
Rating
5
P
PrintablesDoug

Swivel Side Mount Adapter for Raspberry Pi Camera v2 3030 2020 Mount

I love the simplicity of the design of the Raspberry Pi Camera v2 3030 2020 Mount. Only issue, was that my camera angle was extremely high using the LACK enclosure. I wanted to keep the same design, but provide an option to have it side…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
521
Likes
60
Rating
5
P
PrintablesAlastorsNight

Raspberry Pi4 case for Prusa MK3 - Remix

A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
508
Likes
103
Rating
4.89
P
PrintablesHD_Creator

RaspberryPi 4 reference model for housing designs

I was designing a housing for a RaspberryPi 4 and wanted a simple reference model to design the housing around, so I created this. For me it worked great, the real RaspberryPi 4 board did fit like a glove to the designed housing which is…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
374
Likes
21
Rating
0
P
PrintablesBloodyT

Raspberry Pi 4 / Pi 5 DIN Rail Mount with M3 Rivet Nuts

First of all - Thanks to uwearzt! Also thanks for sharing the Fusion360-File. This helped a ton! I modified his nice, minimalistic Din-Mount for the Pi4 / Pi5 a bit to use my M3 rivet nuts to fix the Pi4 without any Spacers and other…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant

Downloads
333
Likes
38
Rating
4
P
Printablesdurfu

Raspberry Pi Articulating Night Vision Camera Mount

A simple remix to add the ball mount to the back of a PRI Night Vision Camera Mount. Print instructions Print with supports on build plate only.

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant

Downloads
310
Likes
40
Rating
5
P
PrintablesFalco

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

Print approx. €4.39–€5.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
288
Likes
41
Rating
4.83
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
67
Rating
0
P
PrintablesPetr Jajtner

Víčko na plechovku proti vosám / Lid for cans with wasp protection

Jednoduchá konstrukce víčka na plechovku jako ochrana proti vosám. Oba díly se pouze zacvaknou do sebe a víčko je připravené k použití. ----- Simple construction of the lid on the can as a protection against wasps. The two parts just snap…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
9
Rating
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
12
Rating
3
P
PrintablesToWcH

Raspberry Pi5 Case (Exposed Cooler)

Raspberry Pi5 case with the cpu cooler fully exposed

Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
15
Rating
5
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
55
Rating
0
P
PrintablesSimon Jolmers

Raspberry Pi 4 B Case and sonoff 3.0 - Home Assistant

A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.

Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
17
Rating
4
P
Printableswhimmel

Raspberry Pi 5 Breadboard Case

Same as the original, but with some relief for the power button.

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
15
Rating
0
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
10
Rating
0
P
PrintablesLvcas CZ

Nasal aspirator / Nosní odsávačka

Spare parts for the nasal aspirator from Ranyak. Parts can be combined. The manufacturer used a fragile material and cracks will form when dropped and the parts will not hold together, see photo. I reinforced the walls to prevent…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
17
Rating
0
P
PrintablesIvan G

Raspberry pi 4 Case with HDMI to CSI-2 C790 and Fan.

The model does not require any supports.

Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
6
Rating
0
P
PrintablesFalco

Raspberry Pi4

Filament : Devil Design. Green Transparent. PETG 0.20mm. 20% Infill: Honeycomb. Nozzle 230c. Bed 70c. Support : None.

Print approx. €4.48–€5.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
115
Likes
14
Rating
4.5
P
PrintablesKopr

Prusa Enclosure Raspberry Pi Camera modification (with Software installer)

Useful links first Download PDF User Manual (Build guide) Github repository with the software installer Latest script release page Support thread on Prusa Forum Introduction This is a small modification of Prusa Enclosure which offers an…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
114
Likes
67
Rating
5
P

10" Rack Raspberry Pi5 Shelf

10" Rack Raspberry Pi5 Shelf.

Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
35
Rating
0
P
PrintablesJiri Blazek

Raspberry Pi 4B Box (Noctua Fan variable)

Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
8
Rating
5
P
Printablesheximcz

Raspberry Pico W - BME680

Box for the gas sensor BME680. Project https://github.com/heximcz/raspberry-pico-mqtt-bme680 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 15% Filament: Design Devil PET-G…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
31
Rating
5
P
Printablescristi.a.lupu

Raspberry Pi AllSky camera

Case to build AllSky camera using UnderWaterDome…

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
18
Rating
5
P
PrintablesmC_rOMeo

Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board

I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…

Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
100
Likes
3
Rating
0
P
PrintablesAryser

Fruit Fly/Wasp Trap for PET Bottle

Be award, insects belong to the ecosystem like all beeings! Print in one or two colors. The colour of the cap might influence the success rate. Fruit colors like yellow orange should be best. After printing clean the entering tunnel. Any…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
19
Rating
0
P
PrintablesAxel

Raspberry pi Pico keypad 20 switches (Top plate)

The switch plate to a small Raspberry Pi Pico powered keypad. Switch holes are sized for Kailh switches, similar sized ones should fit. This keypad is designed to fit four M3x10mm socket head bolts and four M3 nuts. The bottom case…

Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
13
Rating
0
P
PrintablesAxel

Raspberry pi Pico keypad 20 switches (Bottom case)

The case to a small Raspberry Pi Pico powered keypad. The case has a mounting point for a Raspberry Pi Pico where two pegs can be squished with a hot metal object securing the Pi Pico. This keypad is designed to fit four M3x10mm socket…

Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
13
Rating
0
P
PrintablesMichael

Raspberry Pi Camera Mount for IKEA Stuva

This is a mount for the Raspberry Pi Camera to fit with a nice IKEA Stuva mount I found on thingiverse. Please note that only the part that holds the Pi camera is included. Donload the additional parts from the original creator on…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
86
Likes
14
Rating
5
P
PrintablesVSVlab

Smoke extractor for tin soldering / Aspirateur à fumée pour le soudage à l'étain

EN Use a fan that prioritizes pressure, not air volume (CPU or watercooling fan, not case fan) On the picture a very practical Enermax model with its three speed selector For the fixation you can use fan screws or M4 inserts Good print FR…

Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant

Downloads
86
Likes
15
Rating
0
P
Printablesheximcz

Waveshare 7" LCD / Raspberry Pi Development Holder

Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED

Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
86
Likes
7
Rating
0
P
Printablesnologoearth

SH!ELD zero - Case for Banana Pi BPI-M2 ZERO or Raspberry Pi Zero 2 W

Design Both the Banana and the Raspberry Zero are great little devices but especially the Banana definitely needs cooling, active if possible. An antenna to improve WiFi connection is also an add on you might want to have. This design…

Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant

Downloads
84
Likes
12
Rating
4
P
PrintablesbyCx

RaspiRack: a rack for a lot of Raspberry Pis 2/3/4

This is my personal project of modular rack designed around Raspberry Pi 4. The rack comes with blades for: 5V/14A power supply Universal Raspberry Pi holder (works for RPis 2/3/4) USB 3-SATA converter 1 Gbit ethernet switch Beside these…

Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
15
Rating
0
P
PrintablesMarv

4.3 LCD (WaveShare) Cover, Raspberry Pi 4

Here you find another LCD Cover. It´s for an 4.3 Waveshare LCD with Raspberry Pi attached. It can be installed apart from the printer for e.g. under the Printer Encloser as I did, with 4x Wood Screws. In the pictures you see Rev. 1.…

Print approx. €8.44–€10.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
12
Rating
4
P
PrintablesRob Latour

Raspberry Pi 5 + Active Cooler + M.2 Hat + M.2 PCIE 2 Port SATA Adapter

This case, a remix of this model by Pyrho , accommodates a Raspberry Pi 5, Raspberry Pi 5 Active Cooler, Raspberry M.2 Hat, and PCIE M.2 2 Port SATA adapter. It requires four M2.5x10 screws to replace the four of the eight shorter M2.5…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
13
Rating
0
P
Printablesjandi

Raspberry Pi3B/3B+ Case tweaked - Bottom mountable for Prusa Mini/Mini+

This is a remix of the raspberry pi3 case, originally designed by Joe and remixed by Wilts01 to enable bottom mount. Thanks to all original creators! Changes in remix: Remove the side mount, the side wall is flat again Added 4 bottom…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
5
Rating
5
P
Printablescrokobacon

Nozzle view cam adjustable mount for Raspberry Pi Camera (Circular and Square)

UPDATE : just made a new version with other adjustments. Now the cam is a little more in a back position than before. _________________________________ Hi all, I couldn't find a proper Pi camera mount with a real nozzle view so i made one…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
17
Rating
3
P
PrintablesHWA

Grasping at Can SUP Drink Holder Remix

Printed In PETG @ .2. Have included files for one color and also for MMU.

Print approx. €13.39–€16.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
57
Likes
18
Rating
0
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
15
Rating
5
P
PrintablesBeelsebob

Raspberry Pi HQ Camera Mount

A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
24
Rating
0
P
PrintablesPetr Jajtner

Vosolapka / wasp trap

Model je možné tisknout tak, jak je, tedy bez podpěr či jiné výrazné změny parametrů tiskárny --- The model can be printed as it is, i.e. without supports or other significant changes to the printer parameters

Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
2
Rating
0
P
PrintablesMarcus

Lid for Raspberry Pi Zero (W) case with 6 or all GPIO Pins accessible

Updated lids for the original case which allows to access the first 6 or all GPIO pins.

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
2
Rating
0
P
PrintablesRosti

Wasp Stopper

Wasps can be a pain around sweet or alcoholic drinks. Even worse they can be a literal pain if they get into a can that you drink from because you don’t know they are there. Use a FOW Wasp Stopper. Fits easily into the opening of a…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
12
Rating
5
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
2
Rating
0
P
PrintablesHussain

Raspberry Pi 4 Passive Aluminium Heatsink Case Mount for Original Prusa Enclosure

This is a remixed Raspberry Pi 4 mount made to fit the Passive Aluminium Case Mount for Original Prusa Enclosure. I have designed the raspberry pi can be removed from the top with ease. Also I have added windows to vent out the heatsink…

Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
7
Rating
5
P
PrintablesXTramp

Raspberry Pi 4B Prusa i3 MK2 / MK3 Mount

I found the bottom lid from Laurent's Lab and modified it for my MMU2 . The original case from Geekbox has a very long delivery time, so I found the upper part from Alec with a fan. This is intended for snap-in, and so I can't use it with…

Print approx. €2.34–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
41
Likes
8
Rating
0
P
Printablesxanderthol

Raspberry Pi Zero Stack Plate

I made this plate to stack my Raspberry Pi zeros and zero 2s. The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
2
Rating
0
P
Printablesoltas

raspbery pi zerow camera housing

Simple housing of raspi zero and camera module. V3 puts the camera in the middle of the housing. V3 do not use screws for the camera module. Freecad files are included for easy adaption of your needs.

Print approx. €3.45–€4.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
2
Rating
0
P
PrintablesOld Machinist

StewMac Dragon Hand Cut Rasp File Handle

Simple slim handle designed to fit the somewhat non-typical stem shape of the StewMac dragon hand cut rasp/files. I only have the small size to verify fit, the design may fit the larger sizes I just can't confirm that.

Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
7
Rating
0
P
PrintablesDan Rogers

Attractive case for Eleclab 7" Rev C screen and Raspberry Pi

Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
35
Likes
3
Rating
0
P
Printablesimpulse1delta

Raspberry Pi 1A+/3A+ case with HQ camera mount

Case for Raspberry Pi 1A+ / 3A+ with mounting solution for the Raspberry Pi High Quality (HQ) Camera. The CSI cable is contained withing the case. Features: compatible Raspberry Pi A+ and 3A+ Mounting for Raspberry Pi Camera HQ CSI cable…

Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
5
Rating
0
P
Printablesjohndoe

Litelok X3 clasp BMW Vario top case

I have a Litelok X3 for my motorcycle. When riding, I put it in my BMW vario top box but it rattles around and smashes about whenever I go over speed humps. So I wanted something that would let me strap it in place in the top box. I…

Print approx. €3.22–€3.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
4
Rating
0
P
PrintablesAlberto

raspador de cama de impresora

despega las impresiones 3d de tu cama sin la molestia de quitarla y ponerla

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
5
Rating
0
P
PrintablesPavelD

Case for Raspberry pi Zero, IQaudio Zero DAC and rotary encoder

It is just two separate parts, connected by one screw. The LCD, encoder, Raspberry pi and DAC are also bolted together.(Access to the screws could be optimized further). But the final print accomplished what I needed from it.

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
4
Rating
0
P
PrintablesTache

Prusa Mount for Squirrelbrain's Raspberry Pi Cases

This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
4
Rating
5
P
PrintablesPrinter Go Brrr

Satscase for Raspberry Pi 4

Print your own Node case. I'm open sourcing this one, it's the V1 as I've moved on to selling the V2. Use Gcode at your own risk.

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
5
Rating
0
P
Printablesoktkas

Raspberry Pi3B/+ magnetic case & mount for Prusa MK2/MK2.5/MK3

You need 4x 12x2mm magnets and 2x countersink M3 screws. Don't forget to add a print pause to insert the magnets into the mount.

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
6
Rating
0
P
PrintablesPetr Šlachta

Raspberry pi 4b case with SSD drive slot

Modification of original Malolo's screw-less Raspberry case - “Bottom_Base_SM” with additional slot for SSD drive's PCB ! Make sure to adjust the pillars spacing to fit the holes of your PCB ! Instructions: Pop open your SSD drive and…

Print approx. €1.99–€2.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
3
Rating
0
P
PrintablesJagesh

Raspberry Pi 4/4B Mount for GeeekPi Case on MK3/MK3S/MK3S+

Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
5
Rating
0
P
PrintablesXTramp

Raspberry Pi 4B Mount for Prusa MK2/s MK3/S with MMU2 (Octopi/Octoprint)

Awesome idea of Laurent's Lab to modify Geekwork's aluminum case to mount on the Prusa frame. I mounted an MMU2 and the LED Light Bar Prusa i3 MK2/MK3 so I modified the case to get space for the cables and secure them with two cable ties.…

Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
1
Rating
0
P
PrintablesGlmc89

Ubiquit rack mount, USG, Ubi Switch, Raspberry Pi

20% infill SwitchRack benötigt Stützen Es benötigt eine kleine Schraube um den Switch zu befestigen damit er beim ein- / austecken nicht verutscht

Print approx. €4.57–€5.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
5
Rating
0
P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell 1908FPc Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a 1908FPc monitor and a 3D printed bracket that…

Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
4
Rating
0
P
PrintablesNikosSprocket

Combined rail mount for Raspberry Pi 4 and BTT U2C CAN board

There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
5
Rating
0
P
PrintablesEmanuele

Manopola Cappa Aspirazione IKEA

Semplice Manopola come ricambio per cappa aspirazione cucina

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
1
Rating
0
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0
P
Printablesadesir

Manchon pour gabarit Wolfcraft 4686 avec embout d'aspiration Festool

Pour raccorder un embout d'aspiration Festool au gabarit de perçage Wolfcraft 4686 https://www.wolfcraft.com/products/wolfcraft/fr/EUR/Bestellvarianten/Bestellvariante-extern/Guide-de-perçage-mobile/p/P_4686 Inclut les ergots de blocage…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
1
Rating
0
P
Printablesinvisiblefmx

SD Accessible Bottom for Modular Snap Together Case for Raspberry Pi 2B/3B/3B+

Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+

Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
3
Rating
0
P
PrintablesCrami

Raspberry PI 4 Holder for Prusa Enclosure

A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html Prints without Support. Recommend 3 perimeters and 20% infill. Only needs two M3 Screws and nuts to mount to the…

Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
2
Rating
0
P
PrintablesSebastian

Raspberry Pi 5 Case with Logo

Updated the Case with the RPi Logo. I encluded the project file from prusa slicer, as well as my bgcode sliced with four colors. 1: Case color 2: Black logo borders 3: Green leafs 4: Red parts. Everything sliced for my single extruder MK4…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
1
Rating
0
P
Printables3ric74

Ball Mount Raspberry Pi4 Kit Labists

J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
1
Rating
0
P
Printablesdrsiago

Wasp pencils & stuff nest

The hexagonal holders are separated into 4 parts that need to be glued: top, middletop, middle bottom and bottom. The stand is also separated into 2 parts, left and right side that once glued just need to be pushed into the hexagons.

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
6
Rating
0
P
PrintablesMunich3DThinker

Raspberry Pi Radio Case

Parts needed Raspberry Pi 3B+ IQAudio DAC Pro Official RaspberryPi Touchscreen 7" (Version 1) Rotary encoder KY-040 (axle diameter: 6mm) 4x Hexagon socket head cap screws M2x5 mm 2x Heatset inserts M2x4x3.2 mm (for both sides of the inner…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
3
Rating
0
P
PrintablesHardel

bell clochette raspydarts flechette toys

Voici les liens de la cloche et du solenoide https://a.aliexpress.com/_EHzyeX5 https://a.aliexpress.com/_EGbmk8J

Print approx. €3.62–€4.43 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
0
Rating
0
P
PrintablesPetrusJPrinsloo

Case for Raspberry Pi 5 with 4.3inch HDMI LCD (B) 800x480

I got this screen that is super compact with the Pi and had fun designing a case for it. The idea was to do it with one part so it can easily just slide in and out. The screen was called the "4.3inch HDMI LCD (B) - 800x480 - IPS -…

Print approx. €4.21–€5.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
1
Rating
0
P
PrintablesVorpal

Adapter from Raspberry Pi 5 case to NVME SSD hat

Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
3
Rating
0
P
PrintablesMitsuolevel

NASASpaceflight starship hug emoji

i thought this would be a cool print for space and spacex fans i found that printing the stand upside down was a rough to remove the supports

Print approx. €7.34–€8.97 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
1
Rating
0
P
PrintablesIcegianter

Cover for Raspberry Board

Dimensions: 105 mm x 100 mm x 46 mm Parts Included: Raspberry board cover Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…

Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
0
Rating
0
P
PrintablesKikeMaker

Tapa para aspiradora - Vacuum cleaner cover

NO requiere soportes. Fácil de imprimir.

Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
PrintablesNina Máčová

Battile by Brevetti Montolit vibrating aspirator handle (tool handle) - Náhradní rukojeť na vibrační odsávačku

Thread a stiff wire or piece of nail through the hole and glue it in place, then hook the handle into the aspirator. Use the most durable filament possible. Brevetti MONTOLIT Battile elektrická vibrační přísavka od 5 797 Kč - Zbozi.cz

Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
2
Rating
5
P
PrintablesSTSUL.CZ

háček na pasparty

3mf model 4 háčků pro pasparty i v gcode, tisk 0.2mm 40 minut. Jeden háček pak samotný se tiskne 12 min. Háček je na 2 vrty do zdi o 4-5 mm na hmožděnku. Výhodou háčku je, není že není vidět nad obrazem. Určeno pro PLA a tvrdší.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesRoman Huante

Raspberry Pi and Adafruit Perma-Proto Board Case for Prusa i3MK3

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…

Print approx. €9.25–€11.31 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesAndiPrusa

Tischhalter für Raspberry

Halter für Rsapberry, kann an eine Tisch/ Rohr mit einem Durchmesser von 40mm befestigt werden. Befestigungsschrauben/ Muutern M3

Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
0
Rating
0