Search results: fil

Sort order

46,513 models

P
Printablessoozafone

DUMMY 13 Printable Jointed Figure (BETA FILES)

HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…

Downloads
225,228
Likes
23,715
Rating
4.91
P
PrintablesExtrutim

Filament Clip | Grandma's Favorite Filament Clip

A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…

Downloads
156,666
Likes
33,561
Rating
4.86
P
PrintablesNight Raid
18+

The source marked this model as adult content.

Downloads
49,199
Likes
12,528
Rating
4.75
P
Printablesvictornpb

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…

Downloads
47,015
Likes
16,464
Rating
4.9
P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Downloads
39,451
Likes
3,967
Rating
4.78
P
Printables3DPrintM.D.

Simple Universal Filament Clip V2+ {NEW 2024 VERSION}

Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…

Downloads
26,342
Likes
4,543
Rating
4.81
P
PrintablesExtrutim

Filament Sample Box | Infill / Color Swatch | Fully Printable

Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…

Downloads
21,325
Likes
9,113
Rating
4.91
P
PrintablesK2_Kevin

Filament Clip - K2 Clip

K2 Clip The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to "float" on your filament spool while printing. Extra secure storage using the locking…

Downloads
18,217
Likes
3,120
Rating
4.82
P
PrintablesArea51

Filament Splicing Jig (Remix)

Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…

Downloads
12,076
Likes
1,867
Rating
4.72
P
PrintablesExtrutim

Helix Test Cube / Filament Sample / XYZ Calibration

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…

Downloads
11,972
Likes
1,048
Rating
4.93
P
PrintablesZahg

Filament sample with box

Also check out the rugged box. Filament samples with a box with space for 30 pcs. One sample in PLA with standard settings for Prusa takes about 20 minutes to print. The box took me a little more than 5 hours. Three fields that are 0.2,…

Downloads
11,490
Likes
2,384
Rating
4.93
P
PrintablesGlennovitS 3D

Gridfinity Box (Quick print, lite version, less filament!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
9,726
Likes
1,316
Rating
4.97
P
PrintablesHaydn Bao

Meta Quest 3 - Quest 2 Head Strap adapter (now with STEP file)

This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…

Downloads
9,427
Likes
449
Rating
4.7
P
PrintablesHugoG

Filler - Filament Holder

This design solves all the basic necessities: Fits almost every object with a flat top surface and printer frame when customized. Can easily hold the weight of 1+ kg spools. Fits between other spools if necessary. In addition to the…

Downloads
8,694
Likes
1,711
Rating
4.89
P
PrintablesValec

Filament clip

Filament clip, easy to print and use. EDIT: added clip for slim spool

Downloads
8,041
Likes
590
Rating
4.45
P
PrintablesMolodos

Elegoo Neptune 3 and 4 replacement filament spool holder

A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…

Downloads
7,737
Likes
814
Rating
4.99
P
PrintablesKimframes

Filament Clip with Screw SE

Second edition of the 1.75mm filament clip with screw. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from original filament clip. What's new compared to original…

Downloads
6,537
Likes
659
Rating
4.6
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Downloads
6,403
Likes
360
Rating
4.89
P
PrintablesAikoly

Filament Sample Spool (honeycomb)

This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…

Downloads
5,822
Likes
835
Rating
4.91
P
PrintablesWebbes

Cherry MX Low Profile Keycap

This is a keycap for the low profile Cherry MX1B-L2NA switch. It prints perfectly on a Prusa Mini with 0.15 mm layer height. The keycap is easy to put on, doesn't fall off and is still easy to take off. Created this basic keycap in…

Downloads
5,277
Likes
361
Rating
4.85
P
PrintablesArea51

Prusa i3 MK Filament Guide ClipOn

The Prusa i3 kit comes without a filament guide - this is a problem when using stiffer filaments on small spools. The filament tend to unwind and get stuck when printing. This filament guide is a two part solution, a base with a new…

Downloads
5,209
Likes
529
Rating
4.9
P
PrintablesPotato Factory

Machinist Jack (Parametric Files Included)

Basically this is a long screw and nut that can be used to support pretty much whatever needs supporting. In my case I made this to support my GPU since I noticed some deformation in the PCB from sag. These jacks use a metric trapezoidal…

Downloads
4,896
Likes
396
Rating
4.9
P
Printablesishikawats

Filament Quick Clamp V2

This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…

Downloads
4,877
Likes
1,928
Rating
4.81
P
PrintablesJosef Adamcik

MTG Commander Deck Box (with parametrized Fusion360 file)

MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…

Downloads
4,811
Likes
335
Rating
4.59
P
PrintablesBuggi

T-Nut M3, M4, M5 for 20mm profile

These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…

Downloads
4,467
Likes
198
Rating
4.79
P
PrintablesMarc Bresson

Parametric stackable cable organizer / winder (one-way or two-way winding) with FreeCAD files

Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…

Downloads
4,389
Likes
582
Rating
4.81
P
PrintablesPastelka

Simple Small Filament Clip

Filament clip … small and simple The clip I used before was attached to the previous winding. This method did not suit me very well, because it was not quite easy to catch the previous winding in the right place so that the free end of…

Downloads
4,378
Likes
1,108
Rating
4.82
P
PrintablesThe Next Layer

Gridfinity Caliper Holder - Low Profile Space Saving

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…

Downloads
4,012
Likes
569
Rating
4.71
P
PrintablesDET-Man

PTFE Tube Cap with Filament Label

This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…

Downloads
3,997
Likes
134
Rating
5
P
PrintablesDAS FILAMENT

MasterSpool - DAS FILAMENT Edition V3.2

Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…

Downloads
3,709
Likes
325
Rating
4.75
P
PrintablesCodeName X

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Downloads
3,536
Likes
1,114
Rating
4.9
P
Printableskennyd1gital

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

Downloads
3,294
Likes
432
Rating
4.93
P
PrintablesMolodos

Filament Samples | Filament Color Swatches

Box for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features Thin walls test (3, 2, 1.5,…

Downloads
3,262
Likes
993
Rating
5
P

ROSA3D FILAMENTS MASTERSPOOL - REUSABLE REFILL DISCS COMPATIBLE WITH AMS

COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…

Downloads
3,120
Likes
182
Rating
4.95
P
PrintablesAlex Ward

Prusa MK3S/MK3s+ Reverse Bowden filament Sensor Cover

Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…

Downloads
3,074
Likes
411
Rating
4.96
P
PrintablesFélix

Silicone caulk profiling kit

This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…

Downloads
3,025
Likes
296
Rating
5
P
PrintablesAMTprojects

Fillet diameter radius gauge | Workshop coaster

What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…

Downloads
2,902
Likes
1,117
Rating
4.85
P
PrintablesClement

Your Color Change Buddy - dual color print filament manager

EDIT : I've added a tighter version of the grip. I'd recommend to try first with the normal version first as it is working perfectly for me and most users, but if you find the grip is too loose you can try the tighter version :) Hi !…

Downloads
2,805
Likes
1,185
Rating
4.88
P
PrintablesTechNerd

AirManagerV2 recirculating air filter for 3d printing enclosure

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…

Downloads
2,702
Likes
1,501
Rating
4.79
P
PrintablesRichard

Articulated tie (STEP file included)

Design: The articulated tie is designed in Fusion360. There are a print in place hinges and one clip to place it on shirt. I would advice to place it on some band as its done with bow tie. Tolerance in hinges is 0,3mm. The design is based…

Downloads
2,549
Likes
718
Rating
4.57
P
PrintablesFrasse16

Filament Spool holder

The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…

Downloads
2,437
Likes
495
Rating
4.92
P
PrintablesTom

InFiDEL - Inline Filament Diameter Estimator (lowcost)

The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…

Downloads
2,424
Likes
676
Rating
5
P

Traffic Cone Kit Card (MMU & filament change) 1:24 and 1:18 scale

Summary Get more than two dozens multicolor traffic cones in one print - or print them single. They also fit the 1:24 car models I have published. Sizes 1:18 = 30.5mm height 1:24 = 22.8mm height Print Print in 0.2mm layer height. No…

Downloads
2,375
Likes
735
Rating
5
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Downloads
2,360
Likes
399
Rating
4.33
P
PrintablesmoWerk

Pool Filter Cartridge Cleaner | Gardena Pressure Nozzle

High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…

Downloads
2,318
Likes
472
Rating
5
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Downloads
2,224
Likes
321
Rating
4.8
P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Downloads
2,193
Likes
222
Rating
4.27

Christmas Tree (Kissmas Tree)(New Files!)

New files as of December 4th, 2022 . including several variations of a star topper for the tree (Regular star, exploding star, topper for the candy platform, a replacement topper, etc.). Also a platform-less tree as requested by another…

Downloads
2,188
Likes
600
Rating
4.98
P
PrintablesAvvarshn

2020 Profile Corner Bracket

Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…

Downloads
2,087
Likes
259
Rating
4.94
P
Printableshardy74

Filament Roller

This is a filament roller which contains some nice features. You need 4 ball bearings (6200ZZ 10x30x9) - the other parts are printed. You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on…

Downloads
2,062
Likes
247
Rating
5
P
PrintablesSumjai

3D printed Filament Dry Box

A 3D printed Filament Dry Box can be printed on Prusa MK3 About the box : The dry box is designed to contain Prusa & Kexcelled filament. Hope it fits standard spools outside the market. Also, you can put silica gel underneath the filament…

Downloads
2,059
Likes
325
Rating
4.88
P
PrintablesEric T

Inland Reusable Filament Spool v2

Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…

Downloads
1,984
Likes
153
Rating
4.73
P
PrintablesFreezingPixels

Freezing Pixels - Infill Drink Coasters - Set of 12

A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…

Downloads
1,972
Likes
555
Rating
4.9
P
PrintablesAlex R

Prusa i3 MK3 Low Profile Spool Holder

The standard Prusa i3 MK3 spool holder is almost totally vertical which makes it take up the most possible space in the height direction. I had a height restriction due to the shelf my printer was going to sit on, so I designed this as a…

Downloads
1,969
Likes
99
Rating
4.81
P
PrintablesYanev

Filament box

Box for filament. It's modified tool box https://www.prusaprinters.org/prints/39729-tool-box-parametric . The groove for the seal is provided directly for filament A82-85 1.75 mm, but maybe it is better with an elastic band 2 mm. In fact,…

Downloads
1,951
Likes
615
Rating
4.8
P
PrintablesMatt Boyer

Infill Samples with Display Case

14 Infill Samples with a case. Everything can be printed on a Prusa MINI . Simply download the 3MF file to PrusaSlicer and change the printer type. I had great success printing them in batches of 2 at a time (split left and right) and I…

Downloads
1,933
Likes
1,360
Rating
4.85
P
PrintablesMrJW

YubiKey 5C NFC Case/Keychain (USB C only) with STEP file

YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…

Downloads
1,815
Likes
159
Rating
4.64
P
Printablesthrutheframe

Activated Carbon Mod for Ikea UPPATVIND Filter

Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…

Downloads
1,764
Likes
468
Rating
4.88
P
PrintablesDelphant

Filament Spool Roller

3D Printed Filament Spool Roller Designed in OnShape. 4x 608 Ball Bearings are required. No glue is necessary. I also added rubber feet for a more stable experience. Printing: Supports necessary for the rollers. Rollers printed vertically…

Downloads
1,757
Likes
101
Rating
4.89
P
PrintablesHackMan3D

HAFC V2 - Hackman Automatic Filament Cutter V2

HAFC V2 – Hackman Automatic Filament Cutter by Hackman3D Here's a link to get the necessary hardware. No partnership or affiliation involved, but since the price is reasonable, I haven't asked for a commission. HAFC Aliexpress Pack back…

Downloads
1,734
Likes
988
Rating
4.9
P
PrintablesPIZZA_CAT

NEEDLE FILE HANDLE

Clamp handle for easy handling of needle files or scrapers for deburring and other post-processing. The principle of clamping the needle file is a collet mechanism. The handle has performed well. You can make any handle size by simply…

Downloads
1,733
Likes
534
Rating
4.85
P
PrintablesXavier Faraudo

Remaining filament scales - no-MMU & parametric

UPDATED 2022-10-14: Many improvements, detailed at the end. TL;DR: New features, more spool models, improvements in printability, adapted to Recymbol 1.1. We all know that spools spin faster at the end, and slower when they're the fullest…

Downloads
1,730
Likes
784
Rating
4.85
P
PrintablesJens Willmer

Simple Filament Swatch

A swatch to compare print color and transparency. This swatch is based on the idea of Jims Filament Swatch . I did not include any fancy test like bridging or overhangs simply because the results have more to do with how the printer is…

Downloads
1,718
Likes
359
Rating
4.96
P
PrintablesCelta

IKEA Kallax Filament Storage Rack

Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…

Downloads
1,691
Likes
626
Rating
4.93
P
PrintablesFabianVeile

Refillable Gravity Pencils + Ergonomic Grip Cover

Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…

Downloads
1,683
Likes
780
Rating
4.56
P
PrintablesHaprog

Filament dryer extension for SilverCrest dehydrator

This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…

Downloads
1,661
Likes
254
Rating
5
P
PrintablesThomas Mergan

Ultimate Filament Sample (with storage box)

I made this filament tag which tells you a lot about your filament. Features: The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch . There is a key ring hole included but it can also be glued to…

Downloads
1,647
Likes
486
Rating
4.84
P
PrintablesMichal Fanta

The Lens Filter Wrench Set

Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771

Downloads
1,646
Likes
224
Rating
4.94
P
PrintablesMichael

Your last spool - Prusament Spool to Refill Adaptor (Masterspool)

Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…

Downloads
1,551
Likes
699
Rating
4.93
P
Printables3DJourney

Ender 3 S1 Filament Swivel guide (supports Capricorn/PTFE tube 4mm OD)

Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…

Downloads
1,543
Likes
285
Rating
4.81
P
PrintablesPrusa Research

Advanced Filtration System Add-on Printable Parts

All printable parts for your Advanced Filtration System Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with Advanced Filtration System. All of the add-ons and community models can be found here . Print…

Downloads
1,535
Likes
249
Rating
5
P
PrintablesArctic3Design

Keychain Fillet Gauge

A simple fillet radius gauge (1 to 10mm) you can have on you at-all-times. Especially useful for those emergencies when you're making a 3D-model and you need the exact fillet size in seconds. I've printed the model with 0.15 layer height…

Downloads
1,514
Likes
344
Rating
5
P
Printablesishikawats

Filament Quick Clamp

This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…

Downloads
1,463
Likes
660
Rating
4.76
P
PrintablesGuillaume3D3

PET Bottles to PET Filament - Give Me Bottles ! / GMB Project

Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…

Downloads
1,448
Likes
1,108
Rating
5
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Downloads
1,443
Likes
135
Rating
4.88
P
PrintablesJV Lobo

Low profile keycap for Keychron K3

I designed this because I couldn't found any low-profile keycaps that would fit my Keychron K3. Print on a resin printer to get the best quality. I also added a version for filament printers with higher tolerances so it fits. I sliced it…

Downloads
1,439
Likes
177
Rating
4.8
P
PrintablesJeroenVermeulen

Prusament Filament Indicator PLA PETG meters grams

A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…

Downloads
1,403
Likes
655
Rating
4.94
P
PrintablesEric T

Sunlu S1 Filament Dryer Lid Support

Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…

Downloads
1,335
Likes
192
Rating
4.91
P
Printablesdjedje_zr7

Parametric Card box (source file include)

Box for 85mmx54mm card 35mm of storage You cant find cards size and height in 3df file parameter. Print an glue 5mmx1mm magnet. (see my board game collection : https://www.prusaprinters.org/social/38889-djedje_zr7/collections/72597 )

Downloads
1,323
Likes
329
Rating
4.81
P
PrintablesMar Ber

pill box for a week - 2 pills a day | incl. fusion-file

English Update 2023-11-02: In the construction file, I removed a few minor errors that occurred when changing the depth. Update: Since PrusaSlicer can now also emboss text, I have added a print configuration file without text. So you can…

Downloads
1,288
Likes
119
Rating
4.83
P
PrintablesAUGU5TO

Calibration Cube - wall thickness - new filament - extrusion

Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…

Downloads
1,267
Likes
89
Rating
4.95
P
PrintablesJellyTitan

Mason Jar lid thread source files

Threads for a standard mason jar lid, built in Fusion 360, fully parametrized, for use in other designs. I couldn't find a fusion360 source file to use in other designs, so i built this to share. It's largely based on the thread pitch in…

Downloads
1,240
Likes
124
Rating
5
P
PrintablesScott

Low Profil Perfect Fit Controller SKADIS mount

Hi! I didn't find any perfect fit low profil controller mount for my SKADIS pegboard so I did one myself. I designed it around a controller 3D scans so that it can be perfectly ajusted while remaining as discreet as possible. Controller…

Downloads
1,238
Likes
353
Rating
5
P
PrintablesmoWerk

Pool & Hot Tub Filter Cartridge Cleaner | Gardena Pressure Nozzle | Compact Remix

Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…

Downloads
1,230
Likes
393
Rating
5
P
Printablesalleycat

Bambu Lab X1 Filament Profile - extrudr greentec pro

To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…

Downloads
1,134
Likes
47
Rating
4.67
P
PrintablesMakkuro

Filament Swatch box with hinged standard swatches

In case you print several filament swatches , you might need a storage solution. This is an improved one, where each swatch has its own slot-in holder which includes a hinge, in order to browse through all the colors/materials quickly.…

Downloads
1,130
Likes
356
Rating
4.83
P
Printablesncsandor

Infill Earrings

Circle earrings for 3D Printer Men's wife or girlfriends. Hexagonal earrings for true lovers of 3D printing. It can be easily scaled up to a pendant. Models are 25mm wide and 1mm thick Print Settings Material: Prusament Ocean Blue Petg…

Downloads
1,119
Likes
350
Rating
4.75
P
Printablesmp42

Drybox filament guide using PTFE tube

Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG

Downloads
1,071
Likes
175
Rating
4.96
P
Printablesder-pw

Prusa Mini/Mini+ 3030-Profile Slot Cover

Slotcover fits for the 3030 profiles of your Mini/Mini+! Please measure the two pieces for the right side. The length depends of the location of the mounting plate for the z-axis. You can adjust the lentgh in your prusa slicer or any…

Downloads
1,067
Likes
269
Rating
4.94
P
Printableskarelv

Prusa i3 MK3s Raspberry Pi4B case profile mount for octopi

My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…

Downloads
1,051
Likes
174
Rating
4.84
P
PrintablesJakub Kříž

Compact Capsule Filler (00 size) with Credit Card Mixture Dispenser

Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…

Downloads
1,020
Likes
109
Rating
4.8
P
Printablesxs-society

Refill MasterSpool - Recycling Fabrik Edition V3.0

Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…

Downloads
994
Likes
315
Rating
3.44
P
Printableshennedo

Low profile right angle cap for Neutrik NC3MXX

Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…

Downloads
990
Likes
91
Rating
4.83
P
Printablesdavidmakes

Fillet diameter radius gauge | 22-40mm edition

Updates 23-03-04 Radius measurement was incorrect due to incorrect application of the ‘decorative’ edge. Resulting in a 0.7mm radius measurement error. This has now been corrected Increased size of text slightly on the joining ledge to…

Downloads
981
Likes
104
Rating
4.79
P
PrintablesVictor

Prusa MK3s+ and MMU3 - Orca Slicer profile

Working profile in Orca Slicer for a Prusa MK3s+ and MMU3. Tested with 1000+ tool changes with no cloggs and only one user error :D This is no longer getting updated since I sold my MMU3. Video guide Step-by-Step video guide Instructions…

Downloads
976
Likes
67
Rating
5
P
PrintablesSembazuru

MK3 Filament Guide

I like how DRÁTENÍK's filament holder clips onto the spool holder instead of the printer frame, but I wanted more clearance above the extruder to the guide. This is both to allow room for my filament wiper sponge holder and my perceived…

Downloads
968
Likes
130
Rating
4.92
P
PrintablesDennis

ECM 58mm Portafilter Tamping Station

For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.

Downloads
967
Likes
105
Rating
5
P
Printables3DPrintscher

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…

Downloads
917
Likes
152
Rating
5
P
PrintablesLeftcetio

DIY Print Bed Filament Dryer

This is an enhanced print bed filament dryer based on Design Prototype Test's video on the topic seen here: https://youtu.be/H1DoJxY6v_U . The air flow has to make a 90 degree turn at the top and bottom, so I used a velocity stack for the…

Downloads
916
Likes
165
Rating
4.9
P
PrintablesOld Machinist

KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve

Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…

Downloads
910
Likes
44
Rating
5