986 models
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This is an individual tray for cards that can be used in board games like as Settlers of Catan (Devir version) or Hare & Tortoise. Esta es una bandeja individual para cartas que pueden usarse en juegos de mesa como Colonos de Catán o La…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Batteries that are known to fit: US models WA3525, WA3575 and WA3669. I printed several other holders, and even the ones that said they were for US models would not hold my 20V Worx PowerShare batteries. Some were way too tight. Some…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
Juste un remix avec 2 trous pour vis fraisées de diamètre 4, et un socle plus épais pour intégrer la fraisure des têtes
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Intro: Living in a shared apartment space can be tricky when it comes to upkeeping basic cleanliness. This three-compartment rack helps solve an issue I had with my neighbors leaving their sponges/toothbrushes/soaps… everywhere, stuff…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
Scarfring or neckerchief based in a patagonian mara. Pasa pañuelos de mara, liebre patagónica
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
About I'm calling this the RAKshare. A bracket for the RAK Unify 180x130x60mm enclosure to mount: RAK 1W booster 19007 / 3401 / 13302 board. Waveshare Solar Power Manager (D). Adafruit INA3221 STEMMA QT board for power monitoring.…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for PETGSource material: PET
Rongorongo : Harekāingakai : My place of peaceful rest and nourishment : : Home Sweet Home Easter Island Version of Home Sweet Home Sign. The gcode includes fillament swaps at z height... So if you dont want that please reslice.
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Les phares de la 2CV sont en cliqués dans 2 pièces plastiques en part inférieure. Le PVC vieillit mal :-( J'ai imprimé en ASA et en FLEX pour avoir un dépannage dans le temps j'ai joint le fichier Fusion qui contient d'autres pièces de 2CV
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Two separate covers for the origin Prusa MK3+ LCD and the Waveshare 5" LCD. Both covers can by stacked for easy storage. It can be printed easily and without support.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This project requires soldering! But don't click away if you've never soldered before, because this was my first electronics soldering project too! All the tips I used to succeed are in the assembly guide. Project Overview I wanted an…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
You shoul use a 4 M3x10 screws to secure a screen to the case.
I would suggest PETG at 0.2 layer height.
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
This is a super slim case for the Waveshare RP2040 Zero. Just enough to protect without bulk. Hope you Like it! I wanted to have access to the buttons, USB C, and Neopixel but still protect it when I toss it in my work bag with other…
"A hare is not a pet but a person. Hares are clever and brave and loving, and they have fairy blood in them. It’s a grand thing to have a hare for a friend. One doesn’t often, because they have a lot of dignity and keep themselves to…
Case for 7inch Capacitive Touch Screen by Waveshare This case is designed for touch use, but still comes with a foldable stand. It also features optional clip holes that allow attachments, such as the provided pen holder (9mm diameter).…
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
Wandhalterung für Werkzeugakku
📺 Raspberry Pi 5 Case for Waveshare 10.1" DSI Display (Landscape Mode) This is a custom 3D-printed case designed for the Waveshare 10.1-inch DSI touchscreen display , configured in landscape orientation . It also houses a Raspberry Pi 5…
This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…
A case that I built specifically for the OGX-Mini / Joypad OS projects, but it actually works for any usage you may have for the Waveshare RP2350-USB-A board. The model is built with very tight tolerances, so depending on your printer you…
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
Raspberry Pi5 PCIe NVMe Case for Waveshare M.2 HAT+ ****************************************************************************************** **Update 21Nov24** There was a small blemish discovered to the button recess. This has now been…
Waveshare recently released a new ESP32-S3 screen. Model name: ESP32-S3-Touch-LCD-4.3 . I'm using this screen for my openHASP installation. You can find .ini file here . I didn't have courage to do the soldering job for backlight as…
Designed a case for the Waveshare 4.3 HDMI display. https://www.waveshare.com/product/raspberry-pi/displays/4.3inch-hdmi-lcd-b.htm Case front and back are assembled without tools. 4 M3x8mm screws are used to connect the bracket. Bracket…
This is a case for waveshare ESP32S3 2.8 inch Display case. With speaker grill, screw, Memory card slot,buttons vent. https://www.waveshare.com/esp32-s3-touch-lcd-2.8.htm
🔵 Flexible Hare 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ I'm working on a big project, so I didn't have much time, but I was sorry not to release any model, so I'm releasing a flexible hare. Follow me on YouTube for more info about what you can look forward…
3D scan of the 'Dürerhase' (Dürer rabbit) by Albrecht Dürer Link to the capture on Luma AI: https://lumalabs.ai/capture/249088fd-83fb-457e-9704-526ae6029f9e?mode=sparkles
I remixed the original model and made some personal improvements. add printed threads for the M3 screws increase size of the screw holes increase clearance for the Raspberry Pi 4 USB and ethernet ports change front case to mount the…
Although there are several models available on another site… I found them all to be unnecessarily too big and complex. Taking inspiration from Area51 's nice and minimal mount for Makita batteries, I set out to design something sturdy and…
This is a case I designed for Raspberry Pi with Waveshare 4.3 inch LCD module which makes a nice setup for running OctoPrint, Klipper/etc. You will need some M3 socket head screws and nuts (DIN912) for securing the lid to the case (6x 6mm…
Cases for Raspberry Pi 4B with POE Hat from Waveshare. PoE HAT B with OLED screen or C without the screen. Bottom and top cases snap together without the need of screws and/or nuts https://www.waveshare.com/poe-hat-b.htm…
This is a displaymount/cover for the 5" Waveshare display. It is created to be used on Vorons. It is mounted to the Voron-Mod "BTT PITFT50 45-degree", which can be found here:…
I created this case for the Waveshare 7.9 inch touch screen in FreeCad. I used the 3d image of the screen the manufacture provided here to setup all the holes and dimensions. https://www.waveshare.com/wiki/7.9inch_HDMI_LCD#Drawing The gap…
Housing for the Raspberry 5 with the Waveshare PoE HAT (F). easy to print, no supports required needs 4 2.5mm screws to assemble, uses the bolts which come with the PoE HAT vents for good air flow access to Raspberry Pi GPIO header
Small press fit case for the Waveshare RP2040 One version of the Raspberry Pi 2040, it also fits the RP2350 One version which is identical in dimensions. Since I mainly use it for PicoKeys so I don't solder to them, I use them as a USB…
A snap-in case for the little Bjorn. Designed to be as petite as possible while not compromising on case integrity. The parts fit snuggly, however, it is relatively easy to disassemble the case if needed. The case also features vents for…
I needed a case for the higher profile waveshare PoE hat and so made this one. This was made so that the pi was completely covered while retaining access to all connections and allowing airflow. The PoE HAT model (B) case has no…
The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…
I have a number of these Waveshare 1.28inch LCD Modules that I want to build things with. This is the base piece for holding one of these screens. I've printed with PLA and PETG. Amazon Link:…
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the WaveShare CM4 IO board with PI 4 Compute Module. The case has a 40mm fan design to blow air across the top then around the side and to the bottom to cool…
Buttons and ports are easily available without the need for tools. All plugs, cables and ports fit perfectly into their slots. Designed to be screwed to a smallrig 1598 cheese plate. (optional) Make sure your printer is properly…
WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…
I modified the inlet of my USB version of this, using the CAD model provided by Waveshare. This requires the Pi be mounted separately and connected with an extended length ribbon cable. You will need to auto generate supports, as the…
7/11/2024 - Added thinner front, for those that intend to put clear plastic over After discussion with creator of Strelok ballistic software, Mr Igor Borisov. Strelok Pro is adding a feature to transfer “Target List” over to an e-paper…
This is a flat pack case for the Raspberry Pi Zero sporting the waveshare POE ethernet and USB hat. HAT in question : Waveshare POE ethernet Benefit of the case: Flat pack design Maximum airflow Has space to have a Pi Zero with headers…
A sleek, protective stand case designed specifically for the Waveshare ESP32-S3 Touch LCD 4.3" display module. Perfect for desk setups, monitoring dashboards, or any project where you want your display looking clean and professional. ✨…
I printed with PLA 20% infill. No Supports Printed standing up There's three models: One button, Two buttons, and one for Three buttons.
I didn't find anything fitting my use-case, so I took the excellent https://www.printables.com/model/427556-ahoydtu-gehause-case-dtu-ahoy-opendtu and https://www.thingiverse.com/thing:4738646 to combine into the above and give enough…
This enclosure is designed for the Waveshare ESP32-S3 Ethernet Development Board with Waveshare PoE Module (B) included in the ESP32-S3-POE-ETH product. It includes dedicated cutouts for: The RJ45 Ethernet port All other interfaces (USB,…
Description: Here's a case to house your Waveshare ESP32 C5– for my particular use case, it's running the Biscuit Node Firmware from Biscuit Shop. This is very much a work in progress and still needs some refinement. Please let me know…
Waveshare's ST3215 digital servo has a fairly complex and odd body shape. This model contains a mount that snugly fits the servo's body. The mount has holes matching the eight mounting holes on the servo for use with the self-tapping…
Moin, hier mal ein kleines Projekt, welches ich entworfen habe. Ich wollte einen kleinen ESP32-C3 Super Mini mit einem Waveshare ePaper / e-Ink Display (2.13") kombinieren und das ganze so klein und modular wie möglich halten. Später wird…
made a mock-up for this board from Waveshare with POE-module and OV2640-camera so that I could build an enclosure around it. The enclosure can be found here Updates 2025-06-15: added LAN-LEDs and WS2812 LED locations
This Worx PowerShare 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. ***PLEASE…
A small case to enclose a raspberry pi compute module with a waveshare nano b board with space to allow for a heat sink. EDIT: Requested, nano A has been added. I do not have the board myself, so feedback welcomed. The idea was to be…
Simple wall holder for Barco Clickshare Button/Dongle. Mount with double sided tape, but let me know if you need a version with hole(s) to mount with screw(s)
I designed this case for the Geekworm X306 UPS shield. It provides constant power via a 18650 Li-Ion battery. You can plug and unplug the USB-C port on the back to charge the battery as needed, without interrupting the operation of the…
This Waveshave 4.3 inch displayholder is designed to fit perfectly onto the VORON V0.1. The skirts i used were from the VORON Trident skirt mod for the VORON V0.1. V0.1 Trident skirt mod:…
This is a case for the 11.9" widescreen by Waveshare, designed to stand at a 25° angle. It is perfect to put under a main monitor to display parameters or serve as a smaller peripheral screen. The way it is designed, the model needs to be…
This is a case for the CM 4 on a Nanobase B Carrier Board with mounted heastink. Components: Raspberry Pi CM 4 : Any variant will do Nano Base Board B : Link to Manufacturers site. Got mine from Amazon CM 4 Heatsink B : Also link to…
Raspberry 4 waveshare 5 inch display cover
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
Spiral Hare Bunny Sculpture Add a touch of modern elegance to your Easter decor with this unique Spiral Hare Bunny Sculpture. Designed with smooth, flowing lines and a striking spiral structure, this piece blends minimalism with organic…
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount. You will need: 8x M3x3.9x5.7 inserts (Ruthex M3) 8x M3x6 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better 50x50 mount strength, mount M4 inserts from the…
Pouzdro (stojan) pro kulatý Waveshare 2.1" displej s ESP32-S3 Tento model mi poslal Radek B. na facebook chiptron.cz - mnohokrát mu za tento model děkuji. Najdete tady dvě verze pouzdra pro kulatý displej Waveshare 2.1" s ESP32-S3. -…
This is a partial case for the 10.1 inch HDMI LCD Touch Screen by Waveshare. (There is only the front part of the case. I did not create the back because I did not need it). Print the front case, Place the screen inside it, and screw the…
Wall mount case for 2.9" E-Paper display module from WaveShare. Case designed on wall and other surfaces which possible wiring through the surface. It's precission window over the display area of the module. You have not other mounting…
I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Allows you to use the "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2"( https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m ) by Sneaks with the Waveshare Raspberry Pi Camera (I) (…
BOM: Waveshare 5" DSI screen 2 x M2 self-tapping screws 2 x M3*12 BHCS or SHCS 2 x Heatset Insers (M3x5x4) Print the 3 parts and assemble according to the images. The parts are all in the proper orientation for printing. If printing the…
The tablet i was using to control my Klipper system died. I picked up a 7 inch Waveshare LCD on amazon, linked below, and built a mount to attach it to my printer enclosure. https://www.amazon.com/dp/B096KL11X8
See how to create 3d models from AI (image-to-3d / prompt-to-3d) here: https://www.patreon.com/posts/how-to-use-ai-to-120617822 Models in this collection: Rabbitfolk Harengon artificer Rabbitfolk Harengon barbarian Rabbitfolk Harengon…
Winter time, cold time. And when you share an herbal cigarette with friends, unfortunately you don't just share the pleasure. My solution is quite simply a matching herbal cigarette tip, which can also be used as a blunt or joint adapter…
** UPDATE!! ** The file (pattered HQ gun fixed right) Has now been replaced , Which was spotted by and kindly mentioned by a fellow thingiverse member named "jahanzebk" the stl was not a solid model and the added scroll work was not…
Below, translated into English by DeepL Gehäuse für die Ahoy DTU /Open DTU mit Waveshare 1.54 Inch E-Paper Display und Externer Antenne Die Ahoy-DTU / Open-DTU ist geeignet, um die Hoymiles PV Wechselrichter der HM Serie mit dem WLAN zu…
Casing for Raspberry Pi Zero + Waveshare LCD 1.44 - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
Nerf shooting target - Hare Just a simple target with a hare. Designed mainly for Nerf or similar toys.
The March Hare is a character from the 1865 book Alice's Adventures in Wonderland by Lewis Carroll. He is most famous for appearing in the tea party scene where Alice hypothesizes, "The March Hare will be much the most interesting, and…
I created this wall mount so I could use the Waveshare 10.1DP-CAPLCD touchscreen for a home assistant dashboard. It is designed to mount to a 3-gang electrical box. Update for V2 I ended up relocating my raspberry pi out of the wall, i…
A standalone filament pre-gate sensor that uses lever switches instead of the more typical ball bearings and switch approach. This sensor can be used both for the ERCF/Tradrack MMUs using Happy Hare, as well as a standalone filament…
After searching everywhere there are no one that makes monitor case 7 inch waveshare for raspberry pi 3 / 4 that uses HDMI and SPI pinout this model also includes opening for monitor back button setting. the opening of pi usb & lan…
his is a pretty minor tweak of wojciechsura's excellent 7" Waveshare case (thingiverse link) for folks with a "Longrunner" (or similar) brand. The two appear to be identical, but the dimensions are slightly different and the Longrunner…
This is a simple mount to install a Waveshare 5" DSI Touchscreen to your Prusa Bear 2.1. To use it, you require: 1x Screen 1x Raspberry Pi 3B(+) or 4B 4x M3x10 screws Mount the Pi on the Screen without the standoffs. Carefully make sure…
This is a case for a Raspberry Pi 4 model B with a Waveshare UPS hat mounted on top. The Raspberry Pi can be mounted to the base plate using the M2.5 standoffs between the Raspberry Pi and the Waveshare UPS hat. The hat can then be fixed…
So as the summary says a simple replica of waveshare's 4.3 inch lcd with case but for pi 5. The case is almost 100% the same and it has pi5 specific features like the vent holes positioned above the active cooler module. Print Settings:…
Display enclosure for the the 7 inch Waveshare screen. Suitable for the model with 1 x HDMI in and 1 x USB Touch USB input. Uses 4 x M3x10 screws on the back. Update 25.11.2024: Added back panel with VESA Mounting holes Added a VESA Mount
Waveshare ESP32-P4 WiFi 6 7" Touch Display Case (Wall Mount + Desktop Stand) This is a custom-designed enclosure for the Waveshare ESP32-P4 WiFi 6 7-inch 5-Point Touch Display Development Board (1024 × 600), featuring a clean appearance,…
