Search results: k4

Sort order

Counting matching models…

P
PrintablesPrusa Research

Rocket Engine Prusa MK4S/CORE One/Core One L

A variation of our rocket engine sample model with added side nozzles. It's printable completely without supports. If you own the Original Prusa MK4S, CORE One, or CORE One L printer, you'll find pre-sliced version of this model on the…

Print approx. €12.76–€15.60 excl. taxPreliminary estimate for one variant

Downloads
5,640
Likes
661
Rating
4.98
P
Printablesgeektoybox

Temp Tower PLA/PETG/ABS/ASA for MK4

Please don't forget to like the model if you find it useful. Thanks!

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
4,898
Likes
293
Rating
4.83
P
Printablesobri

First Layer Test for Prusa Core One, Mk4, MK4S Testprint calibration (or others)

This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,045
Likes
113
Rating
5
P
Printablessbuerger

Dust Protector for Prusa Mk4 and Mk3 Z-Motors

*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,963
Likes
542
Rating
4.68
P
PrintablesLegufix

MK4 Nextruder nozzle change tool

Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,958
Likes
372
Rating
4.94
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,941
Likes
781
Rating
4.97
P
PrintablesMike81622

Prusa MK4S, XL (09/2024 onward), CORE One and CORE One L xLCD Knob Beauty Ring

Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,380
Likes
383
Rating
4.9
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
891
Likes
203
Rating
4.76
P
Printableswedgeworks

PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping

Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
729
Likes
39
Rating
5
P
PrintablesVisualReversal

Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5, MK3.9 & MK4, MK4S - MMU Not Required)

24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…

Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
707
Likes
160
Rating
4.96
P
Printablesfoorschtbar

Prusa MK4/XL Better LED Status Bar

My MK4 is on a sideboard and stands over the edge. As a result, you can not see the great new LED status bar of the MK4. This model solves the problem my MK4 and also fits in any Prusa XL/MK3.5/MK3.9. It is a small light pipe and fits…

Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
684
Likes
204
Rating
4.97
P
PrintablesTiffi226

Prusa MK3/MK4 build plate holder - steel plate holder // 3 slots

Remix of the model from grooveup - I just needed 3 slots to hold my build plates.

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
674
Likes
51
Rating
4.93
P
PrintablesExtrud3D

Light Prusa MK4/MK4S bin two hooks

I refactored this bin with 1mm wall and better inner fillets to avoid infill for faster printing (2h with IS structural for perfect quality, 1h with speed profile) and require less filament (46g vs 83g for the original model) You must add…

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant

Downloads
574
Likes
107
Rating
4.88
P
PrintablesEnigmaTaco

VFA test gcode for MK4S

Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s. The gcode is a ready to go file for PLA for your MK4S; the 3MF is the PrusaSlicer project, not just the…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
573
Likes
51
Rating
5
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant

Downloads
559
Likes
111
Rating
4.89
P
PrintablesVictor

Prusa MK4(S) and MMU3 - Orca Slicer profile (Beta)

Note: This profile is no longer being worked on. This profile was originally created because many people requested a Prusa MK4 with MMU3 profile. I don’t own a MK4 myself, so the profile is untested by me. While I did receive a bit of…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
514
Likes
40
Rating
5
P
PrintablesPiJey

Takamine TK4NT Acoustic Guitar Preamp Replacement Housing

Motivation The frame of the housing of a Takamine TK4NT acoustic guitar preamp broke, so that the preamp was no longer fixed in the guitar. I designed a replacement housing. Printing I printed the design on a i3 MK3 using PETG, layer…

Print approx. €5.02–€6.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
10
Rating
5
P
PrintablesRo3Deee

Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)

As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
380
Likes
53
Rating
4.75
P
PrintablesGralastair Bean

PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
36
Rating
5
P
PrintablesMichal Hlaváč

Prusa MK4 feet (released V2)

Prusa MK4 feet's V2 Changelog increased stability and contact surface 100% infill to reduce springing and transmission selects Print settings material: Prusament PETG layer height: 0.2mm infill: 100% V1 Print settings material: Prusament…

Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
325
Likes
66
Rating
4.75
P
Printablesgrtych

MK4 Bin - Left Side - 2 Hooks

I had no idea you can go into PrusaSlicer, right click the item, mirror along X-Axis, and a right side bin becomes a left side bin. So before I learned this I added a second hook to a single hook left side bin

Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
48
Rating
4.92
P
PrintablesVargaMark

Toolbox for Prusa MK4 (tool holder)

Hi. I've made a simple tool holder for the new MK4. Space for a scraper, a cutter and a tray for some stuff.

Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
77
Rating
4.95
P
PrintablesFlat Badger

Freenove ESP32-Wrover CAM Mount - Prusa MK3 & MK4

A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
273
Likes
32
Rating
5
P
Printablesmozgy

Temp and Bridge Tower - GCodes for MK4 and XL

Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant

Downloads
267
Likes
20
Rating
5
P
PrintablesJLTX

Easy MMU3 Purge Calibration Tool for MK4 and other Nextruder models

This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
258
Likes
98
Rating
5
P
PrintablesUM3D

Prusa MK4 bin left for original Prusa enclosure

printed with: Prusament PLA Galaxy Black support necessary

Print approx. €7.55–€9.22 excl. taxPreliminary estimate for one variant

Downloads
251
Likes
36
Rating
5
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
241
Likes
45
Rating
4.67
P
PrintablesLamboman

MK4S/Core ONE knob ring

Designed for the original MK4S/Core One knob.

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
233
Likes
37
Rating
5

Large Bin System for Original Enclosure & MK4 (Remix)

Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
226
Likes
64
Rating
4.8
P
Printablesmikedmor

Original Prusa Enclosure Mesh Side Boxes for MK4

The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…

Print approx. €6.41–€7.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
213
Likes
41
Rating
5
P
PrintablesTeo_211

Volkswagen Golf Mk4 Wall Art

Volkswagen Golf Mk4 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
212
Likes
45
Rating
5
P
PrintablesDuBDzO

MK4S enclosure LCD mount

MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
33
Rating
3.75
P
PrintablesManfred

MK4S xLCD Display Adapter (new Version) for original Prusa Enclosure

Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…

Print approx. €0.86–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
196
Likes
32
Rating
5
P
Printablesmike

x-axis strain relief for Prusa MK3 and MK4

For this strain relief you'll need: 3x allen bolts M3x10 and 2x M3 square nuts Both should be included in the spare parts bag. Assemble: After printing clean all holes and cut off the brim Push both square nuts in the therefore provided…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
195
Likes
42
Rating
5
P
PrintablesGerald

MK4+MK4S ESP32 Cam Mount

Camera Mount for MK4(S) suitable for Part of MK4 "x-end-motor-R2.stl2" No support

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
192
Likes
59
Rating
4.8
P
PrintablesPrintium 3D

Prusa MK4 Cooling Fan Shroud

Here is an MK4 cooling fan shroud designed to help keep your cooling fan clean. (VH fans, see challenge below) You can use it as; 1. a shroud by itself 2. a shroud with a grill 3. a shroud with the grill and a filter media installed like…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
35
Rating
5
P
PrintablesGregory Verba

MK4 LoveBoard Cover Right Mod

I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
172
Likes
29
Rating
4.57
P
PrintablesZohan#4775

MK4 2 kg / 1 kg Filament spool holder modular for original suitable for a lot of Spool sizes, 3 x 1kg or 2kg + 1kg no Problem

*** 28.02.2024 UPDATE *** Long Filament Guide V2.1 *** 26.02.2024 Publication on Printables *** Recommendation PETG or better. You will need an M 3 x 10 mm screw with nut to fix the filament guide to the main holder. With 1 extension you…

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
168
Likes
28
Rating
5
P
PrintablesEinfachUli

K40 Laser X Axis Cloudray Laser Head with Line Laser V2

This is V2 with 20mm Mounting Hole Distance for the new Cloudray K40 Laser Head with FL 25.4mm and FL 50,8 mm. It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell…

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
17
Rating
5
P
PrintablesINVESTEGATE

Nextruder Hotend Max Flow Benchmark Test for Prusa XL, MK4, MK3.5, MK3.9, Mini

Use this to find out the maximum flow rate of your hotend to print faster. The test was created with the help of this website: https://hotend-flow-tester.netlify.app Thanks also to @CNCKitchen Here you will find further information and…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
160
Likes
61
Rating
0
P
Printableshachleitner

Printer frame mount MMU3 Cassette Compatible Buffer for Prusa MK4/MK4S

UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer UPDATE: 26. November 2024 Adapted the top-buffer-mount for R4 Cassettes (from bluex ) wich has 0.8mm more lenght space and guides to hold it better in place. Now it…

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
151
Likes
72
Rating
5
P
PrintablesSJM

Insert Boxen, stackable Sorting Boxes, Ordering Boxes for TK400 & TK600

This are stackables Insert Boxes for the Eurobehälter /Eurobox TK400 and TK600 /75 /145 etc. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none Comments printed…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
24
Rating
0
P
PrintablesMoNkEy

MK4 Y-Axis belt tensioner MK3/S/S+

Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
146
Likes
35
Rating
4.8
P
PrintablesJhannes

MK4 Display Adapter for the Ikea LACK Enclosure

You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
138
Likes
39
Rating
5
P
PrintablesBrainWorks

Pi4 Case for Prusa MK4 Base Frame Mount

Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
136
Likes
31
Rating
0
P

motor rotation indicator Prusa MK4/MK3

Weeeeeee. X axis motor indicator. :D

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
18
Rating
5
P
PrintablesFilip Vašata

Ultimate Prusa Casing for MK4

CZ Stále jsem chtěl nějak vzhledově vylepšit tiskárnu MK4, tak aby vypadala trochu nebezpečněji. Vyšlo několik verzí Ultimate Prusa Casing pro MK4, které se mi tolik nezamlouvali. Hodně se mi líbila verze pro MK3 z které jsem také vyšel:…

Print approx. €26.00–€31.78 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
49
Rating
5
P
PrintablesFC2M3D

Universal Camera Mount for Prusa MK3/MK4 (Remix)

You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
16
Rating
0
P
PrintablesHellcatless

Prusa Mk4 sidebox/toolbox

Right and left versions of empty boxes and left side there is also toolbox version. Inside the toolbox there is slot of original prusa mk4 tools.

Print approx. €5.43–€6.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
19
Rating
5
P
Printablesplabs.cz

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
123
Likes
22
Rating
5
P
PrintablesVít Bezouška

Mk4 LCD cover with pawn-like grip

Liked the original creation, but the grip felt weird. Made my own inspired version completely from scratch. Remember to print it out of a dark opaque material or cover the back with some black electrical tape. Some light could pass…

Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
18
Rating
4.8
P
Printableskjrps

Accessory cover for waste bin "Prusa Bin MK4" (Ergänzung für diese Abfallbox)

It fits on this bin: https://www.printables.com/de/model/526044-prusa-mk4-bin

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
20
Rating
5
P
PrintablesKageve

Mk4 Nextruder Hotend Assembly Box (MMM option avalible)

A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles. It has a few small features on both short ends to allow it…

Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
26
Rating
4.67
P
PrintablesRadek

Prusa MK4 straight fan door

Changed the position of the hinge and added radiuses to the magnet area, so the magnet doesnt move. I dont know why it is different on some printers but even in assembly manual they are not in 90 degrees on few photos. I ve tried putting…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
118
Likes
18
Rating
5
P
PrintablesHaggard

Prusa MK4 Camera Mount for Logitech C930 / Logitech C920

As an Remix from @ebeeche_158366 camera mount, I don't want toremove the foot of my Logitech C930. So I remix the camera arm, that it can hold a camera with tripod hole. Supports are necessary for one side. Please check the original…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
113
Likes
14
Rating
4.5
P
PrintablesGraloth

MK4 Reverse Bowden Adapter - Coupler edition

The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
111
Likes
13
Rating
5
P
PrintablesEagleEi

Buffer box MMU3 for MK4 better Filamentsupport

This version helps all those who are looking for a special solution to optimize filament routing. This version allows the filament routing to the MMU to be perpendicular without a radius and reduces the bends. This version is also 100%…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
111
Likes
31
Rating
3.5
P
PrintablesAktalion

SK40 Label Clamp

Do you have loose SK40 toolholders lying around or do you change tools often and don't know for sure which tools are clamped? This model might help. Just snap the labeled clip on the toolholder and you will not only know which tool is…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
5
Rating
0
P
PrintablesWindy

PRUSA MK4 Heatbed back cables cover - right side outlet MK4

I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…

Print approx. €0.72–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
20
Rating
5
P
PrintablesOestle

MK4/MK4S backside cable clip

Cable clips that fit to the back of the Prusa MK4/MK4S without hindering movement of the heatbed. Can hold 4 cables of ~7mm diameter (or more if they're thinner).

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
38
Rating
5
P
PrintablesBlinkSTOP

LCD to frame gap filler for MK3.5, MK3.9, MK4 & MK4S* (4 separate models, *see note below)

If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
17
Rating
4.67
P
PrintablesOkojo

Gridfinity Mk4 Nozzle Tools Holder

The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
24
Rating
5
P
Printablesfelix42sol

(Switched) Filament guide for Prusa MK4 #build123d

Warning IMPORTANT: Using the switched fillament guide with very high models crashes the extruder! Please be aware of that! I am planning to update the model as soon as possible to remove this issue. Motivation After my original and…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
12
Rating
5
P
PrintablesDaParts

First Layer Temperature Calibration - MK4

A lot of people seemed to be having problems with wavy lines across the first layer of their prints due to too hot of temperatures, myself included. So I made this G-Code file in order to calibrate what temp you should use. DO NOT JUST…

Print approx. €0.67–€0.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
96
Likes
43
Rating
5

Universal camera platform and eufy indoor cam adapter for Prusa mk4

Webcam holder for the back of the MK4. Instead of the eufy adapter, other holders can also be subsequently attached to the basic holder with double-sided adhesive tape or superglue. Print settings: PLA or PETG organic supports 0.2 layer…

Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
13
Rating
5
P
PrintablesEnijat

High-visibility and performance Prusa MK4 fan duct

I created this model because I wanted a fan duct that could accomplish all the following things: Good performing cooling from all directions. Being able to easily observe the nozzle during printing from the front and from the left side,…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
27
Rating
5
P
PrintablesMoNkEy

MK4 MK3/S/S+ Suspended Storage Box

If necessary, adjust the supports to allow them to fit together Distance from first support to engine approximately 12mm Distance of second support from first approximately 91mm Used printing profile 0.20mm STRUCTURAL (Input Shaper) I…

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
13
Rating
5
P
PrintablesMichaelQ

MK4/MK4S X-Motor Cable Protection - Cable Fastening to the Rear

When I was assembling my new MK4S, I wanted to fit the X-axis stepper motor guard from my MK3S+. I was a little surprised when I realized that this guard doesn't really fit. After measuring carefully, I realized that the rear metal plate…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
39
Rating
5
P
PrintablesjonnieZG

VFA Test Prusa MK4S

I made this remix with the settings for Prusa MK4S, to have a reference print when comparing against CORE One.

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
4
Rating
5
P
PrintablesStrayCat

Luggage wall bracket for BMW F800 R, S, ST, GT and S1000XR(K49)

Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
7
Rating
0
P
PrintablesT_K

Prusa MK4, Nextruder nozzle box

I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
10
Rating
5
P
Printablespipo

Prusa MK4 Z-axis mounts for IKEA SKYDRAG/SILVERGLANS light bar

Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…

Print approx. €3.62–€4.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
71
Likes
24
Rating
5
P
PrintablesBotWithWrench

MK4 Nozzle Replacement Tool - No Tab

The first two times I tried to use this tool it became stuck onto my tool head so stiffly that I had to rip apart the model to get it off. This could be because I was using a fairly stiff/tough PLA, but regardless of the reason it was…

Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
8
Rating
0
P
PrintablesFokieH

Prusa MK4 & MK4S Zwangsbelueftung / Forced ventilation

Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
37
Rating
5
P
PrintablesVisualReversal

Hex Twist Lock for Prusa MK3 & MK4 Extrusions

While making my MK4 Mesh side box model I needed a way to attach the box to the printer without having to take off the face plate. So, I basically recreated the rubber foot from the bottom of the printer in PLA and attached a spacer and…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
24
Rating
5
P
PrintablesCzech creator

The MK4 Storage Upgrades 2.0

The first model is a box that can be used to hold things such as a rasper, or it can also be used as a trash can. The second one can only hold the plier that comes with the Original Průša MK4 3D printer. Version 2.0 In this version, three…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
14
Rating
0
P
Printablesunit

MMU3 Center Spacers for MK4/S frame

Remix of MMU3 Spacer for MK4/S frame. End of spacers was mofified to be wider to be able to fit on MK4/S frame. Update: added locks to hold spacers in place Thanks for the original design...

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
11
Rating
5
P
Printablestachijuan

Gargoyle for the Prusa Mk4

Who doesn't need Gargoyle's on their printer? Love the look of this on the Mk3 but could not find an alternative for the Mk4. This will require that you print in PETG per Prusa's part recommendations. I did a color/filament change at the…

Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
15
Rating
5
P
Printablespipo

Light control junction box for Prusa MK4 for mounting on the frame

Box for housing the light switch and routing cables to lights. Mounts via double-sided tape on top of the MK4 power supply with extra brace around the frame for rigidity. The cover plate is attached by M3 screws which cut treads into the…

Print approx. €2.32–€2.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
16
Rating
5
P
PrintablesLarryD

3DO Nozzle Cam for MK4 Remix

My goal with the remix was to integrate the mod into the printer so it could easily be turned on to use and have it be unobtrusive when not in use. The camera kit comes with 2 LEDs which are 3-wire digitally controlled. I deleted these…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
23
Rating
5
P
PrintablesRo3Deee

No ring Transparent front case for Nextruder (Prusa XL, Core One, MK4)

Preparing the print Open the 3mf file as PrusaSlicer project (settings for Prusa XL will be loaded). If you a have a different machine than Prusa XL , to get more transparency you need to apply to your machine the settings I used from…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
13
Rating
5
P
PrintablesPetr Bojar

Wifi module cover R1 + USB for MK4S

The Prusa printers lack a USB port for connecting a camera or other accessories. I use this voltage converter from 24V to 5V with an integrated USB port.. Buck step down měnič DC - 6-24V, 12V/24V na 5V 3A USB The voltage converter is…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
59
Likes
7
Rating
5
P
Printablesmagarbl4

Prusa MK3* MK4* PEI Sheet Holder

Die Prusa MK3* MK4* PIE-Halterung ermöglicht die platzsparende Aufbewahrung der Platten unter einem Regal.

Print approx. €21.86–€26.71 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
7
Rating
5
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
15
Rating
5
P
PrintablesPavel Čech

MK4 and MK4S coverboard Cover in one part

I made a remix of the model where there is more clearance at the side panel and a screw hole is placed. The increased clearance helped with cable placement from the side. Printed from PETG. My copy is missing the description on the top. I…

Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
7
Rating
0
P
PrintablesUca

Sensirion SHT4x & Round Thermometer / Hygrometer holder for Prusa MK4

In order to know the accuracy of my own thermometer/hygrometer, I built the holder 3Ds directly😊 The Sensirion SHT4x holder refers from https://github.com/Sensirion/smartgadget-sht4x-housing/tree/main/Housing . And the diameters of the…

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
4
Rating
0
P
PrintablesNdyah

flat xlcd cover + mk4s and mmu3 text

just an edit for the flat lcd cover

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
18
Rating
0
P
PrintablesJean romain

Boite de rangement pour les buses de la MK4

Boite de rangement pour les buses de la MK4

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
17
Rating
0
P
PrintablesS3BR4

PRUSA MK4 - LCD Toolholder

As I saw the other mods to fill the gap between the LCD screen and the frame of the MK4 I thought this might be a great place to store my tweezers as they are my most used tool. The space is exactly the right size and just needed some…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
9
Rating
5
P
Printablesbandibh

MK4S Spool Guide

To hold a spool further towards the outside of the enclosure and away from the print head of the MK4S, put this around the spool holder and use a spare M3NS and M3x8 or 12 bolt to clamp it down. Once clamped down it holds the spools off…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
8
Rating
5
P
PrintablesAvitus

Prusa MK4/3S Clip-on Phone Holder for Landscape mode

A remix of Leo's phone holder, with height optimized for Landscape mode. Tested with iPhone 13 mini ultrawide camera (see second photo). Prints in 13 minutes on i3 MK3.9S.

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
3
Rating
4.33
P
PrintablesMichael

Ford Focus MK4 | Quadlock adapter for Aliexpress phone mount (2 versions)

Ford Focus MK4 Quadlock adhesive mount adapter for Aliexpress phone mount Quadlock dashboard/console mount doesnt stick on the dashboard material and couldnt find a good location. So i combined it with this dashmount from Aliexpress…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
6
Rating
0
P
PrintablesFokieH

MK4 & MK4S Netzteil / PSU Replacement

Hier findet Ihr Modelle eines Halters der das Netzteil ersetzt und entsprechend für die Stabilität am Drucker sorgt und gleichzeitig die elektrische Verkabelung beinhaltet. Auch Dabei ein Halter für das Netzteil selbst, um es Außerhalb…

Print approx. €4.89–€5.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
14
Rating
5
P
PrintablesM3DDruck

Seitlicher Halter für Hygrometer/Thermometer Prusa MK4 / MK3.5 und MK3s+ mit neuem Rahmen

Hier ist ein Remix vom Seitlichen Hygrometer/Thermometer Halter. Die Halterung ist für dieses Hygrometer von Amazon: EEEKit 3 Pack LCD Digital Hygrometer Thermometer, Mini Digital Temperaturmesser Feuchtigkeitsmesser Mini Hygrometer für…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
6
Rating
5
P
PrintablesMichael

Ford Focus MK4 | front footwell brackets for Aliexpress ambient light

Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
4
Rating
0
P
PrintablesMike D

MK4 bin for use with squash ball Vibration Dampener v1

First Version of the bin for my MK4. Fits on the right side of the printer in between the squash ball dampenerl.

Print approx. €3.23–€3.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
4
Rating
5
P
PrintablesOčko

MK3.5/MK3.9/MK4/_el-box-cover-R2_remix

Original setting PrusaSlicer 0.2mm Speed, Prusament Petg.

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
4
Rating
0
P
PrintablesJason

Large City Frame resized for the MK4 print bed

The city models are great, however the frame was slightly too wide for the MK4. This has been trimmed slightly. The inner area is identical, so it will hold the model without changes. You could also resize the map model and this model by…

Print approx. €3.53–€4.31 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
PrintablesKai

Prusa MK4 Front Box

Kleine Box zum Anstecken für die Frontplatte des Prusa i3MK4. Speziell zur Verwendung mit meinem externen Displayhalter. Prusa MK4 Display Halter / Prusa MK4 Display Holder von Kai | Kostenloses STL-Modell herunterladen | Printables.com…

Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
7
Rating
5
P
PrintablesMichael

Ford Focus MK4 | handle light diffuser V2 (REMIX)

Diffuser fitting a Ford Focus MK4 to install Aliexpress ambient lights.

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
5
Rating
0