Search results: mounting

Sort order

6,560 models

P
PrintablesChrisfu

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Downloads
3,468
Likes
1,008
Rating
4.91
P
PrintablesDaHouzKat

Multifunction Arm mounting system Spinning Adapter

360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…

Downloads
3,137
Likes
1,822
Rating
4.63
P
PrintablesMoritz

Nema 17 mounting bracket/holder

General information Simple mounting bracket for Nema 17 stepper motor with holes for 4mm screw. Print instructions Layer Hight: 0.2mm Infill: 20% Supports: no Nozzel: 0.4 is recommended

Downloads
2,243
Likes
66
Rating
4.8
P
PrintablesTijnoz

Unifi AP AC-LR mounting bracket

Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…

Downloads
1,190
Likes
66
Rating
5
P
PrintablesDaHouzKat

Multifunction Arm mounting system Tablet Holder Hinge

180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…

Downloads
1,006
Likes
437
Rating
4.67
P
Printables/dev/tea

Raspberry Pi Zero (W/2) Slim Case with Mounting Tabs

A slim case for the Raspberry Pi Zero (w) and the Pi Zero 2 with mounting tabs and a friction fit lid. There are a few alternate lid designs if you want room for a header and/or heatsink. The regular case and lid work fine on the Zero 2,…

Downloads
930
Likes
143
Rating
4.9
P
PrintablesSeppo

Smartphone Stand tripod Stativ Modular Mounting System

This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…

Downloads
815
Likes
105
Rating
4.8
P
PrintablesZach

Stone Mounting Structures - D&D Scatter Terrain

A set of detailed stone pieces designed to support my Water Wheel model , and to be an easy addition to any tabletop terrain project! This is an easy set of pieces to print and put together, and it has enough detail for a simple…

Downloads
673
Likes
235
Rating
0
P
PrintablesMartinRowan

ZimaBoard 1U Rack Mount with optional SSD Mounting

Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…

Downloads
639
Likes
59
Rating
4.5
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Downloads
614
Likes
48
Rating
5
P
PrintablesFormFitPrint

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

Downloads
521
Likes
165
Rating
5
P
PrintablesDaHouzKat

Multifunction Arm mounting system Cable Clip

Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables

Downloads
496
Likes
207
Rating
5
P
PrintablesPatrik

Multiboard connector for a regular screw mounting point

Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…

Downloads
322
Likes
61
Rating
5
P
Printablespatrickzell

Wall mounting bracket for Xiaomi Mijia Bluetooth Thermometer Hygrometer (Wandhalterung)

Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…

Downloads
288
Likes
32
Rating
5
P
Printablesharaldan

Vesa side mount for the Multifunction Arm mounting system

Variation on the Vesa mount for the Multifunction Arm. This part allows mounting a screen to the side, rather than the end of the arm, which is especially useful for multi-monitor setup. Use together with the “Base-small-with-holow-M3”…

Downloads
273
Likes
73
Rating
5
P
PrintablesINSANEWAVE

Honeycomb Wall Mounting Without Screws REINFORCED

I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…

Downloads
222
Likes
54
Rating
5
P

DIN rail mounting for server rack

I needed an easy way to hold a DIN rail to the side of my NavePoint 15U wall mount open frame server rack. These parts allow you to mount the DIN rail on the side of the rack with a slotted endcap to help adjust for a variable length rail.

Downloads
216
Likes
65
Rating
0
P
PrintablesChrisfu

Mounting aids for orbital sander discs and delta sander sheets

I grew tired of constantly repositioning my 125mm sanding discs on my orbital sander to achieve proper centering. Uncentered discs result in imbalance, leading to increased tool vibration, making it challenging to achieve a smooth and…

Downloads
185
Likes
46
Rating
0
P
PrintablesClamikra

External MMU Mounting System (EMMS) for Original Prusa Enclosure (OPE) and MMU (Ultimulti)

Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…

Downloads
172
Likes
136
Rating
5
P
PrintablesEmir Durmić

HP PRODESK G4 Mini mounting bracket

I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution

Downloads
155
Likes
14
Rating
0
P
Printablesoltas

WOO 3.0/4.0 mounting plate

I needed a second mounting plate for my bigger board. So i print one on my 3d printer. You can easy make a second plate with the parts delivered with your woo package. If you need more you have to order 3M VHB double-faced adhesive tape…

Downloads
140
Likes
6
Rating
5
P
Printablesbotsmaker

Protective box for Arduino LCD with mounting tabs

I wanted to mount the LCD case to a proto board setup and decided mounting tabs with holes was needed. I placed the tabs to the bottom section using Tinkercad. They will now take a pair of #6 screws, placed 3.75 inches apart. Only the…

Downloads
133
Likes
15
Rating
5
P
PrintablesFH

HIKMICRO Mini2Plus V2 Mounting Adapter

This is a camera cage and tripod adapter for the HIKMICRO Mini2Plus V2 thermal imaging camera module. The combination of a thoughtful design and a specific material choice results in a ¼-inch mounting solution that is both easy to print…

Downloads
127
Likes
6
Rating
0
P
PrintablesIBNobody

Raspberry Pi 4B + Adafruit 3.5 TFT Case + Tabletop Mounting Brackets

I remixed the original case and thickened it enough to allow for the fan to be mounted inside. I also added a ribbon cable tab below the Pi's USB connections. With the added thickness, I was able to pull the ribbon cable out vertically…

Downloads
121
Likes
20
Rating
5
P
PrintablesPascalou

CIOKS DC7 Mounting Bracket for Wood Pedalboard

Hi! This is my wood pedalboard mounting bracket for a CIOKS DC7 if you plan to install it under like I did. Hope you enjoy!

Downloads
118
Likes
14
Rating
0
P
PrintablesZach

Electrical box for double and triple Loxone Mounting Bracket

Double and triple Loxone Mounting Brackets (https://shop.loxone.com/enen/mounting-bracket-double-silver.html, https://shop.loxone.com/enen/triple-mounting-bracket-silver.html) have non-standard box spacing of 98 mm. Installing three…

Downloads
115
Likes
22
Rating
0
P
PrintablesJC

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount (Dodge Durango Pursuit)

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…

Downloads
113
Likes
12
Rating
5
P
PrintablesTipTop

EASTON EA70 Mounting Plate (e.g. for drone remote controls)

This mounting plate was modeled to be the base for a drone remote control for my bike. I didn't want to mount the remote control on the bike handlebars because I don't have enough space and it just didn't feel right.... ;-) So I decided…

Downloads
108
Likes
12
Rating
0
P
PrintablesKarl

Reolink Mounting Bracket

The default Reolink mount is designed for mounting to a wall with masonry screws or wall anchors. That's fine, but some applications need a clamping surface instead. This is particularly the case if you want to mount it onto a gutter, on…

Downloads
105
Likes
12
Rating
5
P
Printables3Dprintfun

US Amazon Prusacaster Four Mounting Holes

This is the kit you will need to purchase for printing this: Fistrock DIY Electric Guitar Kit Beginner Kit It shows 3 holes for the bridge on the Amazon page, but it is four. Story The Prusacaster was always one of my dream 3D printing…

Downloads
96
Likes
16
Rating
0
P
Printablesfluetke

Mounting bracket for acoustic foam (25mm & 50mm) v2

This improved version of the acoustic foam mounting bracket has been improved by adding in a structural beam to keep the mounting clamp from sagging under the heavier load of wider and denser acoustic foams. In combination with 3M Command…

Downloads
80
Likes
16
Rating
5
P
PrintablesSteven

Sheet Holder with Eject Button Mounting Brackets

I made this to mount the sheet holder print to the underside of my lack enclosure. It takes M3 nut and screw to hold it.

Downloads
70
Likes
13
Rating
5
P
Printablespipo

Light control junction box for Prusa MK4 for mounting on the frame

Box for housing the light switch and routing cables to lights. Mounts via double-sided tape on top of the MK4 power supply with extra brace around the frame for rigidity. The cover plate is attached by M3 screws which cut treads into the…

Downloads
64
Likes
16
Rating
5
P
Printablesgedeyenite

Meross MS600 Motion and Occupancy Sensor Mounting Bracket

Meross just released this in the last few months. The only mount I could find was a 45° and 30° corner mount. This is my first model created in Fusion 360. Prusa gave me a lesson on Fusion 360 as part of my Prusa XL purchase, so I made…

Downloads
61
Likes
5
Rating
0
P
PrintablesVookimedlo

Element System: Kistenberg storage bin (KTR16) mounting gizmo

This model allows a mounting of the Kistenberg's TRUCK STORAGE BIN 16 (KTR16) on perforated wall steel plates produced by the Element System. The KTR16 box:…

Downloads
59
Likes
14
Rating
0
P
Printablesmatbcvo

MikroTik RB5009 mounting bracket

MikroTik RB5009 mounting bracket, can be installed either way (0 or 180 degrees) 4 x M4 nut and screw (length 40 mm) Recommended to sand with P120 sandpaper and then glue with epoxy glue

Downloads
53
Likes
1
Rating
0
P
Printablessternli27

Quad Lock compatible Mounting Bracket Base for Bicycle Bike

This design is particularly stable because it is based on two brackets. I used the original M5 thread insert. I removed it with some heat from the original bracket and reused it in this design. I inserted the thread insert during printing…

Downloads
50
Likes
17
Rating
0
P
PrintablesKlaus
Downloads
49
Likes
10
Rating
0
P
PrintablesMajsterkowo

Tool for mounting spacers for NyloNove footplates

Tool for mounting spacers for NyloNove adjustable footplates . Required layer height: 0,15 mm Made by hulaj.market

Downloads
46
Likes
9
Rating
5
P
PrintablesBobbyb

AnkerMake M5 Mounting for 3DChameleon

TLDR: 3D Chameleon is a (now) open source 4 filament AMS that can be used with many different printer models. Getting it to work well on an AnkerMake M5 using Orca Slicer (and in a compact space) took quite a bit of tinkering. Bottom…

Downloads
45
Likes
17
Rating
0
P
Printablessodarntom

Govee Neon Rope Light Mounting Clip

The lights used to come with clips like these, but now only use adhesive strips, which aren't ideal. I like printing them wiht the screw hold facing down and then just using a brim for support. PLA can be a bit brittle, so a little more…

Downloads
45
Likes
2
Rating
0
P
PrintablesKrullshards

C525 to C260 Mounting Hinge

I saw a bunch of mounts for a C270 type of camera for my Prusa i3 MK3S but I had bought a C525. I didn't realize it at the time but the C270 has a screw that allows you to remove the folding mount so you can use the hinge to mount it to…

Downloads
45
Likes
9
Rating
5
P
PrintablesAlvomane

Samla 22L Compact Drybox Mounting Frame | Montage Rahmen für Frantisek23s Trockenbox.

Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…

Downloads
45
Likes
12
Rating
0
P
PrintablesUnknownkwita

FCS Label Mounting Solution

The Filament Color System allows you to produce color reference chips for to label your materials. Label Features This bracket lets you use FCS chips to quickly label fillament in dry bins, on the wall or where ever you store them. There…

Downloads
43
Likes
16
Rating
5
P
Printablesplex41

Pen holder for wall mounting with power strips.

Pen holder for wall mounting with power strips. Extra space to detach. For 4 pens. We use it to label our annual calendar.Size for original power strips. For loosening from below with needle-nosed pliers, for example.

Downloads
42
Likes
5
Rating
0
P

Mounting Box for FM Transmitter Chip

Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/ NOTE: YOU WILL NEED TO REMOVE THE MIC FROM THE BOARD FOR THIS TO FIT Resolution: <= .28 Infill: >=20% Filament material: PLA Print with brim…

Downloads
42
Likes
6
Rating
0
P
Printablessascha

Vesa 200 to 100 mounting bracket

Simply single-side Vesa 200 to 100 mounting bracket I made for a mounting solution for an Nvidia Shield .

Downloads
41
Likes
3
Rating
5
P
PrintablesMike

Groove LED Strip mounting IP65

re-created the original groove LED Strip mounts because i needed more. It's printed in PTEG and for mounting I used TX20 3,5x20mm screws.

Downloads
41
Likes
5
Rating
0
P
PrintablesDC

Mounting bracket - Internal active air filter.

This is a mounting bracket designed to be used with StanleyB 's Internal active air filter . Once mounted, the air filter slides into place for easy removal to change the filter or replace parts.

Downloads
40
Likes
6
Rating
4.6
P
PrintablesNick Carwile

Necklace holder for wallmounting

Necklace holder for 11 necklaces intended for wall mounting with adhesive mounting. Printed with MK4S on 0.2mm layers using PLA. I suggest adding a layer modifier for the layers that include the hooks to increase to 100% infill for…

Downloads
40
Likes
15
Rating
0
P
PrintablesUrri

Mounting plate for AnyTone Mobile Radio, AT-779

Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.

Downloads
39
Likes
6
Rating
0
P
PrintablesRoadsideRC

Furitek Slidetech ESC Mounting Plate

This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car. I created this simple mount that allows the ESC to sit off the bottom…

Downloads
37
Likes
4
Rating
0
P
Printablestom

Einbaurahmen für digitale Thermometer-Hygrometer/ Mounting frame for digital thermometer-hygrometer

Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…

Downloads
36
Likes
3
Rating
0
P
PrintablesOshi Kavadia

RepRack Cleat with mountings for key hole shelves

RepRack wall cleat with keys that slot into key hole mounts on my shelf frame instead of being screwed to the wall. Sliced laying down with supports for the new mounting points and a lot of extra perimeters and high infill. Printed on my…

Downloads
35
Likes
5
Rating
0
P
PrintablesStartrekfan2

Arenti camera mounting bracket

Mount the black cap (with locking tabs) to the base. I used (2) M3x8 cap screws with nuts. I printed with 3 perimeters in PLA. I use the camera to monitor my Prusa MK3.

Downloads
33
Likes
6
Rating
0
P
PrintablesPapaMike

Freewing Yak-130 70mm Receiver Mounting Plate

Mounting plate for the receiver in a Yak-130 from Freewing, possibly also suitable for the model from FMS. As a receiver I have used an Frsky Archer SR6. Mounting advice: To glue the mounting brackets correctly, screw the plate to the…

Downloads
33
Likes
2
Rating
0
P
PrintablesFatal Error

Battery holder mounting point Citroen c4 grand picasso 2015

Object/type/model: Citroen C4 grand picasso 2015y. Part: Mounting point of battery holder Description: So citroen greatly design battery holder mounting point as you can destroy it on first unscrewing. But we know how truly save…

Downloads
31
Likes
8
Rating
0
P
PrintablesOgre Ray

5th Gen Toyota MiniCubby Mounting Point

I remixed Walletclan3D's excellent storage cubby to reinforce it with ribs for weighted\loading, and thickened the front so I can install fasteners. I found the cubby too small for storing things, but I needed a spot for my GMRS radio…

Downloads
30
Likes
5
Rating
0
P
PrintablesSonny13

dsj-3079-he Camera Case with mounting plate

Mouunt can be attached with double side tape. Additional parts needed: 1x M3x25 screw 1x M3 nut

Downloads
30
Likes
2
Rating
0
P
PrintablesChevdor

Wall Mounting plate for RaspberryPi

This is a wall mounting plate for Raspberry Pis. I needed a version that would allow passive cooling, protect from dust and look cool. This model can be easily printed in PETG or PLA with 0.3mm layers. There is enough room to take the…

Downloads
29
Likes
7
Rating
0
P
PrintablesJPMakesStuff

Replacement mounting back for HomeSeer HS-DS100+ Z-Wave Door-Window Sensor

Replacement in case you break the tab off like I did Designed for: https://shop.homeseer.com/products/z-wave-door-window-sensor HomeSeer HS-DS100+ Z-Wave Door / Window Sensor

Downloads
29
Likes
1
Rating
0
P
Printablesecsv

Ethernet cable clip for mounting next to furniture

Cable clamps are usually supposed to be mounted on a sturdy wall with a simple nail or a small screw. But on some older buildings, the wall is often too porose and would need larger screws and a (chemical) dowel. To avoid this, also some…

Downloads
28
Likes
8
Rating
0
P
PrintablesJPMakesStuff

Fan mounting backplate for SL1S

I am venting my printer directly outside, so I did not want the charcoal filter impeding airflow. This plate holds the 60mm fan alone (you need to use your own screws) I then have another attachment that allows for a 2" flexible tube to…

Downloads
26
Likes
4
Rating
0
P
PrintablesEmir Durmić

Mounting box for DAHUA IPC-HUM4231S-L4 camera

Easy to print. I've printed with 0,2mm resolution for beauty but I think 0,3mm is also fine. Horizontal one is 2 part print. Camera in this case is:…

Downloads
26
Likes
2
Rating
0
P
Printablesbmccarthy321

Polaris RZR 800 Rear LED Light Mounting Bracket

This goes along with the top mount LED bracket I made and the roll cage mounting brackets… I wanted to put the rear lights on the roll cage so I made a bracket to do it. There's two designs… the first one has a 5/16" bolt through the…

Downloads
25
Likes
3
Rating
0
P
Printablestimray30

Peg with M3 nut mounting

I wanted to attach a filament bag to the side of my printer enclosure to tidy away all the waste filament. So I adapted the peg and created a way of attaching the peg to the side of the enclosure. You will also need: 1xM3 Nut 1x M3x8mm…

Downloads
24
Likes
5
Rating
5
P
Printables3DFW

Alpaka Gear Hub Mounting Bar

Remixed by 3DFW: This is a remix of ChickenMyBobbers’ clever Alpaka HUB mount replica. I made some small adjustments and uploaded it here on Printables to make it more accessible to others not using MakerWorld. Full credit to the original…

Downloads
23
Likes
6
Rating
0
P
PrintablesOldKingHamlet

LRS-100 Case (Includes mounting point for Hf105f-4 24VDC relay)

Now, I'm lazy. And I don't like wasting power from devices being on when they don't need to. I also wanted to be able to power the lighting for my Prusa enclosure AND have capacity to upgrade to more powerful ventilation fans without…

Downloads
23
Likes
6
Rating
0
P
PrintablesCAR

Slim Soundbar Monitor Mounting Bracket

Are you looking to mount a Dell Slim Soundbar SB521A to Dell 24in P2419H Monitor ? Well, Dell doesn't have one. Sure, duct tape, rubber bands, and string could work… but do you really want something that trashy in a world full of 3D…

Downloads
21
Likes
1
Rating
0
P
PrintablesFrapperoni

Keyhold mounting holder for IKEA Galant

I designed these mounts to fit the Keyhole mounting system that is usually found behind multiplugs or small systems that can be installed on the wall. This particular design is meant to be used with IKEA's galant desks; the mount fits in…

Downloads
20
Likes
5
Rating
0
P
PrintablesDang Le

Ole's mounting clip for his Exposure Blaze MK3 light

Exposure Blaze MK3 is apparently a really expensive light that comes with a not very durable clip for mounting on the seat post. I made this for a buddy of mine who's really thrilled about my design's performance. There are stls for 27.2…

Downloads
18
Likes
2
Rating
0
P
PrintablesVivero

Mounting bracket HP AC adapter PA-1231-66HJ

The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed

Downloads
17
Likes
3
Rating
0
P
PrintablesAinon3Dtisk

Shelf 300x80x15 with brackets for mounting

Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Shelf 300x80x15 with mounting brackets. It is an absolutely great solution for displaying things. It does not need to be painted, it can also be outdoors.…

Downloads
16
Likes
2
Rating
0
P
PrintablesGPHerb

Ikea Antifoni Lampshade Mounting - Ikea-Antifoni Lampenschirmbefestigung

Meine Lampe ist mit einer 4W LED in einem G9 Sockel bestückt. My lamp is equipped with a 4W LED in a G9 base. Halogenleuchtmittel sind nicht geeignet! Halogen bulbs are not suitable!

Downloads
16
Likes
1
Rating
0
P
PrintablesAndo Roots

Showtec NET-2/3 Pocket DMX mounting bracket

Mounts the Showtec NET-2/3 Pocket DMX interface securely. Recommended print settings: PETG, 20% infill, no supports (larger overhangs on the mounting holes). To mount: either detach the included metal side panels, or mount the brackets on…

Downloads
15
Likes
5
Rating
0
P
PrintablesKonstisSFX

Mounting block for a lid to make an enclosure with the IKEA Metod Cabinet

This model can be printed with really low detailed settings and as fast as you can. Supports may only be needed at the transition. Place them with double-sided tape and fix them with two two centimetre long screw's per block. When they…

Downloads
13
Likes
2
Rating
0
P
PrintablesHamperer

Repair parts for broken projection unit mounting of a clock

The projection unit of a radio controlled alarm clock went off after it fell to the floor (frequently I assume). The projection unit can be swiveled around about 90 °, i.e. the repaired one should have kind of a stop. The model consists…

Downloads
13
Likes
0
Rating
0
P
Printablestom

Montageplatte eines Schalters für LED-Streifen für das „PrintClosure-Project”/ Mounting plate for a switch for LED strips for the “PrintClosure Project”

Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…

Downloads
12
Likes
0
Rating
0
P
PrintablesOld Machinist

Curt Trailer Brake Light Converter Mounting Plate

This mounting plate is to aid in mounting a Curt trailer brake light wiring converter box such as the Curt #56227 for the Nissan Leaf. It's sized to fit a 2.25" wide unit and has a 3.1" tall recess to fit the raised area of the converter…

Downloads
11
Likes
1
Rating
0
P
Printablestom

Halterung für die Montage des Netzteils außerhalb des "PrintClosure Project"/ Bracket for mounting the power supply outside the “PrintClosure Project”

Diese Halterung wurde für das schwarze Netzteil des Prusa MK3 entwickelt. Damit kann es außerhalb des Druckergehäuses befestigt werden. Wie die neue Kabelführung aussehen sollte, lässt sich gut aus der mehrsprachigen Anleitung von Prusa…

Downloads
9
Likes
1
Rating
0
P
PrintablesNoroPal

Garmin Varia mounting bracket for Kickbike scooters

Garmin Varia mounting bracket for Kickbike disc brake scooter frames. This is a highly modified remix of Tim Angus' files for Garmin interface. Changed main interface body to adapt to Kickbike rear fork, modified inner tolerancies to snug…

Downloads
8
Likes
1
Rating
0
P
Printablestom

Einbaurahmen für digitale Thermometer-Hygrometer für "PrintClosure Project"/ Mounting frame for digital thermometer-hygrometer for “PrintClosure Project”

Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…

Downloads
8
Likes
0
Rating
0
P
PrintablesKarolis

SYNCROS accessories mounting bracket for PRO saddles

Bracket to use Syncros accessories with PRO saddles. Every Syncros accessory mounts perfectly and holds strong. Originally it was designed for PRO Stealth saddle, but should fit every other PRO saddle. Printing settings: Filament: PETG,…

Downloads
6
Likes
2
Rating
0
P
PrintablesQtronik

Nicore New i2 Mounting Bracket (2014 Version)

Hook your Nitecore Charger on to wall or bench out of the way and always accessible. This version is for Nitecore charger i2 version 2014

Downloads
3
Likes
0
Rating
0
P
Printablesda_owa

Netgear GS308 Switch Mount for Hager volta Mounting Plate

Bracket to mount a Netgear GS308E (v4, metal housing 158 × 101 × 29 mm) in a Hager volta multimedia enclosure. Ports face up, the switch stays open on all sides for cooling. Same design as my GS305v3 mount, scaled for the 8-port housing.…

Downloads
1
Likes
1
Rating
0
P
PrintablesRostaP

Multifunction Arm mounting system

Arm mounting system Added source file of basic arm - parametric (you can see the process of drawing teeth) (f3d) Added source file for bolts and nut (f3d, stl) It is a universal set of holders and arms. You can use this system as a…

Downloads
26,003
Likes
12,833
Rating
4.87
P
PrintablesDavid D

openGrid - Wall/Desk mounting framework and ecosystem

This is openGrid, a general use wall and desk mounting framework/ecosystem. openGrid uses an opinionated design, focusing on ease of use and a clear structure for all the base parts. Still it is mainly meant to be extended by everybody…

Downloads
16,358
Likes
1,263
Rating
4.94
P
Printables6d6178

Skadis T-Nuts Mounting System for Ikea Skadis Pegboards

These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…

Downloads
16,141
Likes
3,542
Rating
4.93
P
PrintablesAleMaker 3D

Ender 3 V3 KE side spool mounting

Thanks to this mod, you'll be able to place the filament spool on the side of your Ender 3 V3 KE and avoid the constant excessive vibrations that can occur when having 1 KG of filament located on the top of the Z-axis. If you're looking…

Downloads
6,455
Likes
782
Rating
4.84
P
PrintablesORM

Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws.

Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…

Downloads
6,270
Likes
754
Rating
4.84
P
PrintablesKŌRA Studio

Wall Hook - Invisible Mounting

Modern Wall Hook with invisible mounting using a 3-4mm screw. Tested in PLA, PETG and Nylon. Three "top" variants are included: rounded, chamfered and sharp. Recommended settings: increase walls to 3-4, infill 35%+ Updated (2026/03/04):…

Downloads
5,114
Likes
2,724
Rating
4.89
P
PrintablesGelap

Govee Permanent Outdoor Lights Pro Mounting Brackets & Accessories

This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…

Downloads
4,958
Likes
443
Rating
5
P
PrintablesAleMaker 3D

Ender 3 V3 SE and Ender 3 V3 KE side spool mounting

Thanks to this mod for your Ender 3 V3 SE or Ender 3 V3 KE, you can place the filament on the side of your printer, either with @Tchaarm_1553187's mod or even with a dryer or portable spool holder. If you're looking for a mod that…

Downloads
4,456
Likes
579
Rating
4.95
P
Printables6d6178

Modular Mounting System Arms (Customizable)

These are customizable arms and knobs for the Modular Mounting System, similar to GoPro's Three-Way Pivot Mounting System . The design is entirely based on the Modular Mounting System Arm V4 ( thing:3689842 ) by jtronics but it uses the…

Downloads
4,092
Likes
905
Rating
5
P
PrintablesApex23

Ikea Skadis top mounting shelf

Looking for additional storage space and ways to extend the use of the Ikea Skadis organizer? This shelf mounts on top of the Ikea Skadis board and adds 190x 80mm of storage space without loosing the use of the upper holes. 4 shelfs will…

Downloads
2,520
Likes
651
Rating
5
P
PrintablesUWcharlie1983

Bracket for Wall Mountings

One minute introductory video for my Bracket for Wall Mountings: All four sides are tapered so it is easy to slip things on and off. There are holes for two screws/nails, but only using the top one will work unless hanging something that…

Downloads
2,512
Likes
265
Rating
5
P
PrintablesORM

Battery holder for AA+AAA, Skadis mounting

This space-saving battery dispenser holds both AA and AAA batteries, 10 of each size. If you would like to have a version that is able to hold a little bit more batteries, you can find it here . There are holes in the sides of the…

Downloads
2,310
Likes
499
Rating
4.88
P
PrintablesFH

FÄSTA - Parametric Mounting Bracket

Download the Fusion 360 file and enter your custom dimensions (Modify, Change Parameters in the Design Workspace). I just recently got myself one of these neat electronically height-adjustable desks. With this purchase came the necessity…

Downloads
2,190
Likes
796
Rating
4.87
P
Printablessquirrelf3d

Ender 3/pro/3v2/CR10 (v1) X-axis original gantry/mounting plate

X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…

Downloads
1,869
Likes
144
Rating
0
P
PrintablesEvilProphet

ESRack - Mounting Brackets

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Downloads
1,798
Likes
151
Rating
4.64