Search results: neti

Sort order

11,416 models

P
PrintablesPreischl 3D

D20 Dice Box magnetic

D20 Dice Box – Magnetic Hey maker! 👋 A practical and stylish D20 dice box with a secure magnetic lid. Features: Designed for 5×5 mm round magnets for a snug closure. Works with flatter magnets using a printed spacer. Secure transport and…

Downloads
2,636
Likes
1,323
Rating
4.91
P
Printablesstefanlitter

Gridfinity Base - Light Magnetic Connectable Parametric

Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…

Downloads
2,072
Likes
310
Rating
4.92
P
PrintablesjonnieZG

Ultimate Magnetic Bed Scraper Spatula with Printable Blades

This is the final version of a bed scraper that evolved from a much simpler model I designed years ago. I created it by combining features from several other models I found online, but none of them included everything I needed. It has…

Downloads
1,746
Likes
454
Rating
4.97
P
PrintablesShaun577

Fidlock Twist Magnetic Bike Base

Replica of the genuine Fidlock magnetic base. Works just as well as the original. -Model has two internal cavities to drop in magnets during print then print over the top. Magnet size is 12x3mm. Careful when dropping in the magnets as the…

Downloads
1,319
Likes
154
Rating
4.67
P
PrintablesBeaver

Travel Chess Pieces - magnetized

A set of chessmen with internal voids for adding magnets. Add a print pause in your slicer, and add the magnets. These are scaled down from FIDE sized, the three scales are: 50% Scale, using 6x3mm magnets 33% Scale, using 4x2mm magnets…

Downloads
1,188
Likes
80
Rating
5
P
PrintablesRichard

Magnetic clip (curtains connector)

This magnetic clip is designed in Fusion360. The model in fotos is printed on my Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used support cubic infill but check my G-code for more info. No supports needed. I used magnet of…

Downloads
1,141
Likes
1,050
Rating
5
P
PrintablesPhilippHee

Magnetic Whiteboard Pen Holder

Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…

Downloads
1,021
Likes
148
Rating
4.89
P
Printablesmichalgerhat

Magnetic PFTE coupler dock/terminator

I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…

Downloads
847
Likes
527
Rating
4.76
P
PrintablesPALM

Voron 2.4 Magnetic door hinges

This design allows a quick an easy door removal/installation for the Voron2.4. Removing the door can be helpful for maintenance work on the printer or for printing PLA. Once removed the doors can be stored on the side of the printer in…

Downloads
776
Likes
167
Rating
4.67
P
Printableskennyd1gital

Magnetic Hide-A-Key

A simple “Hide-A-Key” style key box with embedded magnets for hiding a key. The box has magnets for both attaching it to a hidden area (such as inside a metal cabinet or on the inside/underside of the frame of a trailer, etc.) and for…

Downloads
689
Likes
225
Rating
4.6
P
Printablesblide

Magnetic Socket Toolbox Organizer Half Inch 1\2"

Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Downloads
666
Likes
191
Rating
4.33
P
PrintablesBassettDesigns

Kinetic Planetary Gear Coaster

Inspired by a planetary style gear box, this large 105mm coaster features an industrial aesthetic focused on spur gears. This large design can accommodate any normal or oversized drinking glasses. The embedded spur gear pattern below…

Downloads
663
Likes
234
Rating
4.6
P
PrintablesAnodyne

Lucky Clover Magnetic Fidget Slider

Magnetic fidget slider with satisfying haptic feedback and click. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this lucky charm easy to pocket.…

Downloads
637
Likes
147
Rating
4.9
P
PrintablesAdam

Dog Scent Training Vessel - Magnetic

This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). The embedded magnet cutout is designed for a 12x1.6mm…

Downloads
621
Likes
95
Rating
5
P
Printablesblide

Magnetic Socket Toolbox Organizer Three Eighth Inch 3\8"

Toolbox socket organizer for 3\8 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Downloads
619
Likes
163
Rating
4.25
P
Printablesblide

Magnetic Socket Toolbox Organizer Quarter Inch 1\4"

Toolbox socket organizer for 1\4 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Downloads
591
Likes
186
Rating
4.33
P
Printablesneoyarus

Wowstick case with magnetic bit holders, parametric

Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…

Downloads
508
Likes
139
Rating
4.88
P
Printablesscubam@xx

Magnetic Hygrometer Thermometer mount for Enclosure or Filament DryBox

This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…

Downloads
502
Likes
117
Rating
4.92
P
Printablesxtiger

Parametric Magnetic Hinged Box

The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…

Downloads
411
Likes
43
Rating
5
P
Printablesishikawats

TARS Robot: Magnetic Joints

This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…

Downloads
395
Likes
136
Rating
0
P
PrintablesStephen J

Magnetic Dog Scent Training Capsule

I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…

Downloads
367
Likes
51
Rating
5
P
PrintablesBubbleology

Print in Place Magnetic Case for Nintendo Switch Game Cartridges and SD Cards

This is a print in place case with magnetic closing to store small items. The design uses an optionally printed inlay tray that holds Nintendo Switch game catridges and SD cards. Bill of Material (BOM) You will need some magnets for the…

Downloads
355
Likes
80
Rating
4.33
P
PrintablesJohn

PRUSA XL Magnetic Purge trays

Purge trays for connecting with magnets to your XL build plate. Use the stop to put in the magnets. No need for support. I used a brim.

Downloads
315
Likes
79
Rating
5
P
PrintablesMatt Boyer

Magnetic Calipers Holder / Ruler Holder

A small holder for your calipers that requires one 8x3mm magnet (glued in). The ruler holder requires two 8x3mm magnets (I also threw two 10x2mm magnets over the screw hole). I've included two ruler holders for two different widths. Both…

Downloads
314
Likes
68
Rating
4.9
P
Printablessquinn

Magnetic Separator Pick-Up Tool with Quick Release (Multiple Sizes)

A must-have tool to help you conveniently pickup the various metal objects in your work space, and then easily drop them where they belong via the quick release handle (can also be used as a “transfer magnet”) . All parts are designed to…

Downloads
310
Likes
236
Rating
5
P
PrintablesSeppel

Magnetic octopus holder for Scuba diving

This is a magnetic breakaway adapter mainly for the octopus/backup regulator on a normal (non-DIR) setup. I designed it to be as compact as possible while still accomodating a reasonably strong magnet. The mechanism should connect quite…

Downloads
287
Likes
63
Rating
0
P
PrintablesAsi

Xiaomi Airdots magnetic case

This is a replacement for Xiaomi AirDots case. I used some magnets I had to attach the top to the case. Print instructions Category: Replacement Parts Summary This is a replacement for Xiaomi AirDots case. I used some magnets I had to…

Downloads
275
Likes
9
Rating
0
P
PrintablesDom Cis

RAINBOW ROLLER-COASTER - KINETIC CIRCLE SCULPTURE

Light up your bleak autumn days with this kinetic sculpture. RAINBOW ROLLER-COASTER is an addiction making matter. You will not be able to tear your eyes off! Smooth movement is ensured by one motor and the whole assembly is very easy!…

Downloads
267
Likes
99
Rating
0
P
PrintablesMartin

Rounded rectangle Hygrometer magnetic holder for Bambu Lab P1S

Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…

Downloads
238
Likes
53
Rating
5
P
Printablesk.vanilla

Magnetic Acupuncture Fidget Toys

UPDATE: I found that the “nubby” sphere broke too easily when dropped, so I included a few updated STLs with thicker walls. I also discovered how much fun “fuzzy skin” is, so I included a new smooth texture sphere which can be sliced with…

Downloads
236
Likes
106
Rating
0
P
PrintablesChrisfu

Instax Mini magnetic fridge frames

===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…

Downloads
215
Likes
92
Rating
5
P
PrintablesTeTeHacko

Starlink Mini magnetic holder

Magnetic holder designed for 5×5×5 mm magnets, intended to be attached to the original Starlink mini pipe adapter. All parameters (such as magnet and pipe size) can be adjusted in the SCAD file. This model is not meant for use on a moving…

Downloads
208
Likes
24
Rating
5
P
Printables3Dprintfun

Magnetic 3D Benchy for Prusa Core One/+/L

I thought it would be a fun add on for the Prusa Core One to have a magnetic benchy, so I designed one! Has a small amount of filament between the bottom and the magnet for extra magnet strength. This fits 8x3mm magnets, but please post…

Downloads
206
Likes
43
Rating
0
P
PrintablesNoWayCall

D6 Parametric Magnetic Dice Box

Customizable D6 (16mm) Dice box with inserted magnets for magnetic closure. To change the number of dice: Fusion360 → Modify → modify parameters → "CubeNumber" (Note: If the box is way too long don't expect the magnets to hold up) To…

Downloads
192
Likes
26
Rating
5
P
Printablescaesar_1111

Spray Can Straw Holder / Mount - Universal - Magnetic e.g. for WD-40 cans !!<100mm filament!!

As I already have remixed a straw holder which only fits the 150ml and 250ml bottles of WD-40 i was wondering if there is something universal…. …now stumbling across the "Flash Contests Theme: Last Meter" I went for the universal and…

Downloads
188
Likes
71
Rating
4
P
PrintablesSquishinStix

Ascent 18 IR60 Hinged/Magnetic Body Mounts and Sliders

These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…

Downloads
187
Likes
15
Rating
5
P

magnetic 1/4" hex bit tool / holder for all round magnets (parametric file included)

Summary Ultra-compact and magnetic bit holder for every application situation. The bit can be inserted easily and won't fall out. Given .3mf file accepts widely used 6x2mm round magnets. Accepts any other sized round magnet (up to 18mm…

Downloads
169
Likes
47
Rating
0
P
PrintablesOuwekaas

Storage box for Begali Magnetic Traveler Light

This model is an easy long print, although be aware of warping! A default 0.2mm will do fine with a 0.4mm Nozzle and Perimeters set to 3. Recommend PETG, not PLA. Used filament in the picture; Extrudr PETG color “Dessert Storm” At first,…

Downloads
142
Likes
18
Rating
5
P
Printablesraybetter

2 Axis Camera Magnetic Mount for Freenove ESP32-WROVER

This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…

Downloads
142
Likes
20
Rating
5
P
PrintablesEdgar.A

Magnetic paper clip dispenser

Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…

Downloads
136
Likes
24
Rating
0

NEM362 magnetic coupler

Current conducting coupler for modeltrain are expensive. So both hobbyists and commercial vendors came up with the idea of a magnetic, current conducting coupler. This is my take on the that concept. What you need per car, so for two…

Downloads
123
Likes
3
Rating
0
P
PrintablesIrgendeintyp

Magnetic bit screwdriver with print-in-place freewheel

Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.

Downloads
121
Likes
16
Rating
5
P
PrintablesoXiVanisher

Harder and Steenbeck Ultra magnetized storage

A storage for the Harder and Steenbeck Ultra airbrush. You need 8x 6 x 2 mm magnets This is part of my magnetically stacking “Airbrush Storage” system. Check out more parts for this system and my other airbrush models here on printables .…

Downloads
109
Likes
15
Rating
0
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Downloads
102
Likes
46
Rating
5
P
Printablessquinn

Circumvolving Dice Case w/ Hidden Magnetic Dual Latch

A curvy eye-catching case with a rotating top that uses hidden magnets to loosely lock the top in place in both an “open” and “closed” position. The three compartments are sized to conveniently fit the standard 7 dice often used in DnD…

Downloads
101
Likes
53
Rating
5
P
PrintablesEmery

ClickTags - magnetic nametag with attachable interest wings - the queer & kinky nametag

The ClickTag is a nametag that was originally designed for a kinky event to enable people to show their contact interest and role. Attach or detach one or up to four of the color coded wings as your mood or interests change - they snap…

Downloads
94
Likes
20
Rating
0
P
PrintablesoXiVanisher

Harder and Steenbeck Evolution magnetized storage

A storage for the Harder and Steenbeck Evolution airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…

Downloads
91
Likes
13
Rating
0
P
PrintablesRutgerM

Hot Wheels magnetic holder whiteboard or fridge

A shelf that has room for 5x5mm round magnets to display hot wheels or other 1/64 scale model cars on fridge or shelf Works with 2 magnets, but has room for 5. Have printed in pla 15% infill.

Downloads
87
Likes
17
Rating
0
P
PrintablesAnde

Magnetic compass

You'll need a 20x10x2 mm square magnet. Use slot in the compass to put the magnet in. You can add a bit of glue, but check the polarity before - if magnet is reversed, then North points to South. Then just turn the magnet around. Magnet…

Downloads
87
Likes
23
Rating
5
P
PrintablesPIZZA_CAT

MAGNETIZER (DEMAGNETIZER) FOR SCREWDRIVERS FROM HDD MAGNETS

A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…

Downloads
86
Likes
33
Rating
5
P
PrintablesactualSIZE

Needle Minder - Magnetic Embroidery Needle Clip

This print uses special gcode that merges color changes along the x/y path. Don't slice yourself, just use the gcode and make the manual color changes when prompted by the printer. The color changes are in this order: Thread color, Spool…

Downloads
82
Likes
74
Rating
0
P
PrintablesMonkey Prints

Magnetic Pen Holder for Whiteboard Marker

Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…

Downloads
82
Likes
14
Rating
5
P
Printablesdesignshot

Magnetic Lid with Filling Slot for KitchenAid Mixers

Magnetic lid tailored specifically for KitchenAid mixers (4,3 l bowl). This unique accessory not only ensures a snug fit to prevent spills but also comes with a convenient filling slot, allowing you to add ingredients seamlessly while…

Downloads
81
Likes
16
Rating
0
P
Printablespavel

Magnetic Gel Holder Ring for Godox AD100, AD200, V1 (Ø 3 × 3 mm Magnets)

Overview Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm. Compatibility Godox AD100 Pro Godox V1 (all mounts) AD200/AD200 Pro with H200R round head…

Downloads
77
Likes
14
Rating
5
P
PrintablesAzJake

Magnetic Sharpie Holder

I wanted a way to store a Sharpie (paid link) on my deep freezer to allow adding dates and details to food packaging. This model has two 1"x ½"x .125" magnets (paid link) inserted into the model during printing. I had these magnets…

Downloads
76
Likes
20
Rating
0
P
Printableslufa

Small box with lid and covered magnetic clasp

Kleine Box mit Deckel, verdecktem Magnetverschluss und Motiv im Deckel. Es ist auch ein neutraler Deckel dabei, den jeder selbst gestalten kann. Für die Motive ist im G-Code ein Farbwechsel drin. Die Magneten sind Neodymmagneten mit 7mm…

Downloads
73
Likes
8
Rating
0
P
PrintablesMikey B

Magnetic PTFE Tube Connector

I wanted a fully 3d printable variation of the magnetic connectors for my dry box connections. unable to find something resembling the brass push connectors, I found firstgizmo 's model and remixed it with Line Arc Line 's tri magnet…

Downloads
72
Likes
4
Rating
0
P
PrintablesdePrintinator

Contemporary Magnetic Door Stop

This is a simple magnetic doorstop activates when you position the door over it, but otherwise allows the door to function normally. When inactive, it has a low profile, easily allowing a vacuum cleaner or mop over top of it. Bill of…

Downloads
71
Likes
25
Rating
5
P
PrintablesMalatoke

EasyLight Compatible Magnetic Adapter (For RC Planes)

Winds tend to die down around dusk each day making it a great time to fly RC, and lights make that even better. I picked up a pack of "EasyLights" battery powered led strobe marker lights, but I don't want to have to buy a set for each…

Downloads
71
Likes
12
Rating
0
P
PrintablesRABBIT

Magnetic multicolor Arecibo Message

The Arecibo Message was an interstellar radio broadcast carrying basic information about humanity and Earth that was sent to the globular cluster Messier 13 in 1974. It lasted for three minutes and contained roughly 210 bytes of data…

Downloads
71
Likes
25
Rating
5
P
PrintablesoXiVanisher

Magnetic base tags for 25, 28, 32 and 40 mm round bases.

Add a color change at the appropriate height to make the numbers more visible. Glue some washers or similar into the center to let the magnetized minis grab on. The numbers are meant to be placed on corresponding character sheets. The…

Downloads
68
Likes
12
Rating
5
P
Printablespaururo

Magnetic Micropipette Holder for Efficient Lab Organization

Unleash the functionality and convenience of 3D printing with our free, custom-designed micropipette holder featuring integrated magnetic inserts. This holder comfortably accommodates 4 magnets of 6x3mm each, ensuring your micropipettes…

Downloads
67
Likes
13
Rating
0
P
Printablescrashkg

Systainer Magnetic Label Mount

Print this with Snug supports off the build plate only with the magnet holes facing up. They should be super easy to tear off the runners on the side of the label mount. Now you can stick bits or anything else ferrous to the front of your…

Downloads
67
Likes
13
Rating
0
P
Printablesqse

Magnetische Kabelhalter mit variabler Magnetkraft

Hierbei handelt es sich um einen Remix des Models von rtarbutton (dickes Dankeschön ;-) ) mit dem Namen “ LTT Magnetic Cable Arches ”. Die Gründe des Remixes waren Die Konfigurierbarkeit der Magnetkraft durch den Einsatz verschiedener…

Downloads
67
Likes
5
Rating
5
P
PrintablesRonny

Magnetischer Kopf von Mops Buddy

Das ist der Kopf von Josef Prusas Mops Buddy, den ich als Kühlschrankmagneten umfunktioniert habe. Beim Drucken wird eine Druckpause eingelegt um ein 8mmØ x 3mm großen Magneten einzulegen (siehe Bild).

Downloads
65
Likes
5
Rating
0
P
PrintablesDarius V

Magnetic tray (with source files)

Very simple and easy to print magnetic screw tray with 9 integrated magnets. Magnets are snuggly press-fitted, so glue is not necessary. There is also an optional 1 layer thick sheet, that can be used as a cover for the magnets. It also…

Downloads
62
Likes
16
Rating
0
P
PrintablesTüftler

Magnetischer Schutzdeckel für Motorstecker (Rosenberger) am Specialized Turbo Levo MTB

Der Schutzdeckel mit eingeklebten Magneten kann auf den Motorstecker meines Specialized Turbo Levo MTB gesetzt werden, wenn das Fahrrad auf einem Gepäckträger transportiert wird. Dadurch sind die empfindlichen Kontakte geschützt, wenn es…

Downloads
61
Likes
6
Rating
0
P
PrintablesBenCo Studios

Stray Game Magnetic Medalion

This can be printed with a pause to insert magnets, or without if you don't need it to be magnetic. Play around with perimeters to customize effect, photos show 30 permiter model! Magnets were advertised as 5mm x 2mm, but in reality they…

Downloads
61
Likes
19
Rating
0
P
Printablesfivesixzero

EKWB EK-Quantum Kinetic TBE D5 Reservoir Bench Stand

This is a simple vertical stand for holding an EKWB EK-Quantum Kinetic TBE D5 upright while using it on a workbench or table. It should work with any D5-based EK-Quantum Kinetic pump/reservoir without any issues. Also created a radiator…

Downloads
57
Likes
5
Rating
0
P

Fidgit - Magnetic 34 x 60 Smaller Hex

This fidget is smaller than my similar larger fidget. This one fits more easily in your pocket. Carry several in your pocket and pass them to friends or anyone you meet. It compresses with your finger or thumb and returns to the extended…

Downloads
56
Likes
3
Rating
0
P
PrintablesMrFlippant

Fortnite Foundation Magnetic Fidget

I uploaded gcode and a 3mf for Prusa Mk3s, but that's not a requirement. You can use any slicer and printer and set up manual filament changes. Don't forget the pause before the layer that covers up the magnets. This model is designed for…

Downloads
55
Likes
9
Rating
0
P
PrintablesBooks

G2 Pilot Pen Magnetic Holder

A magnetically mounted pen-holder for the Pilot G2 pen. Uses 6mm diameter magnets that are 3mm thick.

Downloads
55
Likes
11
Rating
5
P
PrintablesClamikra

Magnetically attached neck and base for Full Sized Voronoi Head

I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…

Downloads
54
Likes
6
Rating
0
P
PrintablesVolшeбniк

magnetic axe scabbard, axe cover

To fully assemble the product, you will need 3 magnets measuring 5 by 2 mm Printing: Standard parameters. I used PETG bestfilament

Downloads
54
Likes
12
Rating
0
P
PrintablesJack Yu

Magnetic 3 in 1 Ruler Clip: Marking Gauge, Depth Gauge, Calipers

This ruler clip is designed for a 6" machinists' ruler such that you can lay it flat on a sheet of paper and slide it around. It fits a 3/16" diameter magnet, but this can be modified in the Solidworks file or the STEP file. If two of…

Downloads
53
Likes
39
Rating
0
P
PrintablesTJL

Sovol SV06 Decorative Magnetic Screen Cover

Sovol SV06 Magnetic Screen Cover utilizing 6x2mm or 6x3mm magnets. I had not realized that the Sovol SV06 Screen was on a ferrous metal plate. For some reason because it did not look like sheet metal, I thought it was something else. Then…

Downloads
52
Likes
11
Rating
5
P
PrintablesDessR

Magnetic Kleenex Box Mount

This a simple magnetic mount for a kleenex box or other tissue box to mount it under a shelf, under a desk, or against a metal wall. Note Designed for 8mmx3mm (2.65mm actual height) magnets The internal dimensions are 230mm x 122mm x…

Downloads
52
Likes
12
Rating
0
P
Printables3DFW

MagnoWrap Rook Chess Tower – Flexible Magnetic Chess Board with Storage

The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…

Downloads
52
Likes
30
Rating
0
P
Printableswildstallion

Newer R3 XL side filament sensor with reduced force (magnetic)

Newer R3 XL side filament sensor with reduced force (magnetic).

Downloads
52
Likes
6
Rating
5
P
PrintablesHarrisCK

Magnetic Legion Go Speaker Director For 6mmx3mm Magnets

The original model had incorrectly sized holes for 6x3 magnets. This is a quick and dirty fix using negative volumes to give the correct clearance. When opening the 3mf file use the import geometry only option.

Downloads
48
Likes
2
Rating
0
P
Printablesmbrs

spongebob squarepants brain magnetic rubik's cube 2x2x2

Greetings this is rubik's cube version 2 referring to the animation spongebob squarepants and his soft brain You will need: 1 ballbearing 20mm diameter 8x 5x5mm round magnets These can be found at any local hardware store here is the link…

Downloads
48
Likes
20
Rating
0

Ender series - 4020 Fan - Magnetic Mount | Ender 3 - Ventilador de capa 4020 - Magnetico

Español: Esta es una montura magnética diseñada específicamente para impresoras 3D Ender 3. Incluye un ventilador 4020 que proporciona un enfriamiento eficiente del extrusor o la pieza de impresión. Su diseño modular permite una…

Downloads
46
Likes
9
Rating
0
P
PrintablesoXiVanisher

Airbrush magnetized storage for bottles

A magnetized storage bin for airbrush bottles (primer, cleaner, ...). You have to print this two times and then stack and glue and ideally screw it together. You need: 8x 6 x 2 mm magnets 4x M3 x 6 mm (or longer) screws 4x M3 nuts This is…

Downloads
46
Likes
10
Rating
0
P
PrintablesMrFlippant

Nutter Butter Magnetic Sliding Fidget

I legit went and bought a pack of Nutter Butter cookies to design this fidget. Not that I needed an excuse to get them, of course. ;-) I traced the design from a photograph I took of an actual cookie, so the dimensions are pretty much…

Downloads
45
Likes
18
Rating
0
P
PrintablesoXiVanisher

Smartstore mini storage (for magnetized minis)

Two floor mini storage for the Smartstore.se 34x25x16 cm storage boxes. The lower floor is about 63 mm in height and the top one 60 mm. Those boxes are sold by Jumbo and Coop in Switzerland. You need: 8x 10 - 40 mm long M3 screws with…

Downloads
45
Likes
19
Rating
0
P
PrintablesWinky

Air intake vent on door with magnetic closure

This 2-sided minimalist/contemporary style vent was designed to be mounted on closet door to increase air flow. The best result from my machine comes from turning off IS - it maybe my own fault as I'm still trying to getting use to IS but…

Downloads
45
Likes
12
Rating
0
P
PrintablesThaix03

Magnetic Buddy3D – Core One Camera Cover Mount

This is my simple solution for storing the camera cover that comes with the Buddy 3D Camera for the Prusa Core One. The holder is magnetically attached to the enclosure using a 3×6 mm round magnet . To insert the magnet, simply pause the…

Downloads
44
Likes
11
Rating
5
P
PrintablesoXiVanisher

Airbrush magnetized storage for airbrush tools

A magnetized storage bin for airbrush tools. This bin has a total height of 28 mm and the inner height is 26.8 mm. My Harder & Steenbeck nozzle and air head case fits perfectly inside it. You need 8x 6 x 2 mm magnets This is part of my…

Downloads
43
Likes
10
Rating
0
P
Printablesjshank

Andonstar Microscope LED/Flexilight Magenetic Adapter

DanAndersen remixed Arie Kanarie design for this fantastic mount but I'm already using a VESA adapter for the microscope and wanted to use the flexible LED lights with my metal soldering station. I added a few more steps to his Fusion…

Downloads
43
Likes
12
Rating
0
P
PrintablesoXiVanisher

Airbrush magnetized storage for random stuff

A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…

Downloads
40
Likes
6
Rating
0
P
PrintablesAnderl

Suzuki Jimny 2018+ (GJ/HJ) magnetic rear window sunshade frame

For one Window you need: 2x window_frame_straight piece 4x window_frame_corner piece magnets: 24x round magnets, 6mm diameter, 2mm height (use a stack of two at every insert) OR 12x round magnets, 6mm diameter, 4mm height fabric of your…

Downloads
39
Likes
1
Rating
0
P
PrintablesIceburn

Adjustable Bobbin Storage Box with Magnetic closure

This is a remix on a bobbin storage box. I initially printed that box, but my wife immediately snapped of the latch. So, I remixed it to use a magnetic latch instead. The hinge pin is just filament. Just press a length of filament through…

Downloads
39
Likes
7
Rating
5
P
PrintablesNotReallyLex

Minimalist Magnetic Marker Clip

Intro A fast printing minimalist magnetic clip that keeps your fine point Sharpie® marker on the fridge, whiteboard, or any magnetic surface, always visible, always within reach. Available in three versions to fit different magnet sizes:…

Downloads
39
Likes
3
Rating
5
P
Printablessilasborowy

Magnetic 90mm Fan Holder for Type33 Radiator

The fan holder is meant for attaching a PC fan to a heating radiator to increase efficiency of the radiator by active ventilation. The bracket makes use of three 10mm x 2mm neodymium magnets to attach a 90mm PC-fan to a type33 radiator.…

Downloads
38
Likes
13
Rating
0
P
Printableskennyd1gital

Dry Erase Pen (Slim) Holder for Magnetic Whiteboards

Simple magnetic holders for the slim style (Expo or other brands with a similar style) dry erase pens. The magnet is inserted into the print with a print pause at the appropriate layer. Required Non-Printable Parts: 1x – 12.7 x 3.2mm disc…

Downloads
37
Likes
4
Rating
0
P
PrintablesSan G Dice

D20 Magnetic Storage Box

This is a simple D20 with a lid and in the main part it has a spot where you can store stuff, like dice, money, candy, and whatever else you can fit. It's 100mm at the largest point (while the top and bottom are connected) I added a tab…

Downloads
34
Likes
17
Rating
0
P
PrintablesTFL123

Magnetic bowles

Magnetic shells that act magnetically on the inside as well as on the base and reduce the chance of losing a screw when tinkering. All printed in Place. Previous variants are two flats that are 70mm in diameter and 28mm in height. And 2…

Downloads
34
Likes
15
Rating
0
P
Printablespipersw

magnetic pen holder for white board

magnetic pen holder for white board, with magnet 20mm x 5mm The pen are Stabilo MARKdry, wipe with only water https://www.supermagnete.fr/aimants-disques-neodyme/disque-magnetique-20mm-5mm_S-20-05-N

Downloads
34
Likes
4
Rating
0
P
Printablesbart

Ooznest Workbee Z1+ quick-swappable magnetic dust shoe v0.3

Intro This is an updated and modified version of my previous Workbee dust shoe . The previous version had a wing nut sticking out of the side (which I found a bit annoying although it wasn't hitting the Workbee frame) and the attachment…

Downloads
33
Likes
4
Rating
0
P
Printableszachi40

Bosch GDR Bit Holder (Remix of Magnetic Bit Holder for Bosch Drill)

This remix modifies the excellent original Bosch GDX magnetic bit holder to work with the Bosch GDR impact driver series. Changes include: Added through-holes so long bits can pass completely through. Maintained compatibility with…

Downloads
33
Likes
4
Rating
0