Search results: plug

Google Nest Mini 2nd Generation Wall Plug Mount

Google Nest Mini 2nd Generation Wall Plug Mount. Only tested with US power supply. Enjoy

Print in place earplugs case

This is a simple earplugs case for travelling or just for storage. It prints in place without the need for supports or other mechanical operations after printing. It might close and open a bit harder at the beginning, but after a few…

Vagina Outlet Plug Cover

#0073 xRivets for Original Prusa Enclosure OPE (Extra Rivets / Plugs)

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…

Onewheel Pint charger port plug

Charger port plug for Onewheel Pint. I lost mine so I modelled one myself. Tested with PLA and fits tightly. Apologies for my beat up Pint. Print instructions 0.2mm layer height. Supports from buildplate. Everything else at your discretion.

Honeycomb Wall Euro Plug Charger Mount - HSW USB

A mount to store your phone charger on the honeycomb storage wall. Also works with bigger chargers like the OnePlus Warp Charge 65, or with other Euro-Plug devices that are not USB-Chargers. Fits CEE 7/16 Alternative II "Europlug" (Type…

Steam Deck + Dock Carrying Case Insert US Plug (two MicroSDs Slot)

Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…

Ear Plugs Easy Case

I created a Ear Plugs Easy Case for everyone, who need case for Your noise canceling plugs :-) It is very simple and very practical. Is for everyone, who need protect Your ears agains noise :-) This model I created entirely by myself and…

Core One (+/L) Top Corner Plug (Remix)

Purpose The Prusa Core One (+/L) frame's sheet metal parts do not form an air-tight and dust-proof seal in the top corners. The present corner plug remedies that shortcoming. Features Unobstrusive design Does not need magnets but snaps…

Google Nest Mini 2nd Gen Wall Plug Mount - With Cable Stop Hooks

This is a very simple remix of Franco 's very elegant design of a wall socket mount for the Google Nest Mini 2nd generation. Instead of securing the cable with a separate back plate, I added three little “hooks” to retain the cable…

57180 Oil Filter Plug Tool

Threads into the filter for a secure seal so the filter can be removed from the tight space without spilling oil. Suits: 2013-2019 Dodge Ram Cummins Chrysler Part 5083285AA Oil Filter

Square tube plugs

PETG print files for: 20x20x2 25x25x2 30x30x2 30x30x3 35x35x2 35x35x3 40x40x2 40x40x3 (millimeter sizes) There is also the FreeCAD file if you need a different size.

Wall mount for type 2 plug and Juice Booster 2 (electro mobility) - Wandhalterung für Typ 2 Stecker und Juice Booster 2 (Elektromobilität)

You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…

Pixel Watch 2 & 3 charger with cable winder and plug mount (USB-C & USB-A)

Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.

Prusa Mini & Mini+ USB-Plug and Power Switch Frontplates

These are new front plates to extend the Prusa Mini & Mini+ power switch and USB-plug. I mainly made this to place the Prusa Mini into my in height modified Ikea Kallax, like seen in the picture. It fits perfectly with only 6mm of space.…

Electric Plug Handle - Schuko / CEE-7-7 / IEC

About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…

👂Ear plugs case, no texts.

Info: i like the original (thanks @KERLE MAKERSPACE ), but I am not an Apple fan so this model is the same but without “iPlug” or any other texts Print instruction: no supports see 3mf Assembly just like in original, you need 1.75mm…

Prusa Core One Magnetic Corner Plugs

Use this print to plug the corners up Needs 6x2mm magnets. I used 3 per print since I was short and that seemed okay It's certainly not perfect as there's a minor gap still but this is just a really quick cut to match the webcam mount

Affordable Sensory Earplugs

Greetings all! This is a set of sensory/noise reduction earplugs for individuals who are looking for a little bit of noise reduction for everyday activities, like going to the movies, being in a loud restaurant, and much more. These are a…

ACME / QCC Type 1 propane female cap and male plug

The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose…

NPT Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Festool Plug-It adapter for Makita Compact Router RT0701C

Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…

Wallmount + Cable Organizer for Electric Car Type 2 Plug (logo / no logo)

Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…

earplugs box

A remix of the very nice model iPlug by KMS by KERLE MAKERSPACE optimized for uvex x-fit earplugs For the joint you need a 15 mm long piece of 1,75 mm filament. Changes to original model -shortend by 5,7 mm -changed ratio between lid and…

Type G (UK) Plug Safety Cover

My generic step-down transformer from 220v to 110v has a front output that is just taped off. I wanted a more reselient and permanent solution - so this is it. You can, like I did, put a dollop of two-part epoxy glue to the middle of the…

naruto kunai (cut with plugs)

Just cutted the model and putted 3 plugs and holes for correct alignment when putting together :-)

Ender 3 Cable Chain, no screws, no unplug cable by NG_Design

I tried to find the original here on Printables but I couldn't find it, so posting here so the Prusa-peferrers can find it too! This is an awesome cable chain that clips directly on to the Ender3/Ender3Pro's extruder and body rails…

Baby safety outlet plug cover

Hello Our babies are so curious and love to explore the world ... but when they are interested in electrical outlets the risk of electrocution is not far away! So I decided to design this safety outlet plug cover to prevent any risk. The…

sunlu s4 plug

since i have my s4 i also start to use it for longterm storage but to keep the moisture to a minimum i closed the holes update : first version was low profile but you need an little knife to click the ring down but now i made it higher so…

BSPP Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Expanding Bar-End Plug for Road bikes

This minimalistic bar end expands from 18mm up to 21mm, locking your bar tape in place and giving your bike a nice detail depending on the chosen color. The bar end will of course also fit mountainbikes and other handlebars. The mechanism…

1/2 inch / 13mm Irrigation Tube End Plug

Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Astronomy covers, caps, and plugs

Covers and caps for some commonly used sizes in astronomy and astrophotography. I find that sometimes I am missing a cap and I was unaware of a good collection, so I decided to design my own and bundle them. There may be some slight…

🖖 Middle finger interchangeable party glasses plugin.

Info: extended lens plugin to be inserted into these party glasses recommending more angled temples because this model weights something, so you need to carry it more safely. lenses are: interchangable you can print your own pattern using…

Drain Plug Karcher WD6

After losing the drain plug of my karcher vacuum cleaner, I modeled one that I share with you here. I preferred to print it in PETG but I think PLA can be good too. In addition to the printed part you will need an 17x3mm O-ring to seal…

Replacement Safety Gate Plugs (Munchkin Pressure Fit Gates)

Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.

Prusa mini enclosure plugs for the bottom panel

The Original Prusa MINI Enclosure 1.0 has two big holes in the bottom panel. I made these plugs to seal them in the hope to preserve a little more heat inside the enclosure. You can find three different plugs here: covering the whole hole…

Small Cable Organizer for Power Supplies with Euro-Plug

Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…

HDD hotplug cage 6 bay for Supermicro Backplane BPN-SAS-823T

HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…

Audio Cassette Tape Tab Out To Tab In Conversion Plug

Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.

BMX Bar End Plug

This is a bar end plug for a BMX handlebar. Note render of .3mf looks odd since there's a cylindrical ‘print setting’ modifier in there as well(see below). Plug has 18mm outer diameter with a wedge that can secure into a 19mm opening.…

Cord Clip Plug Keeper - Four Versions

Note added Jan. 6, 2022 : Since I made this, I created another version for flexible filament: https://www.prusaprinters.org/prints/114467-cord-clip-plug-keeper-flex-version-two-sizes These simple clips are designed for standard power…

Original Prusa Enclosure (OPE) - PSU Cable Quick-release Plug Housing

Update V4: Closed a small gap in the bottom part. The plug of the PSU quick-release cable is not nice to look at with the exposed cables. It looks much nicer with a housing! Fits the MK3S+ and the MK4 version oft the cable. I know, there…

Print in place double earplugs mini box

This is a print in place earplugs case. I like to use earplugs specially when travelling and I couldn't find a suitable earplugs container, therefore I designed one. It does not need any supports or other operations after printing. It…

Earplug keychain container

This is a keychain container for your earplugs. The container consists of two parts that screw into each other. Print settings: Material: PLA Layer height: 0.2mm (otherwise the screw thread won't print correctly) Advanced: in PrusaSlicer,…

EU Steckdosen cover/ EU plug cover

EU Steckdosen cover/ EU plug cover by qubee baby protect

Plug-in power supply cable organizer

This cable organizer remains on the plug-in power supply while it is plugged in. This means you don't have to look for it when you unplug the power supply and want to store the cable inside. It is for Euro plugs, which are used in most…

🎊 Pacman interchangeable party glasses plugin.

Info: extended lens plugin to be inserted into these party glasses recommending more angled temples because this model weights something, so you need to carry it more safely. lenses are: interchangable you can print your own pattern using…

Torus Sound Dampening Earplugs

An earplug with a hollow core torus that leads to the earpiece. There are little slits on the outside of the torus that allow sound through. dampening but not blocking it completely. Great to make white noise sounds like AC units and…

Male Garden Hose Plug (now with Female Cap)

Needing something to plug a few garden hoses for Winter, and not being completely satisfied with the other hose plug models on printables, here's what I came up with. New Addition (2026-05-14): I've just encountered a need for a cap (the…

Drysuit plugs for leak detection

If you're a cold-water diver, you most likely have a drysuit. And if you have a drysuit, you most likely have experienced the joyous feeling of that cold trickle running down your arm, back, neck or leg. The easiest way to detect a leak…

eSUN eBox Plug

This is a plug for the filament hole on the eSUN eBox/eBox Lite when used “only” as a dehydrator, e.g. when to dry filament for storage or to dry desiccant. This is based on Duane's “ eSun eBox Fittings ” model. Update 20230731: New,…

Motorcycle Chassis Plugs

These are parametric plugs for motorcycle frames. I've included presets for the Honda CB300R chassis and pillion holders. The frame plugs require a 20mm stem, but the left and right pillion holders are asymmetric: the left plug requires a…

🎊👻 Pacman Ghost hunter interchangeable party glasses plugin.

Info: extended lens plugin to be inserted into these party glasses recommending more angled temples because this model weights something, so you need to carry it more safely. lenses are: interchangable you can print your own pattern using…

Ear plugs insert tool

Nothing extra to say about it. It fits to original aluminium Alpine case.

Do Not Unplug Sign

I designed the signed to attach to a power cable so that is not unplugged by mistake. The model has 2 parts, a front plate with the text and the backplate for contrast. You don't need the backplate but I think it looks cool. Print…

Synology DS220j Power Plug Lock

Keep your NAS power plug secure by using the Kensington Security Slot! Specs ✅ Synology DS220j compatible Print tips 🧩 1 part ⮑ Print original orientation from the STL ✨ Support free! 🏋️ 15% infill 3 perimeters can help with strength PETG…

Core One L Temp Towers (Plug'n Play)

Just download and run. see also flow testing.

24 mm socket for removing RV water heater drain plug

This was design to fit the very tight space for removing the water heater drain plug on my motorhome.

Plugin Servo Connector

This is a servo connector compatible with the Skywing RC connector system. Designed to be printed in PETG with supports on "build plate only". Fits standard Servo connectors, i used the powerbox servo plugs and sockets. The connector…

32 mm rockshox recon steerer tube plug

this is a remix to make the plug fit a 32mm steerer tube

Camper RV Water Heater Drain Plug Wrench

This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…

Plug Follower - set of 4

Recommended print settings: Material: PLA/PETG Layer Height: 0.10 Infill % : 50 Supports: None Print Orientation: Default as modeled

unplug helper

somtimes is hard to unplug an EU Schuko plug, this is a helper. I know that the back of the plug are not all the same but I have couple of this

Over-engineered HomePod Mini wall mount (EU Plug)

Context After searching for a good HomePod Mini wall mount, I always encountered the same issues. either no cable management, or hanging below the socket, and most important with all the weight on the tiny Apple charger. Why yet another…

Tiny container - For ear plug or tiny stuff

Why I sleep on my side and only use a single ear plug. Used to put one in my wallet, and now I have this tiny container for it. You can also use it for other small things like medication, a secret note, a 0.01 nozzle printed statue of…

Original Prusa Enclosure (OPE) Back Widow Left Edge Plug with Cord Pass Through

I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…

Benchy drain plug for sink or bathtub.

A theme in my models is the absurd amount of support material. If anyone knows a good angle for supports please leave a comment.

Dust plugs for mobile phones

Hello, Today I have for you Dust Plugs for USB C, Micro USB and Iphone lightning mobile phones. The plugs prevent dust from entering the charging port. Suitable for all devices that have these ports. I used PLA/PETG as the material. No…

Toilet Paper Tube and Plugs

Model for representing an empty toilet paper roll, and printable plugs that press fit in both ends. The STL and STEP files are for rolls with a 42mm inner dimension, based on Kirkland brand rolls from Costco. The parametric FreeCAD source…

Supporting Europlug adapter for old Swiss T13 Socket

⚠️ Disclaimer: this project is coming in contact with 220V electricity. Be careful when doing any changes to your power outlets (because you or others may die). Old Swiss sockets do truly badly when supporting a plug. This is a…

Sub Zero Trailer/Hitch Plug

I currently moonlight design for a company called Sub 0 Angling. they make hand crafted custom ice fishing rods and gear. I was playing around with some ideas and threw this together. If you are into ice fishing or angling of any kind…

Radiator side plug - no supports

Print settings: Nozzle 0.4mm Layer height: 0.20mm Perimeters: 3 or 4 Material: PETG, ASA or better Infill: 15 percent Suports, brim: NO Note: STL is oriented to print.

Prusa Plugs v.1 (Ear Gauges)

These are Prusa themed ear plugs that I designed in Tinkercad. Scale to fit, but sized @ a 1". My very first design on my first printer!! A Prusa Core 1+

Water pump CO plug 1 1/2

G 1½ inch plug for CO pomp omnigena. If there are problems with dimentions - scale model up to 1000% in slicer.

Canyon Bike Frame Plug E 237-15

Replacement for canyon bikes to change the cable plugcover on the frame referenced as E 237-15 ( overall dimensions 26 x 9.5 x 9.5 mm) to do not loose it again i've done this : Printed in ASA in an enclosure 100% Infill 0.1mm layers put…

LM2596 StepDown Case With JST plugins

I wanted to add RGB lighting to my housing where the printer is located. I had RGB and wanted to use them, but RGB works on 5V, so I installed the StepDown module and added a JST plug to make it more practical. I take power directly from…

Square Parametric Truck Bed Plugs / Caps

This model is used to cover square holes in truck beds or any other square hole. No support is needed for the model. PETG was used for durability. Both Fusion360 and FreeCAD models are provided. They are parametric and can be modified…

Bathing tub plug lifter knob | Badewannenstöpsel-hebe-knopf

This part broke after two years: You turn it and the plug of the bathtub lifts up. This model fits tight on a “male” hexagonal fit. The square hole on the bottom lets woo mch water run out of the emergency overrun of the tub. Dieser…

MMU Grommet Plug for Original Prusa Enclosure

Plugs for the MMU Grommet for the Original Prusa Enclosure. Please note, this is a press fit. It may take a little force to get it in and out of the MMU Grommet. 5 Variations so far: Solid plug Plug with USB cable cutouts top and bottom…

N6ARA Morse Paddle (Plug Model) Case

This is a case that houses the N6ARA Morse Code Paddle (The plug model) and the adjuster that comes with it. The clearances are so that both the key and the adjuster should hold in place with friction. You will most like need to do a…

Hidden Dynaplug Racer Tool Holder

A mini project we have here, securely storing Dynaplug's Racer Pro tool inside a mountain bike handle bar which is used to rapidly seal punctures in tubeless tyre systems - mainly in mountain bikes. Check their site if you're a little…

Flush Plug for InLine Fabrication Flush Mount Quick Change Base Plate

A flush, no-snag plug for the hole in an InLine Fabrication Flush Mount Quick Change Base Plate for when there's no quick change plate attached. Prevents small objects and debris from falling into the hole in the base plate when there's…

DSM Eclipse / Talon 2G 3rd Brake Light lock Plugs

Simple Plug to hold solid the 3rd brake light housing into place

IKEA Shoe Cabinet Drawer Guide/Stopper Plug

I bought and old IKEA shoe cabinet (probably an old version of the Hemnes cabinet ) to remodel it into custom one that better fits into the room. While the cabinet was in a good general shape, many of the little plastic plug that guides…

Multiboard Charger / Transformer holder (Europlug)

The holder uses the flexible MultiConnect connector. Just attach two MultiConnect connectors to your board and then mount the holder on these connection points. Recommended print settings (same as Multiboard defaults): 3 wall perimeters…

Mean Well NES-350-24 Power Supply Cover - Plug Facing Rear

When changing to a Mean Well NES-350-24 power supply, I realized that the plug socket and switch housing was not going to fit nicely due to the orientation of the screw contact terminals on this power suply. This cover gives more space…

IKEA Hack - Marius Stool - Plug

A little addition to add some color to your IKEA stools. Snaps into the holes of the stool and makes it look a whole lot prettier. Doesn't fall out unless you knock it about or press it out. I found that I have 2 different models of the…

Twist-Lock Plugs for RepBox 2.5.1+

For RepBox version 2.5.1 and up that include the new twist lock style ports only. These new printable twist lock plugs are way easier to install and exert less stress on the acrylic panels when being installed. Print as many as you need…

Märklin H0 modular Steel Girder Bridge Rail-C R3-30° Element (multi part, pluggable) / Märklin H0 modulare Stahlträger-Brücke Gleis-C Element R3 30° (mehrteilig, steckbar)

Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…

SKYRC MC3000 XT60/banana plug adaptor | XT60-/Bananenstecker-Adapter

This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…

12 volt/USB plug adapter

Screw holes are 5mm. Adapter hole is 30mm. Print in PETG or something that will stand up to the heat of a vehicle.

Märklin H0 modular Bridge Rail-C R3-30° Element (multi part, pluggable) / Märklin H0 modulare Brücke Gleis-C Element R3-30° (mehrteilig, steckbar)

Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…

BOSCH GWS13-50VSP Plug-It adapter

Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 491996 (High power version, from the Festool Router OF1440, since the grinder can draw 13 amps) two #6-32 x ½'' machine screws To…

Sink hole plug

This 3D-printed sink hole plug is designed to fit snugly into a standard sink hole, with a height of 36mm and a radius of 30mm. It's a practical and durable solution for preventing water drainage issues, offering a simple, reliable fit…

ø22mm Blind Plug

About This is a blind plug to close unused ø22mm button/indicator mounting holes in control panels and other industrial operating stations. The blind plug is designed for a panel thickness of up to 5mm. This blind plug is not watertight…

Speaker Magnetic Connector Plug / Coupler

I've created a magnetic connector and coupler to simplify speaker wiring. Printing: The plug is designed in two parts (split in PrusaSlicer) Easy2Print, 0,2mm PETG without supports Coupler Easy2Print 0,2mm PETG with supports from base…

Steer Tube Cork/Plug for tubeless repair kit

Steer Tube Cork for Fox 36 with Storage for this tubeless repair kit: https://www.amazon.de/gp/product/B097GCH7H8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 The repair kit and the cork must fit tightly so that they do not loosen on…

Beginner Flute Key Plugs / Bouchon clés flûte traversière

Beginner Flute Key Plugs