3,174 models
This model includes almost all of the deployment steps of the James Webb Space Telescope including: Solar Panel Antenna Fore and Aft Sun Shield Pallets Left and Right Sun Shield Boom Extension Aft Momentum Flap Tower Deployment Secondary…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This simple gyroscope fidget prints in about 45min and spins remarkably freely. I usually carry several of these to give away as gifts, and they are some of my most popular prints
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
Updates! Reorganized parts listing for clarity About After spending some time trying to use a telescope camera with the wonderful Hadley telescope by Maff , I decided I needed a focuser that didn't rotate. Rather than wait, I decided I'd…
Print approx. €6.78–€8.29 excl. taxPreliminary estimate for one variant
EDIT 03/04/2023 Added f3d and STEP files so these can be remixed. __________________________________________________________________________ Designed a system of parts to create a means of mounting the Hadley to a tripod in a very sturdy…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
This is an easy to print JWST model with mirrors and support structure as they appeared during assembly and testing prior to being covered with protective material for launch. My way of teaching myself to use reference images for 3D…
Print approx. €8.34–€10.20 excl. taxPreliminary estimate for one variant
Who doesn't love a Bug-A-Salt fly killer? I love mine and I love the looks I get when I bring it out and eliminate those pesky flies and other bugs. Just for fun, I made this snap-on version of a rifle scope to make my Bug-A-Salt even…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
Made out of PETG for Flexibility and Heat Resistant Hardware: 1x M3 20mm cap head screw 1x M3 nylock nut 42mm Zoom ring:
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Added folding print-in-place arms. Results in a cleaner print and a more accurate model!
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
The design is sturdy and saves about 800 g compared to a metal version. The dovetail uses the Losmandy mount points (3'') of the Celestron AVX mount and has alignment stops for easier mounting at reproducible positions. The parts are…
Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
Make it a bit easier to stand your Hadley on the ground without the worry of tipping over. This is a remix of basically the same thing by emaxduck, however I found that model to be too small to stick onto a ½" aluminum rod. Have to assume…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Microscope arms are expensive. What isn't expensive are the multitude of vesa monitor mounts available. I wanted to use a vesa compatible gas spring arm for my Eakins digital microscope. I also wanted the ability to use standard…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
flat in-view rotating XY table for microscope SMD assembly and inspection Just 26 mm high but featuring 2 axis plus rotation. Use either stick for rotation around center axis. Twist the sticks to move the XY table with gear-reduced…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
In education you often had to clean a lot of microscope slides after a lesson. So its good using a dishwasher for that. A holder for 30 slides make it easier. USE PETG, because the temperature in a dishwasher is higher than 60°C!
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for PETGSource material: PET
Wikipedia: A Pinard horn is a tool used to listen the heart rate of a fetus during pregnancy. This is my second attempt (the first one was bigger and didn't work) and this is fully functional although some times it's hard to find the…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
There are great tripod screw mounts for cameras. There are interesting solutions for having overhead camera mounts for youtubers and twitch users. So let's use these solutions to free up space for soldering with the Andonstar microscope.…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Meant to be used with Tripod Mounting System , this holder gives you a safe place to keep all your lens covers when not on the telescope. Socket head screws feed through the front of the holder and lead out the back. Holder mounts to one…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Buy attaching a cheap $15 microscope to your phone, you can take amazing microscopic images and videos and share what you see with those around you. This attachment prints with no supports in two pieces which are then glued together. Once…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Case design to hold one 2-in eyepiece and four 1.25-in eyepieces. In my case, I have the Svbony 34mm 72° (2in), 20mm, 15mm, 9mm, and 6mm 68° eyepieces. The case is sloped to both support the taller 2-in eyepiece while also allowing easier…
Print approx. €15.75–€19.25 excl. taxPreliminary estimate for PETGSource material: PET
Die Teleskopringe sind zweiteilig und gedacht für Teleskope mit 200mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder kleiner und alle Gewinde M5…
Print approx. €8.77–€10.72 excl. taxPreliminary estimate for one variant
Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version. I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed. The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Designed this LED light to slide into the phone illumination module for the GALILEO Modular Microscope. All of the parts were printed in Hatchbox PLA with the exception of the strain relief grommet which is PETG. Note that the grommet…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I split the two contrast color rings so that you can use manual color changes for only 4 layers on each side. I'll attach my modified gcode along with 3mf and f3d. Note, 4 layers assumes 0.2mm layer height e.g. 0.8 mm. Attribution for CAD…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
The metal base plate on my Andonstar 207 was a little small, so I printed this extension to give me more room. It looks like it might fit other Andonstar models, but don't quote me on it. The fit could be a bit tighter, but it's been good…
Print approx. €6.30–€7.70 excl. taxPreliminary estimate for one variant
Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
The M2.5 screws now screw directly into the mount/adapter. Be careful about how many times you attach and detach the camera from the mount/adapter. It's not designed for that. Attaching it once should suffice. After that, you risk…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
The Delta-P Duct is an awesome concept. While there are already designs for fitting an endoscope camera, I wanted a system where the camera could be easily removed without disturbing the extruder cooling and restore the excellent view of…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
To assemble this mount, you will need five M3 screws . I recommend printing this with ASA. It is designed with a slightly higher profile, allowing you to use iron sights even with larger scopes. It locks onto the Kar98k using a 3D-printed…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for one variant
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Hi, Here an enhancement of the camera mount I designed for my 3D printer Creality Ender 3 S1. The previous version had some weakness, like the camera support, too thin, and a bad angle view. I operate a new design with a better support…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Locks the probe in the 10x position saving the headache of having to constantly check.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
⚠⚠ DON'T LOOK AT THE SUN WITH A TELESCOPE ⚠⚠ I can't stress that enough. Serious damage when used improperly. This was designed to go on top of the Hadley Telescope . This adapter specifically fits the SVBONY SV229 Solar Filter . It needs…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for one variant
DanAndersen remixed Arie Kanarie design for this fantastic mount but I'm already using a VESA adapter for the microscope and wanted to use the flexible LED lights with my metal soldering station. I added a few more steps to his Fusion…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
These are two different designs that are meant to go over the standard knobs used on Losmandy telescope mounts (i.e. G11, G8, etc.) in order to help with comfort and leverage, particularly during loosening. Especially during the winter…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Magnetic rifle scope with fron 50 mm and rear 44 mm diameter. You need 12 pices of gagnet 6x2mm (Aliexpress) - https://www.aliexpress.com/item/1005005884332595.html?spm=a2g0o.order_list.order_list_main.15.8b511802zbc0Fz Scope is Meopta…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Grommet with tapered bore to fit Jiusion USB microscope from Amazon. Intended to relieve focused pressure on microscope from two set screws. Improves stability during focusing.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
We bought this microscope 8years ago, it came with a poor ccd with VCR connector. Since the original shop is closed now, I don't know the correct type lens to replace the CCD lens for camera. The most simply way is to add an adaptor with…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Replacements for the screw covers on the handle of TEK314 storage oscilloscopes.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…
Print approx. €5.40–€6.60 excl. taxPreliminary estimate for one variant
The outer ring of a friends telescope golf ball collector broke off. I designed and printed a suitable spare part, so I could repair the collector. 0. Preparation To take off the original outer ring from the telescope rod, you carefully…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
This is an add on slide-in/out stage for the Universal Microscope Stage (USM) that includes a hole for light and three smaller holes for the attachment of a stage caliper. LED light “HeHe” Traffic safety Walking LED (Amazon) ""Pomya"…
Print approx. €6.96–€8.50 excl. taxPreliminary estimate for one variant
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Originally remixed this model for my MK3 to add a Davinci inspired Vitruvian Man. Now added mount for the MK4 X-axis thanks to the work from Jose Cruz on his remix of the original gryoscope found here.…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
I needed something to protect my solar filter… so I designed a rudimentary one in Prusa Slicer. It’s not great but it works for me. The slicer wouldn't export a .stl file for the bottom piece, so I only have the bgcode file for that for…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for PETGSource material: PET
The Leica M320 surgical microscope is state-of-the-art technology. Nevertheless, hazards can arise during operation.
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Holder for Trinocular Mircoscope Camera Remote. Microscope in Pictures: https://de.aliexpress.com/item/1005004036342281.html Since all of these $700 China microscopes have the same base, the model should be compatible with many microscopes.
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
The leg combination part of my sons telescope broke and I made this part to replace it. During the print it pauses to be able to drop the nut in. Just remove the support structure with pincers and drop the nut in and continue to print.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant
Zeiss LRP S3 4-25x50 Scope Parallax Wheel. Hardware required: (1) M3 x 5 mm button head screw.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Update 29.05.2023 . I do not use this design anymore because I made a superior model shortly ago. I recommend not using this model any longer and suggest you use my best nozzle cam (and still the most affordable solution) . Problems with…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
##WTF !!This is a Option of the Following Stands. (My prebious Item) https://www.printables.com/model/873777-stand-for-apexel-800x-zoom-digital-scope Please make it Wall = Over 1 < Infill =Over 20%
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
vnitřní průměr 77,3 mm stěna 2,5 mm plná vnější průměr 82,3 mm hloubka uvnitř 15 mm dno 3 mm celková výška 18 mm
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
That's a very simple model of a solar cover for my telescope's finderscope. External diameter of the finderscope is about 57,5mm, so this design is rather tight fit, but it's quite easy to put on thanks to small internal curbs - visible…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Makes work easier when I park my LOMO stereo microscope when doing smd repairs with different pcb height. This is because of the installed LED ring illuminator ring depth when I park the setup on the side of the bench while keeping the…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
This is an emergency fix; this part is not supposed to replace correct original manufacturer's part. Manufacturing instructions Material: ASA 3D Printer: Any FDM 3D printer capable printing ASA Slicer settings: no supports Post processing…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
This is a fidget gyroscope. It spins and doesn't have any pins so you can rotate it in any orientation Notes: The proportions change as the number of rings increases. The smaller the number of rings, the smaller (in height) I made the…
The Hubble space telescope , the largest single big metal tube currently in Earth orbit, has been gazing into the cosmos since 1990, taking some of the most influential photographs of our time. The first in a new series of model kit cards…
Official metric remix of Maff's amazing Netwonian reflector telescope nicknamed “Hadley” . Make sure you go and read his Printables post too, as well as the #hadley-instructions channel on his Discord server , as it includes some extra…
Looking for the perfect gift for a doctor, nurse, or medical student? This pen holder, shaped like a doctor's bust complete with a lab coat and stethoscope, is the ideal desk accessory to add a touch of professionalism and charm to any…
Model for broom handles from 18 to 26 mm with new system to avoid gear leakage. If you like it, a like would be appreciated Thanks.
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
Shock Cord Scope/Light Cover "by" Qwerm A shock cord retained cap for your light or scope based off of One Hundred Concept's ScopeCap/LightCap/ShockCollar. Included in the release are various sizes ranging from 30-70mm in 2mm increments…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…
This scope attachment allows you to shoot and record scope view simultaneously. It uses a semi-transparent mirror to send part of the light to the camera and the rest to the shooter's eye. The attachment is a modular design consisting of…
This is a 100% 3D printed phone holder for microscopes, designed to make capturing images and videos simple and precise. The mount allows smooth adjustment left, right, up, down, and forward and backward relative to the microscope lens,…
These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
EDIT 9/27/26: Added new, basic assembly instruction and updated (incomplete BoM) EDIT 3-7-26: Uploaded files for the new, Linear Bearing 3D Printed Focuser! The focuser drawtube runs on two LWL7B Linear Bearings with a T5 Lead Screw for…
I liked the concept of Maff's Hadley telescope , but the design of the seemed a bit clunky. I started from scratch and re-designed every part to use metric screws, threaded inserts, and a cleaner, more cohesive design language. Read…
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.
A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
🇬🇧 The OST is the low-cost, open source version of the commercial Smallest. A great way to discover the concept, but the version available on my shop offers better durability and more features. 🇫🇷 Cette version open source OST est la…
