Search results: splitter

Sort order

844 models

P
PrintablesZzoyozZ

Bowden Y-Splitter for Bambu Lab X1

Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…

Downloads
17,345
Likes
1,709
Rating
4.77
P
PrintablesEd Johnson

Bambu AMS No-Catch Y-Splitter PC4-M10

Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…

Downloads
14,057
Likes
2,732
Rating
4.91
P
PrintablesBrandon Raineri

Bambu Lab Over-Engineered Y-Splitter

Please download from Makerworld. This STL is not the latest revision.

Downloads
10,219
Likes
1,414
Rating
4.83
P
PrintablesLayersFarm

Bambu Lab Y-Splitter with PC4-M10 pneumatic connector and magnets

Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…

Downloads
10,188
Likes
2,190
Rating
4.85
P
PrintablesHarald Geisler

Y-Splitter Bambu Lab

A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to…

Downloads
8,529
Likes
1,193
Rating
4.86
P
PrintablesBuildX

#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…

Downloads
6,624
Likes
1,501
Rating
4.94
P
PrintablesEd Johnson

Y-Splitter for the Bambu Lab X1C AMS

Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…

Downloads
5,037
Likes
600
Rating
4.81

AC Power Splitter

AC Power Cord splitter (Kettle Cord) mk1 This was part of my 3D Printer enclosure projects to tidy up the cables on the back of the enclosure. Uses a standard ‘chocolate bar’ electrical connector This design comes with: The body of the…

Downloads
4,124
Likes
44
Rating
0
P
PrintablesKGRIST65

Bambu Lab "Y" Splitter Fitting Insert

This Fitting Insert is inserted into the threaded end of the “Y” Adapter PC4-M10 PTFE Connector to reduce the chances of the filament getting stuck as the filament exits the “Y” Adapter and goes to the printer. I printed @EdJohnson's…

Downloads
3,515
Likes
331
Rating
5
P
PrintablesAlex Maxe

Printable Release Ring for Bambu Lab Over-Engineered Y-Splitter

These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…

Downloads
3,254
Likes
333
Rating
4.85
P
PrintablesZzoyozZ

Bowden Tube Y-Splitter with PC4-M6 Connections

Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…

Downloads
3,233
Likes
436
Rating
4.82
P
Printableskjbturok

Bambu Lab X1 Y-Splitter with inlet for pneumatic connector G1/8" (M10).

Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…

Downloads
2,786
Likes
284
Rating
4.74
P
PrintablesLaisch

PTFE Bowden Y Splitter (3 way)

I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…

Downloads
2,745
Likes
586
Rating
4.84
P
PrintablesBlind Maker

Wye Another Y-Splitter?

Wye? Y? Thinking they really should be wye since that's what they are called in plumbing. ...ANYWAY... Why another wye? Obviously because none quite worked for me. I had issues with friction and really bad luck with crappy imported…

Downloads
2,593
Likes
426
Rating
4.96
P
PrintablesMax

Vacuum hose Y connector - splitter for all common sizes

Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…

Downloads
2,296
Likes
303
Rating
5
P
PrintablesMax

Tube Y connector / splitter fittings 4mm-24mm sizes

Tube Y fittings for connecting different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be helpful for the smaller sizes.…

Downloads
2,242
Likes
251
Rating
5
P

3D Printed Circuit Splitter and Flow Restriction Devices for Multiple Patient Lung Ventilation

THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…

Downloads
2,000
Likes
50
Rating
0
P
Printablesrtj

Filament Splitter for Bambu X1C UPDATED

Bambu Feed Splitter UPDATE Purpose Many versions of these are available on the site. They attempt to solve a basic problem when dealing with the AMS. There are filaments that will not a few the AMS for a few reasons. This means that you…

Downloads
1,966
Likes
285
Rating
4.83
P
PrintablesAsdfg

Y-Splitter for BambuLab AMS

Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in. Uses 3x PC4-M6 which can be ordered of Amazon of Ebay…

Downloads
1,630
Likes
205
Rating
4.81
P
PrintablesOurAngryBadger

Instant Y-Splitter for Bambu AMS X1C P1S P1P

I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…

Downloads
1,624
Likes
158
Rating
4.9
P
PrintablesAG

Creality K2 Plus CFS Y Splitter

I use JDJDJD's excellent Smoothy Y-splitter for Bambu's AMS on my P1S and tuned it for my newly arrived K2 Plus. Much of the instructions are provided by him, with thanks. You will need 3 x PC4-M10 ‘black’ connectors which screw into the…

Downloads
1,490
Likes
166
Rating
4.6
P
PrintablesJonas Daehnert

Quick-Lock Y-Splitter

About the Splitter: Most Y-splitters are printed vertically, which can cause unwanted filament friction inside the part. To solve that, I designed the Quick-Lock Y-Splitter . Thanks to its horizontal print orientation , the filament…

Downloads
1,463
Likes
467
Rating
4.86
P
PrintablesGentleDesign

Pill Splitter – Hinged Tablet Cutter

A compact, 3D-printable pill splitter designed for convenient tablet splitting. The hinged design allows easy operation, while the recessed cutting area helps position the tablet. The model folds into a compact shape for easy storage and…

Downloads
1,455
Likes
493
Rating
4
P
Printablesenque

Y-Splitter for the Bambu Lab X1C AMS

Remix of @EdJohnson 's design, with the following changes in order to avoid snags; AMS and Spool entry PC4-M10 connector threads previously did not bottom out as the outlet port did, so made all PC4-M10 entry threads bottom out (metal nut…

Downloads
1,293
Likes
179
Rating
5
P
Printablesjazzychad

4in (4 inch) duct splitter

This is a 4 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed. See also the Endcap model here: https://www.printables.com/model/637194-4in-4-inch-duct-splitter-endcap Source document:…

Downloads
1,117
Likes
143
Rating
5
P
Printablesmaxiangelo

Simple Bambu Lab Y-Splitter with PC4-M10 pneumatic connector

A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.

Downloads
1,060
Likes
102
Rating
4.88
P
PrintablesMartinWAF

Mistsplitter

Es ist ein Modell nach einem Schwertes aus Genshin Inpact. Das 3D Modell würde für ein Cosplay nach Bildern erstellt. Die Einzelteile passen auf eine Druckfläche von 270x200. Die Gesamtdatei kann aber auch selber in Teile zerlegt werden…

Downloads
1,032
Likes
217
Rating
5
P
PrintablesSANAIR

Remix Y-Splitter v2_M10x1_PushFit

With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe. I use…

Downloads
1,027
Likes
106
Rating
4.47
P
Printablesice987

Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…

Downloads
1,012
Likes
324
Rating
4.86
P
PrintablesEsoterical

EBB36 JST Splitter for dual part cooling fans

This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…

Downloads
908
Likes
223
Rating
5

Pill Snapper / Splitter

Are you breaking your fingers trying to snap those tiny pills? And the cutters with the blade send them FLYING! This small pill snapper gives you the right angle and force to snap those pills with ease! And it fits in most prescription…

Downloads
869
Likes
95
Rating
4.67
P
Printablesz3d

Improved Y-Splitter for the Bambu X1 Carbon AMS

Added a very gentle 75 degree internal chamfer (see images) to help with filament getting stuck when loading, which happened to me every time with the original. There is still about 0.5mm of flat for the ptfe tube to square up against,…

Downloads
859
Likes
122
Rating
5
P
Printablesshoooo

2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid)

Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…

Downloads
851
Likes
161
Rating
4.75
P
PrintablesGoodHope

Bowden Y-splitter for Qidi Box (AMS) , PC4-M6

I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…

Downloads
849
Likes
114
Rating
4.85
P
PrintablesKaminoKGY

8 colors on Anycubic Kobra 3 Combo Splitter for 8 spools with 2 Ace Pro - No support required

Please give it a 💖 if you like it 🥰 🪧 My Kobra 3 slicer profile 👉 https://www.printables.com/model/1019343-anycubic-kobra-3-combo-slicer-profiles-for-anycubi You can get a second Ace Pro there: on Geekbuying 👉 https://kgy.yt/ganyacepr on…

Downloads
848
Likes
124
Rating
1
P
Printableswaterl0u3d

Bambu Lab Y-Splitter

Materials: 3 x PC4-M10 pneumatic connector, inner diameter: 4 mm 2 x M3 6mm Settings: Support BUILD PLATE ONLY Brim-object gap 0.3mm

Downloads
816
Likes
79
Rating
4.5
P
PrintablesRowaller

Juxtaposed Y-splitter for BambuLab P1P / X1C

Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…

Downloads
807
Likes
110
Rating
4.94
P
PrintablesTHop3D

Cigarette Splitter 4

Cigarette Splitter that makes it possible to smoke 4 Cigarettes at once. Smoking is incredibly harmful to your health and can lead to serious and life-threatening conditions. Avoid smoking at all costs. If anyone has any questions please…

Downloads
797
Likes
62
Rating
5
P
Printablespixelschubbser

Bambu Lab A1 / A1 Mini Multiple Tube Splitter AMS Lite

This is a Multiple Tube Splitter for Bambu Lab A1 and A1 Mini with AMS Lite. Just insert the 4 PTFE into the splitter. You dont need an extra PTFE extension underneath to the genuine hub. The filament at the two slots behind of it (Slot…

Downloads
797
Likes
105
Rating
4.2
P
PrintablesZzoyozZ

Clean Bowden Y-Splitter

Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's. Screw the small part to the printer (see picture), remove existing screw first. Remove the coupler from the printer. Screw in…

Downloads
767
Likes
92
Rating
4.63
P
PrintablesMOSTAR

PTFE Tube Y-Splitter With Strong Magnets

Improved PTFE tube grip for more secured grip. Added two hidden very strong Prusa magnets for easy and quick mount. Changed to M3x8mm bolts without any inserts. To assemble and mount PTFE Tube Y-Splitter you will need the following*: M3x8…

Downloads
759
Likes
69
Rating
4.54
P

Intex Pool 32mm Splitter - 1 to 2

Just mirrored the 32mm connector instead of the garden hose. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Notes: Just mirrored the 32mm…

Downloads
748
Likes
104
Rating
4.5
P
PrintablesWorti

Filament sensor relocater + Y-Splitter in once for Anycubic Kobra S1

I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1. You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could…

Downloads
745
Likes
93
Rating
5
P
Printablesyoni

4 to 1 bowden/ptfe tube joiner/splitter - Straight Top

As the name. You need 5 JP4-01 or PC4-M10 to use this. The JP4-01 has shallow cut so it's preferred to minimize the filaments getting stuck.

Downloads
712
Likes
81
Rating
4.67
P
PrintablesEd Johnson

PTFE Cap for Bambu Lab AMS Y-Splitter

I created this simple PTFE cap in response to a question about air leaking into the AMS unit from my y-splitter ( Y-Splitter for the Bambu Lab X1C AMS ). While I haven't had any issues, it does raise a valid point if you are in a high…

Downloads
695
Likes
90
Rating
5
P
Printablesdoesntfearzeus

Y-Splitter Bambu Lab for side mounted spool

The original model was great, but designed for rear mounted spools. I rotated the Y part about 85 degrees to make this side mounted version. I only converted the Y_Splitter_PC4-M10_V2_rw.stl. Requirements: 3x PC4-M10 pneumatic connector,…

Downloads
694
Likes
86
Rating
5
P
PrintablesK3DD

Bowden Tube Y Splitter remix

Habe hinten 3 Aussparungen für Magnete 6x3mm hinzugefügt. Ausserdem die Bowden-Eingänge mit “AMS” und "EXT" beschriftet. Das ganze ist MMU und AMS tauglich. Kann also als Multimaterial-STL gedruckt werden. Remix von…

Downloads
687
Likes
46
Rating
5
P
PrintablesChristos

Bambu Lab X1 Y-Splitter (8X3mm Magnets)

I remix the model from LayersFarm https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec/files in order to fit my 8x3mm magnets.

Downloads
684
Likes
95
Rating
4.8
P
Printablesstefi01

MC4 Splitter Tool

just a simple MC4 disconect tool Category: Tools

Downloads
666
Likes
28
Rating
5
P
PrintablesAlexMu

Bambu Lab reliable Y-Splitter 1/8" fitting

I printed with 0,4mm nozzle an 0,12mm layer height. Threads turn out nice. If want to do it even better adapt the layer height at the threaded area to 0,08mm. But as told it works nice with 0,12 as well. Hole for screw is 3D print…

Downloads
661
Likes
73
Rating
4.91
P
PrintablesKalleKnall

Print Fan "Flowsplitter" MK3 / MK3s / MK3s+ (and many other printers)

Testing ongoing ! Experimental ! Centrifugal fans have an uneven air flow at the outlet opening. The original and various other print fans therefore have different air flows on the left and the right coolig outlets. To counteract this,…

Downloads
639
Likes
140
Rating
4.63
P
PrintablesCutMaster

Filament Splitter for Bambu X1C UPDATED - REMIX

It's the only one I've found on this site that's really compatible with my bambulab X1C and above all that doesn't jam when the AMS changes filament, which unfortunately many others did. I lengthened the upper part a bit and added 2 holes…

Downloads
626
Likes
57
Rating
4
P
PrintablesInterlinkKnight

Y Splitter for Bambu Lab

This allows using an external filament when having an AMS. The difference between this one and the other ones is that it allows a smooth transition to prevent getting stuck (which happened with other models) and it's as short as possible.…

Downloads
617
Likes
52
Rating
5
P
PrintablesJaco van Zweel

Very Easy Y-Splitter

UPDATE: Now includes files for M3 with threaded inserts, based on community feedback :) I saw some posts online about printed Y-splitters being unreliable. Thought I'd design my own because, why not? This model does not require any tube…

Downloads
601
Likes
91
Rating
4.29
P
PrintablesWill.S

Improved Y Splitter / Connector for Bambu Lab AMS X1C P1S P1P

***0.12mm layer height required*** After having problems with filament hanging up where it exits the splitter I wanted a design where the PC4-M10 connector could sit as flush as possible with the bottom of the hole. Most designs I've seen…

Downloads
600
Likes
50
Rating
5
P
PrintablesNelisW

Drip/micro-spray irrigation splitter with Gardena connector

Drip/micro-spray splitter connecting to Gardena hose pipe. The requirement was to water bonsai trees, using micro-spray heads on flexible pipes, from a ten-way splitter connected to a hosepipe with Gardena fittings. The final design does…

Downloads
580
Likes
107
Rating
5
P
PrintablesReamo

Bambu Lab Filament Y-Splitter

In printing with Polycarbonate I decided it was time to create a Y-Splitter so I can leave the PC spool in the external drying box. This way the humidity level will stay well below 20% and I won’t have to plan so far ahead to re-dry each…

Downloads
579
Likes
62
Rating
3.67
P
Printablesueda

Garden Hose coupler/splitter

A splitter for garden hoses. The required O-Ring can also be found with my other models. Happy watering :)

Downloads
570
Likes
171
Rating
0
P
PrintablesRestoreDoctor

Bambu Lab X1 Y-Splitter for PC4-M5 pneumatic fittings

This is a remix from the Y-Splitter for Bambu Lab X1. add 10mm Brim no Support needed print with ABS or PETG the O-ring of the fittings must be removed…

Downloads
569
Likes
58
Rating
5
P

Splitter Diffuser Tunnel for Race Cars

Splitter Diffuser Tunnel for Race Cars splitters etc. Quite large, you may want to scale it down depending on your application. Print Settings Rafts:No Supports:No Resolution:0.2 Infill:100%

Downloads
544
Likes
25
Rating
0
P
PrintablesMichael Schmitz

filament splitter 4-way

This is a work in progress, 4-way filament splitter, not yet tested. Threads are for M10x1 couplers, PTFE tubes with OD4/ID3mm. Outlet below has a so called sacrificial layer, to print without supports. Only 0.2mm thick, it can easily…

Downloads
502
Likes
53
Rating
5
P
PrintablesSHaDoW6

PTFE Y-Splitter

Hey everyone, I made a simple PTFE Y-Splitter for my Creality K2 Plus and the CFS. This means you won’t have to switch tubes between the CFS and the Spool Holder anymore. Feel free to use it if you need it, and have fun! You will need - 6…

Downloads
500
Likes
86
Rating
5
P
PrintablesV-Tach

EKG cable splitter remix

This is a remix of JW's ECG Cable Splitter. I found the splitter would come apart more frequently than I'd like so I made it clip together. The clip is best printed on its side with supports enabled to increase durability. Printed on a…

Downloads
489
Likes
63
Rating
5
P
Printables3DCoded

4-way Y Splitter with ECAS04

This is a simple 4-way Y splitter designed for use with the 3MS Modular Multimaterial System . This splitter design uses 5x ECAS04 fittings and is intended to be printed at a 0.2mm layer height with PLA or ABS/ASA (PETG is too soft).…

Downloads
485
Likes
50
Rating
4.33
P
PrintablesMediaMan3D

Easy Y-Splitter - Remix

Remixed to use more common M3 screws and M3 Threaded inserts. Does not need supports. Use six M3 by 6mm Hex or Button head screws and six M3 4.6mm OD by 4mm length threaded inserts. UPDATE 1-7-2023: Added two back versions with holes for…

Downloads
477
Likes
79
Rating
4.5

Powercon / Speakon / XLR / ??? Splitter box

An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…

Downloads
468
Likes
43
Rating
5
P
PrintablesRyper3D

Mini Splitter for MMU2+1s mod

This is our new MINI splitter for the mod MMU2+1s. Recommended print settings: Material: PLA… but recommended PETG or ASA/ABS or resin 0.2 mm layer height QUALITY preset, 3 perimeters Infill: 20% GRID Position: splitter filament entry on…

Downloads
467
Likes
55
Rating
5
P
PrintablesJoesTinman

Y-Splitter with wider entry for PC4-M10 Push-fit

I tried about 5 different version of the Y-splitter but the filament kept snagging on the edges of the entry of the tube. Finally decided to create my own version. This version takes into account the wider 2.5mm inner diameter of the…

Downloads
456
Likes
32
Rating
5
P
PrintablesD00M

Y-Splitter Exhaust Duct Valve 125mm

Exhaust duct for my resin and cnc enclosure. Needed a solution to split in-line 125mm fan to both so I came up this this. Each inlet has a check valve with a lever. OD: 129mm ID:123mm Parts Needed: 8mm rod Installation Instructions: Print…

Downloads
454
Likes
70
Rating
5
P
PrintablesRyper3D

Mini Splitter v3 for MMU2+1s

[EN] Improved v3 MINI splitter for the mod MMU2+1s: use of ECAS04 PTFE connectors ( https://s.click.aliexpress.com/e/_v0glA2 ) improved filament path reduces PTFE angle for less movement stress easy print using FDM (ASA,ABS,PETG,PLA) or…

Downloads
450
Likes
52
Rating
5
P
PrintablesAperacing

Bambu Lab X-1_Y-Splitter_ECAS04 Bowden collets

I Remixed the Y-Splitter to use the Bowden Collets leftover from my ERCF build. I Printed this one on my Voron 2.4 (Still Waiting on the X-1) in KVP ABS with the single end on the build surface. I did use painted support on the interior…

Downloads
449
Likes
66
Rating
5
P
PrintablesRob Kenny

Y splitter Ball Valve

Remix to allow switching vacuum between 2 tools. Switch:: path 1 - off - path 2 Scale to 85.5% for fitting to irish std 40mm waste pipe - use M3 instead of M4 fittings. Assembly Note: ball is not reversible - placement will align to…

Downloads
446
Likes
72
Rating
5

Bambuab Y-Splitter AMS Auto Close Switch

Printed using a tree support. Wiring was done as follows. Cut the red line from the 4pin cable and connect it to the COM and N.C of the limit switch respectively. The AMS will switch off automatically when you insert external filament.…

Downloads
443
Likes
158
Rating
5
P
PrintablesBrodaag

Y-Splitter Exhaust Duct Valve 4 Inch

Exhaust duct for my Elegoo Centuari Carbon and painting booth. Needed a solution to split in-line 4" fan to both so I remixed this very good design created by @DOOM. Each inlet has a check valve with a lever. OD: 3.8"/96.4mm Parts Needed:…

Downloads
441
Likes
55
Rating
5
P
Printablesflackenstein

Yet another Bambu Labs X1 Filament Splitter

This is yet another Bambu Labs X1 filament splitter supporting external filament source and AMS without requiring the ptfe tube to be removed from the back of the X1. Had issues with other splitters so I designed this one to allow for…

Downloads
437
Likes
79
Rating
0
P
PrintablesHaemophilic

Bambu Lab Extra-Over-Engineered Y-Splitter

Based on the Bambu Lab Over-Engineered Y-Splitter version 2, I modified the filament entry side for a smooth filament entry and do not catch up due to the gap between the PTFE tube and the entry. In the picture, on left is the original…

Downloads
421
Likes
61
Rating
4.33
P
Printablesmartyx

Watering (irrigation) system 20-way splitter

20-way splitter for DIY home automated irrigation system Designed for: 1x input hose 8mm (inner diameter) 20x output hoses 4mm (inner diameter)

Downloads
420
Likes
157
Rating
0
P
Printableshachleitner

Core One MMU3 Y-Splitter using E3D V6 Collets mountable on Swing Arm

Core One MMU3 Y-Splitter using E3D V6 Collets, mountable on the Swing Arm. There is also a Y-Splitter with Bowden collets available if no E3D V6 collets are available. Changes 27. October 2025: Removed old files (obsolete), added step…

Downloads
418
Likes
107
Rating
4.93
P
PrintablesOmar

Bambu Lab Y-Splitter (10x2) v2.1

I modified the original design to suite my magnets with 10x2 mm size please follow the original poster instructions

Downloads
414
Likes
55
Rating
4.67
P
Printablesslipangle28

2.5" Shop-vac Hose Splitter - 2 female 1 male

I designed this splitter to work with 2.5" standard shop-vac friction-fit hoses. This has one female inlet and one each male and female outlet. This specifically fits the configuration I have for my miter saw dust collection system.…

Downloads
411
Likes
49
Rating
5
P
PrintablesZzoyozZ

Bowden Tube Y-Splitter with PC4-M6 Connections and Attachment

Print with ABS or PETG with brim and no support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. Don't use too much force when screwing in the PC4-M6's. Fully push the bowden tubes through…

Downloads
409
Likes
29
Rating
4.67
P
PrintablesHuDSoN

Bambu PTFE Y Splitter - No PTFE fittings required

I was using this Y splitter as was very simple Bowden Y-Splitter for Bambu Lab X1 by ZzoyozZ | Download free STL model | Printables.com However, as it was free to move around, filament would catch and kind of ping within the tube system.…

Downloads
393
Likes
20
Rating
0
P
PrintablesNC Fabrikation

Xtreme Radius PTFE Tube Splitter

I found that most PTFE splitter models available use S-shaped and/or tight radius curves. These work fine for normal unfilled filaments, but I print a lot of glass fiber nylon and I've found that those designs cause a lot of problematic…

Downloads
392
Likes
88
Rating
4.83
P
Printables3D KIMBA

PolyDryer Splitter Mod – Dry Two Spools at Once

PolyDryer Splitter Mod – Dry Two Spools at Once Thanks to this mod, you can dry two spools at the same time using a single PolyDryer unit. This design is ideal for users who own only one dryer and want to optimize their drying process,…

Downloads
387
Likes
243
Rating
5
P
PrintablesNaiki

Bambu Lab Y-Splitter with PC4-M6 pneumatic connector and magnets

I remixed the model from LayersFarm to fit a M6 pneumatic connector instead of M10. It's the model for 5x5mm magnets .

Downloads
384
Likes
32
Rating
5
P
Printablesyoni

4 to 1 bowden/ptfe tube joiner/splitter

As the name. Made for BAFS v.01, but can be used for other similar use. You need 5 PC4-M10 to use this. Inspired by other splitters: https://www.thingiverse.com/thing:2444687 https://www.thingiverse.com/thing:2867089…

Downloads
381
Likes
76
Rating
5
P
PrintablesAdam

Car Air Vent Extension Adapter and Splitter - Rear Facing Car Seats

Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…

Downloads
380
Likes
101
Rating
5
P
Printables3DPHUB.NET

4 inch duct splitter (wall mounted 2 to 1 collector)

Heavy duty wall mount solution to merge two 4in (100mm) ducts to one. Great for people with more than one 3D printer wanting to vent the fumes. Strong, secure fit I will be uploading more 4inch ducting parts soon LINKS TO THINGS YOU MIGHT…

Downloads
374
Likes
44
Rating
0
P
PrintablesScale_Precision

TT02 Front Splitter - Audi V8

This is a front splitter for the Tamiya TT02 Audi V8 RC car kit. This part has been designed to install into the existing lower bumper holes with two M3x20 machine screws, however M3x15 will also work without issue. Printed out of PLA or…

Downloads
373
Likes
37
Rating
0
P
PrintablesFPV Smitty

Another Bambu PTFE Splitter

A remix of ZzoyozZ's Y splitter. Put it in a box, added some 10x3mm magnets, stuck a logo on it. 01/26/23 Added one modded for 8x8mm magnets.

Downloads
372
Likes
38
Rating
5
P
PrintablesKarol

Filament Y-Splitter for Bambu Lab Printers with AMS (3 way)

This 3D print allows you to connect three filament sources to the printer, without the need to unfasten the PTFE tubes. You can connect e.g. AMS, a filament dryer and an external bobbin to the printer. Part designed for connectors with…

Downloads
370
Likes
46
Rating
4.5
P
Printablessh Chow

Bambu Lab P1P/X1 Y-Splitter with PC4-01 (PC4-10)pneumatic connector , 6*3 magnets and magnetic base

Remix : 1.logo X1 → P1P 2.improve filament plug phenomemon 3.add a magnetic base with 2 6*3 magnets BOM : 1.glue 2.6*3 magnets X7(N52 will be better) Print Material: PETG (optimal) - PLA (best) Layer height: 0.08mm (optimal) - 0.12mm…

Downloads
369
Likes
57
Rating
5
P
Printablesice987

Prusa CORE One/+ MMU3 Y-Splitter COLLET (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…

Downloads
363
Likes
77
Rating
4.91

Truma heater vent air splitter

For a 55 mm ID air outlet. You can connect a 22 mm OD hot air pipe to the four outlets and plug them in your wet shoes/boots . Test print with PETG, 0.25 mm layer with supports. It's possibly better to use ABS/ASA but I don't have this…

Downloads
363
Likes
35
Rating
0
P
PrintablesMIRCON

Y-splitter PC4-M10 flat curve V3 [Bambu Lab X1/ X1C]

New Y splitter PC4-M10 flat curve V3 ; perfect shape runs well / 2 X PC4-M10 (2X M3x10) Y splitter is awesome for changing filament to manual spools some of the PTFE tubing :)

Downloads
350
Likes
40
Rating
5
P
PrintablesDingus

Bambu Lab Y-Splitter with PC4-M6 pneumatic connector and 6x3mm magnets

Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.

Downloads
347
Likes
41
Rating
5
P
PrintablesKytor

Bambu X1C Over-Engineered Y-Pipe Splitter with Inlet Side PC4-M10 Push-Fit

Description: This Y-Pipe Splitter allows you to easily utilize both the Bambu Labs AMS and the standard spool without PTFE tube disassembly. Background: Brandon's Over-Engineered Y-Splitter is fantastic, but the insert action on the inlet…

Downloads
345
Likes
53
Rating
5
P
PrintablesPsytropomorph

Low-Friction Bambu P1S Y-Splitter - No couplers, no magnets

A small adaptation of the great low-friction bowden/PTFE-tube Y splitter by BlindMaker . This remix adds an M3 slot flange that allows to fix the splitter on the rear side of the Bambu P1S (the X1C should work as well), using an M3*10…

Downloads
338
Likes
45
Rating
5
P
Printablessstteevvee

Dewalt Airlock to two vacuum hose Y splitter

Make your own DWV9470-XJ ! Print this, and then add your own hose and air-lock hose adapters . Print with the single port on the print bed, and the two arms of the “Y” facing up. Would be best to add brim for extra bed adhesion. Can be…

Downloads
334
Likes
49
Rating
5
P
PrintablesPetehagoras

Core One MMU3 Y-Splitter for collets

I frequently change between MMU use and special materials, or different spool sizes in single mode use (with larger spool holder on the side). With this splitter I just activate / deactivate the MMU3 in the printer menu, and can feed via…

Downloads
329
Likes
87
Rating
5