Search results: sure

Sort order

12,658 models

Prusa Enclosure V2 - MMU2S

Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…

Downloads
50,179
Likes
4,044
Rating
4.75
P
PrintablesDom Cis

Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research

Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…

Downloads
49,605
Likes
3,822
Rating
4.7
P
PrintablesPrusa Research

Enclosure Printable Parts

All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…

Downloads
21,101
Likes
1,611
Rating
4.85
P
PrintablesPrusa Research

Transport handle for Original Prusa Enclosure

Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…

Downloads
17,782
Likes
1,100
Rating
4.91
P
PrintablesPrusa Research

Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…

Downloads
10,227
Likes
1,063
Rating
4.8
P
PrintablesJoe

Radius measurement tool and Cylinder center finder / center marker

This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…

Downloads
8,276
Likes
2,792
Rating
4.87

Prusa Printer Enclosure v2 – with MMU2S support - 0.125 inches acrylic version

**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…

Downloads
4,587
Likes
437
Rating
4.74
P
PrintablesMakerT

One-Hand Ratchet Lace Closure

Update : Design knob added for small model Tested M3 base which can be fix with M3 countersunk 6/8mm without feeling on foot. One-Hand Ratchet Lace Closure Traditional shoelaces often require two hands, finger dexterity and the ability to…

Downloads
2,855
Likes
2,128
Rating
5
P
PrintablesTechNerd

AirManagerV2 recirculating air filter for 3d printing enclosure

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…

Downloads
2,702
Likes
1,501
Rating
4.79
P
Printables3D-Druckfactory

Sheet holder for original Prusa Enclosure with Tool Holder

Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…

Downloads
1,965
Likes
412
Rating
4.94

Metric measurement keychain - 5 tools

Easy to get on the ring but won't fall off! Gcode prints one-at-a-time for less stringing!

Downloads
1,303
Likes
425
Rating
4.77
P
PrintablesBen Levi - BLV

BLV Enclosure - BETA

BLV Enclosure For MK3S+ / Prusa Mini - (Work in progress) The BLV Enclosure is a universal enclosure designed entirely for 3D printers. Designed to be quick and easy to assemble, practical, modular, customizable, and most importantly…

Downloads
1,257
Likes
288
Rating
3.5
P
Printablesfasteddy

Prusa LACK Enclosure Cable Passthrough

These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller outside of the Prusa LACK Enclosure V2. _lack_cable passthrough provides enough room for the power cables as well as a USB…

Downloads
1,236
Likes
143
Rating
4.96
P
PrintablesmoWerk

Pool & Hot Tub Filter Cartridge Cleaner | Gardena Pressure Nozzle | Compact Remix

Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…

Downloads
1,230
Likes
393
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design

This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…

Downloads
1,033
Likes
64
Rating
5
P
PrintablesDane Doghouse

Gridfinity Screw and Nut Measurement Tool

The Gridfinity Screw and Nut Measurement Tool is a must-have for any DIY enthusiast. This compact and durable tool is designed to accurately measure the size of screws and nuts, ensuring a perfect fit every time. With its easy-to-use…

Downloads
960
Likes
211
Rating
5
P

Fully Functional Apple Macintosh Plus in a 2/5-Scale Enclosure

A fully functional Apple Macintosh Plus in a 3D-printed 2/5-scale enclosure. It was printed on Prusa 3D MK3S printers with beige PLA filament. It runs on a Raspberry Pi 4B with Mini vMac, a Macintosh emulator. The “Files” section contains…

Downloads
769
Likes
96
Rating
0
P
PrintablesMultisystem

2021 (First Version) MiSTer Multisystem classic gaming console 3D Printed enclosure design

Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…

Downloads
755
Likes
30
Rating
5
P
PrintablesFAYRON

Original Prusa Enclosure 2Kg Spool Holder

A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…

Downloads
752
Likes
43
Rating
4.25
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Downloads
668
Likes
164
Rating
4.42
P
PrintablesMichaelQ

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

Downloads
656
Likes
228
Rating
4.98
P
PrintablesUko

Original Prusa Enclosure Double Sheet Holder (M3 Bolt Holes)

Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures

Downloads
587
Likes
191
Rating
4.95
P
PrintablesMS_D3sign

Enclosure Case for ESP32 2.8 inch Display (ESP32E) – Base + Lid (cheap yellow display)

Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…

Downloads
506
Likes
371
Rating
0
P
Printablesxro

Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE

This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…

Downloads
462
Likes
24
Rating
0
P
PrintablesPeter Farell

Mort from Madagascar - Draft Resurection

Another Lost in Drafts Resurrection. Print at your own risk. I have no idea why this was left in drafts. soo…. Mort from Madagascar

Downloads
455
Likes
70
Rating
4
P
PrintablesVisualReversal

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Downloads
418
Likes
102
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem V6x 2023 classic gaming console 3D Printed enclosure design

Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…

Downloads
418
Likes
36
Rating
5
P
PrintablesMorten R

NodeMCU ESP8266 Enclosure

Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…

Downloads
416
Likes
109
Rating
0
P
PrintablesXBurgy

Prusa Enclosure SideBox

CZ: Boční boxy na nářadí a příslušenství určené pro Originál Prusa Enclosure v kombinaci s tiskárnami Prusa MK3/MK3S/MK3S+. Pokud byste si chtěli modely upravit pro jiný typ tiskárny (například pro MK4), přiložil jsem i zdrojové soubory…

Downloads
394
Likes
108
Rating
4.75
P
PrintablesDaHouzKat

Original Prusa Enclosure Folding Door

Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…

Downloads
391
Likes
183
Rating
4.94
P
PrintablesCzechu

AIOC enclosure

Snap-fit enclosure by SP5CMD

Downloads
359
Likes
27
Rating
4.67
P
PrintablesPrusa.printer

PRUSA ENCLOSURE

Prusa enclosure Print resolution: 0.2mm Infill: 40%-70% Material: PET-G 6mm Plexiglas 1,2 m2, aluminium profile 20x20mm Supports: Yes ----------------------------------------------------------------- You'll need: Some PET-G filament 6mm…

Downloads
346
Likes
147
Rating
5
P
PrintablesHondzik

SureFlap tunnel extender

The original tunnel extension is obscenely expensive, but what do we have 3D printers for?! :D

Downloads
345
Likes
13
Rating
5
P
PrintablesF3DX

EAWONGEE 4000 high pressure washer gun

Wall bracket for spray nozzles of an EAWONGEE 4000 pressure washer gun Printed in PETG MK4 IS 0.2 Filling 15%

Downloads
333
Likes
64
Rating
5
P
PrintablesPincoyo

Measuring Spoon 5ml / Mesure 5 ml

This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…

Downloads
310
Likes
26
Rating
5
P
PrintablesSurfalex2000

Prusa XL series: Linear (Pressure) Advance Calibration Pyramid

ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…

Downloads
304
Likes
63
Rating
3
P
PrintablesThe Full Loaf

Tape Measure Clip for Inside Corners

This simple clip allows you to take accurate measurements of inside corners with a tape measure. No more guessing what the length is inside the bend! Just slide the clip up to the corner, pull the tape back and read where the edge lines…

Downloads
281
Likes
51
Rating
5
P
Printablesmrusk

High Performance Spool Holder for Prusa Lack Enclosure (up to 5kg Spools)

These new wheels for the original Prusa Lack Enclosure Spool Holder consist of 608 ball bearings (22 mm x 7 mm). Unlike other solutions here the filament spool rolls directly on the metal bearing surface minimizing noise, friction and…

Downloads
267
Likes
46
Rating
4.75
P
Printablestechis

Original Prusa Enclosure RepBox 2.5 Stand

This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…

Downloads
266
Likes
107
Rating
4.77
P
PrintablesCesare Monti

Prusa MK4 + Prusa Enclosure LCD Cables Cover

A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…

Downloads
257
Likes
62
Rating
4.71

Snapmaker 2.0 Touchpad Holder Enclosure Mount

Snapmaker 2.0 touchpad holder T-rail mount for original enclosure (A150/A250/A350) Allows you to place the control touchpad on the enclosure and move as needed. You will need: Original magnetic touchpad mount (remains unused after…

Downloads
257
Likes
40
Rating
5
P
PrintablesMike81622

Original Prusa Enclosure Spool Holder Distance Ring

When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…

Downloads
255
Likes
61
Rating
5
P
PrintablesUM3D

Prusa MK4 bin left for original Prusa enclosure

printed with: Prusament PLA Galaxy Black support necessary

Downloads
251
Likes
36
Rating
5
P
PrintablesBelFomDesign

Enclosure large 2kg spool holder - complete

Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…

Downloads
248
Likes
19
Rating
4.43
P
Printablesbb_prints

NodeMCU Enclosure

Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…

Downloads
239
Likes
21
Rating
4
P
PrintablesThibault Huguet

Brake pad wear measurement gauge

This set of gauge can be used to measure the thickness of the brake pad without removing them from the car. Gauge range is 1 to 8mm. Gauges can be hold together using a M4 screw + nut. Accuracy will depends on the printer but checking…

Downloads
238
Likes
41
Rating
5
P
Printablesn8many

Expandable Steel Sheet Holder Adapter for Lack Enclosure Drawers

Enjoying your Lack Enclosure Drawers from Jerrari, but also think Whity's Expandable Steel Sheet Holder looks real cool? Why choose one when you can have both! Prints as right and left brackets that mount to the A1/R1 versions of the…

Downloads
236
Likes
75
Rating
4.83
P
Printablesreiji

Prusa MINI Enclosure - External Display Housing

This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…

Downloads
232
Likes
109
Rating
5

Large Bin System for Original Enclosure & MK4 (Remix)

Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…

Downloads
226
Likes
64
Rating
4.8

SSD storage enclosure

A very simple SSD enclosure, I used it to chuck 8 disks into a server chassis without any hassle. It holds 10 SSDs of 7mm (¼") thickness. Print with 10% gyroid/grid infill, no support.

Downloads
221
Likes
16
Rating
0
P
PrintablesRon Harding

Drain Insert for Hornady Powder Measure

Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.

Downloads
218
Likes
33
Rating
5
P
Printablesgillis

Coffee measure Special 30ml

A 30ml measure that prints in 60 minuted on the mini and 64 minutes on the mk3s and thus can't participate in the competition :-)

Downloads
214
Likes
27
Rating
5
P
Printablesmikedmor

Original Prusa Enclosure Mesh Side Boxes for MK4

The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…

Downloads
213
Likes
41
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem2 Analogue FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…

Downloads
211
Likes
18
Rating
4

Treasure Chest Puzzle Box Remix Collection

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a collection of remixes…

Downloads
208
Likes
57
Rating
5
P
PrintablesDuBDzO

MK4S enclosure LCD mount

MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…

Downloads
205
Likes
33
Rating
3.75
P
PrintablesMadeinSwabia

NO MORE CABLE TIES: cable clips for wiring (e.g. Prusa enclosure) / Nie wieder Kabelbinder: Kabelschellen zum verkabeln

Hello friends from all over the world :) This is my first 3D-model on printables. A friend of mine has the original Prusa enclosure for his mk3s+. With the air filtration system and the LED strip, there are a few wires to guide along…

Downloads
197
Likes
58
Rating
5
P
PrintablesDavid D

Original Prusa Enclosure - Slider Lock Latch - Optimised for printing

Optimised version of the Slider Lock Latch by @MichaelQ - at least for me. The original version did not print well for me, probably cause I am using a slightly bigger nozzle, probably cause of other reasons. Anyways I also wanted to get…

Downloads
177
Likes
36
Rating
4.62
P
Printablesastrak

Lack enclosure : screwless tool holder

Design inspired from: https://www.thingiverse.com/thing:3267474 https://www.thingiverse.com/thing:4194407 This toolholder will directly attach around the lack leg. It is tight enought to stay in place (beware of scratches if you do not…

Downloads
162
Likes
30
Rating
0
P
PrintablesSpeakingOfBrad

Prusa MMU Enclosure Centering Part - Offset hole

Because the IKEA Lack table I used for my enclosure had already been assembled according to the IKEA assembly instructions, one of the holes in the centering part lines up with the hole already created by the double sided IKEA screws. So…

Downloads
158
Likes
34
Rating
5
P
PrintablesSimonp

Pressure Advance Linien 0.6 Nozzel MK3.5 und Input Shaper Test

Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…

Downloads
151
Likes
14
Rating
0
P
PrintablesDaHouzKat

Original Prusa Enclosure BTT PI TFT43 DIP Case

Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…

Downloads
147
Likes
42
Rating
0
P
PrintablesMBStudio

Minimalistic Ender 3 Enclosure for Bigtreetech SKR 1.4

A minimalistic electronics enclosure to put the BigtreeTech SKR 1.4 in a box at the front of an Creality Ender 3. Print instructions Design goals: Under 2 hr print. No supports. Viewable faces flat on the bed for best finish. Reuse of…

Downloads
144
Likes
12
Rating
0
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Downloads
144
Likes
55
Rating
0
P
PrintablesJeyMco

Prusa Mini Enclosure minimalistic + low budget (2mm plexiglass, M4)

My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…

Downloads
142
Likes
36
Rating
0
P
PrintablesTweedy

Enclosure 3” exhaust adapter with blast gate

I made mine in PETG but PLA will properly work also. 0.4 nozzle 0.2 layer height and 3 walls 40% grid infill. You will need M4 screws and Nuts.

Downloads
142
Likes
11
Rating
0
P
PrintablesNeva

HSW 5M measure tape holder

HSW 5M measure tape holder

Downloads
139
Likes
19
Rating
5
P
PrintablesJhannes

MK4 Display Adapter for the Ikea LACK Enclosure

You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure

Downloads
138
Likes
39
Rating
5
P
Printablesdl33t

Best 90 degree shallow heat bed cover for enclosure

I have seen several of these online but they don't fit my MK3S or they are really flimsy. I redesigned the idea to make it solid and fit the printer WITH THE ORIGINAL BOLTS INTACT. The prusa original cover ignores the bottom of the bed…

Downloads
136
Likes
15
Rating
3.8
P
Printablesapalrd

Simple 3D Printer Polycarbonate Enclosure Bracketry

This is my first attempt to build a 3D printer enclosure for my Prusa i3 MK3S. I used 0.060" (~1.5mm) 2'x2' (~610mm x 610mm) sheets of polycarbonate since I already had them from another project, but the polycarbonate is definitely not…

Downloads
135
Likes
38
Rating
0
P
PrintablesAnotherBrain

Filament Sensor Mount for Prusa Mini Enclosure

This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…

Downloads
134
Likes
33
Rating
4.89
P
Printablesdigbat

Lack Enclosure pass through holed bolt M10

Replacement for the default Lack enclosure top inserts for feeding filament into a Lack enclosure. No glue. Top should take a 4mm PTFE tube; bottom feeds 1.75 mm filament. Print instructions Print bolt shaft upright with a 0.4mm nozzle…

Downloads
127
Likes
14
Rating
5
P
PrintablesChristi Creates

Enclosure -IKEA Lack table foldable door

Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…

Downloads
123
Likes
62
Rating
5
P
PrintablesKayuHD

Shower pressure reducer | Druckminderer für Dusche

Ich wollte einfach ein bisschen mehr Wasser beim Duschen einsparen, daher habe ich mir im PrusaSlicer schnell einen simplen Druckminderer Ring erstellt und es klappte auf anhieb. Hab gleich mal drei verschiedene Lochdurchmesser (2, 3 und…

Downloads
120
Likes
13
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Cutout Saver

I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…

Downloads
118
Likes
37
Rating
5
P
Printableshectorri

Angled MMU bowden feeder PC4 M10 for Lack Enclosure and others

Compatible Angled feeder to feed five filaments of MMU with PCX M10 ptfe connector. Ideal to place on top of lack enclosure. I'm using with PC4-M10 connectors. Gcodes sliced with PrusaSlicer 2.4.1 version.

Downloads
116
Likes
50
Rating
5
P
PrintablesKopr

Prusa Enclosure Raspberry Pi Camera modification (with Software installer)

Useful links first Download PDF User Manual (Build guide) Github repository with the software installer Latest script release page Support thread on Prusa Forum Introduction This is a small modification of Prusa Enclosure which offers an…

Downloads
114
Likes
67
Rating
5
P
PrintablesBobtheGreatII

Raspberry Pi 3 & PiTFT 3.5" Rack Mountable Enclosure

This is a rack mountable enclosure for a Raspberry Pi 3 and the Adafruit PiTFT 3.5" screen. It consists of two parts that can be joined by just about any length of M4 screw. The holes on the bottom plate should be just small enough that…

Downloads
112
Likes
23
Rating
0
P
Printables3D Sourcerer

Daisy-Chain (DC) Universal 3D Printer Enclosure by 3D Sourcerer

In order to save space and expand your printer farm, we created an enclosure that can be daisy-chained together. When expanding your enclosure, you will first need to print all of the parts for the Standard Build. After printing the…

Downloads
110
Likes
20
Rating
5
P
Printableswilsondg

PrusaBox Enclosure - Buck Converter box with WAGO holders, RJ45 Network Port, Enlarged Rocker Switch Opening

Note: Please see my remix https://www.prusaprinters.org/prints/155787-prusabox-enclosure-enlarged-buck-converter-box-wit for an enlarged version of this same design to more easily fit all the wires with the relay in the lid. This is a…

Downloads
109
Likes
30
Rating
5
P
PrintablesGhezzz96

Raspberry Pi 2/3/3b+ case Creality Ender 3 LCD Enclosure

Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…

Downloads
109
Likes
9
Rating
5
P
PrintablesStopa

Prusa LACK enclosure embedded thermometer and dimmer

Modified LACK enclosure for Prusa MK3 with an embedded thermometer and LED dimmer. This remix modifies the top corner pieces so that a thermometer can be put inside the left leg piece and a LED dimmer inside the right leg piece. Warning:…

Downloads
104
Likes
28
Rating
0
P
PrintablesMichaelQ

Original Prusa Enclosure- Logitech C920 / C930 Mount

Model is designed to fit perfectly behind my "Original Prusa Enlosure - Raspberry Pi Mount with 7" Display" model. For the ball joint, you need: 2x M3 nut 1x M3 16 mm Allen head 1x M3 10 mm Allen head I am using a Logitech C930, it has a…

Downloads
104
Likes
26
Rating
5
P
Printablessamuel-t

[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)

I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…

Downloads
104
Likes
27
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Downloads
102
Likes
46
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem2 Digital FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Digital enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the included…

Downloads
96
Likes
6
Rating
0
P
PrintablesBM

Integrated Enclosure i3 MK3S (heat chamber)

Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…

Downloads
94
Likes
34
Rating
0
P
PrintablesMultisystem

MiSTer Multisystem2 Slice Tray FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Slice tray (Expansion module) enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support.…

Downloads
84
Likes
11
Rating
0
P
PrintablesUKE

Replacement closure for a SAVIC pet carrier

Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…

Downloads
84
Likes
61
Rating
0
P
PrintablesJPMakesStuff

USB mount under Prusa Enclosure

Needed a way to hold two USB extension cables… One is from the printer's memory stick slot, the other is from the computer. I don't like plugging the USB stick in and out of the printer directly (so as not to wear out the port) it's much…

Downloads
83
Likes
36
Rating
5
P
PrintablesRobagon3D

Overhead ESP32-CAM Door Mount for Printer Enclosure

This is an ESP32-CAM case that mounts to the top of the inside glass of a 3D printing enclosure and prints without supports. This case fits Version #1 of the MCU board as described by detailed JohnyHV HERE . It may fit version #2 but I…

Downloads
83
Likes
8
Rating
5
P
PrintablesMichal K

IKEA Lack enclosure U-Sealing

My acryl plates are a bit smaller than the enclosure. These are sealings to reduce the gap between legs and acryl. Printed from PETG, no supports needed. Full Material. You need 2 pieces to fit one side of the acryl. 5mm variant - max 5mm…

Downloads
81
Likes
32
Rating
0
P
PrintablesAlexander

Enclosure for RMHV2.1 - DDCSV2.1 - RMHV3.1 - DDCSV3.1 - CNC Router Controller

I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router . But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is…

Downloads
80
Likes
2
Rating
0
P
Printablesm3_del

Ideal In-Sure Lever Wire Connector Snap Mount

This model allows for screw mounting the 5-port connectors to a surface. I included the step files if you would like to modify for different sizes. There is a little lip on the back side to snap the connector in.

Downloads
79
Likes
5
Rating
0
P
Printablessonyslyst

Speaker Enclosure 4"

Speaker Enclosure Designer for 4" Speakers Tested with: Focal 100AC 4" Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes - only needed on bottom part Resolution: 0.3mm Infill: 5%

Downloads
77
Likes
4
Rating
0
P
PrintablesBrummy

EZVIZ C6N Camera Holder for Original Prusa Enclosure

Eine Halterung Innen für die Kamera von EZVIZ C6N für die Original Enclosure von Prusa für vorne Rechts oder Links. Bei 4,4 mm habe ich eine Pause für die M3 Muttern zum einlegen eingebaut. Schrauben sind M3 x 8 für die Kamera und M3 x 10…

Downloads
75
Likes
8
Rating
0
P
Printableszxb466

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

Downloads
74
Likes
23
Rating
5
P
PrintablesAztec

Desk organzier - With holders for measurement tools

Made a holder for my tools used when I'm mesauring for CAD-work. Slots for all kinds of measurement tools and storage devices. If you're lucky, yours will fit too! Printed in PLA, no supports.

Downloads
72
Likes
5
Rating
0
P
PrintablesDimTrit

MINI Enclosure USB Port Cover

I did not want, or need, to use the included USB extension that came with the Prusa MINI Enclosure. I utilize Prusa Connect/Link to transfer files to my printer. Not liking the idea of the extension just laying in the enclosure I decide…

Downloads
72
Likes
16
Rating
5
P
PrintablesMG

Electronic Tape Measure for Component Reels

This is a bracket that fits a $20 electronic tape measure from Amazon. This bracket holds 8mm wide component tape. I highly suggest using "snug" supports at 0.2mm contact distance, and use top surface ironing for best fit. Search amazon…

Downloads
71
Likes
20
Rating
5