Search results: tach

Sort order

Counting matching models…

Pistachio/Peanut Bowl

Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Edit: Variations added due to comments and…

Downloads
7,449
Likes
2,225
Rating
4.91
P
PrintablesART TOO

CALIPER CENTER DISTANCE ATTACHMENT - (Tested)

The must have tool for your workbench !!! Only 3,52 gram's !!!

Downloads
3,318
Likes
1,405
Rating
4.59

PET Bottle Self-Watering Attachment - PET Bottle Upcycling

— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…

Downloads
2,712
Likes
482
Rating
4.85
P
PrintablesJohnny B Mac

Skull with Mustache (V2) - Candy Bowl | Halloween Decoration

*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…

Downloads
2,540
Likes
921
Rating
5
P
PrintablesTeteomat

Pistachio Bowl | Snack Container with Shell Holder | Modern Design - Contenitore Pistacchi 2 in 1 | Snack Bowl con Porta Gusci | Design Moderno

Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…

Downloads
2,333
Likes
606
Rating
4.84
P
PrintablesTronnic

Raspberry Pi 3 Case for Pi & Buck Converter - Direct Prusa i3 MK3 attachment

I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…

Downloads
1,733
Likes
173
Rating
4.96
P
PrintablesCartoonishNerd

Plant Watering Spout (water bottle attachment)

In the area that I live, various attachments, such as spray heads, for commonly used drinking water bottle can be found in shops. Hence, I was inspired to make a spout attachment for watering plants. I took the easy way in designing this…

Downloads
1,501
Likes
164
Rating
4.75
P
PrintablesReven

Pen plotter attachment for Prusa MK3s

This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…

Downloads
1,468
Likes
289
Rating
4.91
P
PrintablesMiguelB.

sunflower seeds bowl / Bol para pipas, pistachos, etc.

Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…

Downloads
909
Likes
96
Rating
5
P
PrintablesErl

Drill vacuum attachment

Attachment for vacuums to collect dust when drilling. Sticks to the wall while vacuum is on. Made for Ryobi portable shop vac (R18PV-0), but probably fits many others. Contact med for STEP files if you want to modify.

Downloads
892
Likes
159
Rating
4.82
P

PET Bottle Holder for Cooling in Water or Attaching to Backpack

This innovative bottle holder design serves a dual purpose: it allows you to cool PET drink bottles in lakes and rivers and easily attach them to backpacks. This makes it perfect for outdoor activities like fishing, hiking, and camping.…

Downloads
612
Likes
228
Rating
4.75
P
PrintablesJellyTitan

Bed cooling fan attachment

This uses 4" dryer ducting hose to connect a fan to a nozzle for blowing air under the covers. I tried this with a box fan, and also a squirrel cage blower fan. The box fan in this design works poorly. The pressure in front of the fan…

Downloads
585
Likes
53
Rating
5
P
PrintablesPetr Bojar

Pistachio bowl

I used PETG for more durability (washing in the dishwasher) I used a fuzzy effect on the surface of the main bowl Scarf seam is used in g-code The size of the bowl is 190mm x 120mm UPDATE 3/1/25 Added stl file of simple upper bowl lid.

Downloads
512
Likes
101
Rating
5
P
PrintablesLanc3d

Mustached Glasses Holder Stand

A holder or stand for eyeglasses with a big nose and mustache. One-piece version requires supports under the mustache and nose (for my set up at least). Two-piece allows the stand to lay on its back (excluding the base part) so that…

Downloads
496
Likes
71
Rating
4.83
P
Printableschrisgabb

Mustache for trombone

This is a mustache to attach to a brass mouth piece you might want to print the clip if you want to make sure it fits. Category: 3D Printer Accessories

Downloads
438
Likes
23
Rating
5
P
Printables3D_print_de

Pistachio shell

Easy to print pistachio/pipa bowl with waste hole.

Downloads
335
Likes
45
Rating
5
P
Printablescookiecrook

Shop Vac Attachment Mount for 2.5", 1.25", and some 1.875" (1⅞" Ridgid)

PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…

Downloads
326
Likes
94
Rating
5
P

Adjustable sternum/chest strap attachment

An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.

Downloads
288
Likes
100
Rating
5
P
PrintablesFélix

Hydration pack tube magnetic attachment kit

This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on your backpack. I have a Osprey hydration reservoir that comes with a hose magnet kit , however, the part you put on the backpack is designed to…

Downloads
285
Likes
49
Rating
5
P
PrintablesPatrik

Nametag with safety pin attachment

Description A customizable nametag/badge with a safety pin holder . Print considerations The name tag for the paper insert (the largest part) needs to be printed with supports from the build plate only. None of the other parts needs…

Downloads
272
Likes
10
Rating
0
P
PrintablesFlo

Watering can attachment for Seedlings (parametric FreeCAD file) - Spar-Aufsatz für 10 l Gießkannen

This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).

Downloads
237
Likes
34
Rating
5
P
PrintablesLuce

Kitchen Aid Stand Mixer Attachment Holder for Wire Rack Remix

ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…

Downloads
237
Likes
73
Rating
5
P
Printablesstritti

Goggles Nose Stand with Mustache - Low Poly

After creating my first glasses stand , I tried now a low poly version with improved, more realistic, form factor. Inspired by a stand which I saw weeks ago created in wood. Printing I printed it using supports by setting…

Downloads
231
Likes
61
Rating
5
P
PrintablesVSVlab

Pistachio bowl/ Bol pour pistaches

EN Do not activate supports Bowl with lower compartment for waste (empty shells, packaging, etc.) 2024-12-30 Addition of a version with a 2x0.3 mm operating clearance (the basic version is 2x0.2 mm). Two files “BA-HautJeu0.3x2.STEP” and…

Downloads
214
Likes
25
Rating
5
P
PrintablesCorey Ward

Tineco A10/A11 Hero Latch Replacement (Accessory attachment)

This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…

Downloads
163
Likes
9
Rating
5
P
PrintablesJed LaRue

Dyson DC07 vacuum bag attachment

My Dyson DC07 hose has an arch on it and did not allow me to suck the air out of my vacuum bags. This attachment will snap into your Dyson hose and allow you to get all the air out. Printed with PLA but PETG will work as well.

Downloads
159
Likes
20
Rating
4.8
P
Printablesgalactic

Vacuum Attachment compatible with Shark Navigator

This vacuum attachment is meant for vacuuming in tight spaces. Specifically, it angles “down" along the long edge for concentrated suction.

Downloads
158
Likes
15
Rating
0
P
Printablesgillis

Pistachio Bowl

I've provided files for the MINI, MK3S and MK4 along with 3MF and STL files

Downloads
157
Likes
25
Rating
5
P
Printablestom

Halterung zur Befestigung des Gardena Micro-Drip Verteilerrohrs 4,6 mm (3/16") an einem Blumenkasten/ Bracket for attaching the Gardena Micro-Drip distributor pipe 4.6 mm (3/16") to a flower box

Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…

Downloads
149
Likes
38
Rating
0
P
Printablesaubedj

Ryobi Mitre Saw to Dewalt ShopVac Attachment

Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw. Print instructions Print standing up with at…

Downloads
130
Likes
11
Rating
0
P
PrintablesBentWeiss

Bottle Opener with Skateboard Tool Attached/Skateboard Tool with Bottle Opener

Prints best with no supports on the face of the model furthest away from the 3/8'' wrench.

Downloads
126
Likes
20
Rating
5
P
Printablesaschmitz

Lutron Aurora Attachment and Blank Plate

Main Piece This item includes several options for mounting your Lutron Aurora Philips Hue dimmer. Lutron sells a “L-AWALL1-WH” plate for mounting (intended to mimic a “traditional” switch that the Aurora can mount to natively), but this…

Downloads
121
Likes
13
Rating
0
P
PrintablesBoomerguy

Classic scratcher tip for Scratch Attach!

A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.

Downloads
120
Likes
8
Rating
5
P
Printablesk93f

Hikoki / Hitachi cordlessdrill holder

While searching for an efficient way to store my cordless drill, I came across several solutions. However, none of them met my requirements, so I decided to design my own storage solution. This design is specifically created for the…

Downloads
120
Likes
15
Rating
5
P
PrintablesKiloxTango

Portable Hinged Monitor Mount, Attaches Magnetically, Extendable. WORK IN PROGRESS.

This is a work in progress, feedback is welcome. The two CAD pictures are V3 and the other pictures are V2. V3 pictures coming soon. I made this with the intention of being able to attach different portable monitors to a “tough” laptop,…

Downloads
116
Likes
38
Rating
0
P
PrintablesKevinWRay

Dyson V-8 Wall mounting bracket for attachemnts.

Dyson V-8 Wall mounting bracket for attachments.

Downloads
100
Likes
20
Rating
5
P
Printablesk93f

Hikoki / Hitachi cordless impactdriver holder

While searching for an efficient way to store my cordless i9npact driver, I came across several solutions. However, none of them met my requirements, so I decided to design my own storage solution. This design is specifically created for…

Downloads
97
Likes
11
Rating
0
P
PrintablesEmery

ClickTags - magnetic nametag with attachable interest wings - the queer & kinky nametag

The ClickTag is a nametag that was originally designed for a kinky event to enable people to show their contact interest and role. Attach or detach one or up to four of the color coded wings as your mood or interests change - they snap…

Downloads
94
Likes
20
Rating
0
P
PrintablesHutwave

Dust Collector Vacuum Attachment

Vakuum cleaner attachment for drilling holes. It holds itself on the Wall. Printed with 0.2 layer height in PETG. Print took about 3h 7min. Use support on the inner ring.

Downloads
90
Likes
11
Rating
5
P
PrintablesJaso

Tit bird feeder attached to a window pane

Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.

Downloads
81
Likes
16
Rating
0
P
PrintablesKongolasse

Wall mount for IKEA Badring water sensor, with the option of attaching a cord to extend the sensor.

Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…

Downloads
80
Likes
5
Rating
5
P
Printableshorrovac

Massager (theragun clone) attachment

The provided attachments for the massager are too small to transfer a lot of energy to big muscles, and they are too hard to work near bones. I designed this to take a pad of foam and thus do both tasks - primarily useful for leg muscles.…

Downloads
80
Likes
8
Rating
0
P
PrintablesFC2M3D

DREAME adaptor for AQUAPUR Attachment (Remix)

I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…

Downloads
79
Likes
11
Rating
0
P
PrintablesCreativus

Salesians Logo Keychain - Llavero Logo Salesianos - Portachiavi con logo Salesiani

I printed this in white PLA+ on my CR10S at 0.28mm with a 0.4mm nozzle, it came out great! (30 min. print) If you want you can paint it Feel free to like, download and follow me!…

Downloads
67
Likes
2
Rating
0
P
PrintablesBooks

Mustache Coin (Novelty, US Quarter, and Euro Sizes Included)

Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .

Downloads
67
Likes
8
Rating
0
P
PrintablesMathias

Particle Tachyon SBC modular case

This is a custom box for the Particle Tachyon single board computer (SBC). This computer has the Raspberry Pi form factor, but does not use the exact same port, so a tailored case was in order. There are several variant of the model to…

Downloads
65
Likes
6
Rating
0
P
PrintablesHatchet

Bugasalt v3 Lamp attachment

This is a Lamp mount for the Bugasalt V3 It clips on the on the mounting porint on top of the gun the lamp is also just slided in. the Diamater for the lamp is 23,5mm. so it should fit all lamps that are slightly bigger then the diameter.…

Downloads
62
Likes
21
Rating
5
P
PrintablesMcDrucki

Bracket to attach Aqara motion sensor in verios ways

Bracket for attaching the Aqara motion sensor to the wall or to the included hook that fits on (my) stairwell. There is a recess in the hook for inserting a magnet.

Downloads
61
Likes
2
Rating
0
P
PrintablesOutbacky

190mm Sand Level Tamper - Broom Head Attachment

I needed to level the sand while relaying some sunken pavers, but I didn't want to spend $65 on a specialized sand tamper tool . Since I couldn't find a suitable 3D model of one, I decided to try designing my own. Using my Prusa i3 MK3S+…

Downloads
59
Likes
6
Rating
0
P
PrintablesHatchet

Bugasalt Laserpointer attachment

Slide on Laserpointer attachment for the Bugasalt V3 the attachment is slightly angled so that the laser is accurate at the optimal shooting distance at about 45cm - 1m this attachment is made for a cheap rechargeable cat toy laserpointer…

Downloads
59
Likes
16
Rating
5
P
Printables3DJG

Detachable Bahtinov Mask for Meade SN 10in

Detachable Bahtinov mask for Meade SN 10 inches (F 1016mm, BF200). The mask is designed for a focal length of 1016 mm with a Bahtinov factor of 200. It works well with a telescope inner diameter of 297mm, where it adjusts and self-centers…

Downloads
55
Likes
2
Rating
0
P
PrintablesClamikra

Magnetically attached neck and base for Full Sized Voronoi Head

I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…

Downloads
54
Likes
6
Rating
0
P
PrintablesMartin

Pistachio/Peanut Bowl 3x hole

Pistachio/Peanut Bowl 3x hole

Downloads
51
Likes
4
Rating
0
P
PrintablesLuce

Hitachi 18V DV 18DL Drill Mount

Wall mount for the 18V DV 18DL Hitachi Cordless Drill. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. Drill hangs out of the bottom, so be…

Downloads
48
Likes
4
Rating
0
P
PrintablesFélix

Dyson attachment under-shelf or ceiling mount

Simple 1 screw mount for Dyson attachments, designed to be mounted on a horizontal surface like under a shelf or on a ceiling. Works with both standard and powered attachments.

Downloads
45
Likes
3
Rating
5
P
PrintablesJed LaRue

Dyson DC07 Angle Attachment

This attachment snaps into a Dyson DC07 Hose. Printed with PLA but PETG works as well.

Downloads
42
Likes
10
Rating
0
P
PrintablesAdam

AirTag tough case with attachment holes

This is a tough case for your Apple AirTag that keeps it secure and provides flexible mounting options. Design features Holds the AirTag tightly and completely protects the battery compartment, preventing it from being unscrewed…

Downloads
42
Likes
8
Rating
0
P
PrintablesBGDglider

Snap-Fit Charging Stand for MG5720 with Attachment Slots – TrimDock

Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…

Downloads
40
Likes
18
Rating
5
P
PrintablesAlex@APTO

Hooks for laboratory cables with space for attachments | Haken für Laborkabel mit Platz für Zubehör

(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…

Downloads
40
Likes
5
Rating
0
P
Printablesgwendal

Dewalt 735 to trashcan attachement

Connector between the exhaust of the Dewalt 735 Planer to the Black&Decker leaf collection system . Wood chips are neatly collected in a trash can.

Downloads
37
Likes
9
Rating
0
P
PrintablesHelios-TX

Hardline Tach/Hour Meter Mount for a Parajet Mavrick Frame

I was looking for a better way to mount my Hardline Tach/Hr meter to my Parajet Maveric frame. When I purchased my motor, it had the meter zip tied to the frame (nothing wrong with it). While my motor was down for some maintenance, I…

Downloads
35
Likes
1
Rating
0
P
Printables3dprinterrrrr

Makita 9403 4" x 24" Belt Sander - replacement dust nozzle (416497-7) and vacuum attachment

Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…

Downloads
34
Likes
5
Rating
0
P
PrintablesShane Deiley

Ploopy Nano BTU Mod with ZSA Moonlander Right Thumb Cluster Attachment

I am a very novice CAD user, so the STL has a lot of flaws - not smooth edges, lacking symmetry, etc. I really wanted to mount a trackball to my ZSA Moonlander, particularly for my right thumb. I took a BTU mod of the top part of the…

Downloads
33
Likes
9
Rating
0
P
Printables3DFW

HydroFlask Paracord Handle Ring – Wide Mouth Bottle Attachment

This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…

Downloads
31
Likes
10
Rating
5
P
Printablesrj_ruin

American Morse Equipment keyer base and leg strap attach plate

I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…

Downloads
29
Likes
1
Rating
0
P
PrintablesOBConcepts

Riese & Muller Bottle Holder Attachment

I have uploaded two Gcodes for the left and right side. For each side you will need: 1 x M6x16mm ((=== Button Head screw 1 x M6x16mm []=== Round Socket Head screw 1 x M6x30mm ((=== Button Head screw 1 x M6 Nyloc Nut If you would like to…

Downloads
28
Likes
7
Rating
0
P
PrintablesAnton Soliaryk

Dyson v6 attachment micronozzle (Dust Daddy)

This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.

Downloads
26
Likes
2
Rating
0
P
Printablescookiecrook

3/4‐10 (¾-10) mount fits Robust/OneWay/Savanah lathe attachments for Live/Drive Centers

Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…

Downloads
24
Likes
1
Rating
0
P
Printablesthefitthings

Nutshell bowl attachment 19cm IKEA

A nut attachment for an IKEA 19cm bowl to separate nuts from their shells. Printed with PLA Link to Bowl: https://www.ikea.com/de/de/p/ikea-365-schuessel-weiss-00468130/

Downloads
23
Likes
5
Rating
0
P
PrintablesMsize

SharkAttachment_ThinPoint

It should fit any Shark Handheld Cordless

Downloads
23
Likes
3
Rating
0
P
PrintablesRamscout

RTIC 65qt Cooler Wheel Attachment

This model uses the recess on either end of the cooler to attach wheels. This model is split into two pieces to allow printing on a MK4. The wheel attachment is held on with a ratchet strap that is threaded though the slots on either end…

Downloads
23
Likes
6
Rating
0
P

Nose and Eustachian tube equalizer trainer

Many divers experience difficulties to equalize and suffer from a constricted eustachian tube or clogged. Reeducation of the tube can be easily done with the combinaison of a party balloon mounted on the spherical part and while following…

Downloads
23
Likes
3
Rating
0
P
PrintablesJed LaRue

Dyson Outsize Absolute+ Vacuum Seal Bag Attachment

Dyson Outsize Absolute+ Vacuum Seal Bag Attachment I created this using the template from @M3D3. You can use it from most newer Dyson stick vacuums.

Downloads
22
Likes
2
Rating
0
P
PrintablesDefozo

LumiClip: The Versatile Glow Attachment

🌟 Introducing LumiClip The ingenious glow-in-the-dark attachment 🌙 that brings a combination of safety, style, and versatility to everyday items. LumiClip shines brightly in the dark, ensuring you stay visible and your items are easy to…

Downloads
18
Likes
3
Rating
0

Attaching the plastic gutter to the gutter hook

EN: Simple coupling for attaching the plastic gutter to the gutter hook. The coupling is inserted or screwed into the half-slot in the gutter and then slid onto the plate at the end of the gutter hook. CZ: Jednoduchá spojka pro uchycení…

Downloads
17
Likes
5
Rating
0
P
PrintablesCraftyOldDude

Vacuum Attachments Holder - Wall Mount

A wall mounted attachment holder for Eureka RapidClean Pro Cordless Vacuum. Made specifically for the two attachments which come with model NEC280TL, which the manufacturer neglected to provide a suitable storage solution. The arms…

Downloads
16
Likes
1
Rating
0
P
PrintablesRobert Schiele

Adapter for Pedicure Attachments from Beurer Foot Spa with Electric Screwdriver/Drill

If you want to use the pedicure attachments from your Beurer FB 50 foot spa independent of the foot spa this adapter allows you to drive them with an electric screwdriver or drill. You can insert the adapter into the screwdriver/drill…

Downloads
16
Likes
1
Rating
0
P
Printablestom

Regal für Bonsaitopf mit Balkonbefestigung/ Shelf for bonsai pot with balcony attachment

Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…

Downloads
15
Likes
5
Rating
0
P
PrintablesDirkHoefle

240mm Watercooler attachment

The model contains a 5mm spacer for 2 80mm Fans and the attachment for the 240mm radiotor. I used this model to cover up the fans https://www.printables.com/de/model/373460-hexagon-fan-cover-80mm-120mm-140mm/comments/1557508

Downloads
13
Likes
1
Rating
0
P
PrintablesRoostaff

Mk3s / Mmu2s Attache Prise Molex 8x2

Modif câblage mmu2s avec une prise molex et une attache imprimé pour y fixer sur l'imprimante pour sécuriser les prises et éviter tout soucis et qui passe a coté de la fixation du rmu Visserie: 1 vis M3x14 pour trou existant dans le cadre…

Downloads
12
Likes
1
Rating
0
P
PrintablesLsGeorge

Natrubek (attachment per barrel)

Nástavec na barel pro snadnější vylívání kapalin. A barrel attachment for easier to outreach to make liquids more easily

Downloads
12
Likes
0
Rating
0
P
PrintablesJoKa

Vortex attachment for falcons and microcentrifuge tubes

The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…

Downloads
12
Likes
1
Rating
0
P
Printablestom

Haken zur Befestigung von Fensterdekorationen/ Hooks for attaching window decorations

Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…

Downloads
11
Likes
2
Rating
0
P
PrintablesReesesben

Robot X5 Pad Attachment Ring

This is the ring to attach the mop pad to the robot x5 I printed one and it works great. I used PETG but pla should work fine too!

Downloads
11
Likes
0
Rating
0
P
PrintablesJoris Calvat

RC - Maverick ION XB 1-18 RTR - Attache carrosserie

Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…

Downloads
10
Likes
1
Rating
0
P
PrintablesKid Printer

Spool Attachment Updated - REMIX

I liked the model but wanted the two sides to look (nearly) identical. So, I made this.

Downloads
9
Likes
2
Rating
0
P
Printablesmatthew

Ikea clipboard attachment

Ikea clipboard attachment

Downloads
7
Likes
2
Rating
0
P
Printablesshaakunthala

Buffer Attachment for HOMCOM Bicycle Trailer [PETG]

I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240) I designed this “clamp and insert” buffer attachment to protect the frame paint when I set…

Downloads
6
Likes
0
Rating
0
P
PrintablesMarc

Norton commando Tacho drive house cover

Designed for my 1974 Norton commando 850 MK2a. Should fit on all Commandos 750 and 850. Prints without support. 0,15mm structural. Remove before starting the engine. Bear in mind that PETG looses its shape resistance around 65°C to 75°C…

Downloads
3
Likes
1
Rating
0
P
PrintablesJPMakesStuff

Hose or attachment adapters compatible with Ryobi GoGoVac PCL731

Adapter compatible with the Ryobi GoGoVac PCL731 Suggest printing in PETG for strength. Pictured using OVERTURE PETG Grass Green which is very close to Ryobi green. Don't have a 3D printer yet? That's OK, order already printed from……

Downloads
2
Likes
7
Rating
0
P
PrintablesK1NG SULT4N

PetLibro Granery Feeder Funnel Top Attachment with Secure Lid

Height: 178mm Length/Width: 184.7mm Designed for FDM 3D Printing For best results, print funnel top and lid upside down. .18mm layer height 4 wall layers 4 top and bottom skin layers Various options for infill Minimal supports needed

Likes
8
Rating
0
P
PrintablesFrank 3D

...another Pistachio/Peanuts (sorting) bowl.....

I saw a few of these around, was bored one day and decided to mess around with designing one. I printed it in Turkey Egg from Filamentium….fun filament! Enjoy Designed with those who don't have the most elaborate printer in mind. **…

Downloads
9,886
Likes
3,335
Rating
4.89
P

Lamborghini Countach Kit Card (known from Wolf of Wall Street and Cannonball Run)

Summary This is a model of a Lamborghini Countach in a kit / gift card style. Some characteristic details can be discovered. Equipped with big spoiler and separate exhausts :) After printing, the model can be assembled with the help of…

Downloads
7,130
Likes
1,372
Rating
4.81
P
PrintablesDownRight

KitchenAid Stand Mixer attachment hanger

I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…

Downloads
6,060
Likes
3,545
Rating
4.88
P
Printablesiplop

Kitchenaid Attachment Hanger

Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…

Downloads
5,192
Likes
1,489
Rating
5
P
PrintablesTeachingTech

Portable drill press/depth stop attachment for hand drill - Open source

I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…

Downloads
4,445
Likes
3,320
Rating
5
P
Printables43D PRINT

Pistachio bowl

Pistachio bowl to separate shells Print settings 0,2mm layer 3 walls 25% infill no supports

Downloads
4,229
Likes
1,068
Rating
5
P
Printablessdaendi

Multi-axis vice with interchangeable attachments.

The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…

Downloads
4,056
Likes
2,483
Rating
4.8