1,778 models
A simple Coaster set design for the automotive fans out there Bolts are printed separately and glued in place Supports shouldn't be necessary For the Disc, i find Prusaslicer or Superslicer does monotonic top ordering better than Cura to…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Hello, I know you have been given disc brake spacers with your new bike and I also know that you have lost them. So have I :) But no worries. They are easy to print :) This simple spacer should work with both Shimano/SRAM (Avid in my…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This is the second Version of the Sim Racing Handbrake. It uses less screws and should be easier to assemble. The Base and two side panels are now one piece for easier assembly. It may not be as good looking and reliable as the first one…
Print approx. €10.63–€12.99 excl. taxPreliminary estimate for PETGSource material: PET
Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
All the files that are required are downloadable and ready to print I made adjustments how the parts are printed and don't need to be changed but you can still change them if you want to use less filament. Also when assembling use…
Print approx. €6.03–€7.37 excl. taxPreliminary estimate for PETGSource material: PET
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
This model is a replica button for the end of the park brake (hand / emergency brake) in a Peugeot 307. I fitted this in my own 307 and it work perfectly. I considered sanding it to remove the layer lines, but printed in copper look…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This set of gauge can be used to measure the thickness of the brake pad without removing them from the car. Gauge range is 1 to 8mm. Gauges can be hold together using a M4 screw + nut. Accuracy will depends on the printer but checking…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
A simple tool designed for a friend, to help bleed your brakes on BMW servo bikes. BMW charges an unbelievable amount for these funnels so this will save you significantly. Replaces the OEM part number #341580 Should work with R1150R,…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…
Print approx. €14.82–€18.12 excl. taxPreliminary estimate for PETGSource material: PET
Deko z.B. für Modellbahner
Print approx. €18.23–€22.29 excl. taxPreliminary estimate for one variant
Hello, I have a brake for a swivel chair for you - it won't move . It's for a swivel chair for the office or living room. It's for a wheel size of 60x60mm, so you can enlarge / reduce it as needed. Suitable for a racing simulator or a…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
This applies to popular and cheap Decathlon scooter. Original part got broken and no replacement parts are available by Decathlon. This mudguard serves as brake so without it the scooter is quite dangerous for a kid - thus unusable.…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
I bought e-bike conversion kit and it comes with sensors for the brake levers to shut off motor when braking. Usually you stick the sensor and the magnet to the levers and you are good to go. Not in my case. The magnet travel was minimal…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Back Gauge Add-On The back gauge helps bending same lengths several times without the need of marking your sheets before. Just set the leg length, tighten the bolts and bend as usual. Just one sheet after another without interferring. You…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Here is a modded mount plate for the Next Level series, it allows fitment of a USB “Chinese Version” Handbrake (e-Brake) and the driving force shifter together. The factory plate does not allow both to go together without drilling random…
Print approx. €16.63–€20.33 excl. taxPreliminary estimate for one variant
FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
As it says in the title - a third brake light for an Opel Rocks-E (or probably also Citroen Ami). Well, the plastic parts for it. In addition to the plastic parts, you'll need: a brake light (duh!). I used (and designed the holder) for a…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Poignée de frein pour fauteuil roulant manuel Breezy Style X Ultra. Compatible avec d'autres modèles mais je n'ai pas la liste précise (voire photo). Pour remplacer les poignées d'origine en caoutchouc qui se détachent et se perdent…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement part for the Saitek Flight Rudder Pedals – specifically, the spring holder for the brake axis. The original plastic part broke at the point where the return/centering spring is attached. This 3D printed model is a…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
This is a third brake light assembly I designed around a cob led strip light to replace the dated OEM light. I tossed mine when I stripped my interior and wanted to design my own so here's what I came up with. I printed this in ABS CF as…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
1:10 drilled brakes for any car
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Brzda kočárku Britax Römer GO NEXT / Brake pad for the stroller Britax Römer GO NEXT Nejlepší tisk s filamentem TPU 95A 1 kg Black / Best print with TPU 95A 1 kg Black filament
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Ever started to move your motorbike, forgetting you have a brake / disc lock fitted? No me neither … not! This is a warning triangle that loops onto the warning coil from a disc lock and lightly clips onto the throttle. It makes the fact…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
I have a snapper model 280812BE (80422) - Snapper 28" Rear-Engine Riding Mower, 8hp I designed this as a drop in replacement part for: Snapper 7022344 CABLE, Brake (Superseded to 7022344YP) The issue is they wanted to charge me ~$40.00 w/…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
We have a OXELO Freestylestep MF500 step for the kids. While it's a good and sturdy step, braking takes quite a lot of force/weight. The kids have to press really hard on the brake metal before it even touches the wheel, therefore…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Rigid brake handle for paraglider controls, I made it to apply on the C-lines controls on my glider, developed to be as more light, durable and confortable as possible.
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
CZ: Náhrada prasklé pružiny brzdy skládací koloběžky JD Bug Deluxe. Po vytištění zasuňte částí s opěrou (širší část ukončující rameno se 2 výstupky) dovnitř do koloběžky, na tenké rameno nasuňte blatníkovou brzdu a propojte původním…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Baby stroller replacement for Break.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
The original Puky brakes are floating and may not come back to the center position. As a result, the brakes keep grinding. This is not fun to hear, and not fun for the biker ! This simple spacer goes on the red side and holds the brake…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Tuto součástku již není možné sehnat, tak jsem ji vytvořil. Výtisk z ABS
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a replica of the bracket for the POSSO Storage System. With this bracket, multiple boxes can be attached, preventing them from moving against each other. Dies ist eine Replik einer Klammer für das POSSO Aufbewahrungssystem. Damit…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Gently snap the caliper onto the disc.
Improved version of my brake disc keychain, featuring enhanced fit and refined details for a more realistic look. Use a small amount of force to snap it into place.
This is a Remix “Spool Brake” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW…
Coaster set with brake caliper and disc aesthetics. The kit consists of 4 coaster discs and a holder shaped like a calip
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
Spacer since you shouldn't squeeze a hydraulic brake without having anything between the pads. This is bad for your brakes. How I Designed This Came with my disc brakes, nestled between the pads in the caliper. I made a high resolution…
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
Cable Clip for shift- and brake cable: 4mm diameter for shift cable 5mm diameter for brake line There are 2 version: shift cable to brake line shift cable to shift cable
The neighbor found out I have a 3D printer and asked if I could design him a brake block to do maintenance on his bike.
CZ: Pre lavú stranu použite možnosť zrkladit model EN: For left side use mirror part. EN: bmw e36 fog light brake duct output diameter 70mm CZ: bmw e36 prívod studenýho vzduchu k brzdám Priemer výstupu 70mm
Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great! The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or…
Do you like print like in a race? Then you will need a good brake (just joking). How to print it? - Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake…
Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…
Shimano technical training has a process for cleaning the pistons on the disc brake calipers which relies on cutting down a bleed block (such as this design is based upon) to make a piston exposure tool. Having to hack apart a bleed block…
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…
Hier habe ich eine beleuchtete BMW M Bremsscheibe konstruiert, welche bei angeschaltenen LEDs so aussieht als würde sie glühen. Ich habe diee Maße so angepasst, dass die unten aufgeführten elektronischen Bauteile eingebaut werden können.…
You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…
The brake pedal stopper pad may deteriorate over time, allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps. In order to…
For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3
This is a perfectly working version of the bleed cup for Shimano hydraulic MTB brakes. It has the right M5 thread and is a bit bigger than the original, which makes it less likely to overflow. Put some rubber O-rings on the cup and the…
A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
A tool for installing a Shimano brake barb. You will need M4 and M5 bolts and also M4 and M5 square nuts. Nuts need to be placed during printing
Pad spacer for 4 piston shimano brake calipers. The pad spacer for disc brakes is an indispensable tool for transporting a bike without wheels. Once inserted, the spacer prevents the pistons from extending when unintentionally using the…
PET Bottle Cap Adapter to build a brake bleeder as seen on ChrisFix . Prints without supports in under 30 minutes. This is ONLY meant to prevent the tube from sliding in and out of the bottle, not as spill prevention. The cap does not…
This brake tool is easy to use. This brake tool is an essential tool for any bike owner or mechanic. A brake tool suitable for bike hydraulic disc brake calipers, which can compress your piston within seconds when replaced. It is designed…
Dimensionally accurate three-part design that can be printed without any painting or post processing. Designed to be fitted to 6mm shaft. Main body printed in matte black PLA Arrow infill printed in white PLA Label insert printed in matte…
For torquing in certain Shimano CenterLock Disc brake retainer caps. Category: Tools
Check the brake lever inclination on a road bike that may be subject to the UCI's recent rules. Based on the official UCI version, modified for faster and easier printing with less waste. Information on the UCI original at the bottom of…
A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…
This is a Magura plastic clip for transporting your mountain bike with the wheels off. All dimensions and measurements were carefully taken from an original Magura pad spacer. Print with supports with the flat side facing down and the…
Set of 6 parts to create lift and turn movement for Airbus Parking Brake Handle. Works with 90 degree Cam Switch 20A 1 Pole ON/OFF 90, which is pictured and can be found online Designed to work with my PARK BRK handle model:…
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the TH8A mount from floano: https://www.thingiverse.com/thing:3325124 Customized to hold the SHH Shifter and/or a handbrake…
As I've not liked the short travel of the brake pedal, I've created an elastomer replacement. I've printed it in different hardness TPUs with 4 perimeters and different infills with a 0.4mm nozzle and replaced two of the original…
I drew some inspiration from some other designs on here to make a completely hidden sequential mod for the Logitech G27 shifter. The bracket goes underneath the shifter boot and you use an elastic band (or multiple) to make the shifter…
This is the cup needed when bleeding Shimano hydraulic bike brakes. The thread might not be the right one. Otherwise the cup is very close to the original one. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter…
OTHER CREATIONS: GEARSHIFT KEYCHAIN V2 - [ FREE DOWNLOAD ] PATREON : [ Follow me on patreon for free access to our 3d models library and exclusive content!! ]
For more exclusive esigns or If you want to sell this print, get commercial license via patreon https://www.patreon.com/c/Artemix796 Stand Brake Disc Lamp – Honda Type R This is a decorative stand lamp inspired by the iconic brake disc…
I have a roof rack with a thru-axle mount, so the bike rides at the top of my car with the front wheel removed. I've added a simple loop to the end of this brake caliper spacer, so that I can thread a rubber band through and wrap it…
After testing a moza HB at a friend's house, I needed to make one for myself so I began working on this model. This HB is especially great if you already changed your logitech brake pedal spring and kept the old one. Otherwise, you'll…
haven't got any square nuts so modded to using standard hex nuts
This is a air rifle moderator / muzzle brake for .22 and .177 cal. Has ½ x 20 threads to thread on to the barrel.
This is a funnel I created for topping off the brake fluid level for my '15 Ford Focus. Like many cars made now, the brake fluid reservoir is actually recessed under a cowl. I wanted a simple way of topping off the brake fluid level while…
A 1:1 scale model of a vehicle brake caliper, two piece rotor, bearing hub and spindle. Uses real tapered roller wheel bearings so the rotor spins freely! Mounted on stand legs to make a very nice desk model or even an educational tool to…
A handy tool to secure the brake handle of your bike in braking position. Printed in PETG with layer height 0.2mm, other filaments should work just fine.
Want to sell physical prints of this model? Get a commercial license by joining my Patreon: https://www.patreon.com/c/Artemix796 I’ve completely reworked and upgraded the design to make it more realistic, faster to print, and much easier…
New updated version with larger air intake. Now supports both 18" and 19" wheels and also both the original smaller brake calipers and the larger brake kit (see note below). For 60mm hose (inner diameter) PRINTING: Can be printed without…
As a mechanic i am checking customers brakes on a daily basis. I have used a metal version of this tool for years and I paid $15-$20 for it. It's a useful way to measure how much a brake pad is worn down and communicate it to the…
With this model you can adjust, loosen and lock paracord-type ropes or other types of ropes. By performing a simple movement the rope is released, and in the opposite direction it is tightened. I have also created a variation of the model…
This coaster is made to look like a brake disk, so it’s perfect if you’re into cars or just want something different on your desk. It’s got the classic ventilated disk style with holes and a bold red holder that makes it stand out. It’s…
My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
I needed a better break line guide for my KTM 690 Rally Fairing Kit. But it should fit every normal enduro / motocross fork. Design to print in TPU.
Piston block for servicing hydraulic, 4-piston brake calipers Remove brake pads and push pistons back into bore. Insert this block and pump the brake to push out a single piston for cleaning. Designed around Shimano calipers, but I have…
I required a tool to help flush the brake-fluid in my 2005 BMW R1200GS, without introducing air into the servo-assisted circuits. And I did not want to spend lots of money and time waiting for it to arrive. As far as I know, this funnel…
This is the V2 of my early Brembo Brake Disc and caliper! You can find the old one here I haven't tried to print it yet but thanks to the suggestion of https://www.thingiverse.com/OvrKll it could be possible. I'm working on the caliper…
The model is for RC car scale 1/5. It is a copy of the original Speedline Montecarlo with brake vent. There are two files for the brake vent: SINGLE SOLID: it is the model for the printer with one extruder (one color); DOUBLE SOLID: it is…
This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…
( Update 29 Jun 25 - Please note… Of the few bits of feedback on this model, most indicate that the central pin can break off and jam in the end of the brake pipe. It's then difficult and messy to remove. Therefore, please ensure that you…
Standard Euro E20 thread. Started with another cap but the others had issues. So I made one from scratch. Needed a vent cut out and center protrusion for factory gasket support. Need to be a bit beefier to prevent cracking of the cap.…
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
