Counting matching models…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on X and YouTube: Designed for use with the Tang Band W3-1876 woofer, and the GRS A25-2T tweeter. Usable overall bandwidth of 50Hz - 16kHz in the nearfield; ideally against a wall. Tang Band W3-1876S 3" Subwoofer:…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Dayton Audio ND25FA-4: https://www.parts-express.com/--275-059 Dayton Audio TCP115-4: https://www.parts-express.com/--295-415 Dayton Audio XO2W-3K: https://www.parts-express.com/--260-144 Screws:…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on X and YouTube: Designed for use with a single 2" Tectonic balanced mode radiator. Suitable between 100Hz - 18kHz. Larger arrays will accommodate frequencies as low as 70Hz. Use reusable adhesive to seal around everything.…
As seen on X and YouTube: Designed for use with a pair of the Dayton Audio RS100-4 4" full range drivers, and a pair of the Dayton Audio DS175-PR 6.5" passive radiator. Suitable between 50Hz-18kHz. (Sigma Studio DSP chain file included.)…
As seen on X and YouTube: Designed for use with three Tang Band W3-1876S 3" subwoofers. Suitable for corner-loaded output between 30-100Hz. Tang Band W3-1876S 3" Subwoofer: https://www.parts-express.com/--264-909 Hilitchi Binding Posts…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This “Digibox” can hold a deck of 55 sleeved, standard size cards. The sliding-frame can be used as a display window for the main card of the deck. A memory token is also included and can be placed inside of the main box. The three pieces…
As seen on X and YouTube: Designed for use with six 3.5" Tectonic balanced mode radiators, and a pair of the Tang Band W5 series subwoofers. Suitable between 30Hz - 18kHz. (Sigma Studio DSP chain file included for the Dayton Audio…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Instructions from creator: 0.3mm layers 3 shells 4 top and bottom solid 40% triangle infill I used 0.2mm layers
As seen on X and YouTube: Designed for use with four LW150-4 low profile woofers from Dayton Audio. Suitable between 30Hz and 80Hz, corner-loaded in small to medium size rooms. Dayton Audio LW150-4:…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
A tool to easily disconnect the PTFE tube from the qidibox buffer. You no longer need to lift the buffer to expose the coupler. Just insert this into the hole where the tube is and push down to release the coupler and then pull the tube…
Flexi dog leash Multibox for dog poop bags
A very simple cap for Qidi q2 riser sent with Qidibox: Prints ok with PLA, maybe best with PETG ...
As seen on X and YouTube: Designed for use with a pair of the Tectonic BMR80C-8 full range drivers or a pair of the Dayton Audio PC83-8 full range drivers, depending on availability. Usable overall bandwidth of 55Hz - 20kHz in the…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
I wanted to print this, but didn't have a printer big enough, or a way to cut acrylic. I cut through the internal walls to try to give the glue more to grab. My prints came out pretty rough, did them quick and dirty with a .80 nozzle, and…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This driven gear is replacing the stock qidibox spool gear. No longer rely on a pen spring for operation! This uses a HF0306 one-way bearing to function identically as the OEM gear but more reliable rewinding of the spool (and no more…
Top and bottom clamshell cases for PiBox. Order the PiBox PCB boards and learn more at pibox.io
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Intention to print these 4 parts and then use ½inch nominal (0.472 in) plywood for top and bottom. To use threaded rod (¼-20 or similar, those are 6.5mm holes) to clamp shut I'm finding 400-800g per part, so this is a plastic hog… I'm…
UPDATE : A short version has been added more detail below A short version for people that want it to be shorter. It has been shortened by 60mm in height. I also noticed that its dampening of X vibrations has been increased compared to the…
Try this as a smoother, less broken-up version: 20 cm x 20 cm Print Bed Version This is a modified version of the subwoofer enclosure, split into smaller parts so it can be printed on 20 cm x 20 cm print beds. I added connectors to make…
Hello, I designed this filtration box to work with the Bambu Lab P1P and X1C. It has a few key design benefits to help ensure the best filtration possible preventing exposure when printing. Benefits: Utilizes one or two 7530 centrifugal…
A tiny mini box design for audio device. Can try to modify the size for others purpose. Interior Dimension miniboxA : 53mmL x 33mmW x 11mmH miniboxB : 60mmL x 41mmW x 20mmH Print material : PLA +/PRO or PETG Print Support : No Layer…
Xiaomi remote wall holder. Its good for xiaomi remotes for Mibox S1 (check the pilot look to be sure if thats for your pilot). No supports required during printing. I recommend to use screws to mount it to the wall, or some thick adhesive…
(english below) Wer nach einer Drybox mit rechteckiger Hygrometer- und Thermometer-Anzeige universell verwendbar für Filamentrollen, kleinere Drucke, Filamentreste/-proben und anderem sucht, wird hier fündig. Bei meinem Modell handelt es…
If you looking for storage up to three complete hotends of your MK4, this can help you. Box is designed to fit whole hotend/nozzle parts with silicone sock on , and straight (installation) cables with bend connector of heater and straight…
I designed this case for my Zynthian project. The electronics is partly derived from the V5 with an illuminated and 3D printed button matrix. The needed circuit information is on the Zynthian forum and github pages. I handwired it…
QidiBox drive gear replacement assy Print with PETG-GF or better (heat resistance ***IMPORTANT***) Tolerances are very small in order to make assembly solid on the shaft and bearing. This is a complete assembly, you will need to salvage…
An easy to print container for lead pellets that is easily sealed with a single M6 BHCS. When filled with 2mm diameter lead pellets this will weigh in the order of 826g, but final weights will vary depending upon what weight material is…
Layer height should be at least 0,15 mm or less. The example in the pictures is printed with a 0,08 mm layer height.
Additional accessory kit for the 3.4 litre "MultiBox" food container manufactured in Turkey (ean CODE 8694064003156). The kit makes it easy to store the filament in dry conditions, and to use it without taking it out of the box. The kit…
About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…
IT: Serie di scatole/organizzatori parametriche adattabili per qualsiasi situazione, disponibili in 3 dimensioni standard (Tab 1) oppure in dimensioni personalizzate contattandomi liberamente; disponibile con e senza nervature, con e…
v2.1 added (Jan. 2025): Another rework of the design. Optimized the sizes a little bit. There is now one “end holder” which sits in the back of the iBoxx with a “hidden” storagebox underneath it. Then there will fit 8 6-bottle racks for…
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
OmniBox Side Plate with 4 Keystone Jacks Omnibox Project.
Update 1.1 thicker Wall 1,5mm (old 0,95mm). Add another Socket.
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
This project box was designed to be a ‘look-alike’ for the Unibox 140 enclosure. External dimensions are approximately: 5.3 x 4 x 1.5 inches The Unibox 140 was used in making the time machine remote in the Back to the Future movie.
Replacement wing for Haiboxing 1/18th scale rc car, truck thing
This design allows you to tailor the case around the PCB instead of the other way around. easy to use and the separate front and back panel allows for changing controls without a complete case redesign. The main dimensions are those of…
This little box is great for keeping small treasures.
Blende für ein Fussboden-Thermostat. Ich glaube die Box wurde als OVENTROP Unibox plus bezeichnet.
Minibox for Element System Peg Board Tool Holder
Medikamentenbox mit 3x7 Fächern (2x2x1cm), Medikamentenzunahme einfacher planen
Printed with eSun PLA+ that makes them strong. I prefer them over small clips, even though they are much slower to print, as I need only a pair per box. Print vertically without supports with a brim.
Remix of the awesome case from John_Sinclair over at thingiverse . Widened the case to make room for an 30mm fan as well as a XL4005 step down buck converter! You can print with 3 perimeters & No Top or bottom layers to leave infill…
This is a short lower bay tray for the OmniBox to mount a BTT U2C (USB to CAN) board. Intended to be used in the middle bays with the extended tab towards the rear. Because of the green terminal block on the one end, you may find that you…
Terminal plat to accommodate bigger Ø7mm binding post
Omnibox on Github. The current MCU trays didn't fit the V2.5.2 board out of my CR-10 V3 - remixed to suit mounting pattern and position in-line with the dual 40mm fan setup for the back panel, and have the SD reader facing forward for the…
Börner Borner slicer multibox organizer
After testing, remixing, and trying various versions I decided to create my own. Adaptors that use pin mounts to attach to the holes on the cardboard were too restrictive by both hole size and spool diameter. This model is extremely…
Unscrew the stock mount and position same as pics Remove factory bolt and replace with longer m3 bolt screwed tightly in place of the factory corner bolt. m3 bolt in file must be metal 3d printed otherwise 3d printed in plastic will 100%…
Malá krabička, malý box na šroubky M2, M3, podložky a další drobotinu. Víčko je z běžné PET láhve. Závit M27 a stoupání 3mm. Měl by tam být “CocaCola závit”, ale nikde jsme nenašeli informace jaké má takový závit parametry. M27 je, ale v…
Printed in a generic white PETG - 0.2mm layer height Small changes to open the lid easier and changed size from the original. I've also added the fuzzy skin (in PrusaSlicer) to make it less slippery. Enjoy :)
Mount to hold a miboxer c4-12 battery charger on a ikea skadis board.
Here's a simple box that's been sized to hold all my favorite batteries in my flight case. SCAD file is included to make it easy to customize for your own battery preferences. I printed at .28 resolution and it came out fine. Print…
tv support to hang mibox s tv box on tv made with pla 95%filling took 8g and about 40 min feel free to use it /
What is this thing? This is a box for the board game called: Ghost Blitz (aka Geistes Blitz). Why did you make it? If you happen to have the board game, then you probably have a rather large box that is mostly empty space. This new box…
Beschreibung Der MiBoxer C4 Smart Charger ist mit einer Vielzahl von Batterietypen kompatibel, darunter Li-ion, IMR, INR, ICR, LiFePO4 und Ni-MH/Ni-Cd-Batterien in verschiedenen Größen. Diese Vielseitigkeit bringt jedoch eine kleine…
Omnibox Rear Plate Ender 5 Custom with JST SM panel mounts for stepper/sensor/ADXL/heater/fan cables. This allows for cable management and easy disconnection of cables for control unit maintenance. My wire management is: Top panel…
Carpibox es una caja organizadora y también es… Rotatoria porque gira sobre si misma para acceder fácilmente a los compartimentos. Apilable porque su encastre central permite superponerla con otras Carpibox ahorrando espacio sin perder…
Print in PETG with supports, must be a little bit flexible filament, then stick with double-sided tape.
This is my go-to calibration print for checking everything at once. After some testing with friends, I realized I needed to share this model, as it is really fun and challenging to print. If you want to test your profiles and printer then…
Feet remiexed from the shield.stl to make the micro sub a downward-firing one. The version B is to be used with shorter screws.
Hier handelt es sich um eine Ausrichthilfe für die hansgrohe iBox universal. Das Modell habe ich mir selbst erstellt da ich noch Libellen für eine Wasserwaage da hatte… Abmessungen der Libelle Ø 9,5x34mm von der Bucht oder Ali Benötigt…
This is Hexibase design, go see his original work!
Small boxes for the silicagel to fit into the Qidibox AMS original storage compartments. Can be easily sliding in and out to check and refill.
rpi BOX Category: Tool Holders & Boxes
Держатель на стену для мини уровня Milwaukee
thanks to @irgendeintyp for providing the base model!
Für meine bei Amazon gekauften Müsliboxen mit der Bezeichnung Vtopmart 4L habe ich eine Halterung benötigt, mit der ich diese unter der Tischplatte befestigen kann. Da ich keine passenden Entwürfe gefunden habe, habe ich selbst eine…
FlexiBox This 3D-printable toolbox features a modular design with three stackable trays, ideal for organizing tools, hardware, or small components, using 6x M3x30 screws . Each tray is designed for smooth inserting and stacking, and comes…
Eine Schale für Silica-Gel (Perlen) passend für die weit verbreiteten 4-Liter Vorratsdosen (zum Beispiel von AliExpress). Diese Dosen eignen sich hervorragend für die Aufbewahrung von Filamentspulen, da sie absolut luftdicht sind. Die…
This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. Important: Please note that the peg spacing and dimensions from the original design…
MuPiBox / Phoniebox / Musicplayer based on Raspberry Pi I use this for my 21-month-old as her music player, as I am planning to skip on Tonies https://mupibox.de/ – to learn more about MuPiBox in general https://phoniebox.de/ would also…
Multibox und Abdeckung für Gigant Hobel. Mit der Abdeckung kann man gefahrlos einen Einsatz am Hobel belassen. Die Schneidflächen werden geschützt und Verletzungen minimiert. Die Multibox ist sehr platzsparend und wenn die nicht…
OmniBox is a modular, 3D printed electronics case for controlling 3D printers. The goal of OmniBox is to make your printer's electronics as valuable and re-usable an asset as the printer it controls. Each control case is comprised of…
Simple wall mount for an Incra iBox. Print two, one for each side. I printed PLA with a .6 nozzle and a .4 layer height for speed, 3 perimeters with a 20% gyroid infill, which may be overkill but the jig is heavy.
Modèle d'un ensemble de boite de rangement. Les dimensions de la MiniBox 1.2 (LxHxP) : 124*62*100mm Toute les boites peuvent être fixé entre elle.
Recommended print settings PETG Nozzle: 0.4 Layers: 0.15 Infill: between 100% Perimeters: 3 Bottom/Top Layers: 5 SUPPORTS NEEDED Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about every make…
This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. This is the second version of this model, improved from an earlier model that was…
A small useful thing :) You surely need to dry your hands after aquarium plants trimming. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,3 Infill: 20 Filament: Fiberlogy PLA Purple…
Modèle d'un ensemble de boite de rangement. Les dimensions de la MiniBox 2.2 (LxHxP) : 124*124*100mm Toute les boites peuvent être fixé entre elle.
Because im using the subwoofer as part of 2.1 system where its standing vertical i had to move the hole for the terminal plate to the side of the housing. Ive also made a remix of the terminal plate for bigger binding post, see my other…
Premier modèle d'un ensemble de boite de rangement. Les dimensions de la MiniBox 1.1 (LxHxP) : 62*62*100mm Toute les boites peuvent être fixé entre elle.
My Son is a lefty, and wished that there was a left handed transmitter for his RC basher (that wasn't hundreds of dollars), so here it is! Original steering will mount just as it does on the original side. Printed in PETG with supports.…
