Counting matching models…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for PETGSource material: PET
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
This is the ideal Hexagonal NASA Chainmail model for FDM. I increased the thickness of the chain from 1.2~1.5 to 1.8(mm), making it easy to print and more than twice as strong while keeping the size of the original. I designed this to…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…
Print approx. €12.97–€15.86 excl. taxPreliminary estimate for one variant
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
English Update 2023-11-02: In the construction file, I removed a few minor errors that occurred when changing the depth. Update: Since PrusaSlicer can now also emboss text, I have added a print configuration file without text. So you can…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Print, fold and enjoy :-)
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
I found the files on Thingiverse and printed them for a friend. It is a working model engine (35% scaled) with parts color-coded... Sort of. It's really cool! This is NOT my original design, it is a make from Thingiverse. I do not know…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This enclosure is divided into multiple parts viz., Top, bottom, and buttons. The top and bottom half are held together with friction. No screws are required. NOTE: Please make sure to remove the SD Card before opening the case, or else…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Clean and nice looking cover for the original transport handles from the original Prusa Enclosure. makes the handles more stable and can also create a nice two color look if you print it in a different color than the handles itself. No…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to have a bed-mounted camera on my Ender 5 S1, but all of the premade ones I found didn't fit in one way or another. This should be compatible with any 2020 extrusion; I included holes in the side and bottom for locking it down…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Stand to place your DJI Pocket 3 safely on your desk.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
This insert for Wingspan fits the base game, the European Expansion and the Oceania Expansion in the base box. Its a tight fit, but offers still quick setup and a well organized table. The Box closes completely if the backs of the…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Yet another tool holder for the Original Prusa Enclosure. Already prepared to be extendable with some holes in the bottom to attach clips for example. If you want to mount it on the left side instead, just mirror it in PrusaSlicer. The…
Print approx. €8.18–€10.00 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D scan of the Uncle Jacob statue located at Disney's Haunted Mansion in Orlando Florida. Supports required.
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
The model has a slightly more ergonomic recessed grip and a cover of 5mm. The cover makes the lower screw a little more stable on the acrylic. You can use the same nuts and bolts that are used for the original.
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Use #17 or #18 sizes nails for the cable arches Use #4 screws for the cable clamp and large cable clip For the ziptie anchor I recommend double sided adhesive foam (affiliate link): https://amzn.to/3w16Kq6 You may need to use a glue stick…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
All available mounts for the C270 webcam somehow did not fit, interfered with something or where just too big, so I made my own. You'll need 3 M3x20 screws and nuts to assemble - because everybody who owns a 3D printer has those, right?…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…
Print approx. €5.64–€6.90 excl. taxPreliminary estimate for one variant
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start w/White, Green, Red, Black last. Quick Guide to changing filament~ Have some paper to…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
This also fits above the thumb screw of the filtration unit.
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
05/23/2024: Plant Saucer has been added *************************************************** This model can be print without any support and all parts can be print into a PRUSA MK3S+. For the “Pot spacer”, you could print 2 at the same…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
This modular insert allows you to store all the pieces of the tabletop game catan including the expansion Cities & Knights and the expansion to up to 6 players for the base game and the expansion. All parts can be printed as is, without…
Prusa enclosure Print resolution: 0.2mm Infill: 40%-70% Material: PET-G 6mm Plexiglas 1,2 m2, aluminium profile 20x20mm Supports: Yes ----------------------------------------------------------------- You'll need: Some PET-G filament 6mm…
Print approx. €41.38–€50.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix on some ideas I found for to move the LCD outside an enclosure for the PRUSA Mk3s. This specific remix allows the use of the original LCD mountings without needing to modify or reprint them. The one drawback to using the…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for PETGSource material: PET
A simple yet elegant and fast print Ravenclaw coaster for your hot or cold beverages.
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Balloon powered rocket launcher toy. You just need one balloon to take-off. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Rocket can be printed with 15% gyroid infill, but upper part needs 100% infill. Recommend to use 3mm…
This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
This Minecraft Lantern inspired model brings cozy pixely warmth to every home. Caution Never use real tealights, candles or other burning materials with this model. Best case they're starved of oxygen, worst case your home burns down.…
These new wheels for the original Prusa Lack Enclosure Spool Holder consist of 608 ball bearings (22 mm x 7 mm). Unlike other solutions here the filament spool rolls directly on the metal bearing surface minimizing noise, friction and…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
This enclosure is designed to fit perfectly an HC-SR501 motion sensor module such as this one .
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
Print approx. €12.26–€14.99 excl. taxPreliminary estimate for PETGSource material: PET
A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Snapmaker 2.0 touchpad holder T-rail mount for original enclosure (A150/A250/A350) Allows you to place the control touchpad on the enclosure and move as needed. You will need: Original magnetic touchpad mount (remains unused after…
When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
printed with: Prusament PLA Galaxy Black support necessary
Print approx. €7.55–€9.22 excl. taxPreliminary estimate for one variant
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
About This is a useful enclosure for a Meanwell LRS-50-5 PSU Power Supply. It serves two main purposes: Provides increased safety and protection, by adding an insulating cover (with ventilation holes) and leaving only the minimum required…
Enclosure (Housing and Lens) for LED strip. Designed for the i3 LED Light bar ends by SethBon https://www.prusaprinters.org/prints/3267-led-light-bar-prusa-i3-mk2mk3/files Print instructions Designed for printing fast (26 mins) with PETG…
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET
A very simple SSD enclosure, I used it to chuck 8 disks into a server chassis without any hassle. It holds 10 SSDs of 7mm (¼") thickness. Print with 10% gyroid/grid infill, no support.
This holder fits Prusa MK2/MK3/MK4 steel sheet size. It is not compatible with Prusa Mini or XL steel sheets. For mounting options, please see the the original model . Please note that you don't need to mirror this model whether you want…
Print approx. €2.98–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Enclosure for XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage Low Power Disconnect Output Board. Includes buttons, cover, base box.
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for PETGSource material: PET
Update V4: Closed a small gap in the bottom part. The plug of the PSU quick-release cable is not nice to look at with the exposed cables. It looks much nicer with a housing! Fits the MK3S+ and the MK4 version oft the cable. I know, there…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Red, Green Quick Guide to changing filament~ Have some paper to push away extruded…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
***german version below*** I really liked the versatility and simplicity of the original spool holder design od the Prusa Lack enclosure. But it had two disadvantages. It was quite noisy and it streched flex filament quite heavily while…
Filamnt changes: grey, l blue, gold, d blue, black
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Summary Ultra-compact and magnetic bit holder for every application situation. The bit can be inserted easily and won't fall out. Given .3mf file accepts widely used 6x2mm round magnets. Accepts any other sized round magnet (up to 18mm…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Everytime you're doing maintenance on your MK inside the Prusa Enclosure the PTFE tube for the filament will hang off right in the middle and is always in your face. Or you're using a MMU but still want to run single color prints off the…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
This is a small two-axis webcam holder to fasten inside of a printer enclosure. It requires no screws and the camera can be attached using the printed 1/4" camera screw. No screws are needed for the assembly. The parts have an…
Print approx. €6.64–€8.11 excl. taxPreliminary estimate for PETGSource material: PET
The adapters that are available are a disaster. Maybe on purpose to stretch our creativity and strength and create something nice for the community. So here I bring a nice holder that will certainly not offend anyone. All fasteners are…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
A holder for up tho three MK4 metal print sheets, attachable to the Original Enclosure. Features The slots for the sheets are offset not only vertically (as in many other designs out on Printables), but also horizontally. This facilitates…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for one variant
Prusa Lack Enclosure Corners/Cones if you are using a third table for height. Positively locates top two tables on 3rd.
Print approx. €10.58–€12.93 excl. taxPreliminary estimate for PETGSource material: PET
Timeless model of a kit card of three guitar plectra, such as to use it as giveaway for a guitar enthusiast or else. Includes step file to edit, add a name or else. They include a hole for keychain, see my other models for 3D printed key…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I wanted the fantastic Ultimulti MMU3 by @David standing on the top of the original prusa enclosure *. Therefore I had to modify the original frame clamp into a stand for flat surface that should not claim to much room of the limited top…
Print approx. €2.65–€3.23 excl. taxPreliminary estimate for PETGSource material: PET
It's designed to fit with the https://www.printables.com/model/252904-transport-handle-for-original-prusa-enclosure. It can fit 6 spools of 1 kg and it can accommodate 2 kg spools. For mounting use: 4 m3 nuts 2 18mm m3 bolts 6 12mm m3…
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Remix of the Top Plug Edge for original Prusa Enclosure with a hole on edge to allow a cord pass through. I needed a plug that allowed my USB cord to pass through and I didn't want to remove the USB end, so I remixed the model to have the…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
