Wyniki wyszukiwania: 24v

Sortowanie

283 modeli

P
PrintablesWP_Master

Helicopter Mi-24V Kit Card

I've made a kit card model of the helicopter I really like. This model can be displayed everywhere and can be great gift. Printing instructions: Layer height: ≤ 0.15 mm Infill: 100% Material: PLA (PETG might work too, but I have not tried…

Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu

Pobrania
2434
Polubienia
500
Ocena
4,78
P
PrintablesAXUL

Enclosure for XH-M609 Low Voltage Disconnect 12V 24V 36V Over-Discharge Protect For 12-36V Lithium Battery

The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…

Pobrania
711
Polubienia
52
Ocena
5

Flashforge Adventurer 5M (AD5M) LED mod accessory - buck converter MOUNT for inside back of printer (24v -> 12v inline, etc) v1.0

NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…

Pobrania
575
Polubienia
129
Ocena
5

Super Mario Kart Deluxe Kids Ride On 24V - Front and Rear Wheels

Update 03/24: While the original Version still holds up extremely well, I wanted to increase stability for the Front Wheels because there is quite some load on the original Wheel center rings. Those rings that come with the Kart are made…

Pobrania
474
Polubienia
47
Ocena
5
P
PrintablesPJ

Flex 24V Battery Mount

This is just a simple wall or tray mount for your Flex 24V batteries. The .f3d file is messy, and not really intended to be edited or terribly useful to remix, but the file itself works well. I've printed in a few different PLA's, and…

Pobrania
428
Polubienia
27
Ocena
0
P

Kobalt 24V Battery Mounts

This is the first iteration of a Kobalt 24v battery wall mount; it can be mounted anywhere, because it has the locking cutout made in it as it does on the tools themselves. There are also some easy-out mounts (ones that do not have the…

Pobrania
411
Polubienia
66
Ocena
0
P
Printablesfelixna

SOVOL SV06 PSU case cover for silent 92 mm fan and step-down converter (CHENGLIANG P360W24V)

This is a remake of my 70 mm PSU cover for the CHENGLIANG P360W24V used in the Sovol SV06 (https://www.printables.com/de/model/341847-sovol-sv06-psu-case-cover-for-silent-70-mm-fan-and). By using a 92 mm fan, the fan speed can be further…

Pobrania
399
Polubienia
71
Ocena
5
P
PrintablesCvamu

Tobsun 12V/24V to 5V cover

Cover for the Tobsun 12V or 24V to 5V converter found in the Voron 0 BOM. Is also usable for powering a Raspberry Pi on most 3D printers.

Pobrania
374
Polubienia
57
Ocena
5
P
Printablespixiewrangling

Dual Kobalt 24V battery wall mount

Wall mount for two 24V Kobalt batteries. Requires 2 screws to attach to wall.

Pobrania
362
Polubienia
45
Ocena
5
P
PrintablesJevermeister

TOBSUN DC-DC 24V/12V to 5V converter din rail mount

TOBSUN DC-DC 24V/12V to 5V converter din rail mount Based on the VoronUsers 2 channel relay mount and I also added the unmodified Voron 2 DIN rail clip for your convenience. This fits the DC-DC converters which are e.g. part of the Voron…

Pobrania
335
Polubienia
28
Ocena
5
P
PrintablesMochaMame

Elegoo Neptune 2S 24v Safety Cover

The cutout in the aluminum extrusion for the cables on the Elegoo Neptune 2S is a bit sharp on my printer and could cut into the wires if moving the printer around and modding. This cover snaps into the cutout and protects the wires.…

Pobrania
329
Polubienia
33
Ocena
5
P
PrintablesJEO

DeWalt or Harbor Freight Hercules Battery Powered Light (12V to 24V LED Light Bulb)

First, the original I modified is a very beautiful structure. Please check it out. I've bought battery backup bulbs before and when the power went out, they were not very bright. I made this for any power outage and with several batteries…

Pobrania
296
Polubienia
102
Ocena
0
P
Printablesmmuellerphoto

BTT UPS 24V DIN Rail Mount

This is a BTT UPS 24V Mount for my DIN Rail Bracket. You can find the bracket here ! For the UPS you need M3 flat head screws and M3 Nuts. For the DIN Rail Bracket Mount you need M3 countersunk screws. Due to the heavy load on the SSR and…

Pobrania
285
Polubienia
28
Ocena
0
P
Printableszdevlor1

Kobalt 24V inflater replacement o-ring

O-ring failed on my portable 24v inflator and i found the problem to be a bad seal on the pump. Its a tight fit but work. Use as many perimeters as you can and .16 layer height.

Pobrania
266
Polubienia
10
Ocena
5
P
PrintablesJacob Steeg

Kobalt 24v Tool Hanger

This is a little something I whipped up to hang my 24v Kobalt tools from the underside of a bench, or in my case some cabinets. Print Settings Rafts: No Supports: No Resolution: .2 Infill: 25% Notes: Designed to print standing upright…

Pobrania
264
Polubienia
47
Ocena
5
P
Printablesjonathon717

Beefy Din Rail Mounts for VORON, Octopus 1.1, Raspberry Pi 4, 24V and 5V Meanwell PSUs

BEEFY DIN RAIL MOUNTS These are Completely Overbuilt! They Require 1 purchased part - Link Below I made these mounts to solve the below issues from the Voron 2.4 r1. BOM STL files Will work on any 35mm Din Rail Mounted Setup These are…

Pobrania
244
Polubienia
25
Ocena
5
P
PrintablesDevious

Milwaukee M12 battery 12V/24V power supply

I'm working with 12V and 24V vehicles where I have to test single components. because I have a 12V Milwaukee M12 battery powered drill. I designed this handy power supply. Both parts can be printed without supports. Additional hardware:…

Pobrania
236
Polubienia
29
Ocena
5
P
Printablesmaxelman

Bambu X1C / P1P 24V AMS to 5V USB Power Box

I wanted LED lighting on my X1C but didn't want another plug. By powering off of the AMS I can use a single smart outlet for the whole thing. Works great! Use this box to bundle wires behind your printer and power lights directly from the…

Pobrania
234
Polubienia
162
Ocena
5
P
PrintablesMikRobi

Wind Turbine for hoverboard motor- Version 1.1 12-24V by MikRobi

Custom Designed Wind Turbine - Version 1.1 12-24V The following description will help you understand the plans for my custom-designed wind turbine. The project is based on a hoverboard motor, which serves as the generator. Most of the…

Pobrania
231
Polubienia
36
Ocena
5
P
PrintablesQuadView

Super Easy Prusa XL Buddy Venting Cover with 24volt Noctua Fan

My personal issue with my XL printer started a few weeks ago. This is my first summer with my XL and I am finding out that my garage is just too hot for the XL to work. When the temp gets up to 90ish, the printer has one of the sensors…

Pobrania
229
Polubienia
59
Ocena
5
P
Printablesfelixna

SOVOL SV06 PSU case cover for silent 70 mm fan and step-down converter (CHENGLIANG P360W24V)

This is a case cover for the CHENGLIANG P360W24V power supply from Sovol SV06, with a hole for a 70x70x10 mm fan and a step-down converter (LM2596 HW-411). There are holes for fusible nuts (M3 with 4.6 mm outer diameter). Unlike the…

Pobrania
228
Polubienia
68
Ocena
5

LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry

LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…

Pobrania
223
Polubienia
34
Ocena
5
P
Printablesfelixna

SOVOL SV06 PSU case cover for silent 80 mm fan and step-down converter (CHENGLIANG P360W24V)

After I made the 70 mm and 92 mm Version of the PSU fan case, I got a request for a 80 mm variant from PatrickE which is exactly this one. I did not test it myself, but PatrickE confirmed that it fits and also provided the pictures, thank…

Pobrania
215
Polubienia
31
Ocena
4,67
P
PrintablesUko

24V to 5V (Coax+USB) Buck Converter Case/Mount

A case/extrusion mount for LM2596S 24v+Coax to 5v+USB buck converter.

Pobrania
206
Polubienia
16
Ocena
4,75
P
PrintablesMicceB

HCW-P715 12/24V to 5V USB Buck Converter Case

A case for the HCW-P715 USB 5V/5A converter wich can be used to power the Raspberry Pi or Creality Wifi-box directly from the printer power supply. Made to be mounted on the 40x40 Aluminium profiles with 3mm T-nuts. One version with a…

Pobrania
206
Polubienia
35
Ocena
5
P
Printablesijmwi

Kobalt 24v Blower Short Nozzle V1

I'm working on a short nozzle for the Kobalt 24V blower (Model #KHB 4224A-03) to use while drying cars. I needed something quickly, so I just designed an attachment that attaches to the tip with an interference fit. The current iteration…

Pobrania
206
Polubienia
28
Ocena
0
P
Printableskilinccagatay

ATX Power Supply to 24V Lab Power Supply

This is a remix of a remix. You need to specify the filament change layer or you can paint the letters. You will need; ATX Power supply Digital Ammeter - Voltmeter (…

Pobrania
199
Polubienia
24
Ocena
0
P
PrintablesChazzerB

Kolbalt Extended Run 24V Battery Holder

Simple Kobalt Battery Holder specifically designed to hold an extended run battery. I angled it and made it a little loose for easy access. Printed in PLA, 15% infill, triple wall.

Pobrania
197
Polubienia
44
Ocena
5
P
PrintablesJacob Steeg

Kobalt 24v Battery Mount

This is a small holder made for Kobalt Batteries. It complements my design for a tool holder for 24v Kobalt tools. It will mount your tools and batteries under a cabinet or bench. This is optimized to print without supports. Simply print…

Pobrania
193
Polubienia
24
Ocena
0
P
PrintablesRich T

JZK HW-688 Buck Converter 4040 profile mount - 24V/12V to 5V 5A USB

An enclosure for a JZK HW-688 Buck Converter (24V/12V to 5V 5A USB) Designed to mount on the 4040 profile of an Ender 3 directly underneath the Enders power supply for easy wiring but can also be mounted at the front of the printer next…

Pobrania
193
Polubienia
10
Ocena
5
P
PrintablesDiyGolfGuy

24V Ride on Gear

This is a Working Gear for the 24V UTV ride on. If you have a 24V ride on you know what gear this is as it is always the one to go. I could not find on that Printed well so I made this on in 2 separate parts. you can print this as 2 units…

Pobrania
188
Polubienia
12
Ocena
0
P
PrintablesGsimon

Delta PMZ-24v240WDAL

Delta PMZ-24v240WDAL PSU for the Prusa i3 MK3s+ (The black version) You can use this STEP model as a base start for any modification/upgrade.

Pobrania
177
Polubienia
16
Ocena
5
P
PrintablesKG7BTU

FLEX Power Tools 24V Battery Holder

This simple battery holder was designed with the intention of mounting under a cabinet with two #6 flat head screws. Its intended to fit FLEX Power Tools branded 24V batteries. Printed standing up on it's end, it will use minimal support…

Pobrania
173
Polubienia
17
Ocena
5
P
Printablesjohn mcalpine

kobalt 24v to 18v ryobi cordless tool battery adapter adapter

Print this bottom to allow integration of a kobalt 24V battery to the 18V ryobi tool. Use the top part from the linked model for the RYOBI half. For terminals on the kobalt half Use spade terminals or appropriate ring terminals and…

Pobrania
166
Polubienia
27
Ocena
5
P
PrintablesPartovic

Speedport W724V to Fritz!Box 7590 Wall Mounting Holes Adapter Plate

This is a wall mounting plate adapter that I've made due replacement of my old Speedport W724V. It was mounted on the wall by two screws. For the new Fritz!Box 7590 I didn't want to drill new holes, so I decided to make an adapter plate…

Pobrania
165
Polubienia
10
Ocena
4,75
P
Printables3DXGear

HiLetgo 24V/12V to 5V/5A Power Module DC-DC Step-Down Power Supply Converter Case

Case for HiLetgo 24V/12V to 5V/5A Power Module DC-DC Step-Down Power Supply Converter Case Link: https://www.amazon.es/dp/B07X5H4M42?ref=ppx_yo2ov_dt_b_fed_asin_title Printed with support. 2 cases were made since one of the PCB had a…

Pobrania
164
Polubienia
14
Ocena
5
P
PrintablesJames Kiely

Bambu X1C / P1P 24v AMS to 5V USB power box Remix

I Simplified the design from 3 pieces to 2 pieces and made it better fit the USB terminals.

Pobrania
153
Polubienia
70
Ocena
5
P
PrintablesDanAndersen

60x25mm Fan Mod for Cheng Liang P360W24V Powersupply - TwoTrees Sapphire SP3

Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…

Pobrania
149
Polubienia
18
Ocena
5
P
Printablespd0722

Flex 24v battery mount

Battery mount for the Flex 24v batteries printed standing up with tree supports for the small overhang

Pobrania
144
Polubienia
6
Ocena
0
P
PrintablesCtowns5

Snowjoe 24v battery adapter

There are many tool battery adapters available here but I couldn't find one for my sun/snow joe 24v batteries. So I made one. It lets me run a 24v inverter or several other things. Anyway, it makes these batteries more useful to me. If…

Pobrania
128
Polubienia
11
Ocena
0
P
PrintablesRetrust

Prusa MK3S 24V PSU holder ikea lack enclosure perfekt!

Habe keine Halterung für die linke Seite eines Ikea Lack Tisches gefunden. Habe selber eine erstellt. Viel Spaß beim drucken! Print instructions Habe es mit 0,2mm Layer high gedruckt. Ohne Support.

Pobrania
119
Polubienia
27
Ocena
4,75
P
PrintablesNiXXiN

Ender 3 Pro - Meanwell LRS 350 24V PSU Fan Cover 80mm

I changed the original file from joloman2 to have a fan guard and a base for the fan in order to screw it in the right direction without the trouble of the fins hitting the fan guard. I used a Noctua NF-R8 redux-1800 and i honestly cant…

Pobrania
112
Polubienia
10
Ocena
0
P
PrintablesJambez

24V 10A PSU Safety Cover

Overview: This is a power supply cover/enclosure to contain he wiring, electronics, and input/output connectors for a 24V AC to DC power supply. It allows me to safely convert electricity from the wall (230v) to 24v DC power for all of my…

Pobrania
105
Polubienia
38
Ocena
0
P
Printablescrasbe

Remix: SOVOL SV06 PSU case cover for silent 80mm fan and step-down converter (CHENGLIANG P360W24V)

This is a remix of felixna's model with an added slot for the fan's cable as suggested by Thomas Albrecht in the comments of the original model. The notch is measured from a Noctua Redux fan, but it should be very similar for most fans.…

Pobrania
105
Polubienia
19
Ocena
0
P
PrintablesRESTLESS DESIGN

24V LED Driver Enclosure

The .3mf file does not contain the covers for the mounting bolts (these are the little “bumps” you can see on the top of the enclosure in the image). You will need these to prevent touching the bolts!!! Do not print and install this model…

Pobrania
101
Polubienia
11
Ocena
0
P
Printables1CM69

BTT UPS 24V V1.0 Case

Just a basic box to enclose and mount the BTT UPS 24V v1.0, knowing me I have probably over engineered this ;) To secure the base part to extrusion use 2x M3x8mm machine screws with 2x M3 T nuts, maybe a thin washer too. Fit the UPS to…

Pobrania
100
Polubienia
6
Ocena
0
P
PrintablesJesse Lamba

24v Aux power supply for Bento Box with Remote

Greetings Everyone! Like many of you, I printed myself a Bento Box filter to keep VOCs from entering my lungs. The only thing I wasn't sure about was how to power the fans. So with that in mind, I decided to learn enough CAD to create my…

Pobrania
100
Polubienia
21
Ocena
0
P
Printablescrazybob1215

Greenworks 24V Battery Mount

This is designed to be mounted to the underside of a flat surface (eg. a table, a shelf, etc.) using screws. The holes are sized for #10 screws.

Pobrania
99
Polubienia
9
Ocena
5
P
Printablesssombra

24v PSU cover

I changed my PSU for a 24v 15a one and I designed this cover. I am using the following PSU: https://www.amazon.com/gp/product/B0146IAXYO/ref=ppx\_yo\_dt\_b\_asin\_title\_o08\_s00?ie=UTF8&psc=1 Regarding the socket, I don´t have a link but…

Pobrania
99
Polubienia
9
Ocena
0
P
PrintablesMcMaker3D

Kobalt 24V Trim Router Base Plate

I was unable to find a base plate that would work with my Kobalt 24V Trim Router, so I decided to model the one that came with it. I plan to design additional attachments following the bolt pattern for this router. The eventual goal is to…

Pobrania
91
Polubienia
20
Ocena
0
P
PrintablesUGhpbAo=

Bosch 24V Makita CXT Battery Adapter

I have an old 24V Bosch SDS Drill with a failed NiCad battery. Rather than rebuilt the existing battery I designed an adapter to hold two 12V Makita CXT batteries. The pictures show an earlier design, this design brings out all the…

Pobrania
88
Polubienia
9
Ocena
0
P
Printablesmfetting

BL LED Case with 24v Power Tap

Works with Bambu Lab X1, X1C, and P1P printers. Uses two (2) Bambu Bus Cables. Items Needed to Construct the BL LED with 24v Power Tap: BL LED for sale at dutchdeveloper (Etsy Store) Power Tap Kit and extra Bambu Bus Cable for sale at…

Pobrania
87
Polubienia
19
Ocena
5
P
Printablesmartona

DeWalt DCB107 24V Charger Mount for Honeycomb Storage Wall

Print the mount and three of the inserts in the attached STL orientation.

Pobrania
86
Polubienia
21
Ocena
0
P
PrintablesMfox1420

24v Ride on Jeep Gear

Designed after kids stripped out the factory gear. I used PLA to test and it worked until it didn't while waiting for warranty replacement. Printed with 5 walls and 30% gyroid infill. .15 layer height.

Pobrania
79
Polubienia
6
Ocena
0
P
PrintablesEmmet

18650 grid for building batteries. 7S5P - 24V battery

Holder for batteries made from 18650 cells

Pobrania
78
Polubienia
10
Ocena
5
P
PrintablesAlexey H

12-24V Car Power Socket Cigarette Lighter Socket bottom cap

12-24V Car Power Socket Cigarette Lighter Socket bottom cap for usage outside of the car - I used it for external battery with xt60 plug

Pobrania
77
Polubienia
2
Ocena
0
P
PrintablesMogu1lito

E3PRO Meanwell LRS 350 24V FAN COVER (92x25, 92x14, 80x25)

Just another PSU fan cover for E3PRO Meanwell LRS 350 24V. I did not like any model so I made this one from scratch with some Witcher features, but uploaded “classic” version for not Witcher fans. Use supports. Tested with 92x25mm Noctua…

Pobrania
74
Polubienia
17
Ocena
5
P
Printables3DPrintBurgas

Sander / Polisher 24V

DC powered electric sander / polisher based on RS-555SH 36mm 12V 24V High Torque DC Motor. Attachments are easily exchangeable when sandpaper of different grids is required. Just print a few sets of them and equip each with different…

Pobrania
73
Polubienia
26
Ocena
0
P
PrintablesAbász

BIGTREETECH BTT UPS 24V V1.0 Case

This is a case for the 24v BTT UPS with holes to fit it to a 40x40 v-slot with t-nuts. Printing is straight forward, no supports needed but the orientation of the lid should be turned upside-down.

Pobrania
73
Polubienia
4
Ocena
0
P
PrintablesRad Racer

Robust Li-ion Battery Pack - 24V

This battery pack was designed and built to run my compressor cooler. I wanted a battery pack that could be carried in the back of a SxS and not worry about power cords or connectors getting broken (no cords, flush connectors). The design…

Pobrania
72
Polubienia
13
Ocena
0
P
Printablesniak

XY-3606 DC 9V 12V 24V to DC 5V 5A Buck Converter Mount

Mount for DC 9V 12V 24V to DC 5V 5A Buck Converter

Pobrania
71
Polubienia
5
Ocena
0
P
PrintablesSierraThePotato

BIGTREETECH BTT UPS 24V V1.0 Case

Remixed this case, so it doesn't need additional hardware to mount to the V-slot, and moved the mounting part to the back, so the factory signal cable is long enough. Changed the position of the holes, so stuff - mainly filament - won't…

Pobrania
70
Polubienia
10
Ocena
0
P
PrintablesPrintHex

SNAPMAKER U1 improved Motherboard 24V fan

Hello, I decided to remix the linked model because I didn't like the 24v to 12v converter as the system is powered in 24V and the mainboard has two V- and two V+ terminals. So I remixed the 3D design to fit a 80*80*15mm fan (found on…

Pobrania
69
Polubienia
13
Ocena
0
P
Printablesspoonwzd

BTF-Lighting A24V10A PSU Case & Controller Mount

Overview Designed with precision and robustness in mind, this protective case is specifically tailored for the BTF-Lighting A24V10A PSU and controller. Its hefty structure, with 1cm thick walls, ensures unparalleled protection for your…

Pobrania
69
Polubienia
13
Ocena
0
P
PrintablesPavel

USB step up / Down, Napájecí zdrojový modul DC-DC 5V až 3,3V / 12V Nastavitelný výstup DC 1.2V-24V

USB modul https://www.aliexpress.com/item/1005007439875485.html?spm=a2g0o.cart.0.0.457738da0Q5hBN&mp=1

Pobrania
68
Polubienia
8
Ocena
5
P
Printables豉諗彈

24V 82A DUAL HP DPS-800GB Power Supply Housing

BOM: 1no. HP DPS-800GB Server Power Supply. (12V output) 1no. DC GND Isolated HP DPS-800GB Server Power Supply. (12V output) 8nos. 213mm x 12.8mm width x 2mm thk. Alum. bar. (support bar model.pdf) 16nos. m3 x 6 screw. 1no. DC 50A LCD…

Pobrania
67
Polubienia
9
Ocena
0
P
PrintablesDynamite

Ender 3 Pro - Meanwell LRS 350 24V PSU Fan Cover 90mm

Yet another Ender 3 Pro fan cover, based on a 90mm fan and i use inserts M3 for mounting the fan internally. Use supports for overhanging part.

Pobrania
66
Polubienia
11
Ocena
3

Kobalt 24V impact or drill holder

Remixed existing design and scaled.

Pobrania
66
Polubienia
15
Ocena
0
P
Printablesideenwerk.me

Public smartphone charging station, wall mounted, for 12/24V automotive sockets

purpose We developed this charging station to offer free phone charing for people on the public square next to our maker space. Two large smart phones can be charged simultaneously laying on the top front. Providing QC3.0 and PD even…

Pobrania
65
Polubienia
15
Ocena
0
P
PrintablesPJ

Flex 24V 4 Battery Carry Caddy

4 Bay Battery holder meant to be carried.

Pobrania
65
Polubienia
6
Ocena
0
P
Printablesharrymc154

24V Motor Mount

I used PETG, so the heat of the DC motor doesn't deform the print. PLA could still work; obviously, don't let the motor get too hot. Printing is easy and supports come out quickly. Required: Print at a 0.2 Layer Height Print with 30%…

Pobrania
64
Polubienia
11
Ocena
0
P
PrintablesPaul Lacatus

Case for SMPS 24V/20 A for LiPo charger

I have designed a case for a standard SMPS 24V 20 A to be used for a LiPo charger . It is in two parts each part secured by screws in the SMPS . There is plenty space for venting and cooling in the case

Pobrania
64
Polubienia
9
Ocena
0
P
PrintablesMeki

Cheng Liang P360W24V PSU 92mm fan mod

This is a 92mm fan mod for the common Cheng Liang P360W24V power supply. The assembly requires you to have the following items: 4x M4x30 or M4x40 (with spacer) flat head machine bolts 4x M4 washer 4X M4 nut 92mm fan optional mesh for 92mm…

Pobrania
61
Polubienia
3
Ocena
0
P
Printablescwaters

Kobalt - 2 x 24v Battery Carrier

This is a carrier for 2 Kobalt 24v batteries. This requires the use of these locking holders. It requires 4x M4 heated inserts and 4x M4 button head bolts. This version requires support for the handle. .step file included for modification.

Pobrania
59
Polubienia
16
Ocena
0
P
PrintablesTheMagicD

Sovol Sv04 Fan ducts for 5015 24v fan

These have the same internal geometry but have different screw hole positions for them to line up with the nozzle. This does not decrease your mirror or copy print space The right fan duct needs to have 2x spacers printed but the left…

Pobrania
58
Polubienia
10
Ocena
0
P
PrintablesSeaSpotter

24V power supply (Labornetzteil)

Customized version of http://www.thingiverse.com/thing:1264391 24 Volts Power Supply BOM Printed Parts DPS3005 Voltage regulator from Aliexpress (…

Pobrania
58
Polubienia
5
Ocena
5
P
Printablestatutsa888

Ender 3 Pro Rear Case for BTT SKR Mini E3 V2.0 + BTT UPS 24V (Remix of ADKS Case)

A rear electronics case for the Ender 3 Pro, remixed from the ADKS Ender 3 rear case (Thingiverse thing 4622318). The original design is ADKS's work: I resized it so the BigTreeTech UPS 24V module fits next to the SKR Mini E3 V2.0, and I…

Pobrania
57
Polubienia
12
Ocena
0
P
Printablesemguepo

BIGTREETECH Cover Relay V1.2 & UPS 24V V1.0 for Ender 3 Pro

BIGTREETECH Cover Relay V1.2 & UPS 24V V1.0 for Ender 3 Pro with Dual Z, TFT35 E3 V3.0 and SKR MINI E3 V2 .3mf Files Cover Relay & UPS_1 Cover Relay & UPS_2 Cover Relay & UPS_3 Cover Relay & UPS_tapa

Pobrania
57
Polubienia
6
Ocena
0
P
Printablesmfetting

BLLED Extended Plus Case with 24v Power Tap

Works with Bambu Lab X1, X1C, and P1P printers. Uses two (2) Bambu Bus Cables. Items Needed to Construct the BL LED with 24v Power Tap: BLLED Extended Plus for sale at dutchdeveloper (Etsy Store) Power Tap Kit and extra Bambu Bus Cable…

Pobrania
56
Polubienia
8
Ocena
0
P
PrintablesNalif

Enclosure for Dig-Uno and Mean Well LRS-100-24v

I created this enclosure to hold a Dig-Uno and a Mean Well LRS-100-24v. It features cable strain relief and has a removable lid. It was designed with the following hardware below in mind; the step file and Fusion360 f3d file are provided…

Pobrania
56
Polubienia
6
Ocena
0
P
Printablesseed49

Box for power supply 24V 1A S-24-24 (for Led Strip)

Box for power supply Box 24V 1A S-24-24 (for Led Strip) Switching power Supply 24V 1A 24W (https://fr.aliexpress.com/item/1005006053980254.html) 2 M3x6 2 M3x4 4 M3 L3 OD4.5 insert

Pobrania
55
Polubienia
9
Ocena
0
P
Printables4sStylZ

Alfa 916 24v Badge

A 24v badge replica of the OEM Alfa Romeo 916 GTV or Spider. This is not a perfect replica, but rather a close one.

Pobrania
55
Polubienia
0
Ocena
0
P
PrintablesCqcomber

Meanwell rsp-500-24v mount for external enclosure

I used 10% infill. Use more if you want. im using this to mount the psu externally to my enclosure for my ender 5 plus. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Infill: 10 Filament:…

Pobrania
54
Polubienia
6
Ocena
0
P
Printablesonkelpit

Prusa Mini PSU Holder Mean Well 24VDC/6.67A

Just my design of a PSU Holer for the Prusa Mini. Mounted the PSU on my IKEA Lack Enclosure. Could be used as Holder for many more things. Print instructions I used black Geeetech PLA with the 0.25 DRAFT settings from PrusaSlicer on my…

Pobrania
53
Polubienia
7
Ocena
5
P
PrintablesWill

Relay Case for 2x 24v relay

i used m3 stand offs to mount the relay to the bottom and then m3 screws to mount top to bottom prints fine no supports at 0.2mm layer height. printing more than that in layer height might cause slicer to miss the sacrificial layer in the…

Pobrania
53
Polubienia
5
Ocena
0
P
Printablesbulbasaur0

Kobalt 18v / 24v vacuum (cordless shop vac) latch and hinge

Description This is a replacement latch, hinge, and screw plate for the main canister latches on a Kobalt cordless shop vacuum, by joshtelcom on Thingiverse . joshtelcom's model lists this as for the Kobal 18v vacuum. This fits my Kobalt…

Pobrania
53
Polubienia
10
Ocena
0
P
Printablesv.saichuk

TURBO AIR FAN 24V

I created a model TURBO AIR FAN, the task was to make the battery last as long as possible, be convenient, and powerful. I used old laptop batteries, 18650, in a quantity of 6 pieces. The result turned out very good, TURBO AIR FAN blows…

Pobrania
52
Polubienia
22
Ocena
0
P
PrintablesGreySiD

Ender 2 Pro custom PSU box (300W 24V and 15W 5V) / корпус для блока питания 300Вт24В и 15Вт5В

Корпус для блока питания на 300Вт 24В для питания принтера и 15Вт 5В для питания orange pi (для клиппера) Понадобится: Вплавляйки M5xD7xL4 - 2шт Вплавляйки M4xD6xL5 - 3шт Вплавляйки M3xD5xL3 - 15шт Вентилятор 60*60*10 5V - 1шт C14 розетка…

Pobrania
51
Polubienia
18
Ocena
0
P
PrintablesS. Lee Gooding

Peg Perego Ride On Wheel Driver Insert Adapter for 24v (6 gear motors)

I upgraded my Peg Perego John Deere Gator XUV ride on car to 24v. The upgraded motor has 6 gears and requires an adapter to connect to the factory wheels. This model will attach to the motor and connects to the red inner wheel driver…

Pobrania
50
Polubienia
3
Ocena
0
P

10" Rack Netgear 24V Power Supply Shelf

10" Rack Netgear 24V Power Supply Shelf

Pobrania
50
Polubienia
7
Ocena
0
P

Caixa Para fonte 12V e 24V

Para quem gosta de fazer upgrades em suas máquinas aqui está uma ótima opção. Para aqueles que gostam de colocar aparelhos externos em sua impressora e precisam de uma alimentação de rede, aqui temos uma linda caixa de fonte chaveada.…

Pobrania
50
Polubienia
3
Ocena
0
P
Printablesdhiltonp

Camlock for Kobalt 24V Max Orbital Sander

@PeterH has a convenient camlock connector for vacuum hoses . This adapter locks on to the Kobalt 24V Max Orbital Sander . My model number is KOS 2450B-03. Normally, it has a huge end for the vacuum bag to attach to. This replaces that…

Pobrania
50
Polubienia
12
Ocena
0
P
PrintablesPavel
Pobrania
49
Polubienia
11
Ocena
0
P
PrintablesSzwalkiewicz

Cheng Liang P360W24V cover

A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…

Pobrania
48
Polubienia
3
Ocena
0
P
PrintablesJames J

ABI 24V 500W Power Supply Cover Plate - REMIX

This REMIX of mrpaulwoods design uses a different switch assembly. v1 has a horizontal switch, v2 has a vertical switch. Both v1 and v2 have mounting wings. Purchase Items: ABI PSU - https://www.amazon.com/gp/product/B01IU8QBCO Switch…

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesFyrby Additive

Prusa XL Buddy Cover For M4 Inserts & 60mm 24V Fan

🟩 🟦 🟦 🟪 🟥 🟧 🟨 I wanted to run a 60mm 24V fan as I don't really want a cheap buck converter in my printer and also use M4 inserts to mount it, so I made this little remix. I also found the STEP file of the original did not have space for…

Pobrania
47
Polubienia
11
Ocena
5
P
PrintablesPascal Heitz

Box for 24V Power Supply Unit

24V Power Supply Unit: https://www.amazon.de/dp/B09ZV689CS There is a gap around every face of the PSU, to allow good ventilation.

Pobrania
46
Polubienia
3
Ocena
0
P
Printablespepson

Kobra Go PSU (Chengliang P400W24V) Hex Cover for Noctua 6025

I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…

Pobrania
45
Polubienia
3
Ocena
5
P
PrintablesZach Blett

Kobalt 24V Tool Wall Mount

Printed with a 0.6mm nozzle at 0.3mm layer height, 15% gyroid infill, painted supports under the flexy tabs that help keep the tools secure.

Pobrania
43
Polubienia
9
Ocena
0
P
PrintablesDominik Pechac

24V Li-Ion battery replacement for UPS (18650, 7S6P)

This battery uses 7S6P configuration with 18650 cells and DALY 7S 20A BMS. To assembly the box, you will need some screws and square nuts. For terminals, I used low profile torx screw and self locking nuts with some washers.

Pobrania
42
Polubienia
10
Ocena
0