143 modeli
My touring/commuter bike has run out of handlebar space, with a bell, Garmin mount, and cross-levers already installed. To mount I light, I had to forfeit a place for my hands and just wrap the light around the padded bar-tape. But I kept…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gwr 57xx 5700 class model rail model train british rail steam locomotive tank engine
Motivation (english) I use the MIK system on my bike, which allows you to clip anything onto the rack. But it is annoying that you cannot use the MIK adapter plate with Ortlieb pannier bags at the same time. The design of the MIK adapter…
I've designed it based on the "I DREAM OF JEANNIE" bottle, as a gift to a friend who loves that bottle. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Resolution: 0.2 mm Infill: 0% Notes: VASE MODE! cork is 2perimeters,…
These are spring-loaded clips for a bike bag, similar to ortlieb's style, for DIY bicycle panniers. I made it parametric and uploaded hooks ("hook" "latch") and bottom clips ("leaf") for different diameter rack tubing. The diameter in…
Universal Pannier Rack / Plate For my "older" motorcycles (80s and 90s) it is difficult to find pannier racks / luggage racks so I created an individual and universal plate. In the nexts weeks I will create some mounts to use it with…
These clips are ment for the Ortlieb panniers with the QL1 / QL2 klick system. https://www.ortlieb.com/de_en/ql1-ql2-hook-inserts The originale ones come in the sizes 8mm and 11mm to fit the Bike rack. These here are designed for Bike…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Slightly redesigned compatible pannier hook for ortlieb bike bags. Fits smaller bike rack rail without adapter.
I have upscaled the excellent design created by "AgepBiz" from S-gauge to gauge 1 (45 mm track width, scale 1:32). The original design was scaled up to 196%. Two half floor parts are merged into one part. Original Marklin Gauge 1, or LGB…
This simple item solves the problem of hanging a backpack on your bicycle rack without using additional straps, panniers, or anything else. Small, lightweight, easy to print and does the job. Perfect if you are picking up your kids from…
A solution to mount unstable panniers to the wall and free up some room. I personally used an extra piece of wood to prevent having to drill 8 holes in the wall but it is not mandatory. I have not tested the mounts under load as I only…
These are designed to turn backpacks and reusable tote bags into usuable panniers. I have been using them for about a year and have only had to replace the hooks once (printed in PLA, would probably last longer in something tougher).…
Wall mount for a bicycle pannier bag (like Ortlieb). The mounts allow you to store or load panniers off the bike. Mounting keeps the panniers off the ground, which reduces abrasion on the fabric and prolongs the bag's life. It also keeps…
This is a reverse engineering of a product by www.pannierhooks.com, given I don't live in the USA this would have been quite costly to get it imported and an unpleasant experience overall, I have used this with PLA+ and it has been very…
Yamaha TDM 850 (3VD/4TX) Gepäckträger/-brücke mit Halterungen Der Träger basiert auf meinem Universal Träger ( https://www.printables.com/de/model/392577-universal-pannier-rackplate-motorbike-universal-ge ). Die Halterungen sind für eine…
This is a pannier bag clip I designed for making some DIY pannier-mount shopping bags for the rear rack of my bike. There are various other options about, but of course one always has their own vision, so I'm happy to contribute mine to…
Simple Holder for a Kryptonite M18-WL U-lock. Fits over a 16mm Pannier tube. 3x M6x30 Bolts & Nuts required. Printed in ASA.
A fixed width back plate for dylan's pannier hooks. Allows the hooks to be used on a fabric bag.
Working on a "I Dream of Jeannie" Bottle. This is my first go at this model and I expect it to change some, so far I like it. I tried to get this designed so the bottle will not need supports. You will need supports for the lid. I have…
I lost a few spacers because my bike rack has a little nose which pushes the spacers through the mounting on the panniers when it gets bumpy. My solution is a small collar, which prevents the slipping of the spacer. Works very well and is…
cartel para poner led dentro con letras Annie.
💬 Description: I started cycling to work and had to take my macbook somehow. Didn't want to buy a proper bike side-bag so i crated those (actually reverse-engineered from a picture but who cares). Leave a pic and cycle safely! made for…
Stephen King's Rose Red - Annie - 2002 3D printable model.
I've designed this to attach my Specialized Stix taillight to my Tortec Velocity Hybrid pannier rack which has vertical holes 19mm spaced. It is quite short as this is a narrow rack but should fit on any racks which have the vertical…
the roof on the models is attached to the windows and slides out with some convincing. These are designed to sit on top of the weight molding and can slide right in. For the interior, I used luggage from…
tank engine and coach oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
I recommend printing the “no support” version. These are two inserts that need to be cut apart at the notches after printing. Remember to turn your part cooling fan on during bridging. The print needed some cleaning afterwards to fit…
ABS recommended since it's going to be used outdoor under mechanical load (PETG is going to work as well) Try to print with minimum possible layer thickness and infill density of +80% (at your own convince, considering the printing time)…
Materials tried ABS. NOT USEFUL. AVOID. It has this horrible problem where the perimeters will split apart under load. This could result in your bag falling off when riding PLA. Better than ABS, will support more load but fails pretty…
Motivation I wanted to use my backpack as a pannier on my bike rear rack and found a few solutions online that involve drilling through the backpack strap or bolting some clamps to the straps. I wanted something that wouldn't require…
This is a replacement bottom edge guard for an Ortlieb pannier. Mine broke after I didn't clip my pannier to my rack properly, overloaded it, and it got caught in the rear wheel. The broken original part is shown in the last photo. It has…
This is the 7th iteration or so of the bicycle pannier hook design! Printed and tested in Siraya Build resin, should work with most tough resins. Not designed for FDM printing, but may work if you orient correctly. Two hooks tested to…
A base plate to fill the reflector space on the GT - print this then stick a Suzuki badge to it. The badge I used was from eBay, item number 184397274069 Print this in PETG to reduce the risk of it melting, but be aware it may not cope…
Iconic Movie Moments - Annie Hall - The Balcony Date - 1977
Designed to prevent my pannier bag ( Ortlieb Commuter Two Urban ) from bending into the spokes of the wheel when fully loaded. Included Fusion 360 file, as you will almost certainly need to adjust parameters, unless you have the exact…
I recommended increasing to 150%
I liked these wall mounts for panniers best of all I came across, but I needed them to fit a 10mm aluminum rod and feature a continous hole for the middle support. Mounted it with 70cm rods to offer room for two panniers side by side. The…
Compatible with this model: Royal Enfield Interceptor 650 (19-23) SHAD SR Pannier Fitting Kit SKU: R0NT69SR Print in 100% infill with ASA for strength and UV resistance.
I used a heavy duty reusable bag with an internal piece of coroplast as a stiffener - these clips were sewn on with heavy button thread. These clips are good to a static 20-30 lbs each, but if you're hitting bumps on your way home I'd…
This is a buckle that fits into the Ortlieb bags. I used it as a replacement for a buckle on a Ortlieb bike pannier strap. A one part version of bustamania's Ortlieb buckle . This version can be used if your buckle is not sewn in and you…
I wanted to attach a set of 16L panniers that used the Ortlieb QL3.1 Mounting System to the Specialized Pizza Rack on my bike. I was able to attach QL3.1 system, but the lower mount of of the QL3.1 system the bag too close to the disk…
Added to Prusaprinters.org as a contest submission under “Wall Hooks”. While clearly a stretch to the term “Wall”, this is nonetheless a very useful hook for those with vintage or secondhand Karrimor Pannier bags with broken hooks. ⚓ More…
Here is a mount to hold D locks onto your bicycle's pannier. When you have the lock's shackle removed, simply slide it through two or more of these and re-lock it. Nice and secure! You will need: M3 Nuts M3 x 10mm (minimum) Screws TPU,…
Clips onto 8mm aluminum bike rack. Sew on with very strong thread. I used a heavy-duty nylon thread. Should have pretty good retention and easy removal. Remove by squeezing the thumb lever while pulling up. You don't need to squeeze it…
Building off of dylan's design, I threw together these backing plates, allowing me to attach the pannier hooks to anything that may not have a reliable enough surface to mount on. For my purpose, I used these to connect the hooks to some…
i wanted to use existing SW-Motech Legend Gear side-panniers but there are no fitting racks for the BTM Wildfire on the market yet. So i made my own. Disclaimer: these need to be strong! Really, really strong! Using PC-CF wasn't enough on…
Have you, or someone you love worked on an Annie winning project and not been included with the cool kids to get a statue? Well, PRINT YOUR OWN!! That's right... No longer will your bookshelf be awardless on zoom calls! Let your shelf say…
ABOUT: TLDR: I've been using these for three years now still going strong through rain snow and heat. Use metal zip-ties for added security and now the stupid quick release lever isn't in the way. enjoy! This Is Hanger set designed for…
So after a few weeks of iterating and testing, I now have a design that actually works. You can find that here: https://www.prusaprinters.org/prints/72725-bicycle-pannier-hook-for-10mm-tubes Leaving this one here, but it's far too wimpy.…
Replacement Center driver axle hub for Large scale Bachmann 4-6-0 "Annie" steam engine. These plastic hubs are prone to splitting on these engines, this is a replacement for a split axle hub Print Settings Printer Brand: Creality Printer:…
A miniaturized model of a GWR Pannier Tank, based on the original green livery they would sport.
Remix of the Vanmoof/Ortlieb Pannier Bag Wall Mount by PjotrStrog to hang bicycle bags on a Multiboard or a Honeycomb (HSW). You need two MultiConnect connectors, e.g. Multiconnect - Board connectors_Multiboard big, laying down ,…
I often had the problem, that the pannier handles got caught in between tire and mudguard, ‘chewing’ them up, thus needing to be replaced. This tiny deflector printed in TPU prevents that, is easily clipped on and replaced in case of…
This is the projectile from the only tested atomic artillery cannon https://en.wikipedia.org/wiki/W9_(nuclear_warhead) there was scarce information out there for this one, so i primarily based my model off of the non- nuclear version of…
so I originally printed the Topeak rail from here: https://www.thingiverse.com/thing:4438950 But I needed holders for the panniers that come out of it, so I added some attachment points where the rear rack attaches. You'll have to mirror…
Designed for the Tortec Tour Ultralite Rear Rack and an old plastic box. Print out of PLA has worked so far for me. This uses: 6x M3 machine screws (depending on how thick the box is, I used 20mm). 6x M3 locking nuts 12xM3 washers About…
Parts for Tailfin Pannier Cam Clamp Bags Some 3d printable parts to mount Tailfin Pannier bags with the cam style clamp on things other than the Tailfin rack; forks, bottle bosses, etc. Tested on BarYak Mule style mount and adventure bike…
Dyson vacuum cleaners - Extension to suck behind cabinets and crannies. The gCode files are created for the Prusa mini. I used a 30mm Gardena pond tube as a hose. German: Die gCode Dateien sind für den Prusa mini erstellt. Als Schlauch…
General Description Clips I designed for Karrimor panniers which were missing (my first 3d printed part 😊 ). They work best for a luggage rack with circa 10.5mm frame tube diameter (probably 10mm + paint) (designed for a tour de suisse…
Model wynikający z potrzeby.. otóż zabrakło mi rozetki na kranie ściennym i powstał taki pomysł. Może komuś się przyda :)
Like https://www.printables.com/model/487134-cage-mount-tailfin-cam-clamp-pannier but for forks without bosses. Designed to be VHB taped to fork with zip ties for extra security; VHB is actually enough in my experience and makes for a…
A total of 75 Great Western Railway Class 1400 tank engines were built between 1932-1936 for branch line passenger work. Probably the most famous of which were the two that were used in filming the classic Ealing Comedy, The Titfield…
BMW R1300GS Vario Side Pannier strap eyelet replacement with skidpads in different colors, if you dont like the original black ones or dont need eyelets at all. The skidpads on the title picture are printed in PETG Galaxy Silver Mounting…
The Great Western Class 5700 Pannier Tanks were so successful that over 863 were built between 1929 and 1950. The model was printed in olive green, matte black, gold and red PLA with a 0.4mm nozzle, a layer height of 0.2mm and with 15%…
I like this idea, but planned to mount directly into wall or home built rack. I also wanted to use all 3' for 5/8" steel rod I got from the hardware store... So I changed it to be just a screw hole, and modified to make a mid-rod support…
I use a box fixed with plastic cable ties in my bike. But was a pain to remove it and later on fix again. So I designed a clip sturdy to fix in my bike pannier rack and fixed to the box. So you can just remove it when not needed. There…
A simple handle that lets you carry both your Tailfin pannier bags around with one hand. It also keeps the bags upright when they're on the floor, which makes packing easier. I originally made this because I got frustrated having to put…
The locks install behind the rack hooks and cam into the up position, making it impossible to remove the back without flipping them down first.
Honda VFR800 Pannier straps. Based on VFR800 A6 pannier straps to replace broken straps to keep panniers from swinging down. Print using TPU for maximum strength and flexibility.
Needed a way to mount my Ortlieb Panniers to the Titan. This does the job perfectly. I needed it to be super strong (and sexy looking) so it might be a bit overkill from the chunkyness side. So far its been super strong. Been riding to…
M5 nut to hold the steel cable of Touratech panniers in place Print Settings Rafts: No Supports: No Filament: any PLA Category: Automotive
Printed in PLA 4 walls 50% infill printed on side 195 degree nozzle 60 degree glass bed with hairspray (likely hairspray not needed) seems tough enough. you may wish to rough up the face which attaches the the surface of the item you wish…
Kryptonite New York Lock Pannier Mount For 10mm pannier rail and 18.5mm shackle 2 x 5mm zip ties needed per mount
This model comes in 3 parts: basic mount for your lights; attach with 2 screws basic mount + reflector holder; attach with 2 screws and mount your reflector on the base arm back plate; for extra security on the mount plate if required. I…
If you want to combine a basket with the usage of panniers (for example by Ortlieb), this might be the solution. This is an extension to have a second railing on a given luggage rack which doesn't have one. Tested in combination with…
Simone (Annie Liline Jacob) Veil – Buste 🇫🇷 Description Ce buste représente Simone Veil, figure majeure de la vie politique française et symbole de courage et de résilience. Il s’inspire de la photo la plus populaire de Simone Veil,…
Spacer to go between GIVI Outback PL3112CAM racks and the Backcountry Panniers The prints are testet with 100% infill for thermal stability and printed in FilaLab PETG Filament and stock Suzuki exhaust. After riding in heavy slow traffic…
I sewed some custom panniers and used @dylan's "Latching Bike Pannier Hooks" as my attachment system. With the 1in webbing I used I needed a back plate to secure the hook and leaf. I did have to extend the leaf to accommodate the 1in…
Moon Cerberus rear bike lights are very popular but they mount on the seat post and if you have a rear pannier it usually blocks the light from view. This two-part print will bolt to the two holes usually present on the back of most…
Locking system plastic hook. SHAD SR38 Cafe Racer Style Side Case Pannier SKU: X0SR38 Print in 100% infill with ASA for high temperature resistant and mechanical strength.
My old panniers had simple aluminum hooks for hanging it on the rack. They didn't work very well with my new Gazelle C8 e-bike that came with MIK rack. These adapters allow me to hang my pannier on the new bike without having to wory…
This innovative mount clamps around the 8.2mm structural tubing of my bike pannier rear rack and support for the Nitecore NU05 v2 light. My rack is a Filzer PR-5 from MEC (Mountain Equipment Co-op), from about 10 years ago. It looks…
I needed a better fixing on my run-around bike for my old pannier stabiliser straps to hook to, so I made these and they work a treat :-) Category: Sport & Outdoors
Another wall mounting option for panniers. These are designed to take a 10 mm pipe, with one at either end - could also use a short section and a single central support. Install with two M3 counter sunk screws.
The Cake Makka universal bike adapter allows you to hang bicycle-style panniers for cargo, but there's no mounting point to prevent the pannier from slumping into the wheel under load. I designed this stabilizer arm to clamp to the…
Stabilizer for bags mounted on top of a narrow bicycle pannier rack using Velcro straps - fits Decathlon 900 ultralight rack , which is very narrow and would otherwise cause the bag to move from side to side. Printed with PLA - survived…
Designed to mount a pannier bag that attaches to a 10mm rod to a wall or slat wall. Specifically, it was designed to mount the Ortlieb Sport-Roller Classic ( https://www.ortlieb.com/en_us/sport-roller-classic+F6310 ). To mount this to a…
Converts a small horizontal rear pannier frame post into a vertical post for attaching a rear camera or light behind the pannier. You'll need M3x30mm screws and nuts x4 I used some silicone (or rubber would work) between the adapter and…
After I broke the fixation of my Acid Travl15 pannier bag and I could not find spare parts, so I created an adaptor to fit the whole spacing of the Travlr15 to a buckle. For fixation I used 4x M4x8 and 4x M4x12 screws with nuts and washers.
Spacer for an ORTLIEB-ROSE - Sport-Roller QL1 CLASSIC (12.5l) pannier The original spacer wasn't ideal for my seat post carrier, so I designed a better one for my ORTLIEB-ROSE - Sport-Roller QL1 CLASSIC (12.5l) panniers. The original…
Pannier Rail (10mm) spacer I made this due to the arrangement of our ebike battery and rear pannier rack, it allows us to use a pannier bag and clear all the rack bracing. Quite niche, but someone might find it useful. 2x5mm zip tie per…
This is a case to mount a Samsung SmartTracker 2 to the bottom of a pannier rack. It should fit your bike's pannier rack so long as the holes are 25mm part (centre to centre) and have a diameter greater than 3mm. My rack is a “Halfords…
Model Bracket ends suitable for mounting 10mm tube to neatly store pannier bags on walls or doors (tested with Ortleib bags). After searching for an existing design I struggled to find something without visible mounting hardware or (what…
I really struggled to find an existing product like this so thought it'd make an interesting print. The two top lids have little legs that slide into sections on the bottom parts but these don't seem to work probably due to my print…
A little adapter so you can attach Decathlon's rear light from “Front and Rear Battery-Powered LED Bike Light Set ST 110” (Reference: 8405202) to its rear rack ("Urban Bike Pannier Rack 500 26-28 Inch - Black"; Reference: 8667803).…
Print in PETG, I suggest at least 4 Walls -M5x20 x 2 - I used a round head with a hex pattern, may need longer ones depending on your setup -M5 nut x 2 (locknuts recommended) Print 2x of each, the 3mf is oriented properly already
