314 modeli
Bumper printed with CPE HG100 from fillamentum PrusaSlicer has a fillament preset but you can only see it with: “Original Prusa i3 MK3S & MK3S+ MMU2S Single” you need longer screws M3x30 M4x16 Zunge and Skidplate PETG Prusament
These are small shims that always seem to disappear and are hard to find to replace. Take less than a minute to print and match the Aroma original well. 2.3MM thick and made for 3 MM shafts
This is a simple print wheelie bar for the Granite Grom Requires support on build plate only. Hardware needed: 2 - Skateboard style Bearings - 608ZZ Etc 2 - M3x10mm Screws 2- M3 Nuts 3D printing settings 0.20 layer height PLA or PETG will…
Should work with many other models of RC car but i can confirm for sure it works on Typhon and kraton 6s models. You'll wanna use drywall screws and anchors. This seems to work totally fine with PLA and 3 walls. Havent had one break even…
Simply remixed this wall hanger to free some material in the central part. The original one: https://www.printables.com/model/298079-arrma-rc-car-wall-hanger Print setttings: PLA // 205C // 65C // 4 perimeters // 20% Gyroid infill // No…
This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.…
Arrma Kraton 6s Rear Mudflaps These mudflaps fit beautifully on the rear control arms of the Kraton 6s with the existing screw holes (you need to put a little longer screw into the hole which connects the stabilizer rods ) I printed them…
With my kids playing around the workshop, the risk of an impact on the workbench is very high. This simple stand prevents the differential of 6S Arrma vehicle from tipping over while doing maintenance, when you fill it and let it rest for…
Use this jig to hold the shocks of your 1:8 RC Car while you refill them and let the bubbles rise :-)
Why? I needed space under the stairs :-) This is the third model in a series of wallmounts I published and am willing to publish in the future. Features: Stable wall mount to grab the front inferior wishbones Rc cars suspension locks the…
This is a 1:1 replacement for the ar330656, Arrma Kraton 6s EXB heavy duty front suspentioonarm
ARRMA Kraton 6S Rear Mud Flaps, 3D print PETG Prusament or Carbon fiber 1,5mm created by dzino
I designed these improved mudguards for the Arrma Kraton 6S (V6) EXB. They also fit other models, such as the Outcast 6S EXB — I use the same set on both. The original design I tried was too fragile for my needs, so I modified and…
All Arrma Grom tires can be printed with supports only on the build plate. Drift tires printed in PLA will be the most slippery. Print the road tires in TPU for better traction, though they remain quite slippery. Pin tires can be printed…
Überrollbügel für Arrma Big Rock
I wanted to mount and not just double sided tape a 30 mm fan in my Mojave Grom since they are know to overheat.
Das Skidplate passt auf mehrere Arrma 6S Modelle (Typhon, Karton, Limitless,…). Ich habe das Skidplate so konstruiert, dass möglichst wenig Einschraubtriefe des Gewindes verloren geht.
Arrma Senton 3s Blx body 3d scan.
Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this under, Thank You! Side skirts fit on a cr-10 size bed, wheel arches fit on smaller printers. Split skirts coming soon…
Paddle Tires and Rims for ARRMA Typhon Mega. Wheel hex size: 17mm Tires printed with Overture TPU Black. 0.20mm SPEED. 5% Infill (Increase if you need or want a more rigid tire). No supports needed. Rims printed with Polymaker PLA Pro…
***Updated - The last version was flawed. This one should be a lot closer to the original. You have to put the arm on first, then a tiny spring, and then the screw. I'm not sure if it will hold up over time, but for me, so far so good. If…
Dirt guards for the ARRMA Infraction. You lose 2mm of travel and can put a 2mm spacer on the shock shaft to limit it if you want. No supports required. You will have to mirror the parts in your slicer to print the right side.
I wanted to be able to run a high speed pinion without the need to replace the entire motor heatsink. This is currently on my Fireteam using the stock Spektrum FIRMA 2050KV and 15t gear. The plate is printed in ABS and attaches to the…
This is the R-Clip or retainer clip with a retaining tab that mounts into a 3mm hole in the body of the car. This is similar to the ARRMA body clips. Printed with TPU: https://amzn.to/3YqlCrc Flexible filament required. The hole is 1.2mm…
I have designed a drop-in replacement of the Arrma outcast drive shaft (ARA311065) I think it is a stronger design as it is not hollow and is cheap to make if you have a 3D printer. I have tested it on multiple materials and layer…
This is a mount for a Hobbywing QuicRun 10BL120G2 ESC to be mounted in the stock ESC mounting holes for the Arrma Gorgon. Using the Stock mounting holes for the ESC this mount will allow the Hobbywing QuicRun 10BL120G2 to mount into the…
UPDATE 1/8/25: It appears I uploaded the older version of this bumper. There is a newer version that has been reinforced with more connective material towards the flex point that should prevent any eventual tearing. This is now uploaded…
This was made with the intention to printed out of 95a TPU with an infill of 100%. Just in case you want to use a different filament then TPU or have a softer spring, The one without supports in the middle might work better. Special…
35mm replacement fan blade for Hobbywing Max6 and Arrma 35mm fans I made this a complete replacement vs a slide on design because I wanted the maximum amount of blade. A few millimeters matter when you need maximum cooling for something…
This model is for the left side. Use your slicer's mirror function to replicate for the right side. I recommend using an impact-resistant filament like PETG, PC, or nylon. Print with supports. High wall count and high infill. This design…
Set of clipless mounts that will fit a Arrma Typhon 6s. Not perfect but they were a quick design and seem to work fine. They simply just push and twist into place. The rear mounts just are a drop in replacement. I wasn't sure how these…
TPU rear wing protector for the Arrma Mini Kraton, to give the wing a little extra protection from getting knackered when landing upside down. The geometry is pretty much spot on, as you can see in the last pic where I printed test pieces…
Need to drill two holes on the stock side shield to attached, or just glued.
I recreated these mudguards based off a set I purchased, with some small tweaks and added Arrma branding. The Arrma ‘RR’ model was borrowed from https://www.printables.com/model/114281-arrma-logo-multicolor You will require 6 screws to…
Arrma Talion v3 Desert Mod (other models possible, not tested) Here I present you my modded Arrma Talion. For this mod all you need is the Reely RE-5690550 Cage, some m3 screws for assembly, the linked files and a low profile wingmount…
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 170 mm / 6.7 inches. I made the bracket for Arrma 6S Trucks e.g. Kraton 6S, Outcast 6S, Notorious 6S, ...…
!!!DO ONLY PRINT IN VERTICAL POSSITION!!! otherise they won't get perfect because they will sag. Also , choose the thinest layer hight and if possible print one at a time so you get the best quality. 100% infill is necessary These are…
This is a 35mm adapter mount to be mounted into the fan location on the Arrma Gorgon. Using the stock mounting holes intended for a cooling fan on the Arrma Gorgon, this mount will allow you to mount a 35mm fan to the existing mounting…
Front and rear bumper mounts for the Arrma Mojave. These should only be printed in a flexible material like TPU.
For a ARRMA 40mmØ motor (62mm long) fan mount used in some remote controlled cars. dual 4010 and dual 4020 mount Print should not need any print support. PETG or better for the clip part, since I assume it's on a hot motor. Clip itself is…
Mudguard for Arrma Notorious 6S v5. For the other side mirror this file. You can mount thin mudguard with cable ties or screws.
This mount is for the SkyRC GNSS rear shock tower mount. It allows you to run the mount backwords and have it put between the rear diffuser mounts to keep CG as low as possible for speed runs.
When jumping with the Arrma Typhon Grom the bottom hits to ground, causing some severe use and tear. These pieces are to be mounted on the bottom front and rear, over the existing piece. Just undo the 4 screws and mount this with them.…
Front splitter for Arrma Felony, made specifically for the Bittydesign VPR body. Includes full and split files for smaller printers, and also SVG file so you can use the inside curve and bolt holes and design your own outside curve. Print…
I've made this small car stand for my 1/18th scale Arrma Mojave Gromblx, to keep the wheels off of the ground (to prevent flat spots while the vehicle is stored away and as a display and work stand. Other Arrma vehicles on the same…
Picked up an ARRMA Typhon but didn't have a turnbuckle wrench. It's designed to be a close fit so it doesn't strip. You'll have to press it on the first time. Maybe even take a few swipes of sand paper. I printed it out of PLA at 100%…
After losing a body clip I decided to make a threaded mount that would eliminate the need for clips. I printed this in CF nylon and it had been indestructible so far. Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: Yes…
Based off the motor support by hyperion917 on Thingiverse I wanted to make some changes to both for printing and function improvement I got rid of the tab for the 4mm screw so it could print flat and made a new way for the zip tie…
I took the original file and mirror the right side guard to make the left side and uploaded it. So now you can get a set
Can be printed in different materials, depending on what you want to achieve. I have printed them in Polymaker PolyFlex TPU95 and Prusament PC Blend. Currently testing to see what works best. Custom supports are drawn directly onto the…
Rear wheel well fully redesigned from new sketches to match side skirt mounting holes on original design. More strength, and allows more room fore and aft of the tire to prevent rubbing. Front deflector includes additional mounting point…
I had a TPU wing on my Kraton 4S but the screws ended up pulling through the mounting holes. This piece connects the two screws to prevent against this happening again, while allowing me to still use the wing with the widened mount…
To assemble this wheelie bar design, you will need the following hardware: 1x M5 × 80mm Screw 1x M5 Nyloc Nut (Nylon-insert locking nut) 2x 15mm Washers 2x M3 × 10mm Screws 2x M3 × 16mm Screws
Usefull tool for disassembly and assembly of the shock caps of the Arrma AR330551 shocks. The shock caps (AR330450) can be quite challenging to remove. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Two versions of rear arms.. -I recommend atleast 3 or 4mm walls/bottom/tops with vertical printing.. For best durability make 100%infill.. This is rear right arm. For left arm - mirror this part. It is a perfect fit. -it doesnt have holes…
I had printed some other center skid plates for my Typhon 6s but none of them were as durable as I would have liked, especially as I wanted an ultra strong one for my Fireteam as well. Thus, I made this one which uses 4 M4x12 BCS screws…
Hey guys, since the 4th of July is coming up, having little flags on RC cars seemed like a fun thing to do, so I created a mount for the ARRMA Mojave 4S. After recently getting the ARRMA Mojave GROM, I decided to make a flag mount that…
Hey! This is a roof reinforcement for the Arrma Granite rc car. With this reinforcement the roof is much sturdier than before. This prevents the actual body/case from getting scrached up or bending too badly if the car flips around. You…
These should work with the Arrma Typhon 3S wing mount and the upper is modeled for fitting the Typhon 6S wing and Kraton wing. I have not fitted it to the Typhon 3S wing. There is a 10 and 16mm variant. The 10mm works with the granite…
Don't just bash, blast it ! This removes the existing 35mm fan and shroud with a 40mm for more cooling opportunities. Screw holes are undersized for thread forming with M3 hardware. BOM [1] 40mm fan (4010, 4020, 4028) [4] M3x15 SHCS [4]…
ARRMA Notorious Mudguard with ARRMA logo. Is a variation on a model, but not a remix. Still great inspiration from @Bizkit83.
I looked everywhere for an Arrma Granite Voltage front bumper. Couldn't find one to 3D print so I designed my own. I created the front hanger and mount points myself. I used the front design found here:…
Print in some durable material, such as PC or PLA-CF. Tested with PLA-CF. No supports needed. ARRMA_Wheel_Frame - Print twice, 1 mirrored. ARRMA_Wheel - Print twice, 1 mirrored. ARRMA_Wheel_Frame_Spacer and ARRMA_Bearing_Frame_Spacer,…
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 130 mm / 5.1 inches. 2 versions normal version is recommended for regular tires with foam inserts e.g. Arrma…
I really dislike the foam feel of RC car radios. I decided to design a replacement for the SLT3 used with my Arrma Typhon 3S. This part will fit any SLT3 transmitter, which comes on most all of Arrma's 3S line (Typhon, Granite, Senton,…
My daughter lost her lower shock cap on the Arrma Grom Typhon 2s and I refuse to pay $18 for a new one. Made this quickly in Fusion360. Printed as follows .16 Layer height 100% infill ABS or PETG Support only in middle
Schlammschutz für Arrma Big Rock/Granit
I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 66 mm / 2.6 inches. I designed the bracket for the Arrma Mojave Grom. For mounting use 2x 4,5mm Spax screws…
Front Shock Protectors for My Arrma Granite After destroying the front shocks on my Arrma Granite for the second time, I decided to create protectors similar to the ones I use on my TRAXXAS Slash . Assembly is quite simple: You only need…
I made this design due to losing the originals while making a repair. these were designed to be a temporary fix, but the fit well and i may run them a while to see how they hold up! printed with PETG with %100 infill and a brim. my qidi…
Should fit any of the 3s Arrma models. credit to resu13 took his design and made slightly larger ball part to fit my sloppy arms. Most of mine "clicked" in place. In Cura right click multiply to the number you want. Print Settings Rafts:…
Winterräder für Arrma Big Rock/ Granit
This mount for the Armma Infraction puts the SkyRC GSM020 GPS on the outside of your truck where you can see it. It will sit horizontal with no angle and is held down by 3 zip ties per side and one on cross brace so it won't slide down.…
Print in PETG or ABS for heat resistance. 2x M3 X 12 Countersink screws to attach the spacer to the motor and 2x M3 X 16 screws to mount the motor are required. Fitment tested with a Castle 1406 motor in a Gorgon and should work with most…
Mudguards for the Arrma Mojave 6S V2 / EXB. Two versions: One pair with "Mojave" print and some blank ones. Works with Scorched RC Fenders. Print in TPU, use M3x6 or M3x8 to attach them. Send it! Print Settings Printer Brand: Creality…
There are already some mud flaps for the Mojave Grom around on other platforms, but none of them really satisfied me, so here's my take on them, hope you like it :) Mud Flap Mount: Re-use the original screws, or replace them with 2x M3x16…
A cover for the center shaft of a Arrma Mojave 4S XXLWB chassis. I made this because so I don't have to worry about battery wires or anything else getting caught in the shaft. In addition to covering the center shaft, it also slots over…
Design Concept The design focuses on durability and stability, ensuring that the Wheelie bar withstands high-speed stresses. Perfect fit for ARRMA QUAKE & ARRMA GORGON. Purpose This Wheelie bar is tailored for ARRMA vehicles, aiming to…
Für alle die eine Max8 in den Mojave 4s einbauen wollen. Wer den ESC kleben will nimmt nur die untere Platte, in Verbindung mit der oberen Platte lässt sich der ESC verschrauben. Könnte evtl auch für den Kraton 4S passen aber mangels…
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 105 mm / 4.1 inches. The bracket is optimized for Short Course Trucks, e.g. Arrma Senton or Fury, to give…
Basic mudflap design shaped to not interfere with the chassis much. A lot of the designs currently are for older arms. Fits my Granite 223S V4 and going by the site a few others that use the ARA-1606 rear arms: Gorgon Fury Senton Vorteks
Arrma 3s rod end with pivot ball built in. Print using supports. Paint on might be necessary use PETG or ABS Note: I have not tested this. Please leave feedback and rate
This is a more minimalist shelf design for the already excellent design by Chad. The shelves also have a 6mm wide channel with allows self adhesive draft excluder foam to be inset which adds a grippy surface -…
This is a rough model of front arm for kraton 8s. I haven't tested it! For rear arms I had best results while printing it at 45deg angle with ABS plus and high temps.. Arm held for normal bashing and some big jumps - but failed at landing…
Design Concept This model is designed as a customizable upgrade for ARRMA RC cars, offering both aesthetic appeal and enhanced performance with its robust frame. The coolest way to add +20mm Wide to your favortie ARRMA car! Usage Ideal…
Really liked Ludolg's shock stand, the 1/8th base works great for Kraton 6S shocks, but I also needed something for my Grom's and the Mini Kraton, the 1/10th base was too large, so I quickly made a new one that would fit my needs. Just…
This is a mount for a Radiolink R4FGM receiver to be mounted in front of the rear shock tower on the ARRMA Gorgon. The mount uses the existing mounting holes for the rear shock tower mount. Once mounted the receiver sits in a tray and is…
Print from PETG wheels 5 walls 15% +filling Insert full perimeter Need 2 pcs 4mm x 40mm Screw
Для печати отлично подходит ТПУ 95А. При необходимости отверстия пройти сверлом. Печать без поддержек со 100% заполнением.
Ich habe eine Halterug für die Mittelstrebe gezeichnet um 5mm Kabel schöner zu verlegen.
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 91 mm / 3.6 inches. I made the bracket for Arrma Mini Kraton. For mounting use 2x 4,5mm Spax screws or…
Wheel for the wheelybar of a Arrma Notorious 6S v5 Print in TPU and no Supports
German Mein Design dient als Ersatz für die originalen Mudguards (ARA-3293). Es funktioniert beim Arrma Mini Kraton 3S. Ich habe die Mudguards in TPU mit 100% Infill gedruckt. Ich denke, dass es nur Sinn macht die Mudguards in flexibelen…
This is a remix to allow mounting the GPS with just Velcro or another similar material instead of clips. Cutouts are on both sides to allow easy removal, and it's also possible to charge the GPS with a low profile USB-C cable. Print…
German Mein Design sorgt dafür, dass der Kolben des Dämpfers geschützt wird. Es funktioniert beim Arrma Mini Kraton 3S. Ich habe es in TPU mit 100% Infill gedruckt, damit es eine gewisse Flexibilität und Stabilität hat und nicht so…
2018 Arrma Talion rear Mudguards, uses the 2 spare M3 screw holes in the rear A-arm to mount the mudguard. Versions Normal: Mk5: Vertical only ribs for ease of cleaning and rigidity. Mk6: Vertical and horizontal ribs for extra rigidity.…
![ARRMA FIRMA 150 FAN MOUNT [40MM]](https://media.printables.com/media/prints/286044/images/2524194_e560fd14-7295-43f9-85e9-762f91da3e0c/render3.jpg)
