158 modeli
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it. Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same…
Wydruk około 5,05 €–6,18 € nettoWstępna wycena jednego wariantu
Not satisfied with the solutions I found online, I designed this mount. I use two toolheads only to make the supports easier to remove, but it can also be printed using a single toolhead.
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
This Buddy3D Camera mount is compatible with XL and XL Enclosure. How to guide: https://help.prusa3d.com/guide/how-to-set-up-a-buddy-cam_385017 Recommended settings: Default 0,2mm layer height profile, PETG filament, supports are not…
This Buddy3D Camera mount is compatible with MK Family and MINI standalone printers including MK Family and MINI in the enclosure. Please note that magnets for using the camera mount in MK & MINI enclosure are recommended. Magnets prevent…
The original Buddy3D camera for the 🥰 Prusa CORE One comes with the Wi-Fi antenna freely hanging outside the housing 🫣. This not only makes it look unfinished but also leaves the antenna vulnerable to damage. The flexible part of the…
Description Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PCCF (tested on Prusament) - please remember that when printing from PCCF, you need a hardened…
The holder for the Buddy3D camera is designed specifically for the MK4S 3D printer but can also be mounted on other printers with compatible aluminum profiles. It simply twists into the profile and features a "Snap-to-Fit" mechanism for…
Some of the existing modifications/add-ons installed on my enclosure are not compatible with other Buddy3D camera mounts that have been posted for the Original Prusa Enclosure, so I decided to design a new one. This is a simple camera…
This is a small Mount for the original Buddy3D Camera. You can use it on the Prusa XL Enclosure or on the Original Prusa MK Enclosure. You can use the lock plate from the cam (in the bottom of the cam) to screw it on the mount. My screws…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a simple mount for the Buddy3D camera to fit the official Prusa XL enclosure. Rather than hang this upside down using the mount point in the bottom, which would be a bit weak to 3D print, I made this mount instead…
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
Simple Buddy3D Camera frame mount bracket for the Prusa I3 printers. Fits the standard aluminum frame without any tools or fasteners. It utilizes the standard mounting plate you get with your Buddy3d camera. You can freely move the…
This adapter is designed to seamlessly integrate your Buddy3D camera into the official Prusa enclosure. By replacing the original camera support, this printed adapter provides a secure and stable mounting point, keeping your camera…
I combined a couple files to fit the Buddy 3D camera on the MK series printers.
A simple ball-mount adapter that fixes and allows fine-tuning of the Buddy3D camera viewing angle inside the Prusa Core ONE L enclosure. The problem: The stock Buddy3D Cam position on the Core ONE L often results in a poor viewing angle —…
Here is a simple design for a Buddy 3D Camera mount for Prusa XL Enclosure . I printed it with 0.28 draft and organic supports on the build plate only. To attach it you will need: 2 @ M3 nuts 2 @ M3 x10mm screws
No supports. Use small woodscrews to secure the Buddy3D base to the mount (don't overtighten, it is only plastic).
The official Prusa Buddy3D Camera for the CORE One/+ is an awesome printer add-on that works great and integrates well into Prusa Connect, but the angle that it mounts onto the frame doesn't allow you to see a large part of the back-right…
To mount the bracket on the Aluminium extrusion, you will need a m4 Screw and Nut for the 3030 Extrusion.
Timelapse is recorded using this holder AnkleKris is back with a new creation! This time, I present to you... epic drum roll ... the Core ONE Phone Webcam/Timelapse External Holder ! It’s a quick and practical 3D print — just 9 minutes…
Small ( < 20g! ) mount that keeps the light source behind and the camera out of the way of the toolheads. Assembled with one M4 heat set insert. Secure in corner by first pushing through the two side pegs and then securing the heat set…
One type is identical to the original if you damage the original. Type M3 is directly for screwing M3 screws into plastic. The thread length is extended to 4mm. For heat-inserted M3 and M4 nuts, the depth is extended to 6mm.
Very simple print to keep the Buddy3D camera cable tucked up in the corner. Print in PETG (or something with higher temperature tolerance) and press in a 10x3mm magnet. No need to print with supports or in a different orientation. The…
I wanted a simple mount for my Buddy3D camera that keeps it “attached” to my printer so I made this. It clips into the aluminum extrusion and raises the camera up enough to see the first layers well. You can use a t-nut to secure this but…
I, originally, printed the XL Camera Mount | Buddy3D for the XL Enclosure and noticed I could not capture the entire print bed as the head of the Buddy3D camera could not tilt any higher. I duplicated the mounting base and rotated it to…
Attach the new, compact, Buddy3D Core One camera to your Prusa XL using the official Prusa XL Camera Mount: https://www.printables.com/model/1105925-xl-camera-mount-buddy3d Should work for the XL_enclosure mount also. All pieces should be…
This is a terrible way to mount your new Buddy3D Camera in your Original Prusa Enclosure. It's not very elegant, the model lacks a clean geometry and it also needs supports. BUT it works, it prints in 25 minutes and it makes your camera…
Updated Nov 7 2025 - Rev 1_2 - Fixed letters to make them easier to assign color/filaments. Updated Nov 6 2025 - Rev 1_1 - Added additional structure to arm extension for better function. Introducing the Prusa XL Cam mount using the…
First (Bad) Scan without Contrast Spray from the Buddycam for People that want to check the Size. Update 02.12.2024: Uploaded a Accurate 3d Model with mounting fixture
SupportBuddyCam_Crochet in PETG SupportBuddyCam_Pied in PLA Glue it together
"Buddy3D Camera for Prusa CORE One" adapter to MK4s Perfect camera angle. I am suprised no one made this adapter before. NEEDED: 3x Zip Ties M3x18 Screw for Mounting Hex tool to remove the original backplate from the camera Assembly:…
Design features: - easy to print: no support structures and very few filament needed - fits perfectly at the buddy3D camera, not too tight, not too loose I used threaded inserts and M3x10 screws. I added the FreeCAD file of my design in…
The modified Buddy3D camera that Prusa offers for the CORE One is a compact corner-mounted design well suited to a rectangular enclosure, but its geometry is very specific to the CORE One enclosure and it lacks any additional…
Remix of the Buddy3D Cam Ball Joint Mount with magnets with very minor changes to use circular magnets that are 10x3mm, rather than the rectangular magnets of the original model.
This Cameramount is an easy to fix solution for the current (2025) Buddy3D Camera, sold via Prusa Online Shop. The mount is for to use with the mounting plate that comes with the camera. It is variable in the fixing angle so the user is…
I didnt like the bulky camera, and didnt need the Camera Controls, so i removed the motors. Everything else still works. Speaker, mic, Night vision and USB-C . No Soldering requiered. For the Slim Cover, you can use the long screws that…
Holder After printing remove the support, melt in the threaded inserts M3 (2 pcs.) and press in the magnets Ø6x3 (8 pcs.). The height stop is bent 90° and snaps into place (see picture) Camera mount Remove the support, drill out the holes…
There is a collision between the vent grille of the Prusa CORE One L and the Buddy3D camera. This is weird as the camera is shipped with the printer, it is not an accessory so it should have been broadly tested... Maybe a tolerance issue.…
Buddy3d Mount for XL Enclosure with screws
I added additional support for 10x6x2mm magnets in the legs. Now you can use either rectangular or round magnets. This is a modified design - @Jason_50683 , @DvG3DAtelier
A versatile 3030 extrusion holder: just print out as many elements as you need (normal or short length) and chain them together. Tolerances are 0,1 mm, depending on the printer and the orientation of the print you may want to glue them…
(EN) You need to print with support. You will need 6x magnets ⌀ 8mm x 3mm. Press the magnets with force until they stop. (be careful, the magnets will stick out a little) If the magnets don't hold properly, you can use glue. I used PET-G…
This is a shorter, sturdier mount for the Buddy3D camera. I also changed the angle so it points to the print bed.
Printed using the same materials and settings as Prusa used in the original: PCCF, .20 layer height, 15% grip infill. I mounted it top-front-center of the enclosure, as shown in the pictures. With four magnets total, the grip is pretty…
This is a simple camera mount for the Prusa Buddy3D camera. It does fit inside the enXLosure enclosure (I highly recommend it if you're thinking of adding an enclosure). I don't know if it will fit inside the Original Prusa XL Enclosure.…
I needed to mount the Buddy3D Camera to a wall in my enclosure, so i designed a screw-on holder. There are 3 different types: the lugs are in different angles. Pick the one you need. Unfortunately it has to be printed with supports under…
In order to fit my modified Prusa Buddy3d Cam to my Prusa MK4S, I designed remixed a few parts . My creations are the 3 downloadable STL files here, arm/clamp/sleeve . Printed on my Prusa MK4S in PETG with 0.4mm nozzle / 0.15mm layer…
Remixed the original by Prusa to fit on the side of the EnXLosure by Voxel3D
Buddy3D Kamerahalter für Prusa CORE One – Verbesserter Deckel mit Schraubmontage Überblick Dieser Kamerahalter ist eine verbesserte Lösung für die Buddy3D Kamera des Prusa CORE One 3D-Druckers. Im Gegensatz zur Standard-Magnetmontage…
This remix maintains the fix for the collision between the Buddy3D camera and the vent grille while also adjusting the camera viewing angle to better capture the printing surface. This is a very simple fix that results in better operation…
I didn't have countersunk screws to sit flush inside the mouting plate, so I made this taller version to have room for screw heads when attached to camera. ~9 minute print in PLA, 0.20 layer height. “Wings” need supports.
Yes, you can just put the Buddy Cam on the frame as it is, but then you won't see the whole bed. This mount gives the camera a better angle, plus it makes is attached more securely with magnets. The magnets are supposed to be the same as…
The wide angle lens on the Buddy3D Camera for Core One can see a bit outside of the printer. Especially after mounting the angle modification by @Jason . So I made these little covers that just pushes onto the lens of the camera, and…
Filament holder for - Aurapol, Spectrum, Buddy3D, C-TECH. Two versions, one is more flexible/moving, the other holds more in position. For 1.75mm filaments. The hole is rounded so the filament doesn't pull out spontaneously.
Ability to add 4 more 20x6x2mm magnets. The 3mf is provided so you can tweak it with your own negative volume as you please
This is a remix of 3DSourcerer's SUMO/DELACK Enclosure corner piece to hold a Buddy3d camera. You can mount it to the top or middle corner. The ‘foot’ that extends below the corner adds rigidity and support to the camera, particularly if…
I had my camera mounted on my enclosure in the upper-left corner but found the height of the image to be less than desirable. Since I was also in the process of making sure the enclosure could be easily removed without significant changes…
Ein Ersatz-Deckel für die Befestigung der Buddy3D Camera.
If you don't have 10mm (source model) or 8mm (this remix: https://www.printables.com/model/1518691-camera-lid-remix-v3-with-round-8mm-magnets ) magnets at home, but you do have 5mm, or 6mm magnets, then this remix is for you! See the…
CLICK HERE FOR ASSEMBLY INSTRUCTIONS
Print instructions Print in PETG with 2 walls and 10% gyroid infill. Or more if you want. Building instructions Attach the mount of the camera with two 4x16 wood screws to the bottom of this holder. Then, attach it to the wall or…
This is almost identical to @CamRodandChief 's awesome original, except that the camera is held more firmly in place. I printed it on a Prusa XL with Prusament PETG using the 0.15mm STRUCTURAL profile and organic supports. Same as the…
This is my simple solution for storing the camera cover that comes with the Buddy 3D Camera for the Prusa Core One. The holder is magnetically attached to the enclosure using a 3×6 mm round magnet . To insert the magnet, simply pause the…
Print Prusa Petg Orange 0,1mm Fast detail !! The ring is fixed with two drops of super glue. There is a small rim inside to prevent the glue from leaking out. Use a small amount and proceed with caution, as you may damage the plexiglass…
This mount for the Buddy3D camera is specifically designed for enclosures made by 3DUpFitters, and replaces the original corner bracket in the upper-front-right corner of the enclosure. The design consists of two parts to allow the camera…
I had square nuts on hand, but no heat set inserts, so a quick remix it is. This mounts onto the original XL enclosure, and the nuts slip right in. Print with a heat resistant material- ABS/ ASA are preferred, but PETG will work.
simple printing, 4 minutes Print Prusa PetG Orange. 0,1 mm Fast detail prusaslicer default settings The ring holds tightly, I recommend fixing it with superglue.
Modified @pcgeekesq_2498228 's mount to use M3x8mm screws and nuts since I didn't have any magnets on hand. This version will require you to drill 2 small holes on the metal brace that the enclosure door hinges attaches to. I also added…
The stock Buddy3D camera for the CORE One has an angle that cuts off part of the print bed at z=0, but has a better view of the build area at higher z levels. I prefer the opposite, since most of the parts I print are not very tall. So I…
REMIX holder for the buddy3D Camera. I added the text "original Buddy3d", in the mk4 style. I also added 3 cable holders, it is easier to hide the cable. I used the same print settings as described in the original. feel free to add a…
I was using TAPO C200 for a long time with my previous MK4S printer, so I wanted to continue using it, but it was too big to fit into the CORE One, so I did some changes to it. I got rid of all motors, speaker and leave just the important…
Adapter to mount the Buddy3D camera into the Prusa Enclosure.
Unscreen two top screw on the camera and add the wall mount to it. Screw the wall mount to the wall,
This model can easily be adopted to the magnets you have at home! And makes use of the packaged mounting plate. You need 2 Screws m3 5mm 2 m3 heat inserts (voron style) 8 Magnets (I used 8 5x1.6mm magnets, thanks @Marie ;)) maybe some…
I made this because the original was mostly looking above the build plate, but I wanted it to look more at the build plate. This is a remix of the other profile mount holder, twists into place on and holds onto the camera firmly. Insert…
I suggest installing with double-sided tape as I did. No holes, no drilling. To be used with the stock twist lock. Mirror the object using the slicer if it is better for you. The 3mf file has supports already configured.
Buddy3D mount for Prusa MK3/S/+, MK4. Difference from the original is that the base faces right instead of left.
recommended magnet size : 20x10x5mm - Neodymium magnet (2 pcs) recommended screw: M3x10 (1 pc) Recommended settings: Default 0,2mm layer height profile, PETG filament, supports are not needed .
This model allows you to use the Buddy3D camera with the Prusa XL. It even works with the EnXlosure (but that is tight). This is a multi-remix of multiple models: The 3DBuddy redux model The Heatbed accessory mount The new version 2 has…
For mounting the Buddy3D camera within the enclosure, a small bracket has been designed and tested.
Stand with 30deg FOV Obstruction 2 different sizes - 70mm is proper height for PRUSA MK4
Redrew the originals with Solidworks and converted to STEP files so others can modify the originals easier. I needed to customize this mount to my needs, but as the originals were STL files, they were difficult to modify.
The out of the box Prusa Buddy3D camera is just a bit to big and unwieldy, and I found the awesome project by @Holck , but I wanted to be able to reuse the articulating arms I was using with my old low resolution camera. So I remixed the…
A remix of Karstens Buddy3d mount. Made it printable in one piece, and without the bending part. Also added a seperate mounting plate for the cam Needs magnets 6x3mm
After designing my External Spool Holder for Prusa XL Enclosure , I realized that the official model for the Buddy3D Camera mount prevents me from using them. I also wanted to try to rotate the mount point slightly in order to get the…
I created a mini version for the camera housing from the parts list of my Buddy3d. Then I made two mounts: one long that reaches the center of the printer and the other short! The idea is to remove and install without screws. It only…
Dessicant (Silica gel) container for Buddy3D 1kg spool with outer and inner cylinders 52mm Extrernal diameter - 1mm round holes mesh 20g total weight Based on the one made for Prusament :
I'm a new owner of the prusa buddy3d cam, seems to me like the ugliest printer camera on planet. So after having some trouble to get it running, because my wifi password was too long for this peace of hardware, I did not found a nice…
This is a camera mount for the Buddy3D camera. It mounts using two of the screws on the side of the EnXLosure. I printed it in PETG just to match the rest of my printer, but since it mounts to the outside I'm sure PLA would work fine.
I wanted an enclosure for my Buddy3d Cam that isn't as bulky and I don't need the tilt and pan funcionality (if it could be used anyway). This alternative Encolsure fits all componants exapt the Motors (even the microfone). To screw the…
The Original Prusa Buddy3D Camera for the XL is rather large and the original camera mount by Prusa, mounts the camera in a bad spot. I wanted a more compact camera including the mount without disassembling the frontal part of the camera.…
After the magnets failed to hold it properly and the camera fell, ruining a print, I decided I wanted a version of this which could not detach. It uses a single m3nS nut. You'll need to replace the m3x4 socket head screw which comes in…
This is a camera holder for the Buddy3D to be mounted somewhere into your Prusa Enclosure (or other enclosures as well). Two magnets hold the mound on metallic parts (steel) or on glass with magnets also on the other side. You can mount…
I modified the camera holder from @Holck_66633 to make his Prusa Buddy 3D Camera Redux Tiny Enclosure fit to my setup . My Redux Mod worked realy fine, and I am super happy with it . The screw (2 parts) I used to tighten my clamp came…
An alternative mounting plate for the Buddy 3d camera. Enables more mounting positions.
I liked the original except for the cable sticking out to the side. Routing it towards the back made more sense.
This model integrates three slots for 3×10×2 mm neodymium magnets, one in each corner, instead of the four magnets used in the original design. My goal was to use it in my 3D Upfitters enclosure with my recently upgraded MK3.5S. For that…
![Prusa XL + Buddy3D [+ (optional) EnXlosure] = Finally a proper camera! V2.1](https://media.printables.com/media/prints/cc1ff817-1bc4-422b-8db8-b8621fb7fbab/images/9932174_79ba0de8-bcc7-42f4-9842-4478fb3b0da4_d38beba8-87ac-48ba-bcf0-e3dc7d675355/screenshot-2025-06-02-at-163442.png)
