P
PrintablesFilip
Device holder CFMOTO 450MT
Mobile holder CFMOTO 450MT
Wydruk około 11,41 €–13,94 € nettoWstępna wycena jednego wariantu
- Pobrania
- 81
- Polubienia
- 5
- Ocena
- 4
Wyniki wyszukiwania: cfm
Liczymy pasujące modele…
P
Printablessamwiseg0
Ego Blower Wall Mount Bracket 765CFM
The original model provided by blinkz did not work on a 765 CFM so I re-modeled it with the proper dimensions. Part is already oriented for optimal strength. Buy me a coffee If you like my work, you can buy me a coffee !
- Pobrania
- 1199
- Polubienia
- 119
- Ocena
- 5
P
Printablesblinkz
Ego Blower Wall Mount Bracket 615CFM
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
- Pobrania
- 1062
- Polubienia
- 111
- Ocena
- 4,75
P
PrintablesDeividas
RIM CENTER CAP CFMOTO
Suitable for models 2023 CFORCE 1000 CF1000AZ, 2023 CFORCE 500 CF500AZ-9S, 2023 CFORCE 600 CF600AZ-3SA, 2023 CFORCE 600 TOURING CF600AZ-3LA, 2023 CFORCE 800 XC CF800AZ-2A, 2023 UFORCE 1000 CF1000UZ, 2023 UFORCE 1000 XL CF1000UZ-2, 2023…
- Pobrania
- 646
- Polubienia
- 37
- Ocena
- 0
P
PrintablesTS-Design
CFmoto 450MT (IBEX) Sunshade for speedometer
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
- Pobrania
- 618
- Polubienia
- 35
- Ocena
- 5
P
PrintablesHitLuca
120mm fan model (EZDIY-FAB 120mm 200CFM)
My own 3d model of a 120mm fan, more specifically a 200 cfm 120mm EZDIY-FAB fan . I needed a 120mm fan model for a fume extractor I designed, so I took some time and modeled the fan aswell
- Pobrania
- 510
- Polubienia
- 10
- Ocena
- 0
P
PrintablesParagom3d
CFMOTO 800MT-X Windscreen Buffeting Deflector
A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this) I am not a…
- Pobrania
- 310
- Polubienia
- 7
- Ocena
- 0
P
PrintablesVit Janovsky
CFmoto 800MT shield
Sunshield for CFMOTO MT800 First put the upper part and fit the lower part afterwards Holes in the lower part for water drainage
- Pobrania
- 307
- Polubienia
- 16
- Ocena
- 0
P
PrintablesVit Janovsky
CFmoto 650MT shield
Screen shade for CFMOTO 650MT / Adventura 2022+ model with TFT display. Can be fitted with original plastic rivets. I used standard PLA and 0,2 nozzle for good logo design. Model with Hockey Kladno logo and without.
- Pobrania
- 299
- Polubienia
- 18
- Ocena
- 0
P
Printableskotana
CFMOTO 450MT(ibex) FRONT ABS sensor cover
CFMOTO 450MT FRONT ABS sensor cover I also uploaded a version with the bottom part cut off for drainage. I haven't checked it yet.
- Pobrania
- 283
- Polubienia
- 26
- Ocena
- 0
P
PrintablesTu Yimin
CFMoto 450MT (IBEX) Mirror Cap
0.1mm layer height. Print without support.
- Pobrania
- 259
- Polubienia
- 16
- Ocena
- 0
P
PrintablesSE3Dtech
EGO 580 CFM Leaf Blower Stubby Attachment
Stubby attachment for for EGO LB5800 (580 CFM) Leaf Blower. Includes crush ribs on the interior for a more flexible fit and a twist lock mechanism. Useful for blowing off car, gutters, etc. Depending on your printer's settings and…
- Pobrania
- 205
- Polubienia
- 40
- Ocena
- 5
P
PrintablesBonticus
CFMoto Ibex 450 / 450MT Switch Mount
I needed a convenient place to put the switch for my auxiliary lights. This mount hooks into the front screw and indexes on a slot on the underside of the left controls to stop rotation Including the fusion file in case you want to remix.…
- Pobrania
- 191
- Polubienia
- 26
- Ocena
- 5
P
PrintablesBonticus
CFMoto Ibex 450MT Tool Tube
This is a tool tube for the CFMoto (Ibex) 450MT. It has been customized to store the Icon mini ratchet & extension, Harbor Freight 1/4" 8/10/12/13mm sockets, and up to 10 hex bits. Inspiration came from the design on Uncle Wang's Shop.…
- Pobrania
- 169
- Polubienia
- 15
- Ocena
- 5
P
PrintablesSvenbo
3.5mm Cordial CFM 3 VY Audio Cable Under Desk Mount
With this mount you can attach the 3.5mm plug under a desk. I use the cable to connect my wired IEMs (3.5mm) to my mixing console (6.35mm) Rodecaster Duo. I've used 3,5mm countersunk spax screws. The cable is a Cordial CFM 3 VY. Printed…
- Pobrania
- 168
- Polubienia
- 17
- Ocena
- 5
P
PrintablesMauro Moreno Chemin
Extensor 50mm - CFMOTO 800MT
Extensor de parabrisas para CFMoto 800MT, usa insertos para Plastico rosca M6 Impreso en PETG 3 perímetros Infill 30% Honeycomb
- Pobrania
- 153
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSE3Dtech
EGO 580 CFM Leaf Blower Wall Mount
Wall mount for the EGO 580 CFM Leaf Blower. This print attaches to the wall with 2 screws and fits into the keyhole slot. Recommendations: Mount directly to a stud or wood panel that is secured to stud. Strong drywall anchors may also be…
- Pobrania
- 145
- Polubienia
- 23
- Ocena
- 0
P
Printablesrafez
CFmoto 450MT (IBEX) Screen Sunshade
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
- Pobrania
- 141
- Polubienia
- 7
- Ocena
- 0
P
Printableskotana
CFMOTO 450MT(IBEX) oil drain
CFMOTO 450MT oil drain Machining of skid plates is required. Some skid plates cannot be mounted.
- Pobrania
- 138
- Polubienia
- 18
- Ocena
- 0
P
PrintablesB3D
CFmoto Cforce Threaded Funnel
CFmoto Cforce Threaded Funnel with breather. Will fit 625EPS and similar.
- Pobrania
- 136
- Polubienia
- 13
- Ocena
- 0
P
PrintablesSilvo brunčič
Mounting hole covers cfmoto gen3 gen2
I was tired of having mud in the mounting holes after every ride. So I created a cover that just plugs into the holes. Print so that the top of the model touches the bed. PEI bed is best as it has a texture similar to a luggage board.
- Pobrania
- 134
- Polubienia
- 11
- Ocena
- 0
P
Printableskotana
CFMOTO 450MT / IBEX450 FORK Preload Adjuster
The fork preload adjuster for the CFMOTO 450MT / IBEX 450. It’s designed to fit very tightly, so you need to tap it in with a hammer during installation. Once installed, it stays in place securely unless it receives a direct hit. I’ve…
- Pobrania
- 130
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBencham95
CFMoto 450MT Garmin XT2 Mount
Mount to attach garmin xt2 to a mt450 via the stock dash bolts. I used m4x25 to mount the garmin charger. PETG 0.2 35% 10 walls 5 top and bottom
- Pobrania
- 129
- Polubienia
- 8
- Ocena
- 5
P
PrintablesPeter
Tank Cap for CFmoto ATV
Tank Cap for CFmoto ATV limiting, reducing, expanding cap pre lock cap for ATV CFmoto
- Pobrania
- 120
- Polubienia
- 19
- Ocena
- 0
P
Printableswyatt wolf
EGO 650 CFM Replacement Nozzle
This is a stubby/replacement nozzle for an EGO 650 CFM blower. Of course it would be very difficult to print a full length replacement so I opted for a size that will fit most printers. This should fit snuggly on the blower, but it has a…
- Pobrania
- 119
- Polubienia
- 13
- Ocena
- 0
P
PrintablesDr.Layer
CFMOTO bullbar clamp
I printed it in both PLA (for prototyping) and ABS and ASA. Used a 0.2 mm layer height and 30% Crosshatch infill and 5 walls all around. The holes are designed for M3 heat set inserts (i used the CNC kitchen ones in mine) You will also…
- Pobrania
- 93
- Polubienia
- 11
- Ocena
- 0
P
PrintablesFishbone Workshop
Backplate-Integrated Tripod for CFM PHONE 2 PRO
DISCLAIMER: I printed this project, but I didn't tested with actual CFM Phone. I'm open to feedback if you find something wrong with this project. Bill of materials: Printed parts (print CMF_BIT_LOST_PROTECTION two times) 2x M2x6 bolt 4x…
- Pobrania
- 93
- Polubienia
- 65
- Ocena
- 0
P
PrintablesDCfactory
CFMOTO 450MT Seat rubber cushion (6KJ0-130204, 6KM0-130205)
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
- Pobrania
- 85
- Polubienia
- 9
- Ocena
- 0
P
PrintablesPatrick
Preload nut adjuster 14mm (fits perfect for CFMoto 450MT)
Print 100% infill, doesn't make sense to print hollow.
- Pobrania
- 84
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTFro3
Grow Tent Negative Pressure High CFM Support Mounts
Stop Negative Pressure Collapse! If you’re running a high-CFM exhaust fan in your grow tent, you’ve probably noticed the sides getting sucked in due to negative pressure. This not only reduces your available grow space but also gives the…
- Pobrania
- 81
- Polubienia
- 29
- Ocena
- 0
P
PrintablesBostra
Mirror pad - CFMOTO GT650
Kvůli špatné viditelnosti dozadu přes zpětné zrcátka jsem vytvořil tento model. Toto navýšení o 2 cm je dostačující pro lepší viditelnost. Výška vrstvy: 0,2 Perimetry: 3 Plných vrstev: Vrchní 5 Spodní 4 Hustota výplně: 20% Vzor výplně:…
- Pobrania
- 78
- Polubienia
- 17
- Ocena
- 0
P
PrintablesBonticus
CFMoto Ibex 450MT Seat Bumper
This is a frame-side replacement for the seat bumpers on the ibex 450/mt. If using these, you will want to remove the two pads on the seat (if not lost already). It prints in connected halves that fold into the final piece to avoid the…
- Pobrania
- 75
- Polubienia
- 19
- Ocena
- 0
P
PrintablesJakub Jurczyk
CFMoto 450MT - Tail tidy cable hole plugs
Simple plugs with holes to guide blinker/licence plate light cables through the hole blocking water/dust/mud and other bad things. Printed in TPU 95A, 100% infill (for maximum water-tightness) Any harder materials might cause issues with…
- Pobrania
- 67
- Polubienia
- 8
- Ocena
- 0
P
PrintablesArtTim Тимур
Future Eyes button holder for the CFMOTO 450MT IBEX
Future Eyes button holder for the CFMOTO 450MT IBEX motorcycle. In the photo there is a button from Future Eyes F20P
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSlawoFu
CFmoto ATV seat damper
Rubber damper for the seat of your CFmoto 800/850/1000 ATV. After some time they are wearing out, so it is good to have a spare one around. Original part number: 8030-130211 Recommended print settings: material : TPU or any other…
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMarkus710
Tablet Holder CFMOTO 450MT
This tablet mount was designed specifically for the CFMOTO 450MT and fits the Samsung Galaxy Tab Active3 (8") . It provides a stable and secure mounting solution for using your tablet as a navigation or control device on the motorcycle.…
- Pobrania
- 58
- Polubienia
- 8
- Ocena
- 0
P
PrintablesGildenstern
Ego 530CFM Blower Hook
Simple hook to hang an Ego 530 CFM blower on a wall. Printed in PLA with 4 outlines, 20% infill was plenty strong for me.
- Pobrania
- 53
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMFM Industry
Suporte Comando Luz CFMOTO 450MT
Suporte Comando Luz CFMOTO 450MT para aplicar sem a proteção de mãos original.
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAleix
Soporte. asiento cfmoto 450mt
Soporte de asietno de una cfmoto 450mt
- Pobrania
- 44
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMason Schulte
CFMoto-450SS-450SR-Radiator Guard Covers
I recommend printing in ABS and using acetone to get nice smoothing. Way cheaper than buying off suppliers (~$25) and more color variety. It does not have the clip section like the injection molded version, but its kind of unnecessary.…
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 5
P
PrintablesPiercet
Accessory tip adaptor for Ego 480CFM electric power leaf Blower
I have a slightly older Ego 480CFM electric battery powered blower, and I wanted to use the fan tip from the newer 530cfm unit with mine. unfortunately, they don't fit... Until now! You will need 2 self tapping screws or rivets to install…
- Pobrania
- 44
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBonticus
CFMoto Ibex 450 / MT Carpuride W603d Mount
Simple model that lets you mount your Carpuride w603d and a tire pressure monitor to an ibex 450/450MT. It includes a camera mount for the front camera. The windshield is still fully adjustable and just clears the camera wire when fully…
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBumm
Lego Jet Engines: CFM-56 and IAE V-2500
I made some engines for my own Lego plane. The holes are too small for the lego part so you have to make them bigger.
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPatrick
CFMoto 450MT Acerbis Bashplate Adapter for Lifts
Owners of this particular Bashplate who tried to lift their bike will know it's basically impossible to lift the bike evenly with a standard flat-lift. For me it leaned backwards + to the side-stand side. I printed it in TPU 100% infill…
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 5
P
PrintablesNeil Baker
18v Ryobi 210 CFM leaf blower wall mount
This is a very simple wall mount for the 18v 210 CFM Ryobi leaf blower. It may fit other blowers as well, I just have not tested them. The smaller side fits toward the wall. Simply hold the blower slightly higher the than the mount where…
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJan Karásek
CFMOTO Wheel cap with logo
Wheel caps for CFMOTO Gladiator. The front and back covers have different depths. The logo is printed separately and then I glued it with superglue. PETG and the filling 25% is OK. Tested on CFMOTO X625-A.
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMason Schulte
CFMoto 450SS/SR Frame Insert
This is a custom frame insert for the 450SS and SR models. You will need 2 of them as they are copied versions of themselves. Recommended print info: ABS Filament, Acetone Curing (If you want a polished Finish), Topmost Ironing (To avoid…
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRixRoyale
CFMoto 450MT, Rear Rack Dash Cam Mount
CFMoto 450MT, Rear Rack Dash Cam Mount. Printed with PETG Filament. Include Fusion 360 Design File for Model Remix. Material Needed : 8 x M3 Heat Set Inserts, 4 x 8mm M3 Bolt & 4 x 15mm M3 Bolt
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAndreW
Kennzeichen Halter klappbar für CFMoto CForce 450
Remix - angepasst für eine CFMoto 450S mit Frontbügel
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesW6IWN
Chameleon Antenna CFM34 Srcew On Base Cap
Print with PTEG filament. Apply 3/8-24 thread heat insert with soldering iron. Be sure to press in enough that the cap with screw flush to the mast. Check while still hot incase any adjustments need to be made. Don't forget to unplug your…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTeknikFrik
UMM2028 Base Mount for CFMoto 450MT
UMM2028 system is just a name to group compatible models. Uses 20 mm horizontal x 28 mm vertical hole spacing. Needs longer than stock screws for mounting to top of stock console. Needs M3 melt inserts for mounting the additional mounts.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSlawoFu
CFmoto 520 (2024+) small toolbox cover
This is a cover of a small toolbox in CFmoto 520 (new - 2024 and up). If after every muddy trip, you end up with a small toolbox full of mud - that cover is what you need. Recommended printing settings material: PETG layer height: 0.2mm…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 5
P
PrintablesSpoticusMaximus
0.5 Inch Hose to Mastercool 3cfm Pump Exhaust Adapter
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working…
- Pobrania
- 24
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFichte
CFMoto Cforce Trägereinsatz 450L (2024)
Dies ist eine Abdeckung für den Front oder Heckträger der CFMoto CForce 450 Wurde mit PLA 60% Infill Gedruckt
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPelice
CFMoto ATV CForce External light mount
Supports to mount external light to my atv (CfMoto Cforce 600). Easy to print and mount. Better to print with PETG
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
Printablesinjectx
Cover for TomTom Rider 4xx w. CFMoto logo
Model already oriented for printing You can add a color to the logo layer just like I did
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCameron Payton
Gromet Collar For CLX700 CFMOTO Motorcycle
I bought These Decorative Frame Hole Covers from Aliexpress and needed a collar to go in the rubber gromet collar, so just quickly made this up though probably not even needed but I hate deforming grommets with screws. I only had 25mm M6…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
Printablesoptik8
Support Ecran Carpuride W702plus sur CFMoto MT800ES
Voici mon travail pour installer mon écran Carpuride W702plus sur ma CFMoto 800MTES. Il y a les plans Solidworks et le gcode PrusaSlicer pour du PA12 Sunlu, buse HF0.6mm
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKutie Keebs
Motorcycle PhoneHolder Windshield Bar CFMOTO 700MT
On the CFMOTO 700 MT there was no way to use a clip/claw phone holder on the windshield bar. It was too slim and to smooth. I redesigned the bar what is basically adding thickness to the middle of that bar. So the connection points stay…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarik Komarik
CFMoto 450MT (Ibex) topcase mount stencil for SHAD
Well well well, a rather dumb idea, isn't it? (Update after a month of use) It's a rather good idea. It recently survived a pretty bad crash which tore off the bottom of a Shad SH37 top case and sent it flying, the cutting board shows…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesStadi
CFMoto Cforce 450 Schutzkappe Zündschloss
Schutzkappe für das Zündschloss der Cforce 450, passt evtl. auch bei anderen Modellen. Gedruckt aus TPU 85A
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMakers Workshop
CFMOTO 450MT Spot Light Switch Mount
Ergonomic mount for the spotlight switch that gives the rider quick access to the high beam switch to dip the lights for on-coming traffic. This mount molds and screws to the bike using the original mounting screw for the indicator…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJC
CFMOTO 650 MT/Adventura GARMIN Power-Switch mount
CFMOTO 650 MT/Adventura GARMIN Power-Switch mount I burned out a Healtech Electronics relay module. Don't know how. Supply fuse never blew. Some internal component failed. Ran fine for a year and a half. Now I needed something different.…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLionel Keeping
Key Cover for CFMoto SXS Key
This key cover is modeled after the stock key that comes with the SXS. I wanted a red cover that would be more visible if it was dropped or misplaced while outside so I made this and printed in red TPU. I printed with manual snug grid…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJC
CFMOTO 650 MT / Adventura Garmin ZUMO XT GPS Mount
CFMOTO 650 Adventura / MT Garmin ZUMO XT GPS Mount I drew this up in AutoCad and SendCutSend laser cut this file out of ¼" thick 6061-T6 aluminum, I then cut out my washers, deburred, primed and texture painted. From my seat height and…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPo_temkin
CFMOTO 800 MT-X Rear Shock Mud Cover
Have a nice day, everyone! I won't be wrong if I say that I know no one owner who is satisfied with the stock rear shock mud cover. As of April 7th, there is no available tuning on AliExpress or anywhere else to address this issue. Need…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesB Hare
CFMoto CLX 700 Tag bracket - Horizontal
Printed in PETGCF have been using it without issue. Plate adds way more rigidity than I anticipated, so its overbuilt. New to designing in 3D, model may be horribly optimized. I really have no idea what I'm doing.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDelta3D_cl
Llave Regulacion PreCarga 450MT CFMoto IBEX
Llave reguladora de Pre-Carga para CFMoto/Ibex 450MT Regula con facilidad la Pre-Carga de la suspensión delantera de tu motocicletas CFMoto 450MT, con esta llave Tipo Circular o Tipo Cruceta, hemos incluido una marca indicadora para que…
- Pobrania
- 11
- Polubienia
- 4
- Ocena
- 0
P
Printablesyanekr
CFMOTO 450MT key holder
The ultimate wall-mounted key holder for CFMOTO 450MT-RX owners and adventure riders! Tired of misplacing your motorcycle keys? Upgrade your garage, entryway, or man cave with this stylish and practical key rack. The model features a bold…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPo_temkin
CFMOTO 800 MT-X Gear Position Sensor Cover and Spacer
Have a nice day, everyone! Replacing the original front sprocket cover is quite a popular tuning; nevertheless, I didn't find a particular set especially for the MTX, but found many options for the KTM 790/890 and others. The front…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCrapaudMulticolore
Original Size CFM Phone 2 pro Mods-add Magnet
This is a CAD work, it is not currently done due to a lack of time and materials. I do not have the CFM Phone 2 Pro The first goal was to add an external case integrating a case for the CFM BUDS 2 , an X4 16650 (or 14650) external…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGawel C
CfMoto 450mt front brake reservoir
CfMoto 450mt front brake reservoir
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJC
CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation
CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation Rear Tail light is hard to see if someone is riding behind you. Safety First. Don't want to get rear ended. All my friends say my stock tail light is hard to see when they are…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJim
CFMC Keychain
Keychain for my brothers and sisters in the Chicago FM Club.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printableshirtbach
Reusable filter frame for 100CFM Panasonic Intelli-Balance ERVs
This 3D model is designed to fit in place of the intake filter on FV-10VE1 and FV-10VEC1 Panasonic Intelli-Balance ERVs. It serves as a basis for creating a reusable filter, provided you have a larger upfront filter installed before the…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesgompa oneal
cfm phone pro 2 cigarette case
cigarette case for the cfm phone pro 2
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarius Mihasan
Turn signal brackets for CFMoto 450MT (Ibex)
The AliExpress tail tidy is not compatible with the Westwind luggage rack . The turn signal hit the rack, so I designed some repositioning brackets. For better wire management, I have designed a cover over the tail tidy thing that also…
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTeknikFrik
CFMOTO 450MT Seat Rubber Damper Plug replacement (6KJ0-130204)
Printed with 82A TPU, and 50% infill seems ok. With 95A about 25% is better. At 10mm height, go to 0.10 mm layers for better shaped tip.
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSokol
Speaker set cfm165vo.1
Speaker set cfm165vo.1 plastic details
- Pobrania
- 5
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPo_temkin
CFMOTO 800 MT-X Lazy Chain Tension Gauge
Have a nice day, everyone! Just a simple tool for a fast chain-tension check. According to the manual, when pulling the chain down, the distance between the chain and the lowest point of the swingarm should not exceed 50 mm. In my humble…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMiles
EGO 530 CFM Mounting Bracket
This is a wall-mount bracket for the EGO 530 CFM leaf blower that allows it to be securely mounted to a wall. Printed in Prusament PETG. 3 Perimeters and 35% infill. 2 #6 or #8 flathead screws are needed for mounting.
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesItsEndi
Gas Cap GoPro Mount for CFMoto
This is a GoPro (Action Cam) mount for CFMoto Motorcycles which can be mounted onto the Gas-Cap Ring for awesome On-Board Shots that were inspired by racing Angles Because this is mounted on top of the Ring instead of replacing it, you…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printablessomeawe
Cisco NXA-FAN-30CFM-B and N3K-3232C Fan Silencing
This set of files is provided with use at your own risk warning, the switch will have much less cooling when used as I intend. I did not do anything to the PSU fans which are still somewhat noisy because on my N3k-3232, the PSU fans are…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printablesalex alex
CFMoto 450nk Mirror plugs
3d printed replacement for original rubber mirror plugs(i lost one) with a small indent for easier removal
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPo_temkin
CFMOTO 800 MT-X Oiler Mount Project
Have a nice day, everyone! First of all, this project is more about how to mount an oiler on the 800 MT-X than a solution that will fit everyone. I originally designed it for a PDOiler that had been used on a V-Strom since 2018 (if I'm…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
Printablesyanekr
CFMOTO key rack
A sleek, wall-mounted key holder featuring the prominent CFMOTO logo. This practical 3D model is designed with a sturdy rectangular base and features five integrated lower hooks, making it perfect for organizing keys, lanyards, or light…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMadeByCelsius
iPower 4 Inch 130 CFM Inline Duct Fan Cover
Made in may of 2023. Remove the front cover and put this over the fan. I use two tubes because one wasn't long enough. Doesn't reach far enough. I made that little extender piece and taped the outside together. You might want to cut…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBonesy
Nexus Miner 40mm Fan Mount HIGH CFM Fan
Nexus Miner 40mm fan mount, with a duct to force air onto the VREG heatsink. Originally didn't have fins diverting air but that had a dead zone for air output, although there are 2 low flow areas and it may seem counterintuitive this…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNorth9Stand
Cfmoto 450mt ram mount adapter and anti shake plate
This remix adds a RAM mount adapter to the original CFMOTO 450MT windshield anti-shake plate. The modification provides a mounting point for a RAM-compatible phone holder, positioning the phone above the bike’s instrument display and as…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPo_temkin
CFMOTO 800 MT-X Shockproof Phone Holder Adapter
Have a nice day, everyone! I like to use phone navigation when I ride, but I'm not a fan of handlebar mounts because I find them dangerous, IMHO. So I decided to buy a popular shockproof phone holder and mount it onto the big navigation…
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
PrintablesVikman
plaque Cfmoto 800 MT
Petite plaque à coller avec du double face sur le protège main droit des Cfmoto 800 MT, MT-X. Pour le bicolore, faire une pause à la 9 eme couche. ( 2.5 gr et 8 min d'impression ) N'hésitez pas a faire un retour ;-)
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMakers Workshop
DMD2 Mounting stabilizer for CFMOTO 450MT
This is a special spacer to stop the tablet and mount from bouncing around when going over rough terrain. The spacer works by spreading the load over the whole top cross section of the instrument cluster/tower. The 450MT's tower is made…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
0.5 Inch Hose to Mastercool 3cfm Pump Exhaust Adapter
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working…